TenTec Mailing List (date)

TenTec Mailing List (date)

[Thread Index] [Top] [All Lists]

November 30, 2010

Re: [TenTec] OT: Indoor antenna "Overcoming Antenna Restrictions", Don Jones, 23:58
Re: [TenTec] Easy Sticky PTO solution, again, Bill Harris, 23:24
Re: [TenTec] PTO Rebuild or not?, Bwana Bob, 22:41
Re: [TenTec] OT: Indoor Antenna, Bwana Bob, 22:31
Re: [TenTec] PTO Rebuild or not?, Bwana Bob, 22:13
Re: [TenTec] Stealth Antennas and restricted QTHs, Bwana Bob, 22:03
Re: [TenTec] OT: Indoor Antenna, JOSEPH DAVIS, 21:14
Re: [TenTec] OT: Indoor antenna, Clayton Brantley, 21:03
Re: [TenTec] OT: Indoor antenna, Jim Lowman, 20:23
Re: [TenTec] OT: Indoor antenna, Jim Lowman, 20:10
Re: [TenTec] omni 6+/ power issue, Stuart Rohre, 19:29
Re: [TenTec] OT: Indoor Antenna, Rsoifer, 19:07
Re: [TenTec] OT indoor antenna, Ed Malmgren, 19:06
Re: [TenTec] OT indoor antenna, Rsoifer, 19:04
Re: [TenTec] OT: Indoor Antenna, Pumbaa, 19:02
Re: [TenTec] OT indoor antenna, Rob Atkinson, 18:54
[TenTec] Easy Sticky PTO solution, again, dbp tds.net, 18:35
Re: [TenTec] Omni VI+ sustainability, Richards, 17:34
Re: [TenTec] Omni VI+ sustainability, Richards, 17:29
Re: [TenTec] OT: Indoor antenna "Overcoming Antenna Restrictions", Rick - NJ0IP / DJ0IP, 17:09
[TenTec] Omni VI+ sustainability, Don Rasmussen, 16:52
[TenTec] FS: Corsair II PTO, Don Rasmussen, 16:42
Re: [TenTec] OT: Indoor Antenna, Paul Gentry, 16:39
Re: [TenTec] Omni VI+ sustainability, Art Trampler, 15:46
Re: [TenTec] OT: Indoor antenna "Overcoming Antenna Restrictions", Don Jones, 15:42
[TenTec] Corsair II with optical encoder, Lawrence Matheson, 15:41
[TenTec] PTO - solid state tuning video., Don Rasmussen, 15:23
[TenTec] Omni VI+ sustainability, Speer, Doug, 15:21
Re: [TenTec] OT: Indoor Antenna, Richards, 14:45
Re: [TenTec] PTO Rebuild or not?, Dr. Gerald N. Johnson, 14:37
[TenTec] PTO Rebuild or not?, Don Rasmussen, 14:11
Re: [TenTec] OT: Indoor Antenna, Clayton Brantley, 13:43
Re: [TenTec] PTO Rebuild or not?, Andrew Moore, 12:44
Re: [TenTec] PTO Rebuild or not?, Dr. Gerald N. Johnson, 12:38
Re: [TenTec] PTO Rebuild or not?, Ed - K9EW, 12:31
Re: [TenTec] OT: Indoor antenna, Ray Sills, 12:29
Re: [TenTec] OT: Indoor antenna, Rick - NJ0IP / DJ0IP, 11:56
Re: [TenTec] OT: Indoor antenna, Ron Notarius W3WN, 11:26
Re: [TenTec] OT: Indoor antenna "Overcoming Antenna Restructions", kf6e, 11:11
Re: [TenTec] OT: Indoor antenna, kf6e, 11:07
Re: [TenTec] OT: Indoor Antenna, kf6e, 11:04
Re: [TenTec] OT: Indoor antenna, kf6e, 10:57
Re: [TenTec] OT: Indoor antenna, kf6e, 10:40
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 10:32
Re: [TenTec] PTO Rebuild or not?, d . e . warnick, 10:25
[TenTec] PTO Rebuild or not?, Curt, 10:14
Re: [TenTec] omni 6+/ power issue, Clayton Brantley, 09:23
Re: [TenTec] OT: Indoor antenna, d . e . warnick, 07:17
Re: [TenTec] OT: Indoor antenna, Dr. Gerald N. Johnson, 04:12
[TenTec] OT:Indoor Antennas, Jliving39, 04:05
Re: [TenTec] OT: Indoor antenna, Richards, 01:19
Re: [TenTec] omni 6+/ power issue, Dr. Gerald N. Johnson, 00:30

