Amps Mailing List (date)
July 31, 2006
- Re: [Amps] Question on an amp., Bill L. Fuqua, 23:51
- Re: [Amps] Ameritron Amps, R L Measures, 22:16
- Re: [Amps] Ameritron Amps, R L Measures, 22:16
- [Amps] Question on an amp., Will Matney, 22:12
- Re: [Amps] GS35 anode cooler, Will Matney, 22:12
- Re: [Amps] Ameritron Amps, Will Matney, 22:12
- Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 17:21
- Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 16:41
- [Amps] SELL: Misc. Amplifier Parts, w2cqm@juno.com, 16:06
- Re: [Amps] Plasma Thermo HFS 3000D, Phil Clements, 15:07
- [Amps] Glass failures Chinese tubes, Tom W8JI, 13:53
- Re: [Amps] Ameritron Amps, Steve Thompson, 13:38
- Re: [Amps] Ameritron Amps, Steve Thompson, 13:35
- Re: [Amps] Glass melting, f, and D-factor, Steve Thompson, 13:14
- [Amps] GS35 anode cooler, Steve Thompson, 13:05
- Re: [Amps] Plasma Thermo HFS 3000D, Larry Carman, 11:54
- Re: [Amps] Ameritron Amps, Tom W8JI, 11:27
- Re: [Amps] MTBF - was Ameritron Amps, Tom W8JI, 11:21
- Re: [Amps] Ameritron Amps, Peter Chadwick, 11:09
- Re: [Amps] MTBF - was Ameritron Amps, Peter Chadwick, 10:55
- Re: [Amps] Ameritron Amps, R L Measures, 10:00
- Re: [Amps] Ameritron Amps, R L Measures, 10:00
- Re: [Amps] Glass melting, f, and D-factor, R L Measures, 10:00
- Re: [Amps] Ameritron Amps, mike kendall, 09:46
- Re: [Amps] MTBF - was Ameritron Amps, mike kendall, 09:28
- Re: [Amps] Ameritron Amps, k7fm, 09:09
- Re: [Amps] Ameritron Amps, mike kendall, 08:38
- Re: [Amps] MTBF - was Ameritron Amps, Bob Maser, 08:17
- Re: [Amps] MTBF - was Ameritron Amps, Peter Chadwick, 08:04
- [Amps] RE Tr : Re: Ameritron Amps OOPS, DEHAYS Dominique, 07:52
- [Amps] Tr : Re: Ameritron Amps, DEHAYS Dominique, 07:36
- Re: [Amps] Ameritron Amps, pegasus, 06:47
- Re: [Amps] Pre-heating of tubes, Tom W8JI, 06:00
- Re: [Amps] Ameritron Amps, Tom W8JI, 05:42
- Re: [Amps] Ameritron Amps, Steve Thompson, 04:26
- Re: [Amps] Ameritron Amps, Steve Thompson, 04:01
- Re: [Amps] Ameritron Amps, Phil Clements, 03:12
- Re: [Amps] conversion scale from dbu to microvolts, Peter Chadwick, 02:39
- Re: [Amps] Pre-heating of tubes, Peter Chadwick, 02:12
- Re: [Amps] Ameritron Amps, R L Measures, 00:19
- Re: [Amps] Ameritron Amps, R L Measures, 00:19
- Re: [Amps] Ameritron Amps, R L Measures, 00:19
July 30, 2006
- Re: [Amps] Ameritron Amps, mike kendall, 23:53
- [Amps] re Hammond hf amplifiers, Fern Rivard, 22:57
- Re: [Amps] Ameritron Amps, Bill Turner, 22:01
- Re: [Amps] Ameritron Amps, Doug Renwick, 21:31
- Re: [Amps] Ameritron Amps, Doug Renwick, 21:31
- Re: [Amps] Ameritron Amps, Mike Schatzberg, 21:29
- Re: [Amps] Ameritron Amps, Gary Smith, 18:48
- Re: [Amps] 1.5kw low pass filters, Gary Smith, 18:44
- Re: [Amps] Ameritron Amps, Steve Thompson, 17:03
- Re: [Amps] Ameritron Amps, Tom W8JI, 16:25
- Re: [Amps] conversion scale from dbu to microvolts, Jim Brown, 16:24
- Re: [Amps] Tube Prices, PA3DUV, 15:26
- Re: [Amps] Ameritron Amps, Steve Thompson, 15:10
- Re: [Amps] Tube Prices, R L Measures, 14:48
- Re: [Amps] Ameritron Amps, R L Measures, 14:48
- Re: [Amps] Tube Prices, Will Matney, 14:45
- Re: [Amps] Pre-heating of tubes, Will Matney, 14:45
- Re: [Amps] Tube Prices, Bill Turner, 14:06
- [Amps] Mirage/KLM HF-10080 Information, Hank Lonberg, 13:49
- Re: [Amps] Tube Prices, Harold Mandel, 13:40
- Re: [Amps] Ameritron Amps, Fern Rivard, 13:15
- Re: [Amps] 160m RTTY, Peter Chadwick, 13:14
- [Amps] Tube Prices, Tom W8JI, 12:49
- Re: [Amps] Ameritron Amps, Ed Swynar, 12:32
- Re: [Amps] Ameritron Amps, Bill Turner, 12:12
- Re: [Amps] Ameritron Amps, Fern Rivard, 11:58
- Re: [Amps] Ameritron Amps, Gudguyham, 11:26
- Re: [Amps] Ameritron Amps, Gudguyham, 11:22
- Re: [Amps] Ameritron Amps, Tom W8JI, 11:19
- Re: [Amps] Ameritron Amps, Bill Turner, 11:13
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 11:00
- Re: [Amps] 160m RTTY, Roger D Johnson, 10:44
- [Amps] HV Bypass Caps, George Vlahos, 10:35
- Re: [Amps] 160m RTTY, Tom W8JI, 10:22
- Re: [Amps] Practical Transformer Design Handbook by Eric Lowdon, Mike Sawyer, 10:21
- Re: [Amps] Weak Amperex 3-500Z, R L Measures, 10:16
- Re: [Amps] plexiglas isolation in coils, R L Measures, 10:15
- [Amps] Plasma Therm HFS 3000D, Will Matney, 10:12
- [Amps] Practical Transformer Design Handbook by Eric Lowdon, Will Matney, 10:12
- Re: [Amps] Ameritron Amps, Will Matney, 10:12
- Re: [Amps] Ameritron Amps, Will Matney, 10:11
- Re: [Amps] Vacuum, Will Matney, 10:11
- Re: [Amps] Ameritron Amps, Ed Swynar, 09:57
- Re: [Amps] 160m RTTY, David G4FTC, 09:46
- Re: [Amps] Ameritron Amps, Joe Subich, W4TV, 09:04
- Re: [Amps] Ameritron Amps, mike kendall, 08:38
- Re: [Amps] 160m RTTY, David G4FTC, 08:15
- Re: [Amps] Ameritron Amps, Mike Schatzberg, 08:12
- Re: [Amps] Ameritron Amps, Peter Chadwick, 07:23
- [Amps] 160m RTTY, Peter Chadwick, 07:16
- Re: [Amps] Pre-heating of tubes, Peter Chadwick, 06:56
- Re: [Amps] Ameritron Amps, Gudguyham, 06:54
- Re: [Amps] Pre-heating of tubes, Peter Chadwick, 06:49
- Re: [Amps] Ameritron Amps, Peter Chadwick, 06:36
- Re: [Amps] Ameritron Amps, Peter Chadwick, 05:53
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 05:44
- [Amps] RE : Ameritron Amps, hermans, 05:35
- [Amps] Mouser or Digi-Key BOM for Tetrode Boards?, Ian White GM3SEK, 03:31
- [Amps] 1.5kw low pass filters, mike kendall, 02:56
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 01:12
July 29, 2006
- Re: [Amps] Ameritron Amps, Michael Tope, 23:19
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 23:15
- Re: [Amps] Ameritron Amps, Tom W8JI, 23:05
- Re: [Amps] Ameritron Amps, John Vickers, 22:44
- Re: [Amps] Ameritron Amps, k7fm, 22:36
- Re: [Amps] Ameritron Amps, John Vickers, 22:31
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 22:24
- Re: [Amps] Ameritron Amps, Bill Turner, 22:19
- Re: [Amps] Ameritron Amps, mike kendall, 22:16
- Re: [Amps] Ameritron Amps, John Vickers, 22:10
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 21:38
- Re: [Amps] Ameritron Amps, Bill Turner, 21:37
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 21:34
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 21:31
- Re: [Amps] Ameritron Amps, John Vickers, 21:22
- Re: [Amps] Ameritron Amps, Bill Turner, 21:18
- Re: [Amps] Ameritron Amps, Bill Turner, 21:15
- Re: [Amps] Ameritron Amps, Bill Turner, 21:09
- Re: [Amps] Ameritron Amps, Gudguyham, 20:58
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 20:58
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 20:54
- Re: [Amps] Arc distance, Tom W8JI, 19:01
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 18:49
- Re: [Amps] plexiglas isolation in coils, W7RY, 18:26
- Re: [Amps] Pre-heating of tubes, Ian White GM3SEK, 18:13
- Re: [Amps] Ameritron Amps, W7RY, 18:10
- Re: [Amps] Ameritron Amps, Steve Thompson, 17:43
- Re: [Amps] Arc distance, Ian White GM3SEK, 17:28
- Re: [Amps] Pre-heating of tubes, R L Measures, 15:49
- Re: [Amps] Arc distance, Will Matney, 15:44
- Re: [Amps] Vacuum, Will Matney, 15:44
- Re: [Amps] Arc distance, Will Matney, 15:44
- Re: [Amps] Ameritron Amps, Will Matney, 15:44
- Re: [Amps] Pre-heating of tubes, Will Matney, 15:44
- Re: [Amps] Vacuum, Will Matney, 15:44
- Re: [Amps] Vacuum, Will Matney, 15:43
- Re: [Amps] Vacuum, Will Matney, 15:43
- Re: [Amps] Vacuum, Will Matney, 15:43
- Re: [Amps] Ameritron Amps, Tom W8JI, 15:12
- Re: [Amps] Ameritron Amps, Bert Almemo, 15:10
- [Amps] Cap Specs (Ameritron), john, 15:02
- Re: [Amps] Ameritron Amps, mike kendall, 13:53
- Re: [Amps] Ameritron Amps, Bert Almemo, 13:25
- [Amps] 4CX1600B, Larry, 13:04
- Re: [Amps] Ameritron Amps, mike kendall, 13:02
- Re: [Amps] Ameritron Amps, mike kendall, 12:52
- Re: [Amps] Arc distance, Ian White GM3SEK, 12:30
- Re: [Amps] conversion scale from dbu to microvolts, Karl-Arne Markström, 12:29
- Re: [Amps] Ameritron Amps, harolddcraft, 12:25
- Re: [Amps] Ameritron Amps, Mike Sawyer, 12:19
- [Amps] HP 410B VTVM, David C. Hallam, 11:43
- [Amps] Alpha power down question, Martin Sole, 11:38
- Re: [Amps] fils show diff brightnesses, Roy Koeppe, 11:24
- Re: [Amps] conversion scale from dbu to microvolts, Jim Brown, 11:20
- Re: [Amps] Arc distance and plasma, PA3DUV, 11:15
- Re: [Amps] Fw: Ameritron Amps, Michael Tope, 11:12
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 11:09
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 11:04
- Re: [Amps] Ameritron Amps, kenw2dtc, 10:46
- Re: [Amps] conversion scale from dbu to microvolts, Martin Sole, 10:31
- [Amps] WTB: Henry Console, john, 10:31
- Re: [Amps] conversion scale from dbu to microvolts, Fern Rivard, 10:25
