[Amps] [Fwd: Re: [Moon-net] 4CX250B in P-P 2m?], Dr. David Kirkby, 2006/03/31

• Re: [Amps] [Fwd: Re: [Moon-net] 4CX250B in P-P 2m?], kf4yox, 2006/03/31

[Amps] 813', carl s., 2006/03/31

• Re: [Amps] 813', Will Matney, 2006/03/31

Re: [Amps] [Moon-net] 4CX250B in P-P 2m?, Dr. David Kirkby, 2006/03/31

• Re: [Amps] [Moon-net] 4CX250B in P-P 2m?, Ian White GM3SEK, 2006/03/31
• Re: [Amps] [Moon-net] 4CX250B in P-P 2m?, Bill Fuqua, 2006/03/31
• Re: [Amps] [Moon-net] 4CX250B in P-P 2m?, Steve Katz, 2006/03/31
  • Re: [Amps] [Moon-net] 4CX250B in P-P 2m?, Winfried Kriegl, 2006/03/31

[Amps] HP 3336B, Will Matney, 2006/03/30

• Re: [Amps] HP 3336B, Gary Schafer, 2006/03/30
• Re: [Amps] HP 3336B, Will Matney, 2006/03/31
• Re: [Amps] HP 3336B, Will Matney, 2006/03/31

[Amps] PYGMY Caps., hermans, 2006/03/30

• Re: [Amps] PYGMY Caps., HOWARDLYON, 2006/03/30

[Amps] tube impedance, figuring tank circuit values, Partain, Chuck, 2006/03/30

• Re: [Amps] tube impedance, figuring tank circuit values, Will Matney, 2006/03/30
• Re: [Amps] tube impedance, figuring tank circuit values, Phil Clements, 2006/03/30
  • Re: [Amps] tube impedance, figuring tank circuit values, Gary Patterson, 2006/03/31
    • Re: [Amps] tube impedance, figuring tank circuit values, Partain, Chuck, 2006/03/31
    • Re: [Amps] tube impedance, figuring tank circuit values, Will Matney, 2006/03/31
• Message not available
  • Re: [Amps] tube impedance, figuring tank circuit values, Bill Turner, 2006/03/31
• Re: [Amps] tube impedance, figuring tank circuit values, TexasRF, 2006/03/31
• Re: [Amps] tube impedance, figuring tank circuit values, TexasRF, 2006/03/31
• Re: [Amps] tube impedance, figuring tank circuit values, Jim Kearman, 2006/03/31

[Amps] AL80A, Georgens, Tom, 2006/03/30

• Re: [Amps] AL80A, R, 2006/03/30
• Re: [Amps] AL80A, Georgens, Tom, 2006/03/30
  • Re: [Amps] AL80A, R, 2006/03/31
• Re: [Amps] AL80A, Peter Chadwick, 2006/03/31

Re: [Amps]SS vs. Tubes (was  "I gotta tell this"), Peter Chadwick, 2006/03/30

• Re: [Amps] SS vs. Tubes (was "I gotta tell this"), Vic K2VCO, 2006/03/30

[Amps] SS vs. Tubes (was "I gotta tell this"), Theo Bellamy, 2006/03/29

• Re: [Amps] SS vs. Tubes (was "I gotta tell this"), Bill Turner, 2006/03/29
• Re: [Amps] SS vs. Tubes, PA3DUV, 2006/03/29
• Re: [Amps] SS vs. Tubes (was "I gotta tell this"), Gary Smith, 2006/03/29
• Re: [Amps] SS vs. Tubes (was "I gotta tell this"), N7HIY, 2006/03/29

[Amps] political correctness, John T. M. Lyles, 2006/03/29

• Message not available
  • [Amps] correctness? who decides?, John T. M. Lyles, 2006/03/29
    • Re: [Amps] correctness? who decides?, Conrad_G0RUZ, 2006/03/29

Re: [Amps] "I gotta tell this", Will Matney, 2006/03/28

• Re: [Amps] "I gotta tell this", Jim Tonne, 2006/03/28
• Re: [Amps] "I gotta tell this", Osten B Magnusson, 2006/03/28
• Re: [Amps] "I gotta tell this", N7HIY, 2006/03/28
  • Re: [Amps] "I gotta tell this", Bob Easterbrooks, 2006/03/28
    • Re: [Amps] "I gotta tell this", Bill Turner, 2006/03/28
• Re: [Amps] "I gotta tell this", Tony King - W4ZT, 2006/03/28
  • Re: [Amps] "I gotta tell this", Will Matney, 2006/03/28
    • Re: [Amps] "I gotta tell this", Larry Carman, 2006/03/29
    • Re: [Amps] "I gotta tell this", Will Matney, 2006/03/29
• Re: [Amps] "I gotta tell this", m.ford, 2006/03/28
  • Re: [Amps] "I gotta tell this", aborg, 2006/03/29
    • Re: [Amps] "I gotta tell this", R, 2006/03/29
• Re: [Amps] "I gotta tell this", Jim Kearman, 2006/03/28
• Re: [Amps] "I gotta tell this", Jim Kearman, 2006/03/29
  • Re: [Amps] "I gotta tell this", Bill Turner, 2006/03/29
    • Re: [Amps] "I gotta tell this", N7HIY, 2006/03/29
    • Re: [Amps] "I gotta tell this", carl s., 2006/03/29
    • Re: [Amps] "I gotta tell this", Theo Bellamy, 2006/03/29
    • Re: [Amps] "I gotta tell this", carl s., 2006/03/29
    • Re: [Amps] "I gotta tell this", Kenneth D. Grimm, K4XL, 2006/03/29
    • Re: [Amps] "I gotta tell this", carl s., 2006/03/29
    • Re: [Amps] "I gotta tell this", Gary Smith, 2006/03/29
    • Re: [Amps] "I gotta tell this", Bill Turner, 2006/03/29
  • Re: [Amps] "I gotta tell this", N7HIY, 2006/03/29
    • Re: [Amps] "I gotta tell this", Jim Tonne, 2006/03/29
    • Re: [Amps] "I gotta tell this", Bill Turner, 2006/03/29
    • Re: [Amps] "I gotta tell this", Vic K2VCO, 2006/03/29
    • Re: [Amps] "I gotta tell this", Bill Turner, 2006/03/29
  • Re: [Amps] "I gotta tell this", R, 2006/03/29
• Re: [Amps] "I gotta tell this", Peter Chadwick, 2006/03/30
  • Re: [Amps] "I gotta tell this", Michael Tope, 2006/03/30
  • Re: [Amps] "I gotta tell this", Theo Bellamy, 2006/03/30
    • Re: [Amps] "I gotta tell this", R, 2006/03/30
  • Re: [Amps] "I gotta tell this", k7fm, 2006/03/30
    • Re: [Amps] "I gotta tell this", Theo Bellamy, 2006/03/30
    • Re: [Amps] "I gotta tell this", Gary Smith, 2006/03/30
    • Re: [Amps] "I gotta tell this", Gary Smith, 2006/03/30

[Amps] estimating the impedance of amp input and outputs?, Dan Sawyer, 2006/03/28

• Re: [Amps] estimating the impedance of amp input and outputs?, Will Matney, 2006/03/28
• Re: [Amps] estimating the impedance of amp input and outputs?, Peter Chadwick, 2006/03/28

[Amps] 7633 scope TSPA, John T. M. Lyles, 2006/03/27

• Re: [Amps] 7633 scope TSPA, Will Matney, 2006/03/27

[Amps] rf choke on output, Partain, Chuck, 2006/03/27

• Re: [Amps] rf choke on output, Vic Rosenthal, 2006/03/27
  • Re: [Amps] rf choke on output, GGLL, 2006/03/27
• Re: [Amps] rf choke on output, R, 2006/03/28
• Re: [Amps] rf choke on output, Peter Chadwick, 2006/03/28
  • Re: [Amps] rf choke on output, GGLL, 2006/03/28
    • Re: [Amps] rf choke on output, m.ford, 2006/03/28