November 29, 2010

Re: [TenTec] Stealth Antennas and restricted QTHs, Charles P. Steinmetz, 22:32
Re: [TenTec] omni 6+/ power issue, W8BVH, 22:25
Re: [TenTec] Stealth Antennas and restricted QTHs, Bwana Bob, 22:20
Re: [TenTec] Stealth Antennas and restricted QTHs, Ray Sills, 21:17
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 20:59
Re: [TenTec] Stealth Antennas and restricted QTHs, Ron Notarius W3WN, 20:52
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 20:46
Re: [TenTec] [Orion] Fwd: Update on Orion Firmware/software, Bernie Skoch, 20:38
Re: [TenTec] Stealth Antennas and restricted QTHs, Clayton Brantley, 20:32
[TenTec] Fwd: Update on Orion Firmware/software, Eric Rosenberg, 20:28
Re: [TenTec] OT: Indoor Antenna, Richards, 20:16
Re: [TenTec] omni 6+/ power issue, Stuart Rohre, 20:14
Re: [TenTec] omni 6+/ power issue, Clayton Brantley, 20:11
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 19:49
Re: [TenTec] Stealth Antennas and restricted QTHs, Rick - NJ0IP / DJ0IP, 19:47
Re: [TenTec] omni 6+/ power issue, Stuart Rohre, 19:13
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 19:09
Re: [TenTec] OT: Indoor Antenna, Rick - NJ0IP / DJ0IP, 19:01
[TenTec] Stealth Antennas and restricted QTHs, Ray Sills, 18:56
Re: [TenTec] OT: Indoor antenna, Jim Lowman, 18:50
Re: [TenTec] OT: Indoor antenna "Overcoming Antenna Restructions", Kris Merschrod, 18:50
[TenTec] 1553 Keyer, John Graves, 18:44
Re: [TenTec] OT: Indoor antenna, Ron Notarius W3WN, 18:24
Re: [TenTec] OT: Indoor Antenna, Bill Rowlett, 18:08
Re: [TenTec] omni 6+/ power issue, CSM(r) Gary Huber, 17:40
Re: [TenTec] Attic antennas, kf6e, 16:15
Re: [TenTec] OT: Indoor Antenna, Clayton Brantley, 16:09
Re: [TenTec] OT: Indoor antenna, Rick - NJ0IP / DJ0IP, 16:04
Re: [TenTec] Attic antennas, Rsoifer, 15:55
Re: [TenTec] omni 6+/ power issue, mike bryce, 15:48
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 15:45
Re: [TenTec] OT: Indoor antenna, Dr. Gerald N. Johnson, 15:01
Re: [TenTec] OT: Indoor antenna, Rob Atkinson, 14:54
Re: [TenTec] Attic antennas, John T. Fleming, 14:34
[TenTec] Corsair II - solid state PTO, Don Rasmussen, 13:46
Re: [TenTec] OT: Indoor antenna, Rsoifer, 13:05
Re: [TenTec] OT: Indoor Antenna, John Graves, 12:45
[TenTec] OT: Indoor Antenna, Jliving39, 12:42
Re: [TenTec] OT: Indoor Antenna, Rick - NJ0IP / DJ0IP, 12:37
Re: [TenTec] OT: Indoor antenna, Steve Hunt, 12:34
Re: [TenTec] OT: Indoor antenna, Dr. Gerald N. Johnson, 12:28
Re: [TenTec] OT: Indoor antenna, N2FQ, 11:53
Re: [TenTec] OT: Indoor Antenna, Rsoifer, 11:09
Re: [TenTec] OT: Indoor Antenna, kf6e, 10:17
[TenTec] OT: Indoor Antenna, Jliving39, 10:00
Re: [TenTec] OT: Indoor antenna, kf6e, 09:18
Re: [TenTec] OT: Indoor antenna, Mike Hyder -N4NT-, 09:03
Re: [TenTec] OT: Indoor antenna, kf6e, 08:30
Re: [TenTec] Attic antennas, kf6e, 08:21
Re: [TenTec] (no subject), kf6e, 08:07

November 28, 2010

[TenTec] FOR SALE: Corsair 560 and Power Supply 260, Jliving39, 18:27
Re: [TenTec] WTB: Case for a Transmatch, Ron Notarius W3WN, 10:18
Re: [TenTec] WTB: Case for a Transmatch, steve jobes, 09:44
[TenTec] For Sale: Corsair 560 and Power Supply 260, Jliving39, 08:12

November 27, 2010

Re: [TenTec] Looking for paragon Ii, mike bryce, 23:16
Re: [TenTec] Looking for paragon Ii, mike bryce, 23:10
Re: [TenTec] WTB: Case for a Transmatch, Dr. Gerald N. Johnson, 21:46
Re: [TenTec] WTB: Case for a Transmatch, Ken Brown, 21:29
[TenTec] WTB: Case for a Transmatch, Ron Notarius W3WN, 21:12
Re: [TenTec] Looking for paragon Ii, Joel R. Hallas, 21:06
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Wayne Dial, 20:51
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 20:36
[TenTec] Ten Tec Tailgate weekend, W8BVH, 20:28
Re: [TenTec] omni 6+/ power issue, CSM(r) Gary Huber, 20:02
[TenTec] Looking for paragon Ii, Mike Bryce, 19:53
Re: [TenTec] omni 6+/ power issue, Phil Chambley Sr., 19:39
Re: [TenTec] omni 6+/ power issue, Dr. Gerald N. Johnson, 19:22
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Dr. Gerald N. Johnson, 19:22
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Dr. Gerald N. Johnson, 19:22
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Dr. Gerald N. Johnson, 19:22
Re: [TenTec] omni 6+/ power issue, CSM(r) Gary Huber, 18:28
Re: [TenTec] omni 6+/ power issue, Phil Chambley Sr., 17:53
Re: [TenTec] omni 6+/ power issue, Ken Brown, 17:36
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Wayne Dial, 17:13
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Phil Chambley Sr., 16:59
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 16:39
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 16:38
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Wayne Dial, 16:37
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Wayne Dial, 16:32
Re: [TenTec] omni 6+/ power issue, mike bryce, 16:27
Re: [TenTec] omni 6+/ power issue, Phil Chambley Sr., 16:07
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Phil Chambley Sr., 16:02
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 16:01
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Ken Brown, 15:20
Re: [TenTec] omni 6+/ power issue, Phil Chambley Sr., 14:34
Re: [TenTec] omni 6+/ power issue, Wayne Dial, 14:16
Re: [TenTec] omni 6+/ power issue, CSM(r) Gary Huber, 13:14
Re: [TenTec] Omni 6+ - no output on 12M/10M, N4PY2, 12:35
Re: [TenTec] Omni 6+ - no output on 12M/10M and omni 6+/ power issue, Dr. Gerald N. Johnson, 12:26
[TenTec] Omni 6+ - no output on 12M/10M, Barry N1EU, 11:59
[TenTec] omni 6+/ power issue, Wayne Dial, 11:28
[TenTec] Desk Microphones, Power Supplies, and HF Rig FS, Ken Simpson, W8EK, 09:16
[TenTec] ten Tec power 210 /210A supply, Norm Burnett, 08:16