- Re: [Amps] conversion scale from dbu to microvolts, Karl-Arne Markström, 10:12
- [Amps] Fw: Ameritron Amps, ec1cwg, 10:09
- [Amps] Filaments show different brightness, Pete Smith, 09:59
- Re: [Amps] Ameritron Amps, Michael Tope, 09:27
- Re: [Amps] conversion scale from dbu to microvolts, Joe DiPietro, N2UF, 09:22
- Re: [Amps] Ameritron Amps, mike kendall, 09:21
- [Amps] Fwd: Re: Ameritron Amps, mike kendall, 09:14
- Re: [Amps] Arc distance, Ian White GM3SEK, 09:13
- [Amps] conversion scale from dbu to microvolts, Fern Rivard, 09:07
- Re: [Amps] Ameritron Amps, k7fm, 09:01
- Re: [Amps] Ameritron Amps, Joe Subich, W4TV, 08:49
- Re: [Amps] Ameritron Amps, Gudguyham, 08:27
- Re: [Amps] Ameritron Amps, Gudguyham, 08:23
- Re: [Amps] Ameritron Amps, kenw2dtc, 05:43
- Re: [Amps] Arc distance - see for youself!, Dr. David Kirkby, 05:22
- Re: [Amps] Arc distance - see for youself!, Dr. David Kirkby, 05:17
- Re: [Amps] Ameritron Amps, mike kendall, 02:46
- Re: [Amps] Ameritron Amps, Scott Manthe, 02:11
- [Amps] Ameritron Amps, Bob Maser, 00:13
July 28, 2006
- Re: [Amps] Pre-heating of tubes, GGLL, 23:49
- Re: [Amps] Arc distance and plasma, Tom W8JI, 23:20
- Re: [Amps] plexiglas isolation in coils, R L Measures, 23:00
- Re: [Amps] Weak Amperex 3-500Z, R L Measures, 23:00
- Re: [Amps] Arc distance, R L Measures, 23:00
- Re: [Amps] Arc distance, Will Matney, 22:55
- Re: [Amps] Arc distance, Will Matney, 22:55
- Re: [Amps] Arc distance and plasma, Will Matney, 22:54
- Re: [Amps] Arc distance and plasma, Will Matney, 22:54
- Re: [Amps] Arc distance, Will Matney, 22:54
- Re: [Amps] Arc distance and plasma, Tom W8JI, 21:01
- Re: [Amps] Arc distance and plasma, Steven Cook, 19:35
- Re: [Amps] Arc distance, Tom W8JI, 18:51
- [Amps] AM 1180/GRC 50-100 mc amp, Tom WA9WSJ, 17:43
- [Amps] Good Source for Sweep tubes, Dave Meitzen, 16:59
- Re: [Amps] Arc distance, Dave Haupt, 16:19
- Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 15:32
- Re: [Amps] Arc distance, Ian White GM3SEK, 15:32
- Re: [Amps] plexiglas isolation in coils, John Vickers, 15:21
- Re: [Amps] plexiglas isolation in coils, John Vickers, 14:43
- [Amps] plasma inside 3-500Z TSPA, John T. M. Lyles, 14:12
- Re: [Amps] plexiglas isolation in coils, Colin Lamb, 13:56
- Re: [Amps] Arc distance, Tom W8JI, 13:52
- Re: [Amps] plexiglas isolation in coils, Vic K2VCO, 13:42
- Re: [Amps] plexiglas isolation in coils, kenw2dtc, 13:41
- [Amps] New LDMOS transistors for power TSPA, John T. M. Lyles, 13:19
- Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 13:18
- Re: [Amps] plexiglas isolation in coils, RICHARD GEORGE, 13:09
- Re: [Amps] plexiglas isolation in coils, Keith Dutson, 13:03
- Re: [Amps] plexiglas isolation in coils, Bob Maser, 12:41
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 12:12
- Re: [Amps] plexiglas isolation in coils, Bill Turner, 11:52
- Re: [Amps] Weak Amperex 3-500Z, Peter Chadwick, 11:47
- Re: [Amps] Weak Amperex 3-500Z, John Vickers, 11:32
- Re: [Amps] Arc distance and plasma, Bill Fuqua, 11:00
- [Amps] Arc distance and plasma, Tom W8JI, 10:51
- Re: [Amps] Flash arcs, Jim Tonne, 10:31
- [Amps] Weak Amperex 3-500Z, Keith Dutson, 10:18
- Re: [Amps] Arc distance, Larry Carman, 09:23
- [Amps] Arc distance, Tom W8JI, 07:53
- [Amps] Tubes 201, Peter Chadwick, 06:56
- [Amps] valves v. tubes - was flash arcs, Peter Chadwick, 04:47
- Re: [Amps] Flash arcs, Steve Thompson, 02:48
July 27, 2006
- Re: [Amps] Flash arcs, Martin Sole, 23:41
- [Amps] Plexiglass coil forms, Nelson Wittstock, 23:16
- Re: [Amps] Flash arcs, Mike K6BR, 22:04
- Re: [Amps] arc to grid basket TSPA, Will Matney, 22:00
- Re: [Amps] Flash arcs, Will Matney, 22:00
- Re: [Amps] arc to grid basket TSPA, R L Measures, 21:58
- Re: [Amps] Flash arcs, Peter Chadwick, 14:51
- Re: [Amps] arc to grid basket TSPA, Tom W8JI, 13:40
- [Amps] arc to grid basket TSPA, John T. M. Lyles, 13:17
- Re: [Amps] Flash arcs, Jim Brown, 11:02
- Re: [Amps] plexiglas isolation in coils, R L Measures, 10:34
- Re: [Amps] plexiglas isolation in coils, R L Measures, 10:33
- Re: [Amps] W3NQN High power RF Harmonic filters, Jim Tonne, 10:00
- [Amps] SELL: Heath SB200 RF Parts, w2cqm@juno.com, 08:15
- [Amps] Flash arcs, Peter Chadwick, 04:41
- Re: [Amps] plexiglas isolation in coils, Ian White GM3SEK, 04:09
- Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 03:41
- [Amps] W3NQN High power RF Harmonic filters, Craig, 02:35
- [Amps] W3NQN High power RF Harmonic filters, Dick, 01:02
- Re: [Amps] plexiglas isolation in coils, Dick, 00:58
- Re: [Amps] flash arcs, Michael Tope, 00:07
July 26, 2006
- Re: [Amps] flash arcs, Tom W8JI, 23:13
- Re: [Amps] flash arcs, Jim Brown, 23:00
- Re: [Amps] Russian microwave cermic-metal tube needed, mike kendall, 22:59
- Re: [Amps] flash arcs, R L Measures, 22:07
- [Amps] Apology to Will and the list, Tom W8JI, 21:25
- [Amps] Make correct, Hsu, 20:27
- Re: [Amps] TL-922 question, W2RU - Bud Hippisley, 20:14
- [Amps] (no subject), CAA357, 19:59
- [Amps] Fw: setting the grid adrift, Hsu, 19:51
- Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 19:43
- Re: [Amps] Russian microwave cermic-metal tube needed, Hsu, 19:41
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 18:22
- Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 17:46
- Re: [Amps] setting the grid adrift, Mike Sawyer, 17:41
- Re: [Amps] 3-500Z to 3CX1200D7, Bob Maser, 17:24
- [Amps] 3-500Z to 3CX1200D7, PlanerGuy, 17:14
- Re: [Amps] plexiglas isolation in coils, PA3DUV, 17:07
- Re: [Amps] plexiglas isolation in coils, Tom W8JI, 17:05
- Re: [Amps] TL-922 question, Peter Voelpel, 16:42
- Re: [Amps] plexiglas isolation in coils, Peter Voelpel, 16:33
- Re: [Amps] setting the grid adrift -- ok done here, Chris Howard, 16:24
- [Amps] TL-922 question, Vic K2VCO, 16:21
- Re: [Amps] setting the grid adrift, Will Matney, 16:12
- [Amps] plexiglas isolation in coils, Dick, 16:11
- Re: [Amps] setting the grid adrift, Will Matney, 15:59
- Re: [Amps] setting the grid adrift, Jim Tonne, 15:50
- Re: [Amps] setting the grid adrift, RICHARD GEORGE, 15:49
- Re: [Amps] setting the grid adrift, Will Matney, 15:44
- Re: [Amps] Amps Digest, Vol 43, Issue 138, Bill Turner, 13:21
- Re: [Amps] Russian microwave cermic-metal tube needed, Paul Whatton, 11:38
- Re: [Amps] setting the grid adrift, m.ford, 11:28
- Re: [Amps] setting the grid adrift, David C. Hallam, 10:27
- Re: [Amps] setting the grid adrift, Theo Bellamy, 10:26
- Re: [Amps] setting the grid adrift, Peter Chadwick, 10:18
- Re: [Amps] setting the grid adrift, Osten B Magnusson, 09:53
- Re: [Amps] setting the grid adrift, Mike Schatzberg, 09:51
- Re: [Amps] Russian microwave cermic-metal tube needed, mike kendall, 09:46
- Re: [Amps] setting the grid adrift, Mike Schatzberg, 09:46
- Re: [Amps] setting the grid adrift, Peter Chadwick, 09:30
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Joe Subich, W4TV, 09:08
- Re: [Amps] PIN diode mods, Jan Erik Holm, 09:07
- Re: [Amps] setting the grid adrift, R L Measures, 08:31
- Re: [Amps] setting the grid adrift, R L Measures, 08:31
- [Amps] Russian microwave cermic-metal tube needed, Hsu, 08:30
- Re: [Amps] PIN diode mods, Paul Christensen, 08:13
- Re: [Amps] PIN diode mods, Jan Erik Holm, 08:04
- Re: [Amps] PIN diode mods, Jan Erik Holm, 07:39
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 07:33
- Re: [Amps] PIN diode mods, Paul Christensen, 07:30
- Re: [Amps] PIN diode mods, Peter Voelpel, 07:26
- Re: [Amps] PIN diode mods, Jan Erik Holm, 07:23
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Karl-Arne Markström, 07:21
- Re: [Amps] flash arcs, Tom W8JI, 07:12
- Re: [Amps] setting the grid adrift, Tom W8JI, 07:10
- Re: [Amps] PIN diode mods, Paul Christensen, 07:06
- [Amps] flash arcs, Peter Chadwick, 06:55
- Re: [Amps] PIN diode mods, Tom W8JI, 06:52
- Re: [Amps] PIN diode mods, Jan Erik Holm, 06:48
- [Amps] PIN diode mods, Craig, 06:30
- Re: [Amps] setting the grid adrift, Tom W8JI, 06:14
- Re: [Amps] PIN diode mods, Peter Chadwick, 04:41
- Re: [Amps] MOSFET biasing, Peter Chadwick, 04:37
- Re: [Amps] setting the grid adrift, Peter Chadwick, 04:23
- Re: [Amps] PIN diode mods, Jan Erik Holm, 03:40
- Re: [Amps] MOSFET biasing, Steve Thompson, 02:35
July 25, 2006
- Re: [Amps] setting the grid adrift, Will Matney, 23:41
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 23:10
- Re: [Amps] setting the grid adrift, Chris Howard, 22:55
- Re: [Amps] Amps Digest, Vol 43, Issue 134, S. J. Blackwell, 22:13
- Re: [Amps] PIN diode mods, Rob & Terri Sherwood, 22:07
