[Amps] AL-811, Ray, 2003/12/31

• Re: [Amps] AL-811, R . Measures, 2003/12/31

[Amps] 160/80m amp tube recommendations, Neil Carr G0JHC, 2003/12/31

• Re: [Amps] 160/80m amp tube recommendations, Steven Grant W4IIV, 2003/12/31
  • RE: [Amps] 160/80m amp tube recommendations, Neil Carr G0JHC, 2003/12/31
• Re: [Amps] 160/80m amp tube recommendations, DF3KV, 2003/12/31

[Amps] Re: Amps Digest, Vol 12, Issue 59, gw4dgu, 2003/12/31

• Re: [Amps] Re: Amps Digest, Vol 12, Issue 59, R . Measures, 2003/12/31

Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ? (fwd), rfdude, 2003/12/29

• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Frank Goenninger, 2003/12/30

[Amps] 30m1, ZL2AAA, 2003/12/28

• Re: [Amps] 30m1, skipp isaham, 2003/12/29

[Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Frank Goenninger, 2003/12/28

• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Dan, 2003/12/28
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Frank Goenninger, 2003/12/28
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, jeff millar, 2003/12/28
  • RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Dr. William J. Schmidt, II, 2003/12/28
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/28
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Ian White, G3SEK, 2003/12/29
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/28
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Dr. William J. Schmidt, II, 2003/12/28
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Vic Rosenthal, 2003/12/28
    • RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Dr. William J. Schmidt, II, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Vic Rosenthal, 2003/12/29
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Steve Thompson, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
  • RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Dr. William J. Schmidt, II, 2003/12/29
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Gary Schafer, 2003/12/29
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, jeff millar, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Paul and Abbi Elliott, 2003/12/29
• Re: Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Bill L. Fuqua, 2003/12/29
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Vic Rosenthal, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Ian White, G3SEK, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• RE: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/29
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/30
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Ian White, G3SEK, 2003/12/30
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/30
  • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Ian White, G3SEK, 2003/12/30
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, jeff millar, 2003/12/30
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, GGLL, 2003/12/30
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Gary Schafer, 2003/12/30
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, Ian White, G3SEK, 2003/12/31
    • Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, k7fm, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31
• Re: [Amps] 3.5 kV 2A REGULATED Power Supply: Schematic ?, R . Measures, 2003/12/31

[Amps] Heath Williamson Amplifier, W B Reese, 2003/12/28

• Fw: [Amps] Heath Williamson Amplifier, skipp isaham, 2003/12/28

[Amps] re: Heathkit loads, skipp isaham, 2003/12/28

• Re: [Amps] re: Heathkit loads, wb8jkr, 2003/12/28

[Amps] DUMMY LOADS, Harold B. Mandel, 2003/12/28

• Re: [Amps] DUMMY LOADS, Don Havlicek, 2003/12/28
• Re: [Amps] DUMMY LOADS, R . Measures, 2003/12/28
• Re: [Amps] DUMMY LOADS, R . Measures, 2003/12/28

[Amps] Drake 2880, ON5KM, 2003/12/27

• Re: [Amps] Drake 2880, Masamichi Kawamura, 2003/12/27

[Amps] Anyone know heater volts and current for a 203A?, tongaloa, 2003/12/27

• Re: [Amps] Anyone know heater volts and current for a 203A?, Marcinio, 2003/12/27
• Re: [Amps] Anyone know heater volts and current for a 203A?, Don Havlicek, 2003/12/27

[Amps] Vacuum Relays for Sale, Harold B. Mandel, 2003/12/27

• Re: [Amps] Vacuum Relays for Sale, R . Measures, 2003/12/27

[Amps] Shelf life of 3CPX800A7 tubes, KD7EFQ, 2003/12/26

• Re: [Amps] Shelf life of 3CPX800A7 tubes, Barrie Smith, 2003/12/27
• Re: [Amps] Shelf life of 3CPX800A7 tubes, Gudguyham, 2003/12/27
• Re: [Amps] Shelf life of 3CPX800A7 tubes, R . Measures, 2003/12/27

