TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TenTec] 4229 Tuner Balun Replacement?

from [Stuart Rohre] [Permanent Link][Original]
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] 4229 Tuner Balun Replacement?
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 15 Nov 2010 16:01:16 -0600
List-post: <mailto:tentec@contesting.com>
Technically, you don't have a balun in a link coupled tuner. The link is an independent balanced connection to the transmission line already, and thus balanced in and of itself. In fact, it is the ideal balanced coupler. Placed at the optimum point on the tuned circuit, the link should be balanced well. 

-Stuart Rohre
K5KVH
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TenTec] OT: Open Wire Feedline, Rick - NJ0IP / DJ0IP
Next by Date:  Re: [TenTec] OT: Open Wire Feedline, Stuart Rohre
Previous by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Richards
Next by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Stuart Rohre
Indexes:  [Date] [Thread] [Top] [All Lists]