[Amps] Need some 220K 2 watt carbon resistors, Chris Fox NI4L, 2006/03/26

• Re: [Amps] Need some 220K 2 watt carbon resistors, Gary Schafer, 2006/03/26
  • Re: [Amps] Need some 220K 2 watt carbon resistors, Ian White GM3SEK, 2006/03/27
  • Re: [Amps] Need some 220K 2 watt carbon resistors, Steve Thompson, 2006/03/27
    • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/27
    • Re: [Amps] Need some 220K 2 watt carbon resistors, John Popelish, 2006/03/27
• Re: [Amps] Need some 220K 2 watt carbon resistors, Mike McCarthy, W1NR, 2006/03/27
  • Re: [Amps] Need some 220K 2 watt carbon resistors, Ian White GM3SEK, 2006/03/28
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Mike McCarthy, W1NR, 2006/03/28
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Ian White GM3SEK, 2006/03/28
    • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/28
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Will Matney, 2006/03/28
    • Re: [Amps] Need some 220K 2 watt carbon resistors, KD7QAE, 2006/03/29
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Jim Tonne, 2006/03/29
    • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/29
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Gary Smith, 2006/03/29
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Ian White GM3SEK, 2006/03/29
    • Re: [Amps] Need some 220K 2 watt carbon resistors, Gary Smith, 2006/03/29
• Re: [Amps] Need some 220K 2 watt carbon resistors, ValErwin, 2006/03/26
  • Re: [Amps] Need some 220K 2 watt carbon resistors, Will Matney, 2006/03/26
    • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/27
• Re: [Amps] Need some 220K 2 watt carbon resistors, Peter Chadwick, 2006/03/27
• Re: [Amps] Need some 220K 2 watt carbon resistors, Jim Kearman, 2006/03/27
  • Re: [Amps] Need some 220K 2 watt carbon resistors, GGLL, 2006/03/27
    • Re: [Amps] Need some 220K 2 watt carbon resistors, k7fm, 2006/03/27
• Re: [Amps] Need some 220K 2 watt carbon resistors, Jim Kearman, 2006/03/28
  • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/28
• Re: [Amps] Need some 220K 2 watt carbon resistors, Jim Kearman, 2006/03/28
  • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/28
• Re: [Amps] Need some 220K 2 watt carbon resistors, Peter Chadwick, 2006/03/29
  • Re: [Amps] Need some 220K 2 watt carbon resistors, GGLL, 2006/03/29
  • Re: [Amps] Need some 220K 2 watt carbon resistors, R, 2006/03/29
• Re: [Amps] Need some 220K 2 watt carbon resistors, Peter Chadwick, 2006/03/29

[Amps] Tek Scope, Will Matney, 2006/03/25

• Message not available
  • Re: [Amps] Tek Scope, Will Matney, 2006/03/26
    • Message not available
    • Re: [Amps] Tek Scope, Will Matney, 2006/03/26

[Amps] tube C + stray C, Scott Townley, 2006/03/25

• Re: [Amps] tube C + stray C, Vic K2VCO, 2006/03/25
• Re: [Amps] tube C + stray C, Steve Thompson, 2006/03/26

[Amps] Obnoxious Henry blower?, PlanerGuy, 2006/03/25

• Re: [Amps] Obnoxious Henry blower?, Kevin LaHaie, 2006/03/25

[Amps] I gotta tell this, Will Matney, 2006/03/24

• Re: [Amps] I gotta tell this, m.ford, 2006/03/24
• Message not available
  • Re: [Amps] I gotta tell this, Will Matney, 2006/03/25
• Re: [Amps] I gotta tell this, Gudguyham, 2006/03/24
• Re: [Amps] I gotta tell this, Will Matney, 2006/03/24

[Amps] Help Please: Power Amplifiers @ 100MHz, cm215, 2006/03/24

• Re: [Amps] Help Please: Power Amplifiers @ 100MHz, Will Matney, 2006/03/24
• Re: [Amps] Help Please: Power Amplifiers @ 100MHz, Vic K2VCO, 2006/03/24
  • Re: [Amps] Help Please: Power Amplifiers @ 100MHz, R, 2006/03/25

[Amps] slightly off topic - bandpass filter software ?, Dan Sawyer, 2006/03/23

• Re: [Amps] slightly off topic - bandpass filter software ?, k7fm, 2006/03/24
  • Re: [Amps] slightly off topic - bandpass filter software ?, Jim Tonne, 2006/03/24
• Re: [Amps] slightly off topic - bandpass filter software ?, Colin Lamb, 2006/03/24

[Amps] Doorknob caps in LK-500ZC, Scott Manthe, 2006/03/23

• Re: [Amps] Doorknob caps in LK-500ZC, Scott Manthe, 2006/03/23
• Re: [Amps] Doorknob caps in LK-500ZC, Phil Clements, 2006/03/23

[Amps] Gonset GSB-201 Mods, KA9S - 2, 2006/03/23

• Re: [Amps] Gonset GSB-201 Mods, Jim Tonne, 2006/03/23
  • Re: [Amps] Gonset GSB-201 Mods, R, 2006/03/23
    • Re: [Amps] Gonset GSB-201 Mods, KA9S - 2, 2006/03/23
  • Re: [Amps] Gonset GSB-201 Mods, KA9S - 2, 2006/03/23
    • Re: [Amps] Gonset GSB-201 Mods, Jim Tonne, 2006/03/23
• Re: [Amps] Gonset GSB-201 Mods, Colin Lamb, 2006/03/23

[Amps] measuring secondary resistance TSPA, John T. M. Lyles, 2006/03/23

• Message not available
  • Re: [Amps] measuring secondary resistance TSPA, Steve Thompson, 2006/03/27

[Amps] Tuned input board on SB-220, Ed Dial, 2006/03/22

• Re: [Amps] Tuned input board on SB-220, noddie, 2006/03/22
  • Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/22
    • Re: [Amps] Tuned input board on SB-220, k7rdx, 2006/03/23
    • Re: [Amps] Tuned input board on SB-220, Bob Maser, 2006/03/23
    • Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/23
• Re: [Amps] Tuned input board on SB-220, Dino Darling, 2006/03/22
  • Re: [Amps] Tuned input board on SB-220, noddie, 2006/03/22
• Re: [Amps] Tuned input board on SB-220, Bob Nielsen, 2006/03/22
• Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/24
• Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/24
  • Re: [Amps] Tuned input board on SB-220, k7rdx, 2006/03/24
    • Re: [Amps] Tuned input board on SB-220, Roger D Johnson, 2006/03/24
    • Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/24
    • Re: [Amps] Tuned input board on SB-220, R, 2006/03/25
    • Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/24
• Re: [Amps] Tuned input board on SB-220, Roger D Johnson, 2006/03/24
  • Re: [Amps] Tuned input board on SB-220, Gary Schafer, 2006/03/24
  • Re: [Amps] Tuned input board on SB-220, Bill Fuqua, 2006/03/24
• Re: [Amps] Tuned input board on SB-220, Peter Chadwick, 2006/03/25
  • Re: [Amps] Tuned input board on SB-220, Karl-Arne Markström, 2006/03/25

[Amps] CD Cap, Rich, 2006/03/22

• Re: [Amps] CD Cap, Ian White GM3SEK, 2006/03/23
• Re: [Amps] CD Cap, Rich, 2006/03/23
  • Re: [Amps] CD Cap, Ian White GM3SEK, 2006/03/24
    • Re: [Amps] CD Cap, Will Matney, 2006/03/24
    • Re: [Amps] CD Cap, Ian White GM3SEK, 2006/03/24
• Re: [Amps] CD Cap, Rich, 2006/03/24
  • Re: [Amps] CD Cap, Will Matney, 2006/03/24
  • Re: [Amps] CD Cap, Steve Thompson, 2006/03/25
  • Re: [Amps] CD Cap, Ian White GM3SEK, 2006/03/25