- Re: [Amps] setting the grid adrift, Chris Howard, 22:01
- Re: [Amps] MOSFET biasing, Tom W8JI, 21:44
- [Amps] PIN diode mods, Tom W8JI, 21:34
- Re: [Amps] setting the grid adrift, Tom W8JI, 21:27
- [Amps] MOSFET biasing, Danny Pease, 19:36
- Re: [Amps] setting the grid adrift, Peter Voelpel, 19:05
- Re: [Amps] AMPs without HV transformer(make correct and other), carl s., 18:42
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 18:29
- Re: [Amps] setting the grid adrift, Will Matney, 18:29
- Re: [Amps] AMPs without HV transformer(make correct and other), Hsu, 18:26
- Re: [Amps] setting the grid adrift, Peter Voelpel, 18:06
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 17:34
- Re: [Amps] setting the grid adrift, Chris Howard, 17:33
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 17:25
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 17:23
- Re: [Amps] SRF7053 et al, Will Matney, 17:18
- Re: [Amps] Amps Digest, Vol 43, Issue 138, Will Matney, 16:46
- Re: [Amps] Amps Digest, Vol 43, Issue 138, Borislav Trifonov, 16:38
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, PA3DUV, 16:38
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Frank Goenninger, 16:32
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 16:26
- Re: [Amps] setting the grid adrift, Will Matney, 16:24
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 16:21
- Re: [Amps] setting the grid adrift, Tom W8JI, 15:49
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 15:38
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 15:28
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 15:24
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 15:15
- Re: [Amps] setting the grid adrift, Will Matney, 15:09
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 14:52
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Steve Thompson, 14:50
- Re: [Amps] setting the grid adrift, Tom W8JI, 14:45
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 14:40
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 14:32
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 14:23
- Re: [Amps] setting the grid adrift, Peter Voelpel, 14:19
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 14:17
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 14:16
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 14:05
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Peter Voelpel, 14:04
- Re: [Amps] setting the grid adrift, Chris Howard, 14:02
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 13:57
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 13:52
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Will Matney, 13:40
- Re: [Amps] setting the grid adrift, Will Matney, 13:36
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Bill Turner, 13:32
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Dick Hanson, 12:51
- Re: [Amps] setting the grid adrift, Tom W8JI, 12:27
- [Amps] Tube textbooks TSPA, John T. M. Lyles, 11:53
- Re: [Amps] 3-500Z convertion, Steve Thompson, 11:49
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, R L Measures, 11:41
- [Amps] setting the grid adrift, Chris Howard, 11:27
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 11:21
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 11:18
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 10:41
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Phil Clements, 10:35
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Phil Clements, 10:31
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 10:18
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, John Vickers, 10:01
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 08:39
- Re: [Amps] Amps Digest, Vol 43, Issue 134, Borislav Trifonov, 08:23
- Re: [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, GGLL, 08:10
- [Amps] AMP without HV transceiver, Hsu, 06:45
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 06:43
- Re: [Amps] Looking for info: SRF7053 device, Peter Chadwick, 06:22
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Karl-Arne Markström, 06:16
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 06:15
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 06:09
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 05:42
- Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 05:22
- Re: [Amps] 3-500Z convertion, Karl-Arne Markström, 05:17
- Re: [Amps] 3-500Z convertion, Peter Chadwick, 04:59
- [Amps] Effect of Gas Upon Tube Characteristics, Will Matney, 00:33
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 00:04
- Re: [Amps] Tube 201, Will Matney, 00:02
July 24, 2006
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Keith Dutson, 23:29
- Re: [Amps] Tube 201, John Vickers, 23:16
- [Amps] RS1002A and 7527, Hsu, 22:36
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 22:33
- [Amps] RS1002A and 7527, Hsu, 22:19
- [Amps] Henry 2K4 Plate caps, Charles Wooten NF4A, 22:17
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Keith Dutson, 22:15
- [Amps] Tube 201, Will Matney, 22:02
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 21:59
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 21:54
- [Amps] Fw: "Tubes 201" - How Vacuum Tubes Really Work, John Vickers, 21:33
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 21:24
- Re: [Amps] Zirconium, Will Matney, 20:38
- Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 20:24
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 20:10
- [Amps] Zirconium, Tom W8JI, 20:06
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 19:49
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 19:37
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 19:24
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 19:23
- Re: [Amps] Looking for info: SRF7053 device, Steve Thompson, 18:21
- Re: [Amps] re; The maximum amount of 811As and 572Bs in parallel, Hsu, 18:14
- Re: [Amps] the radio handbook by mr orr w6sai and amps, R L Measures, 18:04
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 18:04
- Re: [Amps]The maximum amount ?of 811As and 572Bs in parallel, R L Measures, 18:04
- Re: [Amps] re; The maximum amount of 811As and 572Bs in parallel, R L Measures, 18:04
- Re: [Amps] Pi network tuning, R L Measures, 18:03
- Re: [Amps] 3-500Z convertion, R L Measures, 18:03
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, R L Measures, 18:03
- Re: [Amps] Looking for info: SRF7053 device, Steve Thompson, 18:02
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 17:46
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Bill Fuqua, 17:06
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Gary Smith, 16:59
- [Amps] Eimac 4-1000A Would like to sell but..., OTAKEBI, 16:27
- Re: [Amps] Looking for info: SRF7053 device, Will Matney, 16:25
- Re: [Amps] Looking for info: SRF7053 device, Will Matney, 15:15
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 15:10
- [Amps] Looking for info: SRF7053 device, John D'Ausilio, 14:59
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Peter Voelpel, 13:55
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 12:47
- Re: [Amps] grid fuses, Will Matney, 12:30
- Re: [Amps] 3-500Z convertion, Mike Schatzberg, 11:10
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 11:06
- Re: [Amps] grid fuses, Chris Howard, 11:05
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 10:59
- Re: [Amps] Pi network tuning, Tom W8JI, 10:52
- Re: [Amps] grid fuses, Tom W8JI, 10:44
- Re: [Amps] 3-500Z convertion, Bob Nielsen, 10:40
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 10:34
- Re: [Amps] grid fuses, Chris Howard, 10:31
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Michael Tope, 09:41
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 09:19
- Re: [Amps] 3-500Z convertion, Mike Schatzberg, 09:18
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Bill Fuqua, 08:54
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, S. J. Blackwell, 08:32
- [Amps] the radio handbook by mr orr w6sai and amps, robert briggs, 08:05
- Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 07:54
- Re: [Amps] Pi network tuning, Tom W8JI, 07:18
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 06:33
- Re: [Amps] the radio handbook by mr orr w6sai and amps, Tom W8JI, 06:12
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Steve Thompson, 02:40
- Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 01:58
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 01:57
- Re: [Amps] 3-500Z convertion, Peter Chadwick, 01:56
- Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 01:45
