This is probably obvious to everyone, but just in case, keep in mind
that all controls, switches, connectors, pilot lamps, etc. that are
externally accessible on an amplifier or power supply built in a wooden
box must be effectively grounded to a common ground bus connected to the
AC line safety ground. That way, any insulation failures (etc.) will
result in blown fuses rather than death.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|