[Amps] more on heavy transformers TSPA, John T. M. Lyles, 2006/03/22

• Re: [Amps] more on heavy transformers TSPA, Will Matney, 2006/03/22
• Re: [Amps] more on heavy transformers TSPA, Steve Thompson, 2006/03/22

[Amps] ESI 253, Will Matney, 2006/03/21

• Re: [Amps] ESI 253, Will Matney, 2006/03/21

[Amps] Big transformer request TSPA, John T. M. Lyles, 2006/03/21

• Re: [Amps] Big transformer request TSPA, Will Matney, 2006/03/21
• Re: [Amps] Big transformer request TSPA, Steve Thompson, 2006/03/22
• Re: [Amps] Big transformer request TSPA, TexasRF, 2006/03/22

[Amps] Quick question, Will Matney, 2006/03/21

• Re: [Amps] Quick question, Bill Turner, 2006/03/22

[Amps] Henry 2K Classic X question, PlanerGuy, 2006/03/21

• Re: [Amps] Henry 2K Classic X question, Steve Katz, 2006/03/21

Re: [Amps] RE : MW Oven Transformer question, Will Matney, 2006/03/21

• [Amps] RE : MW Oven Transformer question, Larry Carman, 2006/03/22
  • Re: [Amps] RE : MW Oven Transformer question, Bill Turner, 2006/03/22
    • Re: [Amps] RE : MW Oven Transformer question, Will Matney, 2006/03/22
    • Re: [Amps] RE : MW Oven Transformer question, Larry Carman, 2006/03/22
    • Re: [Amps] RE : MW Oven Transformer question, Bill Turner, 2006/03/22
    • Re: [Amps] RE : MW Oven Transformer question, R, 2006/03/23

[Amps] MW Oven Transformer question, TexasRF, 2006/03/21

• Re: [Amps] MW Oven Transformer question, John Popelish, 2006/03/21
• Re: [Amps] MW Oven Transformer question, John Popelish, 2006/03/21
  • Re: [Amps] MW Oven Transformer question, Will Matney, 2006/03/21
• Re: [Amps] MW Oven Transformer question, TexasRF, 2006/03/21
  • Re: [Amps] MW Oven Transformer question, Will Matney, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, Tony King - W4ZT, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, Will Matney, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, John Popelish, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, Tony King - W4ZT, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, John Popelish, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, Will Matney, 2006/03/21
    • Re: [Amps] MW Oven Transformer question, Alek Petkovic, 2006/03/21

[Amps] Capacitor plague, Will Matney, 2006/03/20

• Re: [Amps] Capacitor plague, N7HIY, 2006/03/20
  • Re: [Amps] Capacitor plague, Will Matney, 2006/03/20
    • Re: [Amps] Capacitor plague, Will Matney, 2006/03/20

[Amps] Something I just can't figure!, Will Matney, 2006/03/20

• Re: [Amps] Something I just can't figure!, Alek Petkovic, 2006/03/20

[Amps] series-connecting a split-stator variable cap, Scott Townley, 2006/03/19

• Re: [Amps] series-connecting a split-stator variable cap, Bill Turner, 2006/03/20
• Re: [Amps] series-connecting a split-stator variable cap, Will Matney, 2006/03/20
  • Re: [Amps] series-connecting a split-stator variable cap, Will Matney, 2006/03/20
  • Re: [Amps] series-connecting a split-stator variable cap, Val, 2006/03/20
    • Re: [Amps] series-connecting a split-stator variable cap, Will Matney, 2006/03/20
    • Re: [Amps] series-connecting a split-stator variable cap, Will Matney, 2006/03/20
• Re: [Amps] series-connecting a split-stator variable cap, pegasus, 2006/03/20
  • Re: [Amps] series-connecting a split-stator variable cap, Will Matney, 2006/03/20
• Re: [Amps] series-connecting a split-stator variable cap, Vic K2VCO, 2006/03/20
• Re: [Amps] series-connecting a split-stator variable cap, Peter Chadwick, 2006/03/20
  • Re: [Amps] series-connecting a split-stator variable cap, k7fm, 2006/03/20

[Amps] low cost IRF-MOSFET amps......, Dick, 2006/03/18

• Re: [Amps] low cost IRF-MOSFET amps......, peter.voelpel, 2006/03/19

[Amps] Amp faceplates, Will Matney, 2006/03/17

• Message not available
  • Re: [Amps] Amp faceplates, Will Matney, 2006/03/18
    • Re: [Amps] Amp faceplates, John- W4DJ, 2006/03/18
    • Re: [Amps] Amp faceplates, Will Matney, 2006/03/18
• Re: [Amps] Amp faceplates, Bill Turner, 2006/03/19
  • Re: [Amps] Amp faceplates, k7rdx, 2006/03/19
  • Re: [Amps] Amp faceplates, Will Matney, 2006/03/19

[Amps] Unusual Solvent, HAROLD B MANDEL, 2006/03/17

• Re: [Amps] Unusual Solvent, Bill Turner, 2006/03/19
  • Re: [Amps] Unusual Solvent, R, 2006/03/19
• Re: [Amps] Unusual Solvent, Peter Chadwick, 2006/03/18
• Re: [Amps] Unusual Solvent, Robert Chudek, 2006/03/19

[Amps] Cleaning Stuff, Rich, 2006/03/17

• Re: [Amps] Cleaning Stuff, Bill Gode, Sr., 2006/03/17
  • Re: [Amps] Cleaning Stuff, Bill Turner, 2006/03/18
    • Re: [Amps] Cleaning Stuff, gdaught6, 2006/03/18
    • Re: [Amps] Cleaning Stuff, Bill Turner, 2006/03/19
• Re: [Amps] Cleaning Stuff, Will Matney, 2006/03/17

[Amps] Surfactants, Jim Kearman, 2006/03/17

• Re: [Amps] Surfactants, HAROLD B MANDEL, 2006/03/17
  • Re: [Amps] Surfactants, Bill Turner, 2006/03/18
• Re: [Amps] Surfactants, Jim Kearman, 2006/03/17
  • Re: [Amps] Surfactants, John/K4WJ, 2006/03/17
• Re: [Amps] Surfactants, Jim Kearman, 2006/03/17

[Amps] DRAKE L7 Plate meter update 2 and now PS, Marc Wullaert, 2006/03/17

• Re: [Amps] DRAKE L7 Plate meter update 2 and now PS, HAROLD B MANDEL, 2006/03/17
  • Re: [Amps] DRAKE L7 Plate meter update 2 and now PS, R, 2006/03/17
  • Re: [Amps] DRAKE L7 Plate meter update 2 and now PS, m.ford, 2006/03/17

[Amps] HV switching power supplys?, PlanerGuy, 2006/03/17

• Re: [Amps] HV switching power supplys?, PA3DUV, 2006/03/19
• Re: [Amps] HV switching power supplys?, HAROLD B MANDEL, 2006/03/17
  • [Amps] tube cooling requirements, peter.voelpel, 2006/03/17
    • Re: [Amps] tube cooling requirements, Dr. David Kirkby, 2006/03/17
• Re: [Amps] HV switching power supplys?, wc6w@juno.com, 2006/03/17
• Re: [Amps] HV switching power supplys?, PlanerGuy, 2006/03/17
  • Re: [Amps] HV switching power supplys?, Will Matney, 2006/03/17
    • Re: [Amps] HV switching power supplys?, Jim Tonne, 2006/03/17
  • Re: [Amps] HV switching power supplys?, Ian White GM3SEK, 2006/03/17
    • Re: [Amps] HV switching power supplys?, Keith Dutson, 2006/03/17
  • Re: [Amps] HV switching power supplys?, Bill Turner, 2006/03/18