- Re: [Amps] [??????????????]Re: [??????????????]Re: 3-500Z convertion, Jan Erik Holm, 01:44
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 01:40
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 01:22
- Re: [Amps]The maximum amount Âof 811As and 572Bs in parallel, Peter Chadwick, 01:22
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 01:01
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 00:59
- Re: [Amps] grid fuses, R L Measures, 00:58
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, R L Measures, 00:58
- Re: [Amps] Recommended 3-500's, R L Measures, 00:58
- Re: [Amps] 3-500Z convertion, R L Measures, 00:58
- Re: [Amps] 3-500Z convertion, R L Measures, 00:58
- Re: [Amps] 572B grid, Peter Chadwick, 00:35
- [Amps] Custom metal work, Bill Turner, 00:20
July 23, 2006
- [Amps] the radio handbook by mr orr w6sai and amps, Hsu, 23:38
- [Amps] the radio handbook by mr orr w6sai and amps, Ian swain, 23:14
- Re: [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 22:34
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Chris Howard, 22:18
- Re: [Amps] Pi network tuning, Tom W8JI, 22:10
- [Amps] Pi network tuning, Mike(W5UC) & Kathy(K5MWH), 21:38
- [Amps] re; The maximum amount of 811As and 572Bs in parallel, Hsu, 21:29
- [Amps] Fw: 3cx3000A7 driver, m.ford, 19:44
- Re: [Amps] 3cx3000A7 driver, Mark Beckwith, 19:24
- [Amps] cheap glass vacuum tube, Hsu, 17:50
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 16:50
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 16:48
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, wc6w@juno.com, 16:34
- Re: [Amps] 3cx3000A7 driver, Chris Pedder, 16:12
- Re: [Amps] 3cx3000A7 driver, Mark Beckwith, 15:45
- Re: [Amps] Caustic soda, William Stehl, 15:31
- Re: [Amps] 3cx3000A7 driver, k7fm, 15:31
- Re: [Amps] 572B grid, crawfish, 15:27
- Re: [Amps] 3cx3000A7 driver, crawfish, 15:24
- Re: [Amps] 3cx3000A7 driver, Barrie Smith, 15:18
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Tom W8JI, 15:18
- Re: [Amps] 3cx3000A7 driver, k7fm, 15:08
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Will Matney, 14:58
- Re: [Amps] 3cx3000A7 driver, Jan Erik Holm, 14:51
- Re: [Amps] 572B grid, Jan Erik Holm, 14:46
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, crawfish, 14:41
- Re: [Amps] 3cx3000A7 driver, crawfish, 14:41
- Re: [Amps] 572B grid, Jan Erik Holm, 14:37
- Re: [Amps] 572B grid, Vic K2VCO, 14:15
- Re: [Amps] 572B grid, John Vickers, 14:15
- Re: [Amps] 572B grid, kenw2dtc, 14:02
- [Amps] Ameritron 1200, dan r goddard, 14:00
- Re: [Amps] 572B grid, Vic K2VCO, 13:49
- Re: [Amps] 572B grid, Vic K2VCO, 13:44
- [Amps] Caustic soda, Barrie Smith, 13:38
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 13:09
- Re: [Amps] 572B grid, kenw2dtc, 13:07
- Re: [Amps] [??????????????]Re: 3-500Z convertion, Jan Erik Holm, 12:47
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 12:46
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 12:38
- [Amps] cheap glass vacuum tube, Hsu, 12:30
- Re: [Amps] grid fuses, Tom W8JI, 12:24
- Re: [Amps] 3-500Z convertion, Hsu, 12:23
- [Amps] 572B grid, Tom W8JI, 12:19
- Re: [Amps] The maximum amount of 811As and 572Bs in parallel, Hsu, 12:15
- Re: [Amps] 3-500Z convertion, Hsu, 12:06
- Re: [Amps] [??????????????]Re: 3-500Z convertion, Hsu, 12:05
- Re: [Amps] grid fuses, Peter Chadwick, 11:21
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 11:10
- Re: [Amps] 3-500Z convertion, Peter Chadwick, 10:59
- Re: [Amps] 3-500Z convertion, Mike Schatzberg, 10:56
- Re: [Amps] grid fuses, carl s., 10:30
- Re: [Amps] 3-500Z convertion, Jan Erik Holm, 10:15
- Re: [Amps] Recommended 3-500's, Joe Isabella, 10:06
- Re: [Amps] (Off Topic) German HF/VHF rig, Frank Goenninger, 08:47
- Re: [Amps] 3cx3000A7 driver, Frank Goenninger, 08:33
- Re: [Amps] 3-500Z convertion, Hsu, 08:14
- Re: [Amps] grid fuses, R L Measures, 07:27
- Re: [Amps] AMPS, R L Measures, 07:27
- Re: [Amps] 3-500Z convertion, Peter Chadwick, 07:14
- [Amps] The maximum amount of 811As and 572Bs in parallel, Hsu, 07:05
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Peter Chadwick, 07:05
- [Amps] 3-500Z convertion, Hsu, 06:54
- Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 06:51
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Tom W8JI, 05:59
- Re: [Amps] 3cx3000A7 driver, Karl-Arne Markström, 05:34
- Re: [Amps] making aluminum heat sinks black, Peter Chadwick, 03:57
- Re: [Amps] making sinks black, Peter Chadwick, 03:36
- Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 03:15
- Re: [Amps] making sinks black, Steve Thompson, 03:11
- Re: [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 02:26
- [Amps] "Tubes 201" - How Vacuum Tubes Really Work, Will Matney, 02:08
- [Amps] Recommended 3-500's, Martin Sole, 01:37
- Re: [Amps] grid fuses, Will Matney, 00:56
- [Amps] grid fuse and contact potential bias link, Tom W8JI, 00:49
July 22, 2006
- Re: [Amps] Amps Digest, Vol 43, Issue 95, Administrator, 23:28
- [Amps] Clipperton L Parts For Sale, Jeff Weinberg W8CQ, 23:20
- Re: [Amps] grid fuses, Tom W8JI, 23:05
- Re: [Amps] Amps Digest, Vol 43, Issue 95, TroySledhead, 22:46
- Re: [Amps] making aluminum heat sinks black, Will Matney, 22:19
- Re: [Amps] grid fuses, Will Matney, 22:18
- Re: [Amps] making sinks black, Dr. David Kirkby, 22:15
- Re: [Amps] making aluminum heat sinks black, Paul Christensen, 22:05
- Re: [Amps] Radio Pricing the Third Millenium, Keith Dutson, 21:52
- [Amps] Microsoft's MSN and http://www.g8wrb.org, Dr. David Kirkby, 21:48
- Re: [Amps] making aluminum heat sinks black, Will Matney, 21:42
- Re: [Amps] making sinks black, Tom W8JI, 20:47
- Re: [Amps] making sinks black, S. J. Blackwell, 19:33
- Re: [Amps] making sinks black, Tom W8JI, 17:01
- Re: [Amps] making aluminum heat sinks black, Paul Christensen, 16:28
- Re: [Amps] grid fuses, Tom W8JI, 16:25
- [Amps] TEST, Jeff Weinberg W8CQ, 15:30
- Re: [Amps] SB-220 rebuild advice, Christopher J Galbraith, 15:20
- Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 14:33
- Re: [Amps] making aluminum heat sinks black, Will Matney, 14:19
- Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 14:10
- Re: [Amps] making aluminum heat sinks black, pegasus, 14:05
- Re: [Amps] Radio Pricing the Third Millenium, Bob Nielsen, 13:56
- [Amps] Clipperton L Parts For Sale, Jeff Weinberg W8CQ, 13:50
- Re: [Amps] Radio Pricing the Third Millenium, Bill Turner, 13:32
- Re: [Amps] grid fuses, Will Matney, 13:13
- Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, Will Matney, 13:11
- Re: [Amps] making sinks black, slifamily, 13:11
- [Amps] Radio Pricing the Third Millenium, wc6w@juno.com, 13:10
- Re: [Amps] AMPS, Joe Subich, W4TV, 13:07
- Re: [Amps] making sinks black, Steve Thompson, 13:05
- Re: [Amps] making sinks black, , 12:58
- Re: [Amps] making sinks black, Jim Tonne, 12:57
- Re: [Amps] gun drilling liquid cooling holes and making, Tim O'Rourke, 12:45
- Re: [Amps] SB-220 rebuild advice, Paul Christensen, 12:36
- Re: [Amps] making aluminum heat sinks black, Tim O'Rourke, 12:36
- Re: [Amps] making sinks black, Roy Koeppe, 12:34
- Re: [Amps] grid fuses, Tom W8JI, 12:17
- [Amps] Just got done cleaning out my inbox, Joe Isabella, 12:16
- Re: [Amps] QRO membership revoked, Tom W8JI, 12:08
- Re: [Amps] salvaging shorted tubes, Roy Koeppe, 12:05
- Re: [Amps] SB-220 rebuild advice, Tom W8JI, 12:04
- Re: [Amps] QRO membership revoked, kenw2dtc, 12:03
- Re: [Amps] grid fuses, Roy Koeppe, 11:51
- Re: [Amps] AMPS, R L Measures, 11:30
- Re: [Amps] AMPS, R L Measures, 11:30
- Re: [Amps] grid fuses, R L Measures, 11:30
- Re: [Amps] AMPS, R L Measures, 11:30
- Re: [Amps] Why Heathkit and others floated the grids, R L Measures, 11:30
- Re: [Amps] QRO membership revoked, k7fm, 11:29
- Re: [Amps] gun drilling liquid cooling holes and making aluminumheat sinks black, mike kendall, 10:54
- Re: [Amps] 3cx3000A7 driver, Bert Almemo, 10:36
- Re: [Amps] 3cx3000A7 driver, Joe Isabella, 10:29
- Re: [Amps] making aluminum heat sinks black, Steve Thompson, 10:17
- Re: [Amps] making aluminum heat sinks black, , 10:10
- Re: [Amps] making aluminum heat sinks black, slifamily, 10:04
- Re: [Amps] making aluminum heat sinks black, Kenneth D. Grimm, K4XL, 10:00
- Re: [Amps] making aluminum heat sinks black, mike kendall, 09:49
- [Amps] making aluminum heat sinks black, mike kendall, 09:46
- Re: [Amps] Before I turn on my amplifier . . . . . ., Harold Mandel, 09:21
- Re: [Amps] 3cx3000A7 driver, Harold Mandel, 09:12
- [Amps] German HF/VHF rig, Harold Mandel, 09:06
- [Amps] Before I turn on my amplifier . . . . . ., n3nd, 09:06