November 26, 2010

Re: [TenTec] PTO Issues, Dr. Gerald N. Johnson, 19:14
Re: [TenTec] PTO Issues, Bwana Bob, 18:11
Re: [TenTec] Attic antennas, Bill Rowlett, 17:43
Re: [TenTec] OT: CQWW Contest: Best DX Cluster URL ?, k3ggn, 17:30
[TenTec] OT: CQWW Contest: Best DX Cluster URL ?, Rick - NJ0IP / DJ0IP, 17:04
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 15:17
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Dr. Gerald N. Johnson, 13:18
Re: [TenTec] Titan 425 and Centurion tune-up, kf6e, 13:03
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 13:03
Re: [TenTec] PTO Issues, Dr. Gerald N. Johnson, 12:36
Re: [TenTec] InRad #755/2800Hz - Make an Offer, Joe Roberts, 12:28
[TenTec] PTO Issues, Don Rasmussen, 12:23
[TenTec] OT: Anyone own a CNC Shop/Need Steady Business?, Art Trampler, 11:19
[TenTec] InRad #755/2800Hz - Make an Offer, alan geller, 11:13
[TenTec] For Sale: Orion, 307 Speaker, D Michael, 10:59
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Dr. Gerald N. Johnson, 10:51
Re: [TenTec] What's the current consensus on PTO grease?, Bwana Bob, 10:43
Re: [TenTec] (no subject), Dr. Gerald N. Johnson, 10:37
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, kf6e, 08:29
Re: [TenTec] (no subject), kf6e, 08:18

November 25, 2010

[TenTec] Omni VII (588AT) for Sale, Dalton McCrary, 18:43
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 17:57
[TenTec] WTB: INRAD #756 2.4kc 9mc, Joe Roberts, 16:28
Re: [TenTec] (no subject), Ken Brown, 14:35
[TenTec] Happy Thanks Giving, John Molenda, 14:34
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Dr. Gerald N. Johnson, 14:29
Re: [TenTec] (no subject), Dr. Gerald N. Johnson, 14:29
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 12:46
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Dr. Gerald N. Johnson, 11:50
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Rob Atkinson, 11:15
[TenTec] Omni 6 Ad., Bill Shekooley, 01:30
[TenTec] Omni VI Station For Sale, Bill Shekooley, 01:28
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Jim Brown, 00:15

November 24, 2010

Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 23:05
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 22:51
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Jim Brown, 20:12
[TenTec] Omni VI Plus, Michael Pendergast, 19:52
Re: [TenTec] Titan 425 Initial Tune-Up settings - high VSWR, Dr. Gerald N. Johnson, 19:48
[TenTec] (no subject), Phil & Debbie Salas, 18:14
[TenTec] WTB Power Supply for Corsair II, Jeff Kelly, 17:27
[TenTec] Titan 425 Initial Tune-Up settings - high VSWR, CSM(r) Gary Huber, 17:21
[TenTec] Inrad 2.8Khz filter installation, Barry N1EU, 15:16
Re: [TenTec] (no subject), Dr. Gerald N. Johnson, 14:43
Re: [TenTec] (no subject), Fred Moore, 14:13
Re: [TenTec] (no subject), Mike Hyder -N4NT-, 13:03
Re: [TenTec] (no subject), Dr. Gerald N. Johnson, 11:10
Re: [TenTec] (no subject), kf6e, 08:06

November 23, 2010

[TenTec] power supply, ROD, 21:50
[TenTec] (no subject), John Chance-Read, 18:32
Re: [TenTec] What's the current consensus on PTO grease?, Stuart Rohre, 17:58
Re: [TenTec] What's the current consensus on PTO grease?, Jack Mandelman, 17:34
Re: [TenTec] What's the current consensus on PTO grease?, Stuart Rohre, 17:32
Re: [TenTec] Bertrand's comments on the Eagle, Richards, 14:36
Re: [TenTec] best power supply for Orion II and other items, Richards, 14:34
[TenTec] FS Corsair parts rig, k8bbm, 14:23
Re: [TenTec] Centurion on 17m, kf6e, 14:20
Re: [TenTec] Centurion on 17m, Richards, 14:14
Re: [TenTec] best power supply for Orion II and other items, Ron Castro, 12:27
Re: [TenTec] Centurion on 17 M, Carter, 11:56
Re: [TenTec] best power supply for Orion II and other items, N3XX, 10:55
Re: [TenTec] Centurion on 17m, kf6e, 10:06
[TenTec] Centurion on 17m, k2ep, 09:48
Re: [TenTec] Bertrand's comments on the Eagle, Rick - NJ0IP / DJ0IP, 09:38
Re: [TenTec] What's the current consensus on PTO grease?, Al Gulseth, 08:54
Re: [TenTec] Centurion on 17 M, Barry N1EU, 08:28
[TenTec] Centurion on 17 M, kf6e, 08:01
Re: [TenTec] best power supply for Orion II and other items, N4PY2, 07:59
Re: [TenTec] best power supply for Orion II and other items, Dr. Gerald N. Johnson, 06:16
Re: [TenTec] best power supply for Orion II and other items, Richards, 00:18

