Bill wrote:
>Using four transformers like this is not good design practice unless
>you know for sure the insulation between windings and core will
>handle the increased voltage on the two "outer" transformers. With TV
>transformers like this example, one can only guess.
Very true .... unless you are working with a $35 dollar budget like I was
at the time. Then you use what you got and run what you brung. If the smoke
comes out of it you bum bigger parts next time.
;-)
Theo K4MO
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|