- Re: [Amps] 3cx3000A7 driver, Steve Thompson, 08:50
- Re: [Amps] 3cx3000A7 driver, Pete Smith, 07:47
- Re: [Amps] 3cx3000A7 driver, Peter Chadwick, 07:00
- Re: [Amps] AMPS, Ian White GM3SEK, 05:10
- Re: [Amps] AMPS, Ian White GM3SEK, 04:30
- Re: [Amps] 3cx3000A7 driver, Frank Goenninger, 03:44
- Re: [Amps] Henry 2K, Martin Sole, 03:05
- Re: [Amps] AMPS, Joe Subich, W4TV, 02:45
- Re: [Amps] 3cx3000A7 driver, Joe Subich, W4TV, 02:45
- Re: [Amps] 3cx3000A7 driver, Michael Tope, 01:11
- Re: [Amps] AMPS, R L Measures, 00:05
- Re: [Amps] 3cx3000A7 driver, Will Matney, 00:00
July 21, 2006
- Re: [Amps] AMPS, Joe Subich, W4TV, 23:59
- [Amps] Why Heathkit and others floated the grids, Tom W8JI, 23:33
- Re: [Amps] 3cx3000A7 driver, Will Matney, 23:08
- Re: [Amps] 3cx3000A7 driver, John D'Ausilio, 22:53
- Re: [Amps] grid fuses, Will Matney, 22:37
- Re: [Amps] grid fuses, Will Matney, 22:33
- Re: [Amps] 3cx3000A7 driver, Bill Turner, 22:33
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 22:31
- Re: [Amps] grid fuses, Tom W8JI, 22:13
- Re: [Amps] AMPS, John Vickers, 21:27
- Re: [Amps] grid fuses, Peter Voelpel, 21:22
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 20:59
- Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 20:32
- Re: [Amps] Gassy tubes, R L Measures, 20:32
- Re: [Amps] AMPS, R L Measures, 20:32
- Re: [Amps] SB-220 rebuild advice, R L Measures, 20:32
- Re: [Amps] AMPS, Joe Subich, W4TV, 20:24
- Re: [Amps] grid fuses, Peter Voelpel, 20:16
- Re: [Amps] grid fuses, GGLL, 20:01
- Re: [Amps] salvaging shorted tubes, Tony King - W4ZT, 19:57
- Re: [Amps] salvaging shorted tubes, Lon W. Cottingham, 19:24
- Re: [Amps] grid fuses, Bill Turner, 19:08
- Re: [Amps] salvaging shorted tubes, Will Matney, 19:04
- Re: [Amps] grid fuses, Will Matney, 18:43
- Re: [Amps]Grid fuses (was: ÃÂ=?ISO-8859-1?Q?Life?= and gain of 3-500Z), Peter Chadwick, 18:07
- [Amps] grid fuses, Lon W. Cottingham, 17:49
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:07
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:07
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:07
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:06
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:05
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:04
- Re: [Amps] grid fuses, R L Measures, 17:04
- [Amps] 3cx3000A7 driver, R L Measures, 17:04
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Roger Glover, 17:03
- Re: [Amps] grid fuses, Tom W8JI, 16:39
- Re: [Amps] grid fuses, Roy Koeppe, 16:22
- Re: [Amps] grid fuses, Chris Howard, 16:02
- Re: [Amps] grid fuses, Chris Howard, 15:57
- Re: [Amps] grid fuses, Chris Howard, 15:47
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 15:36
- Re: [Amps] Grid fuses, Tony King - W4ZT, 15:08
- Re: [Amps] grid fuses, Joe Subich, W4TV, 15:00
- Re: [Amps] Grid fuses, Chris Howard, 14:55
- Re: [Amps] Grid fuses, Tony King - W4ZT, 14:40
- [Amps] SB-220 rebuild advice, Christopher J Galbraith, 14:30
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Roger Glover, 14:29
- [Amps] RE : font sizes, hermans, 14:28
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 14:23
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), David C. Hallam, 14:20
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 14:17
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Chris Howard, 14:15
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 14:05
- [Amps] Gassy tubes, Tom W8JI, 13:59
- Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 13:11
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 13:04
- [Amps] RE : QRO membership revoked, hermans, 12:50
- Re: [Amps] font sizes, Phil Clements, 12:17
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 11:24
- Re: [Amps] Posting in cute font sizes., Bill Turner, 11:23
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 11:20
- Re: [Amps] grid fuses, Will Matney, 11:11
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Chris Howard, 11:09
- Re: [Amps] grid fuses, Will Matney, 11:05
- Re: [Amps] QRO membership revoked, kenw2dtc, 10:56
- Re: [Amps] font sizes, Tony King - W4ZT, 10:49
- Re: [Amps] Posting in cute font sizes., Will Matney, 10:42
- Re: [Amps] AMPS, Joe Subich, W4TV, 10:40
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 10:37
- Re: [Amps] font sizes, bob finger, 10:30
- Re: [Amps] Posting in cute font sizes., Bill Turner, 10:29
- Re: [Amps] font sizes, Pete Smith, 10:27
- Re: [Amps] grid fuses, Bill Turner, 10:16
- [Amps] font sizes, bob finger, 10:13
- Re: [Amps] Posting in cute font sizes., Administrator, 10:07
- Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), Bill Turner, 09:59
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Joe Subich, W4TV, 09:59
- Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), Bill Turner, 09:53
- Re: [Amps] grid fuses, Joe Subich, W4TV, 09:49
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 09:46
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 09:30
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 09:29
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Will Matney, 09:07
- Re: [Amps] AMPS, R L Measures, 08:47
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:43
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 08:42
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 08:42
- Re: [Amps] Runaway grid, R L Measures, 08:42
- [Amps] Posting in cute font sizes., R L Measures, 08:42
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:41
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:41
- Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 08:40
- Re: [Amps] grid fuses, R L Measures, 08:38
- Re: [Amps]Grid fuses (was: ?Life and gain of 3-500Z), R L Measures, 08:38
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:38
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:37
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:37
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:37
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:37
- Re: [Amps] grid fuses, R L Measures, 08:36
- Re: [Amps] grid fuses, R L Measures, 08:36
- Re: [Amps] AMPS, R L Measures, 08:36
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:36
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:35
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 08:35
- Re: [Amps] grid fuses, R L Measures, 08:35
- Re: [Amps] grid fuses, R L Measures, 08:35
- Re: [Amps] grid fuses, Tom W8JI, 07:34
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 07:21
- Re: [Amps] Crowbar that HV!, Mark Hill, 07:11
- [Amps] SELL: Front Panel Mount VErniers w/Pointers, w2cqm@juno.com, 07:05
- [Amps] Runaway grid, Tom W8JI, 07:03
- Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 06:20
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 06:10
- Re: [Amps]Grid fuses (was: ÂLife and gain of 3-500Z), Peter Chadwick, 06:08
- Re: [Amps] grid fuses, Peter Chadwick, 05:59
- Re: [Amps] Life and gain of 3-500Z, Peter Voelpel, 05:46
- [Amps] Meaurements, Steve Thompson, 05:30
- Re: [Amps] QRO membership revoked, Peter Chadwick, 05:23
- Re: [Amps] Henry 2K, PlanerGuy, 04:05
- Re: [Amps] AMPS, Ian White GM3SEK, 03:45
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 03:45
- Re: [Amps] grid fuses, Will Matney, 02:30
July 20, 2006
- Re: [Amps] grid fuses, Will Matney, 23:38
- Re: [Amps] grid fuses, Chris Howard, 22:58
- Re: [Amps] grid fuses, Tom W8JI, 22:00
- Re: [Amps] grid fuses, Tom W8JI, 21:57
- Re: [Amps] grid fuses, Michael Tope, 20:39
- Re: [Amps] grid fuses, Will Matney, 20:28
- Re: [Amps] grid fuses, Joe Subich, W4TV, 20:03
- Re: [Amps] grid fuses, Chris Howard, 19:56
- Re: [Amps] Henry 2K, Will Matney, 19:49
- Re: [Amps] grid fuses, Will Matney, 19:48
- Re: [Amps] grid fuses, Tom W8JI, 19:26
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), S. J. Blackwell, 19:00
- Re: [Amps] AMPS, Ian White GM3SEK, 18:51
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 18:43
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 18:42
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Ian White GM3SEK, 18:09
- Re: [Amps] crowbar TSPA, Ian White GM3SEK, 18:03
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Joe Subich, W4TV, 17:48
- Re: [Amps] AMPS, R L Measures, 17:05
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:05
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:05
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 17:05
- Re: [Amps] grid fuses, GGLL, 16:38
- [Amps] crowbar TSPA, John T. M. Lyles, 16:16
- Re: [Amps] grid fuses, Will Matney, 15:48