[Amps] Happy birthday to..., Bill Turner, 2006/03/16

• Re: [Amps] Happy birthday to..., Joe DiPietro, N2UF, 2006/03/16
  • Re: [Amps] [SPAM] Re: Happy birthday to..., Bill Turner, 2006/03/16
• Re: [Amps] Happy birthday to..., Will Matney, 2006/03/16
  • Re: [Amps] Happy birthday to..., Jim Tonne, 2006/03/16
  • Re: [Amps] Happy birthday to..., Jerry Muller, 2006/03/16
  • Re: [Amps] Happy birthday to..., S. J. Blackwell, 2006/03/16
    • Re: [Amps] Happy birthday to..., Ed Swynar, 2006/03/16
    • Re: [Amps] Happy birthday to..., Mike Sawyer, 2006/03/16
    • Re: [Amps] Happy birthday to..., John Popelish, 2006/03/16
• Re: [Amps] Happy birthday to..., Partain, Chuck, 2006/03/16
• Re: [Amps] Happy birthday to..., HAROLD B MANDEL, 2006/03/16
• Re: [Amps] Happy birthday to..., HAROLD B MANDEL, 2006/03/16
  • Re: [Amps] Happy birthday to..., Philip Leonard WVØT, 2006/03/16

[Amps] ARRL Handbook Amp, FoxRun, 2006/03/16

• Re: [Amps] ARRL Handbook Amp, Bill Turner, 2006/03/16
  • Re: [Amps] ARRL Handbook Amp, Bob Maser, 2006/03/16
• Re: [Amps] ARRL Handbook Amp, Bob Maser, 2006/03/16

[Amps] Trichloroethene, Jim Kearman, 2006/03/15

• Re: [Amps] Trichloroethene, noddie, 2006/03/15
• Re: [Amps] Trichloroethene, gdaught6, 2006/03/16
  • [Amps] 10 meters mode for Dentron DTR-1200L?, Gert - K5WW, 2006/03/16
  • Re: [Amps] Trichloroethene, KD7QAE, 2006/03/16
• Re: [Amps] Trichloroethene, Bill Turner, 2006/03/16
• Re: [Amps] Trichloroethene, HAROLD B MANDEL, 2006/03/16
• Re: [Amps] Trichloroethene, Rex Lint, 2006/03/16
  • Re: [Amps] Trichloroethene, m.ford, 2006/03/16
  • Re: [Amps] Trichloroethene, Keith Dutson, 2006/03/16
  • Re: [Amps] Trichloroethene, crawfish, 2006/03/16
    • Re: [Amps] Trichloroethene, Bill Turner, 2006/03/17
    • Re: [Amps] Trichloroethene, Rex Lint, 2006/03/17
    • Re: [Amps] Trichloroethene, m.ford, 2006/03/17
    • Re: [Amps] Trichloroethene, David G4FTC, 2006/03/17
    • Re: [Amps] Trichloroethene, Gary Smith, 2006/03/17
    • Re: [Amps] Trichloroethene, "LA6LHA, Harald i Ålesund ", 2006/03/17
    • Re: [Amps] Trichloroethene, Jim Tonne, 2006/03/17
    • Re: [Amps] Trichloroethene, Jose M. Valdes R. YV5LIX, 2006/03/17
    • Re: [Amps] Trichloroethene, Keith Dutson, 2006/03/17
    • Re: [Amps] Trichloroethene, Vic K2VCO, 2006/03/17
    • Re: [Amps] Trichloroethene, Keith Dutson, 2006/03/17
    • Re: [Amps] Trichloroethene, Gary Smith, 2006/03/17
  • Re: [Amps] Trichloroethene, Bill Turner, 2006/03/17
• Re: [Amps] Trichloroethene, HAROLD B MANDEL, 2006/03/16
• Re: [Amps] Trichloroethene, Steve Katz, 2006/03/16
  • Re: [Amps] Trichloroethene, Bill Turner, 2006/03/17
• Re: [Amps] Trichloroethene, Jim Kearman, 2006/03/17
• Re: [Amps] Trichloroethene, HAROLD B MANDEL, 2006/03/17
  • Re: [Amps] Trichloroethene, "LA6LHA, Harald i Ålesund ", 2006/03/18

[Amps] increasing rf gain in driver stages ?, Dan Sawyer, 2006/03/15

• Re: [Amps] increasing rf gain in driver stages ?, Will Matney, 2006/03/15
  • Re: [Amps] increasing rf gain in driver stages ?, Dan Sawyer, 2006/03/16
    • Re: [Amps] increasing rf gain in driver stages ?, Will Matney, 2006/03/16
• Re: [Amps] increasing rf gain in driver stages ?, R, 2006/03/16
  • Re: [Amps] increasing rf gain in driver stages (sb-104) ?, Dan Sawyer, 2006/03/16
• Re: [Amps] increasing rf gain in driver stages ?, Bill Turner, 2006/03/16
• Re: [Amps] increasing rf gain in driver stages ?, Jim Kearman, 2006/03/16

[Amps] Washing equipment, N7KA, 2006/03/15

• Re: [Amps] Washing equipment, Jim Tonne, 2006/03/15
  • Re: [Amps] Washing equipment, R, 2006/03/16
    • Re: [Amps] Washing equipment, Bill Turner, 2006/03/16
  • Re: [Amps] Washing equipment, Ian White GM3SEK, 2006/03/16
    • Re: [Amps] Washing equipment, Bill Turner, 2006/03/16
    • Re: [Amps] Washing equipment, m.ford, 2006/03/16
• Re: [Amps] Washing equipment, Van K7VS, 2006/03/15
• Re: [Amps] Washing equipment, Jim Kearman, 2006/03/16

[Amps] Threads, Gene Bigham, 2006/03/15

• Re: [Amps] Threads, Bill Turner, 2006/03/15

[Amps] Boat-Anchor Cleanliness, HAROLD B MANDEL, 2006/03/15

• Re: [Amps] Boat-Anchor Cleanliness, peter.voelpel, 2006/03/15
• Re: [Amps] Boat-Anchor Cleanliness, HAROLD B MANDEL, 2006/03/15
• Re: [Amps] Boat-Anchor Cleanliness, TexasRF, 2006/03/15
  • Re: [Amps] Boat-Anchor Cleanliness, R, 2006/03/15
    • Re: [Amps] Boat-Anchor Cleanliness, noddie, 2006/03/15
• Re: [Amps] Boat-Anchor Cleanliness, Jim Kearman, 2006/03/15
  • Re: [Amps] Boat-Anchor Cleanliness, R, 2006/03/15
• Re: [Amps] Boat-Anchor Cleanliness, Jim Kearman, 2006/03/15

[Amps] CHASSIS, Rex Lint, 2006/03/15

• Re: [Amps] CHASSIS, Stein Roar Brobakken, 2006/03/15
• Re: [Amps] CHASSIS, R, 2006/03/15
• Re: [Amps] CHASSIS, N7KA, 2006/03/15
  • Re: [Amps] CHASSIS, R, 2006/03/16
    • Re: [Amps] CHASSIS, k7fm, 2006/03/16
    • Re: [Amps] CHASSIS, R, 2006/03/16
    • Re: [Amps] CHASSIS, Bob Nielsen, 2006/03/16
    • Re: [Amps] CHASSIS, Vic K2VCO, 2006/03/16
    • Re: [Amps] CHASSIS, Will Matney, 2006/03/16
    • Re: [Amps] CHASSIS, Larry Keith, 2006/03/16
    • Re: [Amps] CHASSIS, Will Matney, 2006/03/16
    • Re: [Amps] CHASSIS, Rex Lint, 2006/03/16
    • Re: [Amps] CHASSIS, Bill Turner, 2006/03/16
    • Re: [Amps] CHASSIS, gdaught6, 2006/03/16
• Re: [Amps] CHASSIS, Peter Chadwick, 2006/03/16
• Re: [Amps] CHASSIS, HAROLD B MANDEL, 2006/03/16