November 22, 2010

Re: [TenTec] best power supply for Orion II and other items, Dr. Gerald N. Johnson, 23:28
Re: [TenTec] Re 02 2.0444A questions, Jack Emerson, 23:07
Re: [TenTec] Bertrand's comments on the Eagle, Richards, 22:47
Re: [TenTec] WTB - Power Supply for a OMNI 6, jkelly, 22:39
Re: [TenTec] Argosy, Roland Anders, 22:05
Re: [TenTec] best power supply for Orion II and other items, Mike Hyder -N4NT-, 20:30
Re: [TenTec] What's the current consensus on PTO grease?, Stuart Rohre, 20:01
Re: [TenTec] best power supply for Orion II and other items, Stuart Rohre, 19:56
Re: [TenTec] OT, Rob Atkinson, 19:42
Re: [TenTec] Omni V chips, Tim, 18:03
[TenTec] For Sale: Orion, 307 Speaker, D Michael, 17:29
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 15:55
[TenTec] Bertrand's comments on the Eagle, Rick - NJ0IP / DJ0IP, 15:54
Re: [TenTec] Re 02 2.0444A questions, John Molenda, 15:43
Re: [TenTec] Re 02 2.0444A questions, N4PY2, 15:12
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 15:01
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 14:59
Re: [TenTec] Re 02 2.0444A questions, John Molenda, 14:46
Re: [TenTec] Re 02 2.0444A questions, N4PY2, 14:16
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 14:11
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 14:06
Re: [TenTec] Re 02 2.0444A questions, Barry N1EU, 13:57
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 13:50
Re: [TenTec] Re 02 2.0444A questions, John Molenda, 13:33
Re: [TenTec] Re 02 2.0444A questions, John Molenda, 13:32
Re: [TenTec] Re 02 2.0444A questions, Rsoifer, 13:10
Re: [TenTec] FS Omni V/VI Filters, Barry N1EU, 12:40
[TenTec] FS Omni V/VI Filters, Terry Burkholder N4TB, 12:27
Re: [TenTec] Omni V chips, kf6e, 10:59
[TenTec] Re 02 2.0444A questions, Emerson, Thomas, 09:39
Re: [TenTec] Orion 2 2.044a Questions, Rsoifer, 08:47

November 21, 2010

Re: [TenTec] Eagle in SS, Rick - NJ0IP / DJ0IP, 23:20
[TenTec] Orion 2 2.044a Questions, Jack Emerson, 22:30
Re: [TenTec] Need to change my setting, Dr. Gerald N. Johnson, 22:22
[TenTec] Need to change my setting, Silverman, 22:06
Re: [TenTec] best power supply for Orion II and other items, John Molenda, 21:55
[TenTec] Omni V chips, Tim, 21:51
[TenTec] Fwd: Re: best power supply for Orion II and other items, John Molenda, 21:46
Re: [TenTec] Eagle in SS, rhgaeg, 21:22
Re: [TenTec] best power supply for Orion II and other items, Dr. Gerald N. Johnson, 20:26
Re: [TenTec] best power supply for Orion II and other items, Phil Chambley Sr., 20:03
Re: [TenTec] best power supply for Orion II and other items, Mike Hyder -N4NT-, 19:54
[TenTec] Eagle in SS, Rick - NJ0IP / DJ0IP, 19:40
Re: [TenTec] best power supply for Orion II and other items, Richards, 19:20
[TenTec] Way O.T.: CQ Dallas area, Rick - NJ0IP / DJ0IP, 19:17
[TenTec] For Sale or Trade, Keith Flint, 18:57
Re: [TenTec] Omni filter trade, Barry N1EU, 18:41
[TenTec] What's the current consensus on PTO grease?, Al Gulseth, 18:14
Re: [TenTec] Power Suppy for Omni 6 & tuners, Richards, 18:00
[TenTec] Ten Tec 263G Corsair II external VFO, W8BVH, 17:40
Re: [TenTec] best power supply for Orion II and other items, Mike Hyder -N4NT-, 16:47
[TenTec] WTB Pegasus, John Huffman, 16:24
Re: [TenTec] best power supply for Orion II and other items, Don Jones, 16:06
[TenTec] best power supply for Orion II and other items, John Molenda, 15:50
Re: [TenTec] Power Suppy for Omni 6 & tuners, Dr. Gerald N. Johnson, 15:08
Re: [TenTec] Power Suppy for Omni 6 & tuners, Dr. Gerald N. Johnson, 15:04
Re: [TenTec] Power Suppy for Omni 6 & tuners, Ken Brown, 14:53
Re: [TenTec] Power Suppy for Omni 6 & tuners, d . e . warnick, 14:31
Re: [TenTec] Triton IV Digital CW Sidetone Adjustment, ah8dx, 13:43
Re: [TenTec] Triton IV Digital CW Sidetone Adjustment, Ed Malmgren, 13:33
Re: [TenTec] Triton IV Digital CW Sidetone Adjustment, mike bryce, 13:26
Re: [TenTec] Triton IV Digital CW Sidetone Adjustment, Jim Younce, 13:19
Re: [TenTec] Triton IV Digital CW Sidetone Adjustment, geoffrey mendelson, 13:15
Re: [TenTec] Bussman MTC-16, Dr. Gerald N. Johnson, 12:35
Re: [TenTec] Power Supply Omni 6, Dr. Gerald N. Johnson, 12:35
Re: [TenTec] Power Supply Omni 6, Richards, 11:50
[TenTec] Omni filter trade, Barry N1EU, 11:33
Re: [TenTec] Power Supply Omni 6, Dr. Gerald N. Johnson, 11:00
[TenTec] Power Supply Omni 6, Roger Rippy, 09:39
Re: [TenTec] Power Suppy for Omni 6 & tuners, Rick - NJ0IP / DJ0IP, 09:36
[TenTec] Power Suppy for Omni 6 & tuners, Roger Rippy, 08:43
[TenTec] Orion II and WSPR ?, DL2RDH, 02:35

November 20, 2010

[TenTec] Triton IV Digital CW Sidetone Adjustment, Craig Maxey, 19:40
Re: [TenTec] WTB - Power Supply for a OMNI 6, Don Jones, 17:39
Re: [TenTec] WTB - Power Supply for a OMNI 6, Ron Notarius W3WN, 16:41
Re: [TenTec] OT, Jim Brown, 12:27
Re: [TenTec] OT, Steve Hunt, 03:45

November 19, 2010

Re: [TenTec] OT, Rob Atkinson, 21:56
Re: [TenTec] WTB - Power Supply for a OMNI 6, Rick - NJ0IP / DJ0IP, 16:52
Re: [TenTec] WTB - Power Supply for a OMNI 6, N4PY2, 16:12
Re: [TenTec] WTB - Power Supply for a OMNI 6, Don Jones, 15:56
Re: [TenTec] WTB - Power Supply for a OMNI 6, Rick - NJ0IP / DJ0IP, 15:51
Re: [TenTec] WTB - Power Supply for a OMNI 6, Walt Amos, 15:44
Re: [TenTec] WTB - Power Supply for a OMNI 6, k8bbm, 15:20
[TenTec] out of the office, john . brewer, 15:19
Re: [TenTec] WTB - Power Supply for a OMNI 6, Jim Brown, 15:03
[TenTec] WTB - Power Supply for a OMNI 6, Don Jones, 14:08
Re: [TenTec] OT, Jim Brown, 14:04
[TenTec] RX audio on the eagle, John Molenda, 12:34
Re: [TenTec] WTB: Inrad #754 filter, Barry N1EU, 11:54
Re: [TenTec] WTB: Inrad #754 filter, Terry Burkholder N4TB, 11:34
Re: [TenTec] WTB: Inrad #754 filter, alan geller, 10:49
[TenTec] WTB: Inrad #754 filter, Barry N1EU, 09:35
Re: [TenTec] OT, Steve Hunt, 06:30

November 18, 2010

Re: [TenTec] OT, Rob Atkinson, 23:10
Re: [TenTec] Argosy, Mike Hyder -N4NT-, 20:05
Re: [TenTec] OT, Jim Brown, 18:16
Re: [TenTec] Your message to TenTec awaits moderator approval, Walt Amos, 17:41
Re: [TenTec] OT, Steve Hunt, 17:24
Re: [TenTec] Your message to TenTec awaits moderator approval, John Hill, 16:22
Re: [TenTec] Argosy, Rick - NJ0IP / DJ0IP, 15:50
Re: [TenTec] Argosy (volume change problem), Stuart Rohre, 14:42
[TenTec] Argosy, John Graves, 14:28
Re: [TenTec] OT, Rob Atkinson, 13:21
[TenTec] Transfering Rob's Email To New Account, kz2g, 10:55
Re: [TenTec] OT, Steve Hunt, 03:42

November 17, 2010

Re: [TenTec] Your message to TenTec awaits moderator approval, John Molenda, 23:54
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Price Smith, 21:49
Re: [TenTec] OT Air core balun on line, Stuart Rohre, 18:53
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Carl, 18:41
Re: [TenTec] OT, Jim Brown, 17:09
[TenTec] Complete set of Ten-Tec Modules for Model #555 Scout - FOR SALE - $600.-, al sirois, 14:36
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Joseph or Ruth Patrick, 13:33
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 12:47
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 12:35
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 12:34
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 12:32
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Don Jones, 12:24
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 12:09
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Don Jones, 12:02
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Dr. Gerald N. Johnson, 11:57
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, LARRY D GODEK, 11:55
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, D C *Mac* Macdonald, 11:40
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, john91, 11:09
[TenTec] Fwd: Bird Termaline 50 Ohm load - 82A - Need adapter, Bill Mellema, 11:01
Re: [TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter, Carl, 10:59
Re: [TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Phil Sussman, 10:47
[TenTec] Bird Termaline 50 Ohm load - 82A - Need adapter, Bill Mellema, 10:44
Re: [TenTec] 4229 Tuner Balun Replacement?, Scott Walker, 09:04
Re: [TenTec] OT, Barry N1EU, 06:45
[TenTec] OT, John Molenda, 00:30
Re: [TenTec] 4229 Tuner Balun Replacement?, Richards, 00:01