- Re: [Amps] Henry 2K, Will Matney, 15:36
- Re: [Amps] Why mu TSPA, Jim Tonne, 13:58
- [Amps] Why mu TSPA, John T. M. Lyles, 13:45
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 13:38
- Re: [Amps] Crowbar that HV!, kenw2dtc, 13:29
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 13:13
- [Amps] Crowbar that HV!, Mark Hill, 12:24
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 12:10
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 12:01
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 11:57
- Re: [Amps] grid fuses, Tom W8JI, 11:49
- [Amps] Henry 2K, Martin Sole, 11:33
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Peter Voelpel, 11:09
- Re: [Amps] grid fuses, Joe Subich, W4TV, 10:50
- Re: [Amps] grid fuses, R L Measures, 10:34
- Re: [Amps] grid fuses, R L Measures, 10:34
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 10:34
- Re: [Amps] grid fuses, R L Measures, 10:34
- Re: [Amps] FW: RF Chokes, R L Measures, 10:34
- Re: [Amps] grid fuses.... the real story., R L Measures, 10:33
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Mike Schatzberg, 10:09
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Gary Schafer, 09:32
- [Amps] FW: Grid fuses (was: Life and gain of 3-500Z), Larry Carman, 09:32
- Re: [Amps] grid fuses, GGLL, 09:01
- Re: [Amps] AMPS, Harold Mandel, 07:42
- Re: [Amps] grid fuses, Tom W8JI, 06:38
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 06:28
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 06:10
- Re: [Amps] Hi Mu, Low Mu, Tom W8JI, 05:53
July 19, 2006
- Re: [Amps] AMPS, W7RY, 23:11
- Re: [Amps] grid fuses, Mike K6BR, 22:43
- Re: [Amps] grid fuses, Paul Christensen, 22:29
- Re: [Amps] grid fuses, Keith Dutson, 21:56
- Re: [Amps] grid fuses, Joe Subich, W4TV, 19:47
- Re: [Amps] grid fuses, Gudguyham, 18:48
- [Amps] grid fuses, Lon W. Cottingham, 18:29
- [Amps] Hi Mu, Low Mu, Barrie Smith, 18:29
- Re: [Amps] Hi Mu correction, Tony King - W4ZT, 17:52
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), R L Measures, 16:12
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Gudguyham, 15:51
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 15:16
- [Amps] micro miniature fuses...., john . brewer, 14:50
- Re: [Amps] Hi Mu correction, crawfish, 14:36
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Paul Christensen, 14:22
- Re: [Amps] Hi Mu correction, Phil Clements, 14:02
- Re: [Amps] Grid fuses (was: Life and gain of 3-500Z), Tom W8JI, 13:54
- Re: [Amps] RF Chokes, Will Matney, 13:04
- [Amps] Valve data sheets - excellent site, Mark Hill, 12:53
- Re: [Amps] Hi Mu correction, Mark Hill, 12:06
- [Amps] Grid fuses (was: Life and gain of 3-500Z), Bill Turner, 11:29
- Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 11:22
- Re: [Amps] 6m AMP Santa Monica, Steve Katz, 10:52
- Re: [Amps] Hi Mu correction, Bill Fuqua, 10:49
- Re: [Amps] 6m AMP Santa Monica, Tom W8JI, 10:45
- [Amps] Henry 2K manual, Martin Sole, 10:42
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 10:41
- Re: [Amps] Amps Digest, Vol 43, Issue 70, R L Measures, 10:40
- Re: [Amps] Hi Mu correction, R L Measures, 10:40
- Re: [Amps] RF Chokes, R L Measures, 10:39
- Re: [Amps] RF Chokes, R L Measures, 10:39
- Re: [Amps] RF Chokes, R L Measures, 10:39
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 10:39
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 10:39
- Re: [Amps] FW: RF Chokes, R L Measures, 10:39
- [Amps] FW: RF Chokes, R L Measures, 10:38
- Re: [Amps] RF Chokes, Harold Mandel, 09:32
- Re: [Amps] RF Chokes, Peter Voelpel, 09:29
- Re: [Amps] RF Chokes, GGLL, 09:22
- Re: [Amps] RF Chokes, Kenneth D. Grimm, K4XL, 09:09
- [Amps] 6m AMP Santa Monica, Thorsten DL7PP, 08:29
- [Amps] RE : Amps Digest, Vol 43, Issue 70, hermans, 08:11
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Gudguyham, 06:43
- Re: [Amps] Hi Mu correction, Tom W8JI, 05:58
- Re: [Amps] Hi Mu correction, Tony King - W4ZT, 00:11
July 18, 2006
- [Amps] Hi Mu correction, Tom W8JI, 22:56
- Re: [Amps] QRO membership revoked, Bill Coleman, 21:56
- Re: [Amps] transformers, Keith Dutson, 21:41
- [Amps] One Call, One Contact 6m Amplifier, w2cqm@juno.com, 21:26
- Re: [Amps] RF Chokes, wc6w@juno.com, 21:20
- Re: [Amps] Life and gain of 3-500Z, Steve Katz, 19:15
- Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 19:10
- Re: [Amps] RF Chokes, Tom W8JI, 19:09
- [Amps] Bill Orr's PEP, RCM, 19:08
- Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 19:07
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 18:40
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 18:40
- Re: [Amps] Amps Digest, Vol 43, Issue 70, R L Measures, 18:39
- Re: [Amps] Life and gain of 3-500Z, Peter Voelpel, 18:12
- Re: [Amps] RF Chokes, Phil Clements, 18:00
- Re: [Amps] Life and gain of 3-500Z, Phil Clements, 17:53
- Re: [Amps] RF Chokes, Will Matney, 17:12
- Re: [Amps] Life and gain of 3-500Z, k7rdx, 17:02
- [Amps] FW: RF Chokes, Phil Clements, 16:56
- [Amps] FW: RF Chokes, Phil Clements, 16:54
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Keith Dutson, 16:50
- Re: [Amps] RF Chokes, w1itt, 16:30
- [Amps] valve check, Vic, 16:19
- Re: [Amps] RF Chokes, Tom W8JI, 16:16
- Re: [Amps] RF Chokes, Harold Mandel, 15:51
- Re: [Amps] Fw: transformers, Gary Schafer, 15:51
- Re: [Amps] RF Chokes, Tom W8JI, 15:28
- Re: [Amps] RF Chokes, Phil Clements, 14:49
- Re: [Amps] RF Chokes, Phil Clements, 13:44
- [Amps] RF Chokes, w1itt, 12:45
- Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 12:30
- Re: [Amps] Life and gain of 3-500Z, Tom W8JI, 12:29
- Re: [Amps] RF Chokes, wc6w@juno.com, 12:12
- Re: [Amps] Amps Digest, Vol 43, Issue 70, W7RY, 12:02
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Gary Schafer, 11:33
- [Amps] Fw: transformers, m.ford, 11:27
- [Amps] Central Electronics 600L, Tom Martin, 11:13
- Re: [Amps] transformers, Gary Schafer, 10:59
- Re: [Amps] Amps Digest, Vol 43, Issue 70, m.ford, 10:51
- Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 10:43
- Re: [Amps] Life and gain of 3-500Z, Joe Isabella, 10:37
- Re: [Amps] Life and gain of 3-500Z, Mike Schatzberg, 10:35
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Tom W8JI, 10:11
- Re: [Amps] Life and gain of 3-500Z, k7rdx, 10:09
- Re: [Amps] Life and gain of 3-500Z, R L Measures, 09:21
- Re: [Amps] RF Chokes, R L Measures, 09:21
- Re: [Amps] output of SB220 typical TSPA, R L Measures, 09:20
- Re: [Amps] transformers, R L Measures, 09:20
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Gudguyham, 09:11
- Re: [Amps] Amps Digest, Vol 43, Issue 70, Edwin Karl, 09:05
- Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 08:13
- Re: [Amps] Tetrode Amplifier, m.ford, 07:48
- [Amps] Fw: transformers, m.ford, 06:33
- Re: [Amps] RF Chokes, Tom W8JI, 06:16
- [Amps] Life and gain of 3-500Z, Tom W8JI, 06:14
- [Amps] Question, Will Matney, 01:31
- Re: [Amps] transformers, Gary Schafer, 01:20
July 17, 2006
- Re: [Amps] transformers, m.ford, 22:53
- Re: [Amps] RF Chokes, GGLL, 22:31
- Re: [Amps] transformers, Gary Schafer, 21:38
- Re: [Amps] output of SB220 typical TSPA, k7rdx, 21:26
- Re: [Amps] transformers, Joe Isabella, 20:47
- Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 20:34
- Re: [Amps] output of SB220 typical TSPA, Tom W8JI, 19:19
- Re: [Amps] transformers, Gudguyham, 18:55
- Re: [Amps] QRO membership revoked, Gudguyham, 18:40
- Re: [Amps] transformers, Peter Voelpel, 18:02
- Re: [Amps] transformers, Keith Dutson, 17:50
- [Amps] RE : QRO membership revoked, hermans, 17:28
- Re: [Amps] output of SB220 typical TSPA, k7rdx, 17:22
- Re: [Amps] transformers, R L Measures, 16:07
- Re: [Amps] QRO membership revoked, Ian White GM3SEK, 14:23
- Re: [Amps] output of SB220 typical TSPA, Joe Isabella, 14:21
- Re: [Amps] QRO membership revoked, m.ford, 14:19
- Re: [Amps] QRO membership revoked, Joe Isabella, 14:17
- Re: [Amps] RF Chokes, Phil Clements, 14:14
- Re: [Amps] QRO membership revoked, Steve Thompson, 14:06
- Re: [Amps] QRO membership revoked, Will Matney, 13:52
- [Amps] Power PEP vs drive power, Tom W8JI, 13:50
- Re: [Amps] transformers, m.ford, 13:47
- Re: [Amps] QRO membership revoked, Will Matney, 13:43
- Re: [Amps] output of SB220 typical TSPA, Will Matney, 13:41
- Re: [Amps] transformers, Will Matney, 13:35
- Re: [Amps] QRO membership revoked, Tony King - W4ZT, 13:34
- Re: [Amps] QRO membership revoked, Peter Chadwick, 13:28
- Re: [Amps] RF Chokes, Peter Chadwick, 13:25
- [Amps] output of SB220 typical TSPA, John T. M. Lyles, 13:13
- Re: [Amps] QRO membership revoked, kenw2dtc, 12:59
