Re: [Amps] Gonset GSB-201 Mods

["Jim Tonne" <tonne@comcast.net>]

If that 50k resistor is the bleeder on the power supply,
* leave it alone *  !!!   

>  I had been thinking that changing the HV supply from 
> choke input to capacitor input would boost the HV up 
> to 2100 V and eliminate the need for the 50k 100W 
> load resistor (it adds 45W of extra heat).

- Jim WB6BLD


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps