Scott Townley wrote:
> Measured with a simple B&K capacitance meter (1kHz):
> 3-500Z grid to plate 5.0pF
> 3-500Z inserted into Johnson ceramic socket, recessed about 3/4" below
> aluminum chassis deck: 10pF
> Seem right? Kinda surprised that an extra 5pF just from sticking it in the
> socket...socket grid pins (all 3) are directly grounded to chassis.
Sure. The chassis has plenty of area, and the plate's not that far from it.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|