November 16, 2010

Re: [TenTec] 4229 Tuner Balun Replacement?, Rick - NJ0IP / DJ0IP, 17:47
Re: [TenTec] 4229 Tuner Balun Replacement?, Glenn AE0Q, 16:37
[TenTec] Ekletech remote encoder, Barry N1EU, 16:23
Re: [TenTec] Question for techies, Rick - NJ0IP / DJ0IP, 16:16
Re: [TenTec] Question for techies, Kimberly Elmore, 16:12
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 16:08
Re: [TenTec] Question for techies, Walt Amos, 15:55
Re: [TenTec] Question for techies, Hank Garretson, 15:50
Re: [TenTec] Question for techies, Rick - NJ0IP / DJ0IP, 15:42
Re: [TenTec] Question for techies, Hank Garretson, 14:59
Re: [TenTec] Question for techies, Martin Ewing, 14:45
Re: [TenTec] Question for techies, Rick - NJ0IP / DJ0IP, 13:13

November 15, 2010

Re: [TenTec] FS: RX-350, N4PY2, 22:08
Re: [TenTec] FS: RX-350, Bruce, 22:00
Re: [TenTec] FS: RX-350, John Molenda, 21:16
[TenTec] FS: RX-350, Bruce, 20:34
Re: [TenTec] OT: Open Wire Feedline, Stuart Rohre, 18:55
Re: [TenTec] 4229 Tuner Balun Replacement?, Stuart Rohre, 17:01
[TenTec] OT: Open Wire Feedline, Rick - NJ0IP / DJ0IP, 16:46
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 16:45
Re: [TenTec] Scout S-Meter Fail (nitpick follow-up), Dr. Gerald N. Johnson, 16:43
Re: [TenTec] 4229 Tuner Balun Replacement?, Stuart Rohre, 16:28
Re: [TenTec] Scout S-Meter Fail (nitpick follow-up), Bill Acito W1PA, 16:14
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 14:56
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 14:43
Re: [TenTec] 4229 Tuner Balun Replacement?, Don Jones, 13:09
Re: [TenTec] 4229 Tuner Balun Replacement?, Richards, 12:18
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 09:57
Re: [TenTec] 4229 Tuner Balun Replacement?, Don Jones, 09:34
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 07:12
Re: [TenTec] 4229 Tuner Balun Replacement?, John Molenda, 01:52
Re: [TenTec] link coupled tuners, Rob Atkinson, 01:08

November 14, 2010

Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 21:34
Re: [TenTec] 4229 Tuner Balun Replacement?, Richards, 20:49
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 20:04
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 19:25
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 19:25
[TenTec] OT: Open Wire or Coax ?, Rick - NJ0IP / DJ0IP, 15:25
Re: [TenTec] Orion I, reduced output power ???, Roland Anders, 15:21
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 15:20
Re: [TenTec] Orion I, reduced output power ???, Roland Anders, 15:16
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 15:10
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 14:21
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 14:11
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 14:10
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 13:52
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 13:46
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 13:44
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 13:38
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 13:30
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 13:18
Re: [TenTec] 4229 Tuner Balun Replacement?, Don Jones, 13:17
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 12:49
Re: [TenTec] 4229 Tuner Balun Replacement?, Steve Hunt, 12:13
[TenTec] Speech Processor on Omni VI+, WILLIAM STEVENSON, 09:11
[TenTec] Fw: Argosy 525 offset for CW ...issues, Mike Hyder -N4NT-, 01:03

November 13, 2010

Re: [TenTec] 4229 Tuner Balun Replacement?, Ken Brown, 22:59
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 22:09
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 21:43
Re: [TenTec] 4229 Tuner Balun Replacement?, Phil Sussman, 21:32
Re: [TenTec] 4229 Tuner Balun Replacement?, Rick - NJ0IP / DJ0IP, 21:31
Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson, 21:07
Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown, 12:21
Re: [TenTec] Very nice response....thank you, Dave., al sirois, 04:39

November 12, 2010

[TenTec] sherwood, ROD, 22:07
Re: [TenTec] Orion I, reduced output power ???, Dr. Gerald N. Johnson, 21:41
Re: [TenTec] Orion I, reduced output power ???, Rick W, 21:30
Re: [TenTec] Very nice response....thank you, Dave., al sirois, 19:30
Re: [TenTec] Orion I, reduced output power ???, Dr. Gerald N. Johnson, 19:27
Re: [TenTec] 4229 Tuner Balun Replacement?, Stuart Rohre, 19:22
Re: [TenTec] Orion I, reduced output power ???, Denton, 19:13
[TenTec] Orion I, reduced output power ???, Rick - NJ0IP / DJ0IP, 19:09
[TenTec] WTB Excellent Argonaut V with TXCO, Jeff Kelly, 17:18
[TenTec] For Sale: Orion, 307 Speaker, D Michael, 16:57
Re: [TenTec] I'm looking for a T-T Model #238...Delta-II remote VFO, d . e . warnick, 15:28
[TenTec] I'm looking for a T-T Model #238...Delta-II remote VFO, al sirois, 15:16
[TenTec] 4229 Tuner Balun Replacement?, Scott Walker, 10:16
Re: [TenTec] IR XTAL Filters for your Omni 6 (+), Skip Leininger, 00:57

