Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] Split Stator Capacitor

from [PAUL HEWITT] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] Split Stator Capacitor
From: "PAUL HEWITT" <wd7s@att.net>
Reply-to: wd7s@att.net
Date: Mon, 1 Dec 2003 12:39:53 -0800
List-post: <mailto:amps@contesting.com> 
Greetings
The custom built split stator capacitor I used in the 8877 auto-tune
amplifier shown on my website now has a part number at Cardwell Condenser.

Cardwell Part # 154-16-17
max/min capacitance, 47/9, 163/20
4500volts

This cap makes tank design a little easier (lower Qs) at higher plate load
impedances.

Cheers, Paul


PAUL HEWITT
WD7S PRODUCTIONS
QRO HOMEBREW COMPONENTS
http://wd7s.home.att.net

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Split Stator Capacitor, PAUL HEWITT <=
Previous by Date:  [Amps] Thordarson Transformer in Mt. Carmel, Illinois, Bill Smith
Next by Date:  [Amps] 220V service for amplifier, Jason Buchanan
Previous by Thread:  [Amps] Thordarson Transformer in Mt. Carmel, Illinois, Bill Smith
Next by Thread:  [Amps] 220V service for amplifier, Jason Buchanan
Indexes:  [Date] [Thread] [Top] [All Lists]