Amps
[Top] [All Lists]

Re: [Amps] RE : MW Oven Transformer question

To: "Larry Carman" <lncarman@swbell.net>, <amps@contesting.com>
Subject: Re: [Amps] RE : MW Oven Transformer question
From: Bill Turner <dezrat@copper.net>
Date: Wed, 22 Mar 2006 08:50:04 -0800
List-post: <mailto:amps@contesting.com>
ORIGINAL MESSAGE:

At 04:35 AM 3/22/2006, Larry Carman wrote:

>Not to drift off the subject too much, but I've heard that some hams many
>years ago would drop there amp's HV transformers in a bucket of oil and run
>the heck out of them, much over there rated current. Anyone out there ever
>done that?

*********** REPLY SEPARATOR ***********

I'm sure this will increase the transformer's power rating some, but 
the problem is the oil can only remove heat from the outside of the 
unit, not from deep inside. That's where overheating would occur 
first. Heat transfer from the inside to the outside is slow and a 
surge might do you in. Also, the oil itself would have to be cooled 
if you're going to operate for any length of time.

Better to just get a bigger transformer.

Bill, W6WRT

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>