That or a choke with enough inductive reactance to drop the voltage as that's
all a variac is. Put it in the primary side and figure for the current drawn
through it to size it.
Best,
Will
*********** REPLY SEPARATOR ***********
On 3/5/06 at 4:42 PM Bill Turner wrote:
>ORIGINAL MESSAGE:
>
>At 04:25 PM 3/5/2006, Barrie Smith wrote:
>>I could include a variac, which I have, although I hear various
>>reports on this reflector that variacs are bad.
>
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>I guess I'm a little dense today, but it took me a while to figure
>out what your question was.
>
>Apparently it's "how do I reduce the voltage if I use the Peter Dahl
>transformer".
>
>If that's it, use the variac. That's what they are for.
>
>Bill, W6WRT
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|