[Amps] Ameritron ALS-500M, Stein Roar Brobakken & LA6FJA/KI4KJP, 2006/03/14

• Re: [Amps] Ameritron ALS-500M, noddie, 2006/03/14
  • Re: [Amps] Ameritron ALS-500M, Joe Isabella, 2006/03/15

[Amps] Drake L7 - plate meter not working UPDATE 1, Marc Wullaert, 2006/03/14

• Re: [Amps] Drake L7 - plate meter not working UPDATE 1, Bill Turner, 2006/03/14

[Amps] Drake L7 - plate meter not working, Marc Wullaert, 2006/03/14

• Re: [Amps] Drake L7 - plate meter not working, Bill Turner, 2006/03/14

[Amps] Threads - was idiocy - perhaps it still is, Roger Parsons, 2006/03/14

• Re: [Amps] Threads - was idiocy - perhaps it still is, W0UN -- John Brosnahan, 2006/03/14
• Re: [Amps] Threads - was idiocy - perhaps it still is, HAROLD B MANDEL, 2006/03/14
  • Re: [Amps] Threads - was idiocy - perhaps it still is, Gary Smith, 2006/03/14
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Vic K2VCO, 2006/03/14
    • Re: [Amps] Threads - was idiocy - perhaps it still is, David G4FTC, 2006/03/14
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Bill Turner, 2006/03/14
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Ian White GM3SEK, 2006/03/14
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Will Matney, 2006/03/14
• Re: [Amps] Threads - was idiocy - perhaps it still is, N5bbc, 2006/03/14
• Re: [Amps] Threads - was idiocy - perhaps it still is, Peter Chadwick, 2006/03/15
  • Re: [Amps] Threads - was idiocy - perhaps it still is, Bill Turner, 2006/03/15
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Joe DiPietro, N2UF, 2006/03/15
    • Re: [Amps] Threads - was idiocy - perhaps it still is, David C. Hallam, 2006/03/15
    • [Amps] RE : Threads - was idiocy - perhaps it still is, hermans, 2006/03/15
    • Re: [Amps] RE : Threads - was idiocy - perhaps it still is, Philip Leonard WVØT, 2006/03/15
• Re: [Amps] Threads - was idiocy - perhaps it still is, Peter Chadwick, 2006/03/15
  • Re: [Amps] Threads - was idiocy - perhaps it still is, Steve Thompson, 2006/03/15
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Gary Smith, 2006/03/15
    • Re: [Amps] Threads - was idiocy - perhaps it still is, Administrator, 2006/03/15
  • Re: [Amps] Threads - was idiocy - perhaps it still is, Philip Leonard WVØT, 2006/03/15

[Amps] Scope book, Will Matney, 2006/03/13

• Re: [Amps] Scope book, Bill Turner, 2006/03/13
• Re: [Amps] Scope book, HAROLD B MANDEL, 2006/03/14
  • Re: [Amps] Scope book, Will Matney, 2006/03/14

[Amps] TSPA TSPA, John T. M. Lyles, 2006/03/13

• Re: [Amps] TSPA TSPA, Will Matney, 2006/03/13

[Amps] Proof of idiocy, wc6w@juno.com, 2006/03/12

• Re: [Amps] Proof of idiocy, Will Matney, 2006/03/12
• Re: [Amps] Proof of idiocy, Gary Smith, 2006/03/12
• Re: [Amps] Proof of idiocy, m.ford, 2006/03/12
• Re: [Amps] Proof of idiocy, HAROLD B MANDEL, 2006/03/13
  • Re: [Amps] Proof of idiocy, R, 2006/03/13
    • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
    • Re: [Amps] Proof of idiocy, Gary Smith, 2006/03/13
    • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
• Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
  • Re: [Amps] Proof of idiocy, Gary Smith, 2006/03/13
  • Re: [Amps] Proof of idiocy, Bill Turner, 2006/03/13
    • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
    • Re: [Amps] Proof of idiocy, Bill Turner, 2006/03/13
• Re: [Amps] Proof of idiocy, Rich, 2006/03/13
  • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
    • Re: [Amps] Proof of idiocy, R, 2006/03/14
  • Re: [Amps] Proof of idiocy, Al Tanner, 2006/03/13
    • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/13
    • Re: [Amps] Proof of idiocy, Jim Tonne, 2006/03/13
• Re: [Amps] Proof of idiocy, HAROLD B MANDEL, 2006/03/13
• Re: [Amps] Proof of idiocy, Peter Chadwick, 2006/03/14
• Re: [Amps] Proof of idiocy, Peter Chadwick, 2006/03/14
• Re: [Amps] Proof of idiocy, HAROLD B MANDEL, 2006/03/14
  • Re: [Amps] Proof of idiocy, Will Matney, 2006/03/14
• Re: [Amps] Proof of idiocy, HAROLD B MANDEL, 2006/03/14

[Amps] Microwave Oven Autopsy, wc6w@juno.com, 2006/03/12

• Re: [Amps] Microwave Oven Autopsy, Will Matney, 2006/03/12
• Re: [Amps] Microwave Oven Autopsy, wc6w@juno.com, 2006/03/12
  • Re: [Amps] Microwave Oven Autopsy, Will Matney, 2006/03/12
  • Re: [Amps] Microwave Oven Autopsy, Tony King - W4ZT, 2006/03/13
    • Re: [Amps] Microwave Oven Autopsy, Dan_K9ZF, 2006/03/13
    • Re: [Amps] Microwave Oven Autopsy, Tony King - W4ZT, 2006/03/13
    • Re: [Amps] Microwave Oven Autopsy, Bill Fuqua, 2006/03/13
    • Re: [Amps] Microwave Oven Autopsy, Mike, 2006/03/13
    • Re: [Amps] Microwave Oven Autopsy, Bill Turner, 2006/03/13
• Re: [Amps] Microwave Oven Autopsy, wc6w@juno.com, 2006/03/13
  • Re: [Amps] Microwave Oven Autopsy, Will Matney, 2006/03/13
• Re: [Amps] Microwave Oven Autopsy, Will Matney, 2006/03/14
  • Re: [Amps] Microwave Oven Autopsy, KD7QAE, 2006/03/15
    • Re: [Amps] Microwave Oven Autopsy, Will Matney, 2006/03/15
    • Re: [Amps] Microwave Oven Autopsy, Ian White GM3SEK, 2006/03/16
    • Re: [Amps] Microwave Oven Autopsy, Bill Turner, 2006/03/16
    • Re: [Amps] Microwave Oven Autopsy, KD7QAE, 2006/03/17
    • Re: [Amps] Microwave Oven Autopsy, Tony King - W4ZT, 2006/03/17

[Amps] Data Source for Toroids, AA6DX - Mark, 2006/03/12

• Re: [Amps] Data Source for Toroids, Bill Turner, 2006/03/12

[Amps] Need Bandswitch 3-500Z, Chris Fox NI4L, 2006/03/12

• Re: [Amps] Need Bandswitch 3-500Z, Bill Turner, 2006/03/12

[Amps] RF probe and SSB (may be a little OT), Bob, 2006/03/11

• Re: [Amps] RF probe and SSB (may be a little OT), W2RU - Bud Hippisley, 2006/03/11
  • Re: [Amps] RF probe and SSB (may be a little OT), Bob Tortajada, 2006/03/12
    • Re: [Amps] RF probe and SSB (may be a little OT), k7fm, 2006/03/12
    • Re: [Amps] RF probe and SSB (may be a little OT), Dan Sawyer, 2006/03/12
• Re: [Amps] RF probe and SSB (may be a little OT), k7fm, 2006/03/11
• Re: [Amps] RF probe and SSB (may be a little OT), Peter Chadwick, 2006/03/12

[Amps] Transformers in series, Barrie Smith, 2006/03/11

• Re: [Amps] Transformers in series, Rex Lint, 2006/03/11
  • Re: [Amps] Transformers in series, Barrie Smith, 2006/03/11
    • Re: [Amps] Transformers in series, Rex Lint, 2006/03/11
    • Re: [Amps] Transformers in series, W2RU - Bud Hippisley, 2006/03/11
    • Re: [Amps] Transformers in series, Theo Bellamy, 2006/03/12
    • Re: [Amps] Transformers in series, Bill Turner, 2006/03/12
    • Re: [Amps] Transformers in series, Theo Bellamy, 2006/03/12
    • Re: [Amps] Transformers in series, k7rdx, 2006/03/12
    • Re: [Amps] Transformers in series, Bill Turner, 2006/03/12
    • Re: [Amps] Transformers in series, Will Matney, 2006/03/12
• Re: [Amps] Transformers in series, Bill Turner, 2006/03/12
  • Re: [Amps] Transformers in series, Barrie Smith, 2006/03/12
  • Re: [Amps] Transformers in series, KD7QAE, 2006/03/12
    • Re: [Amps] Transformers in series, Bill Turner, 2006/03/12
    • Re: [Amps] Transformers in series, KD7QAE, 2006/03/12
    • Re: [Amps] Transformers in series, Will Matney, 2006/03/12
• Re: [Amps] Transformers in series, Jim Kearman, 2006/03/11
• Re: [Amps] Transformers in series, Peter Chadwick, 2006/03/12

[Amps] AL-1200/AL-1500, Scott Manthe, 2006/03/11

• Re: [Amps] AL-1200/AL-1500, John- W4DJ, 2006/03/13
  • [Amps] Amp Supl. Co. LK500, Stein Roar Brobakken & LA6FJA/KI4KJP, 2006/03/13

[Amps] Band switching, hermans, 2006/03/11

• Re: [Amps] Band switching, PA3DUV, 2006/03/11
• Re: [Amps] Band switching, Peter Chadwick, 2006/03/12

[Amps] SB220 refurb TSPA, John T. M. Lyles, 2006/03/10

• Re: [Amps] SB220 refurb TSPA, Bill Turner, 2006/03/10

[Amps] SB-220 Unmodification, johna8119-amps, 2006/03/10

• Re: [Amps] SB-220 Unmodification, Gary Smith, 2006/03/10
  • Re: [Amps] SB-220 Unmodification, carl s., 2006/03/10

[Amps] Observations on a Pi-L tank, Scott Townley, 2006/03/10

• Re: [Amps] Observations on a Pi-L tank, Bill Turner, 2006/03/10
• Re: [Amps] Observations on a Pi-L tank, Will Matney, 2006/03/10
• Re: [Amps] Observations on a Pi-L tank, R, 2006/03/11

[Amps] Oscilloscopes, David C. Hallam, 2006/03/10

• Re: [Amps] Oscilloscopes, wc6w@juno.com, 2006/03/10
  • Re: [Amps] Oscilloscopes, Edgar Brown, N6OU, 2006/03/10
    • Re: [Amps] Oscilloscopes, Will Matney, 2006/03/11
    • Re: [Amps] Oscilloscopes, Bill Turner, 2006/03/11
    • Re: [Amps] Oscilloscopes, Will Matney, 2006/03/11
    • Re: [Amps] Oscilloscopes, David C. Hallam, 2006/03/11

[Amps] Trouble in pileups?, Steve Thompson, 2006/03/10

• Re: [Amps] Trouble in pileups?, Mark Hill, 2006/03/10
  • Re: [Amps] Trouble in pileups?, Steve Thompson, 2006/03/10
    • Re: [Amps] Trouble in pileups?, Mark Hill, 2006/03/10

[Amps] Parasitic Suppressor 4-1000A, aborg, 2006/03/09

• Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/09
• Re: [Amps] Parasitic Suppressor 4-1000A, Saandy, 2006/03/10
  • Re: [Amps] Parasitic Suppressor 4-1000A, Steve Thompson, 2006/03/10
    • Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/10
    • Re: [Amps] Parasitic Suppressor 4-1000A, Steve Thompson, 2006/03/10
    • Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/10
    • Re: [Amps] Parasitic Suppressor 4-1000A, Steve Thompson, 2006/03/10
    • Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/11
    • Re: [Amps] Parasitic Suppressor 4-1000A, Saandy, 2006/03/10
• Re: [Amps] Parasitic Suppressor 4-1000A, Peter Chadwick, 2006/03/11
  • Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/11
    • Re: [Amps] Parasitic Suppressor 4-1000A, Steve Thompson, 2006/03/13
    • Re: [Amps] Parasitic Suppressor 4-1000A, R, 2006/03/13
    • Re: [Amps] Parasitic Suppressor 4-1000A, Steve Thompson, 2006/03/13

[Amps] Panasonic "inverter" Switching HV power supply, Bill Fuqua, 2006/03/09

• Re: [Amps] Panasonic "inverter" Switching HV power supply, TexasRF, 2006/03/09

Re: [Amps] off topic -- books recommended, ADRIAN REES, 2006/03/09

• Re: [Amps] off topic -- books recommended, Jim Brown, 2006/03/09

[Amps] wide band amplifier ??, Dan Sawyer, 2006/03/08

• Re: [Amps] wide band amplifier ??, Dan Sawyer, 2006/03/09

[Amps] Drake L-7, sb200, 2006/03/08

• Re: [Amps] Drake L-7, Mark, 2006/03/08
  • Re: [Amps] Drake L-7, Tony King - W4ZT, 2006/03/09
• Re: [Amps] Drake L-7, Dave Burr, 2006/03/08
• Re: [Amps] Drake L-7, Bob Green, 2006/03/08
  • [Amps] Heath SB-200 vs SB-201, Bob Green, 2006/03/14
    • Re: [Amps] Heath SB-200 vs SB-201, Rocky Clayton, 2006/03/14

Re: [Amps] Bird accuracy, etc., Roy Koeppe, 2006/03/08

• Re: [Amps] Bird accuracy, etc., Peter Chadwick, 2006/03/08
  • Re: [Amps] Bird accuracy, etc., Will Matney, 2006/03/08
• Re: [Amps] Bird accuracy, etc., Roy Koeppe, 2006/03/08

[Amps] ripple in HV ps, Partain, Chuck, 2006/03/08

• Re: [Amps] ripple in HV ps, R, 2006/03/08
• Re: [Amps] ripple in HV ps, HAROLD B MANDEL, 2006/03/08

[Amps] mdc hv capacitors indentifcation, Partain, Chuck, 2006/03/08

• Re: [Amps] mdc hv capacitors indentifcation, Peter Chadwick, 2006/03/08
  • Re: [Amps] mdc hv capacitors indentifcation, R, 2006/03/08

