TenTec
[Top] [All Lists]

Re: [TenTec] WTB - Power Supply for a OMNI 6

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] WTB - Power Supply for a OMNI 6
From: "Don Jones" <ko7i@comcast.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 19 Nov 2010 12:56:26 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
So is the correct power supply the Model 692?

Don 


-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Rick - NJ0IP / DJ0IP
Sent: Friday, November 19, 2010 12:52 PM
To: 'Walt Amos'; 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] WTB - Power Supply for a OMNI 6

And that was only true up to the Omni VI+.

They stopped that when they switched to the 963 PS.
So with the Orions, Omni VII, and Eagle, you may use anything.

I am uncertain if the Jupiter needs it or not.

73
Rick

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Walt Amos
Sent: Friday, November 19, 2010 2:44 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] WTB - Power Supply for a OMNI 6

Well, that's just not quite true, yes, they will run fine on any old power 
supply BUT the catch 22 is they need the 25 amp fuse or breaker between the 
rig and supply as the TT gear can draw excess current and blow the internal 
fuse if you don't have the breaker and happen to use the wrong antenna or 
maybe no antenna or otherwise run it into a mismatched load.

Walt K8CV Royal Oak, MI.



----- Original Message ----- 
From: "Jim Brown" <k9yc@audiosystemsgroup.com>
To: <tentec@contesting.com>
Sent: Friday, November 19, 2010 3:03 PM
Subject: Re: [TenTec] WTB - Power Supply for a OMNI 6


> On 11/19/2010 11:08 AM, Don Jones wrote:
>> Just picked up a OMNI 6, looking for the Ten Tec matching power supply.
>
> I've never understood the importance of a "matching power supply."  Ten
> Tec gear is quite well designed, and runs just fine from any decent
> 12-14VDC source. Anything from an Astron linear supply to a small supply
> float-charging an auto battery. I've done both, but the latter is what
> I've most often used.  I've run my Herc II from a couple of big Astrons,
> and now from a 100A switching supply.  Some guys run theirs from a big
> battery that's float-charged by a 30A Astron.
>
> 73, Jim K9YC
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>