[Amps] Vacuum relays in Dentron MLA-2500, Don Knight, 2003/12/26

• Re: [Amps] Vacuum relays in Dentron MLA-2500, W8AV, 2003/12/26
  • Re: [Amps] Vacuum relays in Dentron MLA-2500, Don Knight, 2003/12/26
    • Re: [Amps] Vacuum relays in Dentron MLA-2500, David A. Pruett, 2003/12/26
    • Re: [Amps] Vacuum relays in Dentron MLA-2500, Pete Smith, 2003/12/26
    • Re: [Amps] Vacuum relays in Dentron MLA-2500, Vic Rosenthal, 2003/12/26
    • Re: [Amps] Vacuum relays in Dentron MLA-2500, Pete Smith, 2003/12/26
    • Re: [Amps] Vacuum relays in Dentron MLA-2500, Vic Rosenthal, 2003/12/27
• Re: [Amps] Vacuum relays in Dentron MLA-2500, R . Measures, 2003/12/26
• Re: [Amps] Vacuum relays in Dentron MLA-2500, R . Measures, 2003/12/26
• Re: [Amps] Vacuum relays in Dentron MLA-2500, R . Measures, 2003/12/27
• Re: [Amps] Vacuum relays in Dentron MLA-2500, Dick Knol, 2003/12/27

[Amps] Dentron Clipperton L on 17 meters, montytaylor, 2003/12/25

• [Amps] Dentron Clipperton L on 17 meters, monty taylor, 2003/12/26
  • Re: [Amps] Dentron Clipperton L on 17 meters, Vic Rosenthal, 2003/12/26

Fw: [Amps] HELP...off topic.. slow picture loads, skipp isaham, 2003/12/25

• [Amps] HELP...off topic.. slow picture loads, dj2001, 2003/12/25
• Re: Fw: [Amps] HELP...off topic.. slow picture loads, Gudguyham, 2003/12/26
  • Re: Fw: [Amps] HELP...off topic.. slow picture loads, Ed Briggs, 2003/12/26

[Amps] HELP...off topic...but..., Gudguyham, 2003/12/25

• Re: [Amps] HELP...off topic...but..., Joe Isabella, 2003/12/25
• Re: [Amps] HELP...off topic...but..., Gudguyham, 2003/12/25
• Fw: [Amps] HELP...off topic...but..., John, 2003/12/25

[Amps] Groth Turns Counters, David A. Pruett, 2003/12/25

• Re: [Amps] Groth Turns Counters, Kenneth D. Grimm, K4XL, 2003/12/25

[Amps] disk caps needed, Don Knight, 2003/12/24

• Re: [Amps] disk caps needed, Karl-Arne Markström, 2003/12/25
• Re: [Amps] disk caps needed, Don Knight, 2003/12/25
  • [Amps] disk caps needed, Dick Knol, 2003/12/25
  • Re: [Amps] disk caps needed, Vic Rosenthal, 2003/12/25

[Amps] Happy Holidays & New Year Plans, Gudguyham, 2003/12/24

• Re: [Amps] Happy Holidays & New Year Plans, R . Measures, 2003/12/24

[Amps] replacement to 3B28 rectifiers in certain HF Amps, rfdude, 2003/12/23

• RE: [Amps] replacement to 3B28 rectifiers in certain HF Amps, Patrick A. Thompson Sr., 2003/12/23

[Amps] 7527A, ON5KM, 2003/12/23

• Re: [Amps] 7527A, Peter Frenning, OZ1PIF, 2003/12/23
• Re: [Amps] 7527A, DF3KV, 2003/12/23
• [Amps] 7527A, ON5KM, 2003/12/27

[Amps] Fw: airspaced C's, ON5KM, 2003/12/23

• Re: [Amps] Fw: airspaced C's, Karl-Arne Markström, 2003/12/23
• Re: [Amps] Fw: airspaced C's, R . Measures, 2003/12/23
  • Re: [Amps] Fw: airspaced C's, Tomm Aldridge, 2003/12/23
    • RE: [Amps] Fw: airspaced C's, George K. Watson, 2003/12/23
• Re: [Amps] Fw: airspaced C's, R . Measures, 2003/12/23
  • Re: [Amps] Fw: airspaced C's, Tomm Aldridge, 2003/12/23
  • Re: [Amps] Fw: airspaced C's, Phil Clements, 2003/12/23

