Re: [TenTec] omni 6+/ power issue

[Ken Brown <ken.d.brown@hawaiiantel.net>]

> The tuner confuses the issue a bit, but are the tuner settings where they 
> normally are for 20m?
>   
If you don't have a good 50 ohm non-inductive termination (dummy load) 
you should get one. It really helps to simplify the system when 
troubleshooting. With a standard 50 ohm termination and a power 
monitoring device (doesn't have to be a real good one, just one that you 
can use as a comparison from other rigs and bands) you will be able to 
determine whether it is a problem with the rig and not the load.
DE N6KB