Amps
[Top] [All Lists]

Re: [Amps] "I gotta tell this"

To: "k7fm" <k7fm@teleport.com>, <g3rzp@g3rzp.wanadoo.co.uk>,<dezrat@copper.net>, "carl s." <carlseye@tampabay.rr.com>,"N7HIY" <N7HIY@comcast.net>, <jkearman@att.net>,<amps@contesting.com>
Subject: Re: [Amps] "I gotta tell this"
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Date: Thu, 30 Mar 2006 09:21:05 -0800
List-post: <mailto:amps@contesting.com>
Aw... C'mon Collin, we would like to hear THAT story.
73,
Gary...wa6fgi


----- Original Message ----- 
From: "k7fm" <k7fm@teleport.com>
To: <g3rzp@g3rzp.wanadoo.co.uk>; <dezrat@copper.net>; "carl s." 
<carlseye@tampabay.rr.com>; "N7HIY" <N7HIY@comcast.net>; <jkearman@att.net>; 
<amps@contesting.com>
Sent: Thursday, March 30, 2006 6:03 AM
Subject: Re: [Amps] "I gotta tell this"


> >If one calls 10 times in a pile up to work the DX with 100 watts, and 
> >once
>>with a kW
>
> Since I like 75 meters dx, I operate mostly in the winter.  In that case,
> the waste heat generated simply supplies heat to the occupied room.  If I
> was operating qrp, I would need supplemental heat.  The more inefficient 
> the
> amplifier is, the more heat that is supplied to the room and the less the
> normal heat is required.
>
> Have you ever seen a cat want to curl up on top of a qrp rig?  Cats love
> vacuum tubes.  They especially love DX-100s and SX-101s.  I have seen one
> high power amplifier that would lift the cat off the cabinet when it was
> fired up, but that is another story.
>
> 73,  Colin  K7FM
>
> Note to Peter:  You fit right at the top of the rationalization expert
> chart.  Right up there with Picasso, who told his mistress he left the 
> dust
> on his paintings to protect them from ultraviolet rays. Good work.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>