[Amps] max plate voltage for 4cx800a/GU74B, K1WPO, 2003/12/23

• Re: [Amps] max plate voltage for 4cx800a/GU74B, R . Measures, 2003/12/23

[Amps] SB-220 Tune Cap Replacement, Jeff Weinberg W8CQ, 2003/12/22

• Re: [Amps] SB-220 Tune Cap Replacement, R . Measures, 2003/12/22
• [Amps] SB-220 Tune Cap Replacement, Jeff Weinberg W8CQ, 2003/12/23

[Amps] Swan Mark 1 Resting Plate Current, Bill Smith, 2003/12/22

• Re: [Amps] Swan Mark 1 Resting Plate Current, Dennis Watkins, 2003/12/23
• Re: [Amps] Swan Mark 1 Resting Plate Current, ka1xo, 2003/12/22

[Amps] DIODE / RECTIFIER BLOCKS: SILEC: SPECS ?, W.F van Wyk, 2003/12/21

• Re: [Amps] DIODE / RECTIFIER BLOCKS: SILEC: SPECS ?, R . Measures, 2003/12/21

[Amps] Re: Amps Digest, Vol 12, Issue 41, K3vw, 2003/12/20

• Re: [Amps] Re: Amps Digest, Vol 12, Issue 41, R . Measures, 2003/12/20

[Amps] 3CX1500D3, George Yazzolino, 2003/12/20

• Re: [Amps] 3CX1500D3, RICHARD GEORGE, 2003/12/20
  • Re: [Amps] 3CX1500D3, AA6DX, 2003/12/20
    • Re: [Amps] 3CX1500D3, RICHARD GEORGE, 2003/12/20

[Amps] Ceraminc Tube Testing Services Sought, RTTYMAN, 2003/12/20

• Re: [Amps] Ceraminc Tube Testing Services Sought, R . Measures, 2003/12/20

[Amps] Re: OPINIONS PLEASE, Gudguyham, 2003/12/20

• Re: [Amps] Re: OPINIONS PLEASE, R . Measures, 2003/12/20

[Amps] Delay Relay, Don Knight, 2003/12/20

• Re: [Amps] Delay Relay, Steven Grant W4IIV, 2003/12/20

[Amps] TL-922, Bill, KE5OG, 2003/12/19

• Re: [Amps] TL-922, R . Measures, 2003/12/20

RE: [BULK] - [Amps] OPINIONS PLEASE, Steve Katz, 2003/12/19

• RE: [BULK] - [Amps] OPINIONS PLEASE, R . Measures, 2003/12/19

[Amps] Various WD7S Boards, Steve, 2003/12/19

• RE: [Amps] Various WD7S Boards, Jaime P.Ullívarri, 2003/12/20

[Amps] OPINIONS PLEASE, Gudguyham, 2003/12/18

• Re: [Amps] OPINIONS PLEASE, Dudley Hurry, 2003/12/19
• Re: [Amps] OPINIONS PLEASE, RICHARD GEORGE, 2003/12/19
  • Re: [Amps] OPINIONS PLEASE, Tomm Aldridge, 2003/12/19
• Re: [Amps] OPINIONS PLEASE, Peter Frenning, OZ1PIF, 2003/12/19
• Re: [Amps] OPINIONS PLEASE, Michael Tope, 2003/12/20
• Re: [Amps] OPINIONS PLEASE, Ed Briggs, 2003/12/20
• Re: [Amps] OPINIONS PLEASE, Gudguyham, 2003/12/19
• [Amps] OPINIONS PLEASE, k7fm, 2003/12/19
• Re: [Amps] OPINIONS PLEASE, R . Measures, 2003/12/20
• Re: [Amps] OPINIONS PLEASE, Gudguyham, 2003/12/20
  • Re: [Amps] OPINIONS PLEASE, Dino Darling, 2003/12/23
    • [Amps] AL-1200 for sale..., Dino Darling, 2003/12/26

Re: [Amps] Really Big Solid State Power Amplifiers, R . Measures, 2003/12/18

• Re: [Amps] Really Big Solid State Power Amplifiers, peter . chadwick, 2003/12/19

Re: [Amps] Buck boost transformer, ka1xo, 2003/12/18

• Re: [Amps] Buck boost transformer, R . Measures, 2003/12/18

[Amps] Re: Amps Digest, Vol 12, Issue 35, K3vw, 2003/12/18

• [Amps] Re: Amps Digest, Vol 12, Issue 35, gw4dgu, 2003/12/18
  • Re: [Amps] Re: Amps Digest, Vol 12, Issue 35, Bill Fuqua, 2003/12/18
• Re: [Amps] Re: Amps Digest, Vol 12, Issue 35, R . Measures, 2003/12/18