- Re: [Amps] QRO membership revoked, Roy Koeppe, 12:52
- Re: [Amps] transformers, John Vickers, 12:40
- Re: [Amps] transformers, Gary Schafer, 11:17
- Re: [Amps] QRO membership revoked, Joe Isabella, 10:51
- Re: [Amps] transformers, Joe Isabella, 10:50
- [Amps] QRO membership revoked, Tom W8JI, 10:45
- Re: [Amps] RF Chokes, Bill Turner, 10:45
- Re: [Amps] transformers, Peter Voelpel, 10:41
- Re: [Amps] RF Chokes, Harold Mandel, 10:36
- Re: [Amps] transformers, Gudguyham, 10:21
- Re: [Amps] RF Chokes, Tom W8JI, 10:15
- Re: [Amps] RF Chokes, Roy Koeppe, 10:06
- Re: [Amps] transformers, Gudguyham, 10:01
- Re: [Amps] RF Chokes, Dan Hearn, 09:42
- Re: [Amps] transformers, John Vickers, 09:35
- Re: [Amps] high frequency filament excitation TSPA, Larry Carman, 09:30
- Re: [Amps] transformers, John Vickers, 09:20
- Re: [Amps] transformers, Mike Schatzberg, 08:46
- Re: [Amps] transformers, R L Measures, 08:26
- Re: [Amps] Peak power ratings, R L Measures, 08:26
- Re: [Amps] Transformers, R L Measures, 08:26
- Re: [Amps] Peak power ratings, R L Measures, 08:26
- Re: [Amps] FW: Transformers, R L Measures, 08:26
- Re: [Amps] FW: Transformers, R L Measures, 08:26
- Re: [Amps] transformers, Gudguyham, 07:43
- Re: [Amps] transformers, Peter Chadwick, 07:41
- Re: [Amps] transformers, m.ford, 07:39
- Re: [Amps] RF Chokes, Peter Chadwick, 07:27
- Re: [Amps] transformers, Gudguyham, 07:27
- Re: [Amps] FW: ÂTransformers, Peter Chadwick, 07:15
- Re: [Amps] FW: Transformers, Gudguyham, 07:01
- Re: [Amps] transformers, Paul Christensen, 07:01
- Re: [Amps] Peak power ratings, Gudguyham, 06:50
- Re: [Amps] Peak power ratings, Gudguyham, 06:49
- Re: [Amps] Transformers, Gudguyham, 06:41
- Re: [Amps] transformers, Tom W8JI, 06:19
- Re: [Amps] transformers, Tom W8JI, 06:15
- Re: [Amps] RF Chokes, Mark Hill, 06:02
- Re: [Amps] transformers, Tom W8JI, 06:01
- [Amps] RF Chokes, Peter Chadwick, 05:23
- Re: [Amps] transformers, Peter Chadwick, 04:54
- Re: [Amps] FW: Transformers, Steve Thompson, 02:37
- [Amps] Procedure for firing up NOS 4CX1000A in a 30S-1?, Steve Gehring, 02:05
July 16, 2006
- Re: [Amps] transformers, Mike Schatzberg, 23:06
- Re: [Amps] transformers, Gary Schafer, 22:32
- Re: [Amps] Transformers, R L Measures, 22:32
- Re: [Amps] transformers, R L Measures, 22:32
- Re: [Amps] Transformers, R L Measures, 22:31
- Re: [Amps] transformers, R L Measures, 22:31
- Re: [Amps] transformers, Will Matney, 22:20
- Re: [Amps] transformers, Mike Schatzberg, 22:12
- Re: [Amps] FW: Transformers, Gary Schafer, 21:58
- Re: [Amps] FW: Transformers, Peter Voelpel, 21:49
- Re: [Amps] transformers, Tom W8JI, 21:43
- Re: [Amps] FW: Transformers, Gary Schafer, 21:39
- Re: [Amps] FW: Transformers, Peter Voelpel, 21:27
- Re: [Amps] FW: Transformers, Gary Schafer, 21:20
- Re: [Amps] transformers, Mike Schatzberg, 21:00
- Re: [Amps] transformers, Bob Nielsen, 20:24
- [Amps] Peak power ratings, Gudguyham, 20:13
- Re: [Amps] FW: Transformers, Gudguyham, 20:01
- Re: [Amps] transformers, John Vickers, 19:54
- Re: [Amps] Transformers, Gudguyham, 19:54
- [Amps] FW: Transformers, Peter Voelpel, 19:53
- Re: [Amps] transformers(SB220 power), Gudguyham, 19:35
- Re: [Amps] transformers, Mike K6BR, 19:26
- Re: [Amps] Transformers, Gudguyham, 19:17
- Re: [Amps] transformers, Mike Schatzberg, 18:57
- Re: [Amps] transformers, John Vickers, 18:10
- [Amps] SB220, Tom W8JI, 18:07
- Re: [Amps] Switching Power Supplies, Steve Thompson, 18:02
- Re: [Amps] transformers, John Vickers, 17:09
- Re: [Amps] transformers, Roy Koeppe, 15:07
- Re: [Amps] transformers, Tom W8JI, 13:49
- Re: [Amps] Filament life, S. J. Blackwell, 12:50
- Re: [Amps] Switching Power Supplies, Harold Mandel, 12:03
- Re: [Amps] Transformers, Gudguyham, 11:28
- Re: [Amps] Transformers, R L Measures, 11:22
- Re: [Amps] Transformers, R L Measures, 11:22
- Re: [Amps] Transformers, R L Measures, 11:22
- Re: [Amps] Filament life, R L Measures, 11:21
- Re: [Amps] Filament life, R L Measures, 11:21
- Re: [Amps] transformers, Roy Koeppe, 10:05
- Re: [Amps] Transformers, Will Matney, 09:53
- Re: [Amps] Transformers, Will Matney, 09:45
- Re: [Amps] Transformers, Gudguyham, 08:24
- Re: [Amps] Transformers, Tom W8JI, 07:23
- Re: [Amps] Transformers, Tom W8JI, 07:16
- Re: [Amps] Transformers, Steve Thompson, 06:48
- [Amps] Henry 2K parts needed, k9rj, 04:57
- Re: [Amps] Transformers, Steve Thompson, 04:13
- Re: [Amps] Transformers, Will Matney, 03:41
- Re: [Amps] Transformers, Will Matney, 03:30
- Re: [Amps] Filament life, S. J. Blackwell, 03:25
- Re: [Amps] Transformers, Peter Chadwick, 03:07
- Re: [Amps] Filament life, R L Measures, 01:21
- Re: [Amps] Filament life, R L Measures, 01:21
July 15, 2006
- Re: [Amps] high frequency filament excitation TSPA, Larry Carman, 15:57
- Re: [Amps] Transformers, Will Matney, 13:16
- Re: [Amps] Tetrode Amplifier, Bob Maser, 13:10
- Re: [Amps] Transformers, Will Matney, 13:06
- Re: [Amps] Transformers, Will Matney, 12:54
- [Amps] Tetrode Amplifier, Bob Maser, 11:59
- Re: [Amps] Filament life, Gudguyham, 11:28
- Re: [Amps] Transformers, Gudguyham, 11:22
- Re: [Amps] Filament life, Peter Chadwick, 10:20
- Re: [Amps] Transformers, Joe Isabella, 09:51
- Re: [Amps] Transformers, Tom W8JI, 06:45
- Re: [Amps] Filament life, Gudguyham, 06:29
- Re: [Amps] Switching Power Supplies, Ian White GM3SEK, 06:24
- Re: [Amps] Switching Power Supplies, Steve Thompson, 03:05
- Re: [Amps] Switching Power Supplies, Steve Thompson, 02:49
- Re: [Amps] high frequency filament excitation TSPA, R L Measures, 01:43
- [Amps] Filament life, Rob & Terri Sherwood, 01:22
- Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 01:15
- Re: [Amps] Transformers, Will Matney, 00:46
- [Amps] Transformers, Tom W8JI, 00:02
July 14, 2006
- Re: [Amps] Switching Power Supplies, Will Matney, 23:02
- Re: [Amps] Switching Power Supplies, David Smith, 21:58
- Re: [Amps] Switching Power Supplies, Tom W8JI, 21:54
- Re: [Amps] Switching Power Supplies, Tom W8JI, 21:49
- Re: [Amps] Switching Power Supplies, Joe Isabella, 21:23
- Re: [Amps] Switching Power Supplies, Will Matney, 20:14
- Re: [Amps] Switching Power Supplies, wc6w@juno.com, 20:06
- Re: [Amps] Switching Power Supplies, Will Matney, 20:01
- Re: [Amps] Switching Power Supplies, Ian White GM3SEK, 19:02
- Re: [Amps] Switching Power Supplies, Tom W8JI, 18:51
- Re: [Amps] Switching Power Supplies, Tom W8JI, 17:29
- Re: [Amps] Switching Power Supplies, Steve Thompson, 17:25
- Re: [Amps] Switching Power Supplies, Tom W8JI, 17:24
- Re: [Amps] Switching Power Supplies, Will Matney, 16:29
- Re: [Amps] Switching Power Supplies, David Lisney, 15:51
- Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 15:36
- Re: [Amps] Switching Power Supplies, Will Matney, 15:30
- Re: [Amps] Switching Power Supplies, Joe Isabella, 15:26
- Re: [Amps] 8 pin balanced mixer, David Lisney, 15:16
- Re: [Amps] Switching Power Supplies, Tony King - W4ZT, 14:57
- Re: [Amps] Switching Power Supplies, Keith Dutson, 14:52
- Re: [Amps] Switching Power Supplies, Vic K2VCO, 14:40
- Re: [Amps] Switching Power Supplies, Steve Thompson, 14:32
- Re: [Amps] High frequency heater supplies, m.ford, 14:14
- Re: [Amps] Switching Power Supplies, Colin Lamb, 14:07
- Re: [Amps] Switching Power Supplies, Tom W8JI, 13:52
- Re: [Amps] High frequency heater supplies, Steve Thompson, 13:40
- [Amps] Switching Power Supplies, Jim Brown, 13:27
- Re: [Amps] High frequency heater supplies, W7RY, 11:30
- Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 05:03
- Re: [Amps] High frequency heater supplies, Val, 01:52
July 13, 2006
- Re: [Amps] high frequency filament excitation TSPA, k7rdx, 20:09
- Re: [Amps] high frequency filament excitation TSPA, Tom W8JI, 15:10
- Re: [Amps] High frequency heater supplies, Tony King - W4ZT, 13:40
- [Amps] high frequency filament excitation TSPA, John T. M. Lyles, 12:24
- Re: [Amps] High frequency heater supplies, Steve Thompson, 11:42
- Re: [Amps] High frequency heater supplies, Jim Tonne, 11:35
- [Amps] dielectrics TSPA, John T. M. Lyles, 11:34
- [Amps] High frequency heater supplies, Steve Thompson, 10:36
- Re: [Amps] Mica cap substitute \ alternative, k7fm, 10:13
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 09:42
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 09:41
- Re: [Amps] FL-2100B, Tom W8JI, 08:39
- [Amps] FL-2100B, David Douglass, 08:04
- Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 07:23
- Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 07:13
- Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 06:43
- Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 03:03