November 11, 2010

[TenTec] Milt Sullivan, K8YDO SK RL Drake Chief Engineer, Jim Brown, 23:59
[TenTec] OMNI VI, Albert Brooks, 21:17
Re: [TenTec] (no subject), Jim Huicks, 19:28
[TenTec] Eagle Firmware Version 1.688 posted, Henry, John, 17:41
[TenTec] Sell Omni 6+ (Ten-Tec #564), Richard Lee, 17:38
Re: [TenTec] Argosy 525 offset for CW ...issues, scott sheppard, 17:01
Re: [TenTec] Argosy 525 offset for CW ...issues, Mike Hyder -N4NT-, 16:18
Re: [TenTec] Need help understanding Orion II receive artifact, N4PY2, 15:59
Re: [TenTec] Need help understanding Orion II receive artifact, David Feldman, 15:32
[TenTec] Argosy 525 offset for CW ...issues, scott sheppard, 15:04
Re: [TenTec] (no subject), Dr. Gerald N. Johnson, 13:30
[TenTec] (no subject), Jim Huicks, 12:22
[TenTec] IR XTAL Filters for your Omni 6 (+), alan geller, 11:44

November 10, 2010

Re: [TenTec] Need help understanding Orion II receive artifact, Dr. Gerald N. Johnson, 20:39
Re: [TenTec] TenTec Product Status Update, Bruce McLaughlin, 20:04
Re: [TenTec] TenTec Product Status Update, Richards, 18:01
Re: [TenTec] TenTec Product Status Update, Al Baker, 17:57
Re: [TenTec] Titan 425 PS replacement filter board, CSM(r) Gary Huber, 17:53
Re: [TenTec] Need help understanding Orion II receive artifact, pfizenmayer, 17:34
[TenTec] Need help understanding Orion II receive artifact, David Feldman, 17:10
Re: [TenTec] TenTec Product Status Update, Al Baker, 16:59
Re: [TenTec] TenTec Product Status Update, Rick - NJ0IP / DJ0IP, 16:52
Re: [TenTec] TenTec Product Status Update, W4ABW, 16:43
Re: [TenTec] TenTec Product Status Update, Douglas Shock, 16:31
Re: [TenTec] TenTec Product Status Update, Richards, 16:15
[TenTec] Titan 425 PS replacement filter board, Gene Sochor, 15:39
Re: [TenTec] TenTec Product Status Update, Rick W, 15:26
Re: [TenTec] TenTec Product Status Update, art davis, 15:25
Re: [TenTec] TenTec Product Status Update, Martin Ewing, 15:00
Re: [TenTec] TenTec Product Status Update, John Molenda, 14:06
[TenTec] TenTec Product Status Update, Henry, John, 13:35

November 09, 2010

Re: [TenTec] WTB Mint Omni 6+, John Peters, 20:04
Re: [TenTec] Argosy AGC mods---tantalum capacitors--whats the difference?, Stuart Rohre, 15:48
[TenTec] WTB Mint Omni 6+, Jeff Kelly, 15:02
Re: [TenTec] installing ladder line, Steve Hunt, 14:24
Re: [TenTec] installing ladder line, Dr. Gerald N. Johnson, 13:40
[TenTec] Fw: Re:Ten Tec model 1210 transverter for sale., W8BVH, 05:37
Re: [TenTec] installing ladder line, Steve Hunt, 05:14
Re: [TenTec] installing ladder line, Dr. Gerald N. Johnson, 04:20
[TenTec] installing ladder line, Jim WA9YSD, 04:10
Re: [TenTec] installing ladder line, JAMES HANLON, 01:07
Re: [TenTec] Argosy AGC mods---tantalum capacitors--whats the difference?, Dr. Gerald N. Johnson, 00:14

November 08, 2010

[TenTec] Argosy AGC mods---tantalum capacitors--whats the difference?, scott sheppard, 21:35
Re: [TenTec] Downloads for Orion ll, Philip C. Anderson, 19:37
Re: [TenTec] installing ladder line, Rick - NJ0IP / DJ0IP, 19:17
[TenTec] The Eagle has landed again, Rick - NJ0IP / DJ0IP, 19:12
Re: [TenTec] installing ladder line, Stuart Rohre, 19:09
Re: [TenTec] installing ladder line, Stuart Rohre, 19:05
Re: [TenTec] Scout S-Meter Fail, Stuart Rohre, 18:58
Re: [TenTec] OT: Indoor antenna, Rick - NJ0IP / DJ0IP, 13:41
Re: [TenTec] OT: Indoor antenna, Alan Pike, 13:35
Re: [TenTec] OT: Indoor antenna, Dr. Gerald N. Johnson, 13:30
[TenTec] N4PY Orion program now controls new Tentec Eagle, N4PY2, 13:22
Re: [TenTec] Scout S-Meter Fail, Bill Acito W1PA, 11:05
Re: [TenTec] Downloads for Orion ll, Rsoifer, 08:31

November 07, 2010

Re: [TenTec] installing ladder line, Tony Berg, 18:27
Re: [TenTec] installing ladder line, Dr. Gerald N. Johnson, 18:23
Re: [TenTec] Ten Tec model 1210 transverter for sale., W8BVH, 17:45
Re: [TenTec] installing ladder line, Paul Christensen, 17:41
[TenTec] WTB: 1208 Manual, Ron Notarius W3WN, 17:37
Re: [TenTec] installing ladder line, Steve Hunt, 17:19
[TenTec] OT: Indoor antenna, John B. Egger, 16:57
Re: [TenTec] installing ladder line, steve r, 16:54
[TenTec] The Ten-Tec Jupiter # 538 is SOLD., al sirois, 16:51
Re: [TenTec] installing ladder line, John Hill, 16:28
Re: [TenTec] installing ladder line, Rick - NJ0IP / DJ0IP, 15:40
Re: [TenTec] installing ladder line, John Molenda, 15:38
[TenTec] installing ladder line, Vince Santis, 15:36
[TenTec] Centaur Amp, Jeff Walker, 15:19
Re: [TenTec] Downloads for Orion ll, John Molenda, 14:53
[TenTec] Downloads for Orion ll, Philip C. Anderson, 14:48
Re: [TenTec] TEN TEC 229B Tuner For Sale, Albert Brooks, 01:21