[Amps] Yaesu FL-2100Z $725 shipped, Lane Zeitler, 2003/12/17

• [Amps] Re: Yaesu FL-2100Z $725 shipped, Brian Carling, 2003/12/17

[Amps] High efficiency broadband designs, Dave Haupt, 2003/12/17

• Re: [Amps] High efficiency broadband designs, R . Measures, 2003/12/17
• Re: [Amps] High efficiency broadband designs, Dave Haupt, 2003/12/18
  • Re: [Amps] High efficiency broadband designs, Brian Moran, 2003/12/18
    • Re: [Amps] High efficiency broadband designs, Steve Thompson, 2003/12/18

[Amps] Re: Amps Digest, Vol 12, Issue 33, gw4dgu, 2003/12/17

• Re: [Amps] Re: Amps Digest, Vol 12, Issue 33, Larry Kayser, 2003/12/30
  • Re: [Amps] Re: Amps Digest, Vol 12, Issue 33, gw4dgu, 2003/12/31
• Re: [Amps] Re: Amps Digest, Vol 12, Issue 33, R . Measures, 2003/12/31

[Amps] Delay Tube, Don Knight, 2003/12/16

• Re: [Amps] Delay Tube, kenw2dtc, 2003/12/16

Re: [Amps] 220VOLT LINE...Redux and ??, ka1xo, 2003/12/15

• Re: [Amps] 220VOLT LINE...Redux and ??, R . Measures, 2003/12/16
  • Re: [Amps] 220VOLT LINE...Redux and ??, jsb, 2003/12/17
• Re: [Amps] 220VOLT LINE...Redux and ??, R . Measures, 2003/12/17
• Re: [Amps] 220VOLT LINE...Redux and ??, Ed Briggs, 2003/12/17
• Re: [Amps] 220VOLT LINE...Redux and ??, R . Measures, 2003/12/17
• Re: [Amps] 220VOLT LINE...Redux and ??, jsb, 2003/12/17
  • Re: [Amps] 220VOLT LINE...Redux and ??, Merv Schweigert, 2003/12/17
    • Re: [Amps] 220VOLT LINE...Redux and ??, jsb, 2003/12/18
    • Re: [Amps] 220VOLT LINE...Redux and ??, Merv Schweigert, 2003/12/18

[Amps] Big Solid State Power Amplifiers, gw4dgu, 2003/12/14

• Re: [Amps] Big Solid State Power Amplifiers, Steve Thompson, 2003/12/16
  • [Amps] Really Big Solid State Power Amplifiers, Larry Kayser, 2003/12/16
    • Re: [Amps] Really Big Solid State Power Amplifiers, Steve Thompson, 2003/12/17
    • Re: [Amps] Really Big Solid State Power Amplifiers, Dr. William J. Schmidt, II, 2003/12/18
    • Re: [Amps] Really Big Solid State Power Amplifiers, Steve Thompson, 2003/12/18
    • Re: [Amps] Really Big Solid State Power Amplifiers, Larry Kayser, 2003/12/30
    • Re: [Amps] Really Big Solid State Power Amplifiers, Ian White, G3SEK, 2003/12/17
    • Re: [Amps] Really Big Solid State Power Amplifiers, Larry Kayser, 2003/12/30
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/15
• Re: [Amps] Big Solid State Power Amplifiers, gw4dgu, 2003/12/16
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/16
• Re: [Amps] Big Solid State Power Amplifiers, gw4dgu, 2003/12/16
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/16
  • Re: [Amps] Big Solid State Power Amplifiers, Steven Grant W4IIV, 2003/12/17
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/17
• Re: [Amps] Big Solid State Power Amplifiers, Steven Grant W4IIV, 2003/12/17
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/17
• Re: [Amps] Big Solid State Power Amplifiers, R . Measures, 2003/12/17
  • Re: [Amps] Big Solid State Power Amplifiers, Michael Tope, 2003/12/18

[Amps], Jim Jarvis, 2003/12/14

• Re: [Amps] pulls, ON5KM, 2003/12/14
• [Amps], k6kwq, 2003/12/14
• Re: [Amps], ka1xo, 2003/12/15
• [Amps], imfswartz, 2003/12/24

[Amps] Bird water load ratings, John T. M. Lyles, 2003/12/13

• RE: [Amps] Bird water load ratings, PAUL HEWITT, 2003/12/14
  • [Amps] 2500 W oil/water load ratings, John T. M. Lyles, 2003/12/16

[Amps] Home Built Amp E-bay, W.F van Wyk, 2003/12/13

• [Amps] ] Home Built Amp E-bay, Richard, 2003/12/14
• [Amps] Wynard's collection, Richard, 2003/12/14

[Amps] AL-1200 Resting Current, Dana Roode, 2003/12/13

• Re: [Amps] AL-1200 Resting Current, R . Measures, 2003/12/14

[Amps] MLA-2500 Relay too loud!, Don Knight, 2003/12/12

• Re: [Amps] MLA-2500 Relay too loud!, Don Knight, 2003/12/13
  • RE: [Amps] MLA-2500 Relay too loud!, PAUL HEWITT, 2003/12/14
• Re: [Amps] MLA-2500 Relay too loud!, R . Measures, 2003/12/14
• Re: [Amps] MLA-2500 Relay too loud!, R . Measures, 2003/12/14

[Amps] Big Solid State Amplifiers, gw4dgu, 2003/12/12

• [Amps] Big Solid State Amplifiers, Rob Atkinson, K5UJ, 2003/12/13

[Amps] ELECTRICAL INSPECTIONS, Gudguyham, 2003/12/12

• Re: [Amps] ELECTRICAL INSPECTIONS, R . Measures, 2003/12/12

[Amps] MLA-2500 question, Don Knight, 2003/12/12

• Re: [Amps] MLA-2500 question, Steve Thompson, 2003/12/12
• Re: [Amps] MLA-2500 question, R . Measures, 2003/12/12
• Re: [Amps] MLA-2500 question, Roger Parsons, 2003/12/12
  • Re: [Amps] MLA-2500 question, Ian White, G3SEK, 2003/12/13
    • Re: [Amps] MLA-2500 question, Steve Thompson, 2003/12/14

[Amps] Input Matching for 8877 on 2m, David Smith, 2003/12/12

• Re: [Amps] Input Matching for 8877 on 2m, Steve Thompson, 2003/12/12

[Amps] Homebrew solid state amps?, Bill Turner, 2003/12/12

• Re: [Amps] Homebrew solid state amps?, Steve Thompson, 2003/12/12
  • Re: [Amps] Homebrew solid state amps?, Stefaan Van Laecken, 2003/12/12
• Re: [Amps] Homebrew solid state amps?, R . Measures, 2003/12/12

[Amps] RE: 3-500Z plate durability..., KD7EFQ, 2003/12/11

• Re: [Amps] RE: 3-500Z plate durability..., R . Measures, 2003/12/12

[Amps] Flashover protection, Conrad G0RUZ, 2003/12/11

• [Amps] Flashover protection, Conrad G0RUZ, 2003/12/12
• Re: [Amps] Flashover protection, R . Measures, 2003/12/12

[Amps] 4pr-1000b,Y448 tubes, Ve6wz_Steve, 2003/12/10

• Re: [Amps] 4pr-1000b,Y448 tubes, Bill Fuqua, 2003/12/11
  • [Amps] Resistors, Saad Mahaini, 2003/12/12
• RE: [Amps] 4pr-1000b,Y448 tubes, Ve6wz_Steve, 2003/12/12
• Re: [Amps] 4pr-1000b,Y448 tubes, R . Measures, 2003/12/12
• RE: [Amps] 4pr-1000b,Y448 tubes, R . Measures, 2003/12/12

[Amps] Home Built Amp, k7fm, 2003/12/10

• [Amps] Bird 8230 Dummy Load, Cliff Bond, 2003/12/12
• [Amps] Home built Amp, Bob Maser, 2003/12/11
  • Re: [Amps] Home built Amp, jsb, 2003/12/12
• Re: [Amps] Home Built Amp, R . Measures, 2003/12/11
• Re: [Amps] Home Built Amp, ka1xo, 2003/12/11
  • Re: [Amps] Home Built Amp, Gary Schafer, 2003/12/12
• Re: [Amps] Home built Amp, R . Measures, 2003/12/12
  • Re: [Amps] Home built Amp, Barrie Smith, 2003/12/13

