Steve,
Thanks for the gen. That's one of my 16A mains breakers allocated then!
(Of course, I wouldn't even contemplate using such a valve as it's
heater power exceeds the UK, +26 dBW power limit, whereas my 3CX3000
is under by a full 10W!)
Regards.
Mark.
-----------------------------------------
At 11:14 10/03/2006, you wrote:
>Mark Hill wrote:
>>Steve,
>>Nice idea - must look up what electric is required to light up the heater!
>
>It's a bright emitter - 15V/165A
>
>Steve
*******************************************
Mark Hill - G4FPH
E-mail: g4fph@mjha.co.uk
Current web pages at: www.g4fph.net
Old web pages at: www.qsl.net/g4fph
----------------------------------------------------------------------
Dipoles resonant on 1942 / 3720 / 7085 kHz
Three element wire beam coming soon on 14180 kHz!
----------------------------------------------------------------------
Remember - SIDE for HV safety:
S witch off
I solate
D ump
E arth
*******************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|