[Amps] Pin Diodes, Rob & Terri Sherwood, 2006/03/08

• Re: [Amps] Pin Diodes, Paul Christensen, 2006/03/08
  • Message not available
    • Re: [Amps] Pin Diodes, Paul Christensen, 2006/03/08
    • Re: [Amps] Pin Diodes, R, 2006/03/08
    • Re: [Amps] Pin Diodes, Ian White GM3SEK, 2006/03/08
    • Re: [Amps] Pin Diodes, R, 2006/03/08
    • Re: [Amps] Pin Diodes, Ian White GM3SEK, 2006/03/08
  • Re: [Amps] Pin Diodes, W0UN -- John Brosnahan, 2006/03/08
    • Re: [Amps] Pin Diodes, Paul Christensen, 2006/03/08
    • Re: [Amps] Pin Diodes, W0UN -- John Brosnahan, 2006/03/08
    • Re: [Amps] Pin Diodes, Joe Subich, W4TV, 2006/03/08
    • Re: [Amps] Pin Diodes, Jim Brown, 2006/03/08
    • Re: [Amps] Pin Diodes, Ian White GM3SEK, 2006/03/08
    • Re: [Amps] Pin Diodes, Joe Subich, W4TV, 2006/03/08
• Re: [Amps] Pin Diodes, W0UN -- John Brosnahan, 2006/03/08
  • Re: [Amps] Pin Diodes, Vic K2VCO, 2006/03/08
• Re: [Amps] Pin Diodes, R, 2006/03/08
• Re: [Amps] Pin Diodes, Peter Chadwick, 2006/03/09
  • Re: [Amps] Pin Diodes, Paul Christensen, 2006/03/09
• Re: [Amps] Pin Diodes, Bill Tippett, 2006/03/09
• Re: [Amps] Pin Diodes, Peter Chadwick, 2006/03/10

[Amps] confused reading amidon ferrite specs?, Dan Sawyer, 2006/03/07

• Re: [Amps] confused reading amidon ferrite specs?, Will Matney, 2006/03/07
  • Re: [Amps] confused reading amidon ferrite specs?, R, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, Jim Brown, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, R, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, Dan Sawyer, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, Will Matney, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, Will Matney, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, Steve Thompson, 2006/03/08
    • Re: [Amps] confused reading amidon ferrite specs?, R, 2006/03/08
    • Re: [Amps] confused reading amidon ferrite specs?, Will Matney, 2006/03/07
    • Re: [Amps] confused reading amidon ferrite specs?, R, 2006/03/07
• Re: [Amps] confused reading amidon ferrite specs?, Jim Brown, 2006/03/07
  • [Amps] off topic -- books recommended, Chris Howard, 2006/03/09
• Re: [Amps] confused reading amidon ferrite specs?, R, 2006/03/07

[Amps] bird watts, HAROLD B MANDEL, 2006/03/07

• Re: [Amps] bird watts, Gudguyham, 2006/03/07
  • Re: [Amps] bird watts, Dr. David Kirkby, 2006/03/07

[Amps] A $500 amp!, Will Matney, 2006/03/06

• Re: [Amps] A $500 amp!, Theo Bellamy, 2006/03/06
  • Re: [Amps] A $500 amp!, noddie, 2006/03/07
  • Re: [Amps] A $500 amp!, Gary Smith, 2006/03/07
• Re: [Amps] A $500 amp!, Bill Turner, 2006/03/08
• Re: [Amps] A $500 amp!, Jim Kearman, 2006/03/07
• Re: [Amps] A $500 amp!, Will Matney, 2006/03/07
  • Re: [Amps] A $500 amp!, Gary Smith, 2006/03/07

[Amps] Dentron Clipperton QRO, John Strunck, 2006/03/06

• Re: [Amps] Dentron Clipperton QRO, Will Matney, 2006/03/06

[Amps] whats a good 3-500z tube now, kf4toh, 2006/03/06

• Re: [Amps] whats a good 3-500z tube now, Kevin Adam N9IWW, 2006/03/06
• Re: [Amps] whats a good 3-500z tube now, kf4toh, 2006/03/06

[Amps] amps < etc :, carl s., 2006/03/06

• Re: [Amps] amps < etc :, Jim Kearman, 2006/03/06

[Amps] PIN diodes TSPA, John T. M. Lyles, 2006/03/06

• Re: [Amps] PIN diodes TSPA, carl s., 2006/03/06
  • [Amps] RE : PIN diodes TSPA, hermans, 2006/03/07

[Amps] Applying power after many years - advice?, tf3kx, 2006/03/06

• Re: [Amps] Applying power after many years - advice?, carl s., 2006/03/06

[Amps] Speaking of PIN T/R switches, Jim Kearman, 2006/03/06

• Re: [Amps] Speaking of PIN T/R switches, Dr. David Kirkby, 2006/03/06
• Re: [Amps] Speaking of PIN T/R switches, Dan Hearn, 2006/03/06
  • Re: [Amps] Speaking of PIN T/R switches, Dan Hearn, 2006/03/06
• Re: [Amps] Speaking of PIN T/R switches, Peter Chadwick, 2006/03/07

[Amps] cleaning contacts and pots?, Dan Sawyer, 2006/03/06

• Re: [Amps] cleaning contacts and pots?, Will Matney, 2006/03/06
• Re: [Amps] cleaning contacts and pots?, Gary Smith, 2006/03/06
• Re: [Amps] cleaning contacts and pots?, Ken KW0A, 2006/03/06
• Re: [Amps] cleaning contacts and pots?, HAROLD B MANDEL, 2006/03/06

[Amps] For cats sake!, Barrie Smith, 2006/03/05

• Re: [Amps] For cats sake!, k7fm, 2006/03/05
  • Re: [Amps] For cats sake!, Will Matney, 2006/03/05
  • Re: [Amps] For cats sake!, Barrie Smith, 2006/03/05
• Re: [Amps] For cats sake!, Bill Turner, 2006/03/05
  • Re: [Amps] For cats sake!, Will Matney, 2006/03/05
    • Re: [Amps] For cats sake!, Bill Turner, 2006/03/05
    • Re: [Amps] For cats sake!, Will Matney, 2006/03/05
    • Re: [Amps] For cats sake!, Bill Turner, 2006/03/05
    • Re: [Amps] For cats sake!, Will Matney, 2006/03/06
    • Re: [Amps] For cats sake!, R, 2006/03/06
    • Re: [Amps] For cats sake!, Will Matney, 2006/03/06
• Re: [Amps] For cats sake!, wc6w@juno.com, 2006/03/06

[Amps] 813 hb, hcawthra, 2006/03/05

• Re: [Amps] 813 HB, David C.Hallam, 2006/03/05
  • Re: [Amps] 813 HB, m.ford, 2006/03/05

[Amps] bringing up my gu-84b amp, ka1mwp, 2006/03/05

• Re: [Amps] bringing up my gu-84b amp, Bill Turner, 2006/03/05

[Amps] SELL: Wide Spaced Air Variable Capacitors, w2cqm, 2006/03/05

• Re: [Amps] SELL: Wide Spaced Air Variable Capacitors, kb4i, 2006/03/06

[Amps] What's a better rheostat placement ?, w2cqm, 2006/03/05

• Re: [Amps] What's a better rheostat placement ?, Tony King - W4ZT, 2006/03/05
• Re: [Amps] What's a better rheostat placement ?, Bill Turner, 2006/03/05
• Re: [Amps] What's a better rheostat placement ?, HAROLD B MANDEL, 2006/03/05

[Amps] Centralab JVN-10, Mike, 2006/03/04

• Re: [Amps] Centralab JVN-10, Dan Hearn, 2006/03/05
  • Re: [Amps] Centralab JVN-10, Scott Townley, 2006/03/05

Re: [Amps] A request from Portugal (Was: RE: testing 572 B tubes), Karl-Arne Markström, 2006/03/04

• Re: [Amps] A request from Portugal (Was: RE: testing 572 B tubes), Ian White GM3SEK, 2006/03/04
  • Re: [Amps] A request from Portugal (Was: RE: testing 572 B tubes), Bill Turner, 2006/03/04