[Amps] 3-500Z plate durability, jsb, 2003/12/09

• Re: [Amps] 3-500Z plate durability, carl seyersdahl, 2003/12/10
• Re: [Amps] 3-500Z plate durability, Joe Isabella, 2003/12/10
  • Re: [Amps] 3-500Z plate durability, Pete Smith, 2003/12/12
  • Re: [Amps] 3-500Z plate durability, jsb, 2003/12/12
• Re: [Amps] 3-500Z plate durability, jsb, 2003/12/10
  • Re: [Amps] 3-500Z plate durability, Ed Briggs, 2003/12/11
• Re: [Amps] 3-500Z plate durability, ka1xo, 2003/12/10
• Re: [Amps] 3-500Z plate durability, R . Measures, 2003/12/10
• Re: [Amps] 3-500Z plate durability, R . Measures, 2003/12/10
• Re: [Amps] 3-500Z plate durability, Ed Briggs, 2003/12/12
• Re: [Amps] 3-500Z plate durability, R . Measures, 2003/12/12
• Re: [Amps] 3-500Z plate durability, R . Measures, 2003/12/12
• Re: [Amps] 3-500Z plate durability, jsb, 2003/12/12
  • Re: [Amps] 3-500Z plate durability, Ed Briggs, 2003/12/13
• [Amps] 3-500Z plate durability, Rob Atkinson, K5UJ, 2003/12/12
• Re: [Amps] 3-500Z plate durability, R . Measures, 2003/12/12

[Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Gudguyham, 2003/12/09

• Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Gudguyham, 2003/12/09
• Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Gudguyham, 2003/12/09
• [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Rob Atkinson, K5UJ, 2003/12/09
• Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Gudguyham, 2003/12/10
  • Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Don Knight, 2003/12/11
• Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, tongaloa, 2003/12/10
  • Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Ian White, G3SEK, 2003/12/11
    • Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, tongaloa, 2003/12/12
    • Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, Jim Smith, 2003/12/13
    • Re: [Amps] 220VOLT LINE...Redux and ??, Michael Melland, W9WIS, 2003/12/14
    • Re: [Amps] 220VOLT LINE...Redux and ??, Ed Briggs, 2003/12/14
    • [Amps] Buck boost transformer, Gary Schafer, 2003/12/18
• Re: [Amps] 220VOLT LINE...HAMS CAN BE DANGEROUS, COLIN LAMB, 2003/12/12

[Amps] TL-922A 10 Meter Mods, Bob Jones, 2003/12/09

• Re: [Amps] TL-922A 10 Meter Mods, Dan, 2003/12/09

[Amps] Maxwell oil filled capacitors?, A.J Moss, 2003/12/09

• Re: [Amps] Maxwell oil filled capacitors?, Phil Clements, 2003/12/09
• Re: [Amps] Maxwell oil filled capacitors?, R . Measures, 2003/12/09

Re: [Amps] Re: Neutral and ground is in how you use them (was SB-220on 220V), R . Measures, 2003/12/08

• Re: [Amps] Re: Neutral and ground is in how you use them (was SB-220on 220V), Gary Schafer, 2003/12/09
• Re: [Amps] Re: Neutral and ground is in how you use them (was SB-220on 220V), R . Measures, 2003/12/09
• Re: [Amps] Re: Neutral and ground is in how you use them (was SB-220on 220V), R . Measures, 2003/12/09

[Amps] Sockets for GU-84B, Mark Hill, 2003/12/08

• Re: [Amps] Sockets for GU-84B, Dudley Hurry, 2003/12/09
  • Re: [Amps] Sockets for GU-84B, Mark Hill, 2003/12/09

[Amps] arco variable capacitor data, skipp isaham, 2003/12/08

• RE: [Amps] arco variable capacitor data, David Harmon, 2003/12/08
• Re: [Amps] arco variable capacitor data, Radio WC6W, 2003/12/09
  • Re: [Amps] arco variable capacitor data, rk, 2003/12/10

[Amps] RE 220, Ku4uk, 2003/12/08

• Re: [Amps] RE 220, Paul Christensen, Esq., 2003/12/08
  • [Amps] For Sale -- Inductors, Larry Keith, 2003/12/09

[Amps] Re: Neutral and ground is in how you use them (was SB-220 on220V), Dave Haupt, 2003/12/07