November 06, 2010

Re: [TenTec] Scout S-Meter Fail, mike bryce, 22:55
[TenTec] Scout S-Meter Fail, Bill Acito, 22:49
[TenTec] TEN TEC 229B Tuner For Sale, Albert Brooks, 19:52
[TenTec] NIR-10 funds on the way, Bill Harris, 12:20
Re: [TenTec] 960 Power Supply Question, Dr. Gerald N. Johnson, 12:20
[TenTec] FS 260 pwr supply, k8bbm, 11:20
Re: [TenTec] 960 Power Supply Question, Carl Winkles, 10:52
Re: [TenTec] TT 6n2 wanted, Steven Kline, 10:38
Re: [TenTec] 960 Power Supply Question, Rick - NJ0IP / DJ0IP, 09:09
[TenTec] 960 Power Supply Question, Ben Hall, 09:04
[TenTec] TT 6n2 wanted, Mr Mike, 01:57

November 05, 2010

[TenTec] Ten-Tec Titan III, Art Trampler, 22:23
[TenTec] 2M FM, ROD, 19:52
Re: [TenTec] Paragon II 586 keyer, Rick and Karen Bunn, 19:44
[TenTec] For Sale: Orion, 6N2 xcvr, 307 Speaker, 1315 15M QRP CW Xcvr, D Michael, 17:00
[TenTec] Paragon II 586 keyer, Tom Mandera, 15:59
Re: [TenTec] Orion 565 FW update?, Al Baker, 12:46
[TenTec] Orion 565 FW update?, Shane Mattson-->K1ZR, 12:32
Re: [TenTec] Paragon II / Other Opinions, Bwana Bob, 12:00
[TenTec] Centaur for sale, Jeff Walker, 11:52
[TenTec] Eagle Update, Henry, John, 10:01
[TenTec] FS filters, k8bbm, 09:55
Re: [TenTec] WTB: Paragon II, Bob Good, 09:22
Re: [TenTec] WTB: Paragon II, N4PY2, 08:22
Re: [TenTec] WTB: Paragon II, Vic Klein, 08:14

November 04, 2010

[TenTec] anyone using 811h with omni V ?, John Molenda, 21:20
Re: [TenTec] FS 263VFO, k8bbm, 20:00
Re: [TenTec] WTB: Paragon II, w1dxh, 16:15
Re: [TenTec] FS: 526 rig, John, 16:05
Re: [TenTec] FS 263VFO, phil g, 15:33
[TenTec] FS: 526 rig, David Drake, 15:12
[TenTec] FS 263VFO, k8bbm, 12:54

November 03, 2010

[TenTec] TenTec HF Rig, Power Supplies, and Desk Microphones FS, Ken Simpson, W8EK, 21:56
[TenTec] WTB: Paragon II, K8JDC, 20:26
Re: [TenTec] What_Model_Ten-Tec_Rig_Do_I_Need_?, d . e . warnick, 15:11
Re: [TenTec] What_Model_Ten-Tec_Rig_Do_I_Need_?, John Westerlage, 14:27
[TenTec] Omni VI Plus, Jack Mandelman, K1VT, 14:11
[TenTec] FS: Omni VI Plus, John Rippey, 12:41
[TenTec] Fwd: Ten-Tec OMNI-6-Option III, Mod#563, $1050.- For Sale, John Peters, 10:39

November 02, 2010

Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Edward Feustel, 17:04

November 01, 2010

[TenTec] OT Tuner, John Molenda, 23:12
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Joel R. Hallas, 21:05
[TenTec] Tuners, Roger Rippy, 20:03
Re: [TenTec] Tuners, Richards, 19:27
Re: [TenTec] (no subject), Richards, 19:24
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, kc9cdt, 19:11
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, David W LeJeune, Sr, 18:56
Re: [TenTec] (no subject), Bill Rowlett, 17:48
Re: [TenTec] Tuners, John Peters, 17:47
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Michael Goins, 17:22
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Stuart Rohre, 17:08
Re: [TenTec] Tuners, Mike Hyder -N4NT-, 16:02
Re: [TenTec] (no subject), Rsoifer, 15:09
Re: [TenTec] (no subject), Richards, 14:59
Re: [TenTec] Tuners, Richards, 14:47
Re: [TenTec] (no subject), Richards, 14:34
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, w8au, 14:04
Re: [TenTec] Tuners, Jim Brown, 13:44
Re: [TenTec] (no subject), Rick - NJ0IP / DJ0IP, 13:30
Re: [TenTec] (no subject), Art Trampler, 13:27
Re: [TenTec] (no subject), David Goncalves, 13:10
Re: [TenTec] (no subject), Richards, 12:57
Re: [TenTec] Tuners, N3XX, 12:03
[TenTec] (no subject), ROD, 10:20
Re: [TenTec] Tuners, Mike Hyder -N4NT-, 09:47
[TenTec] How to build a watch (What Model Ten-Tec Rig Do I Need ?), Mike Hyder -N4NT-, 09:24
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, d . e . warnick, 09:20
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Rick - NJ0IP / DJ0IP, 09:07
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, d . e . warnick, 08:38
[TenTec] Tuners, Roger Rippy, 08:05