[Amps] simple balun (101) questions, Dan Sawyer, 2006/03/04

• Re: [Amps] simple balun (101) questions, Will Matney, 2006/03/05

[Amps] testing 572 B tubes, alan.kaul@att.net, 2006/03/04

• Re: [Amps] testing 572 B tubes, Karl-Arne Markström, 2006/03/04
  • Re: [Amps] testing 572 B tubes, Mike, 2006/03/04
  • Re: [Amps] testing 572 B tubes, Joe DiPietro, N2UF, 2006/03/04
• Re: [Amps] testing 572 B tubes, Phil Clements, 2006/03/04
• Re: [Amps] testing 572 B tubes, Peter Chadwick, 2006/03/04
  • Re: [Amps] testing 572 B tubes, R, 2006/03/04
• Re: [Amps] testing 572 B tubes, alan.kaul@att.net, 2006/03/04
  • Re: [Amps] testing 572 B tubes, noddie, 2006/03/04
    • Re: [Amps] testing 572 B tubes, Phil Clements, 2006/03/04
• Re: [Amps] testing 572 B tubes, Joe DiPietro, N2UF, 2006/03/04
• Re: [Amps] testing 572 B tubes, Peter Chadwick, 2006/03/05

[Amps] right angle drive sought, gdaught6, 2006/03/03

• Re: [Amps] right angle drive sought, R, 2006/03/03

[Amps] SB-220 Shorted HV Transformer, RDavis, 2006/03/03

• Re: [Amps] SB-220 Shorted HV Transformer, Philip Leonard WVØT, 2006/03/15
  • Re: [Amps] SB-220 Shorted HV Transformer, Dave Burr, 2006/03/15
  • [Amps] Washing Equipment (was SB-220 Shorted HV Transformer), Dino Darling, 2006/03/15
• Re: [Amps] SB-220 Shorted HV Transformer, Jim Kearman, 2006/03/15

Re: [Amps] 813 Amps, john . brewer, 2006/03/03

• Re: [Amps] 813 Amps, bob finger, 2006/03/03

[Amps] Var. Cap. Identify, Mike, 2006/03/02

• Re: [Amps] Var. Cap. Identify, Phil Clements, 2006/03/03
• Re: [Amps] Var. Cap. Identify, Edgar Brown, N6OU, 2006/03/03
• Re: [Amps] Var. Cap. Identify, HOWARDLYON, 2006/03/03

[Amps] HB amps, carl s., 2006/03/02

• Re: [Amps] HB amps, k7fm, 2006/03/02
  • Re: [Amps] HB amps, Chris Howard, 2006/03/02
• Re: [Amps] HB amps, Bill Turner, 2006/03/03
  • Re: [Amps] HB amps, Ian White GM3SEK, 2006/03/03
    • Re: [Amps] HB amps, Gary Schafer, 2006/03/03
    • Re: [Amps] HB amps, Ian White GM3SEK, 2006/03/03
    • Re: [Amps] HB amps, Gary Schafer, 2006/03/03
    • Re: [Amps] HB amps, Ed Swynar, 2006/03/05
    • Re: [Amps] HB amps, W.F van Wyk, 2006/03/05
    • Re: [Amps] HB amps, Mike Bondarev, 2006/03/03
    • Re: [Amps] HB amps, Will Matney, 2006/03/03
    • Re: [Amps] HB amps, Gary Schafer, 2006/03/03
• Re: [Amps] HB amps, Mike Bondarev, 2006/03/05
• Re: [Amps] HB Amps, john . brewer, 2006/03/03
  • Re: [Amps] HB Amps, Chris Howard, 2006/03/03
    • Re: [Amps] HB Amps, Tony King - W4ZT, 2006/03/03
    • [Amps] Looking for 813 amp parts, was: HB Amps, Larry Keith, 2006/03/03
    • Re: [Amps] HB Amps, Larry Carman, 2006/03/03
    • Re: [Amps] HB Amps, R, 2006/03/03
    • Re: [Amps] HB Amps, Bill Turner, 2006/03/04
  • Re: [Amps] HB Amps, Bill Turner, 2006/03/04
    • Re: [Amps] HB Amps, k7rdx, 2006/03/04
    • Re: [Amps] HB Amps, Bill Turner, 2006/03/04
    • Re: [Amps] HB Amps, john . brewer, 2006/03/06
    • Re: [Amps] HB Amps, Bill Turner, 2006/03/06
    • Re: [Amps] HB Amps, Will Matney, 2006/03/06
    • Re: [Amps] HB Amps, Bill Turner, 2006/03/06
    • Re: [Amps] HB Amps, Alek Petkovic, 2006/03/06
    • Re: [Amps] HB Amps, Will Matney, 2006/03/06
• Re: [Amps] HB amps, Bill L. Fuqua, 2006/03/03
• Re: [Amps] HB amps, Peter Chadwick, 2006/03/04
• Re: [Amps] HB Amps, Gudguyham, 2006/03/06
  • Re: [Amps] HB Amps, Tony King - W4ZT, 2006/03/06
  • Re: [Amps] HB Amps, Bill Turner, 2006/03/06
• Re: [Amps] HB Amps, ad5gb, 2006/03/06
  • Re: [Amps] HB Amps, Bill Turner, 2006/03/06
• Re: [Amps] HB Amps, sccook1, 2006/03/06
• Re: [Amps] HB Amps, Steve Katz, 2006/03/06
  • Re: [Amps] HB Amps, Steven Cook, 2006/03/06
  • Re: [Amps] HB Amps, Philip Leonard WVØT, 2006/03/10

[Amps] Alpha 78 voltage sag, Martin Sole, 2006/03/02

• Re: [Amps] Alpha 78 voltage sag, KD7QAE, 2006/03/05
  • Re: [Amps] Alpha 78 voltage sag, Will Matney, 2006/03/05
  • Re: [Amps] Alpha 78 voltage sag, Martin Sole, 2006/03/05
    • Re: [Amps] Alpha 78 voltage sag, Will Matney, 2006/03/05
• Re: [Amps] Alpha 78 voltage sag, TexasRF, 2006/03/02
• Re: [Amps] Alpha 78 voltage sag, HAROLD B MANDEL, 2006/03/02
  • Re: [Amps] Alpha 78 voltage sag, Will Matney, 2006/03/02

[Amps] oil, Gene Bigham, 2006/03/01

• Re: [Amps] oil, Gary Smith, 2006/03/02

Re: [Amps] Panel lettering, scales, dials, etc, Alan Ibbetson, 2006/03/01

• Re: [Amps] Panel lettering, scales, dials, etc, Will Matney, 2006/03/01
  • Re: [Amps] Panel lettering, scales, dials, etc, Will Matney, 2006/03/01
    • Re: [Amps] Panel lettering, scales, dials, etc, Mike Sawyer, 2006/03/01
    • Re: [Amps] Panel lettering, scales, dials, etc, Will Matney, 2006/03/01
• Re: [Amps] Panel lettering, scales, dials, etc, HAROLD B MANDEL, 2006/03/02
• Re: [Amps] Panel lettering, scales, dials, etc, Kenneth D. Grimm, K4XL, 2006/03/02

[Amps] International Radio Service Division, FoxRun, 2006/03/01

• Re: [Amps] International Radio Service Division, Floyd Sense, 2006/03/01
• Re: [Amps] International Radio Service Division, Jim Brown, 2006/03/06
• Re: [Amps] International Radio Service Division, HAROLD B MANDEL, 2006/03/01

[Amps] GE, Will Matney, 2006/03/01

• Message not available
  • Re: [Amps] GE, Will Matney, 2006/03/01

Re: [Amps] capacitor oils TSPA, Bill Turner, 2006/03/01

• Re: [Amps] capacitor oils TSPA, k7fm, 2006/03/01
  • Re: [Amps] capacitor oils TSPA, Bill Turner, 2006/03/01