• [Amps] Re: Neutral and ground is in how you use them (was SB-220 on220V), R . Measures, 2003/12/07
  • Re: [Amps] Re: Neutral and ground is in how you use them (was SB-220on 220V), Gary Schafer, 2003/12/08
• [Amps] Re: Neutral and ground is in how you use them (was SB-220 on220V), R . Measures, 2003/12/07

[Amps] SB-200 Output Power Too High?, Mike Selfridge, 2003/12/07

• Re: [Amps] SB-200 Output Power Too High?, k6kwq, 2003/12/07
• Re: [Amps] SB-200 Output Power Too High?, wb8jkr, 2003/12/07
  • Re: [Amps] SB-200 Output Power Too High?, John, 2003/12/08
    • [Amps] SB-200 parts?, Kenneth Cechura, 2003/12/08
    • [Amps] SB-200 Mods, Manuel Larsson \"Teknik forumet\", 2003/12/09
• Re: [Amps] SB-200 Output Power Too High?, R . Measures, 2003/12/07

[Amps] series directly heated cathode out to 4 tubes, skipp isaham, 2003/12/07

• Re: [Amps] series directly heated cathode out to 4 tubes, Bill Turner, 2003/12/07
• Re: [Amps] series directly heated cathode out to 4 tubes, R . Measures, 2003/12/07

[Amps] MLA-2500 Problem, Don Knight, 2003/12/07

• [Amps] MLA-2500 Problem, Don Knight, 2003/12/07

[Amps] unun, Dennis Watkins, 2003/12/07

• Re: [Amps] unun, R . Measures, 2003/12/07
• Re: [Amps] unun, R . Measures, 2003/12/07
• Re: [Amps] unun, R . Measures, 2003/12/07

[Amps] Re: SB-220 on 220V, Dave Haupt, 2003/12/06

• Re: [Amps] Re: SB-220 on 220V, Michael Tope, 2003/12/07
• Re: [Amps] Re: SB-220 on 220V, R . Measures, 2003/12/07
• Re: [Amps] Re: SB-220 on 220V, R . Measures, 2003/12/07
• Re: [Amps] Re: SB-220 on 220V, Michael Tope, 2003/12/08

[Amps] Re: 220v service for amps, Joe Isabella, 2003/12/05

• Re: [Amps] Re: 220v service for amps, Gary Schafer, 2003/12/06
  • Re: [Amps] Re: 220v service for amps, Paul Christensen, Esq., 2003/12/07
    • Re: [Amps] Re: 220v service for amps, Joe Isabella, 2003/12/07

[Amps] RE 220 V, Ku4uk, 2003/12/05

• Re: [Amps] RE 220 V, AA6DX, 2003/12/06
• Re: [Amps] RE 220 V, R . Measures, 2003/12/06
  • Re: [Amps] RE 220 V, Bill Coleman, 2003/12/07
• Re: [Amps] RE 220 V, Bill Coleman, 2003/12/07
• Re: [Amps] RE 220 V, R . Measures, 2003/12/07
• Re: [Amps] RE 220 V, R . Measures, 2003/12/07
  • Re: [Amps] RE 220 V, Bill Coleman, 2003/12/07
• Re: [Amps] RE 220 V, R . Measures, 2003/12/07

[Amps] 6lq6 tubes, Flys442, 2003/12/05

• Re: [Amps] 6lq6 tubes, Alek Petkovic, 2003/12/07

[Amps] chokes, carl seyersdahl, 2003/12/05

• RE: [Amps] chokes, David Harmon, 2003/12/05

[Amps] AL80A question, RoadRunner, 2003/12/04

• Re: [Amps] AL80A question, R . Measures, 2003/12/05
• Re: [Amps] AL80A question, R . Measures, 2003/12/05

[Amps] Toroid Plate Transformers, Bill Smith, 2003/12/04

• RE: [Amps] Toroid Plate Transformers, Skram, Helge (MED), 2003/12/05
  • Re: [Amps] Toroid Plate Transformers, Tomm Aldridge, 2003/12/06
• Re: [Amps] Toroid Plate Transformers, R . Measures, 2003/12/05

[Amps] Re: Tubes in parallel, Dave Haupt, 2003/12/04

• Re: [Amps] Re: Tubes in parallel, R . Measures, 2003/12/05

[Amps] GLA-1000 ?, Ed Stallman, 2003/12/04

• Re: [Amps] GLA-1000 ?, k6kwq, 2003/12/04
• Fw: [Amps] GLA-1000 ?, skipp isaham, 2003/12/04

[Amps] tubes in parallel, kenw2dtc, 2003/12/03

• Re: [Amps] tubes in parallel, Vic Rosenthal, 2003/12/04
  • Re: [Amps] tubes in parallel, kenw2dtc, 2003/12/04
• Re: [Amps] tubes in parallel, R . Measures, 2003/12/04
• Re: [Amps] tubes in parallel, R . Measures, 2003/12/04

[Amps] 220V service for amplifier, Jason Buchanan, 2003/12/02

• Re: [Amps] 220V service for amplifier, Brian Moran, 2003/12/03
• Re: [Amps] 220V service for amplifier, Joe Isabella, 2003/12/03
  • Re: [Amps] 220V service for amplifier, Bill Coleman, 2003/12/03
    • Re: [Amps] 220V service for amplifier, Paul Christensen, Esq., 2003/12/04
    • Re: [Amps] 220V service for amplifier, W0UN -- John Brosnahan, 2003/12/04
    • Re: [Amps] 220V service for amplifier, jsb, 2003/12/04
    • RE: [Amps] 220V service for amplifier, Mike McCarthy, W1NR, 2003/12/04
    • RE: [Amps] 220V service for amplifier, Joe Isabella, 2003/12/04
• Re: [Amps] 220V service for amplifier, Ed Briggs, 2003/12/03
• Re: [Amps] 220V service for amplifier, Michael Tope, 2003/12/04
  • Re: [Amps] 220V service for amplifier, Ed Briggs, 2003/12/04
• Re: [Amps] 220V service for amplifier, ka1xo, 2003/12/03
  • Re: [Amps] 220V service for amplifier, Gary Schafer, 2003/12/04
• Re: [Amps] 220V service for amplifier, Ed Briggs, 2003/12/04
• Re: [Amps] 220V service for amplifier, R . Measures, 2003/12/04
  • Re: [Amps] 220V service for amplifier, Ian White, G3SEK, 2003/12/04
• Re: [Amps] 220V service for amplifier, R . Measures, 2003/12/04
  • Re: [Amps] 220V service for amplifier, Steven Grant W4IIV, 2003/12/04
• Re: [Amps] 220V service for amplifier, ka1xo, 2003/12/04
• RE: [Amps] 220V service for amplifier, Joe Isabella, 2003/12/05
• Re: [Amps] 220V service for amplifier, R . Measures, 2003/12/05
• Re: [Amps] 220V service for amplifier, R . Measures, 2003/12/05
  • Re: [Amps] 220V service for amplifier, Ed Briggs, 2003/12/06
    • Re: [Amps] 220V service for amplifier, Bill Turner, 2003/12/07
• RE: [Amps] 220V service for amplifier, R . Measures, 2003/12/05
• RE: [Amps] 220V service for amplifier, R . Measures, 2003/12/06

Re: [Amps] Alpha vs commander?, Dudley Hurry, 2003/12/01

• Re: [Amps] Alpha vs commander?, Steve, 2003/12/03

[Amps] Alpha 77 Filter Cap replacement?, Rich Hallman - N7TR, 2003/12/01

• Re: [Amps] Alpha 77 Filter Cap replacement?, Phil Clements, 2003/12/01
• Re: [Amps] Alpha 77 Filter Cap replacement?, R . Measures, 2003/12/01

[Amps] Looking for help with AL-811 repair, Mark Thompson, 2003/12/01

• Re: [Amps] Looking for help with AL-811 repair, GGLL, 2003/12/01
• [Amps] Looking for help with AL-811 repair, Steve Katz, 2003/12/01
• Re: [Amps] Looking for help with AL-811 repair, R . Measures, 2003/12/01

Re: [Amps] WTB: 2000pF, 3000-5000 V vacuum variable cap., R . Measures, 2003/12/01

• Re: [Amps] WTB: 2000pF, 3000-5000 V vacuum variable cap., Barrie Smith, 2003/12/01

Re: [Amps] Life on the Screen?, R . Measures, 2003/12/01

• Re: [Amps] Life on the Screen?, Radio WC6W, 2003/12/01