July 12, 2006
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 21:52
- [Amps] FS: FILAMENT TRANSFORMERS Pair of 833A's and Pair of 4-1000s, JimMoci, 21:12
- Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 19:09
- Re: [Amps] Mica cap substitute \ alternative, m.ford, 18:31
- Re: [Amps] Mica cap substitute \ alternative, Joe Subich, W4TV, 18:04
- Re: [Amps] Mica cap substitute \ alternative, Ian White GM3SEK, 17:59
- [Amps] FL2100B Problem, Bruce Lanning, 17:32
- Re: [Amps] Mica cap substitute \ alternative, Harold Mandel, 17:28
- Re: [Amps] Mica cap substitute \ alternative, Gary Smith, 17:17
- [Amps] WTB: Plate transformer, Gudguyham, 15:48
- [Amps] Looking for these data sheets., Dr. David Kirkby, 12:29
- Re: [Amps] L4-B Power Supply, dcoffman, 10:37
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 09:50
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 09:50
- Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 09:00
- Re: [Amps] Amps Digest, Vol 43, Issue 43, dpease, 08:11
- Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 05:13
- Re: [Amps] TP9383/SD1460 used in 70MHz PA, Steve Thompson, 02:52
- Re: [Amps] RE : Solid state amp, Will Matney, 00:07
July 11, 2006
- Re: [Amps] FL2100B, R L Measures, 22:42
- Re: [Amps] RE : Solid state amp, Will Matney, 21:48
- Re: [Amps] FL2100B, Tom W8JI, 21:26
- Re: [Amps] FL2100B, Will Matney, 21:10
- Re: [Amps] FL2100B, Gudguyham, 18:24
- Re: [Amps] TP9383/SD1460 used in 70MHz PA, Fern Rivard, 18:23
- Re: [Amps] FL2100B, Steve Katz, 18:20
- [Amps] FL2100B, carl s., 18:19
- [Amps] TP9383/SD1460 used in 70MHz PA, Dick, 16:25
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 11:36
- Re: [Amps] Silly question - interim report on results., Harold Mandel, 09:53
- Re: [Amps] Silly question - interim report on results., Tom W8JI, 09:21
- Re: [Amps] Silly question - interim report on results., Harold Mandel, 08:51
- Re: [Amps] Silly question - interim report on results., Peter Chadwick, 08:44
- Re: [Amps] Silly question - interim report on results., Tom W8JI, 08:27
- Re: [Amps] Silly question - interim report on results., Peter Chadwick, 07:48
- Re: [Amps] Silly question - interim report on results., Tom W8JI, 06:35
- Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, m.ford, 06:21
- [Amps] Silly question - interim report on results., Peter Chadwick, 04:23
- Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Peter Chadwick, 03:42
- Re: [Amps] Mica cap substitute \ alternative, Peter Chadwick, 03:39
- Re: [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Steve Thompson, 02:32
- [Amps] Ferritronics FL2200m DBM for 4CX10,000amp, Don Moman VE6JY, 02:20
July 10, 2006
- Re: [Amps] 3CX1200D7 on eBay, John Vickers, 22:27
- Re: [Amps] 3CX1200D7 on eBay, Dr. David Kirkby, 22:12
- Re: [Amps] Mica cap substitute \ alternative, R L Measures, 22:08
- Re: [Amps] SD1460 BJT TSPA, m.ford, 18:54
- Re: [Amps] 3CX1200D7 on eBay, m.ford, 18:33
- [TowerTalk] Power Rating of Johnson 229-203 28 uH. roller inductors, kd4e, 17:19
- [Amps] SD1460 BJT TSPA, John T. M. Lyles, 14:24
- Re: [Amps] Mica cap substitute \ alternative, Tom W8JI, 12:38
- Re: [Amps] Data sheet upload - can someone check it for me?, Will Matney, 12:03
- [Amps] Henry 2K4 Pi-L Tank Circuit Purchaser Please send e-maill, w2cqm@juno.com, 11:07
- Re: [Amps] 3CX1200D7 on eBay, Harold Mandel, 10:52
- [Amps] 3CX1200D7 on eBay, Bob Maser, 10:39
- [Amps] Mica cap substitute \ alternative, aborg, 10:26
- Re: [Amps] Data sheet upload - can someone check it for me?, Dr. David Kirkby, 03:24
- Re: [Amps] Question about glowing 3-400z's, Tom W8JI, 01:26
- Re: [Amps] Hi-Pot Tester for sale, R L Measures, 01:15
- [Amps] Question about glowing 3-400z's, Fern Rivard, 01:08
- Re: [Amps] Question about glowing 3-400z's, Gary Smith, 01:01
- Re: [Amps] Data sheet upload - can someone check it for me?, Will Matney, 00:34
July 09, 2006
- Re: [Amps] Data sheet upload - can someone check it for me?, Alek Petkovic, 23:50
- Re: [Amps] Question about glowing 3-400z's, Scott Townley, 23:44
- [Amps] Question about glowing 3-400z's, w2cqm@juno.com, 22:26
- Re: [Amps] 813 amp, Dr. David Kirkby, 22:05
- [Amps] 813 amp, Will Matney, 22:02
- [Amps] Data sheet upload - can someone check it for me?, Dr. David Kirkby, 21:34
- Re: [Amps] Hi-Pot Tester for sale, Will Matney, 16:02
- Re: [Amps] Hi-Pot Tester for sale, Angelo Karabetsos, 12:02
- Re: [Amps] Hi-Pot Tester for sale, ToddRoberts2001, 09:41
- [Amps] Hi-Pot Tester for sale, Gene Bigham, 08:57
- [Amps] New tube data sheets online / upload youself., Dr. David Kirkby, 07:14
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 02:38
- Re: [Amps] QEX Innovative Tube Linear?, Joe Subich, W4TV, 02:32
- Re: [Amps] *** SPAM *** Re[2]: QEX Innovative Tube Linear?, Will Matney, 02:29
- Re: [Amps] Datasheet limits, Peter Chadwick, 02:09
- Re: [Amps] *** SPAM *** Re[2]: QEX Innovative Tube Linear?, Peter Chadwick, 02:01
July 08, 2006
- Re: [Amps] Datasheet limits, Will Matney, 22:22
- [Amps] Datasheet limits, john, 21:48
- Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 15:44
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 15:08
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 14:43
- [Amps] Hi-Pot Tester for sale, Angelo Karabetsos, 13:38
- Re: [Amps] QEX Innovative Tube Linear?, S. J. Blackwell, 11:03
- Re: [Amps] QEX Innovative Tube Linear?, Bill Turner, 10:50
- Re: [Amps] QEX Innovative Tube Linear?, Jim Tonne, 09:40
- Re: [Amps] QEX Innovative Tube Linear?, Peter Chadwick, 09:16
- [Amps] TP9383 (SD1460) used in SSB amplifiers?, Dick, 01:57
- Re: [Amps] 2kw sweep tube amp....again, Will Matney, 01:46
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 01:39
- Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 01:06
- Re: [Amps] QEX Innovative Tube Linear?, R L Measures, 01:05
- Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 00:31
July 07, 2006
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 22:35
- Re: [Amps] 2kw sweep tube amp....again, ToddRoberts2001, 21:25
- Re: [Amps] 2kw sweep tube amp....again, Michael Tope, 21:21
- Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 20:40
- [Amps] 2kw sweep tube amp....again, Dick Hanson, 20:19
- [Amps] WTB Vacuum Variable cap, Gary - N3JPU, 19:41
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 19:38
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 19:36
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 19:15
- Re: [Amps] QEX Innovative Tube Linear?, Joe Subich, W4TV, 17:58
- Re: [Amps] QEX Innovative Tube Linear?, Tom W8JI, 17:52
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 16:54
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 16:49
- [Amps] FS: FILAMENT TRANSFORMER 7.5VAC 52 AMPS, JimMoci, 14:13
- Re: [Amps] QEX Innovative Tube Linear?, Will Matney, 12:07
- Re: [Amps] QEX Innovative Tube Linear?, zdtech, 09:51
- [Amps] QEX Innovative Tube Linear?, zdtech, 09:22
- Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 01:24
July 06, 2006
- [Amps] SELL: Amp Builder's Components, w2cqm@juno.com, 22:50
- Re: [Amps] RE : Solid state amp, Will Matney, 21:28
- Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 18:07
- Re: [Amps] RE : Solid state amp, Bert Almemo, 17:41
- [Amps] RE : Solid state amp, hermans, 14:55
- Re: [Amps] Solid state amp, Vic K2VCO, 12:02
- Re: [Amps] Solid state amp, Keith LaBorde - K4KAL, 10:07
- Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 10:04
- [Amps] Solid state amp, Martin Sole, 09:37
- Re: [Amps] Advanced Power Technologies ARF1505, Peter Chadwick, 09:37
- Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 08:50
- Re: [Amps] Advanced Power Technologies ARF1505, mike kendall, 08:03
- Re: [Amps] Advanced Power Technologies ARF1505, Steve Thompson, 05:45
- Re: [Amps] Advanced Power Technologies ARF1505, mike kendall, 05:13
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 00:33
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 00:33
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 00:32
July 05, 2006
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 21:36
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 21:36
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Smith, 21:36
- Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 13:06
- Re: [Amps] Advanced Power Technologies ARF1505, Joe Subich, W4TV, 12:58
- Re: [Amps] New SGC Mini Lini Uses Class E Technology, ToddRoberts2001, 12:44
- Re: [Amps] New SGC Mini Lini Uses Class E Technology, Jim Tonne, 12:30
- Re: [Amps] New SGC Mini Lini Uses Class E Technology, Bill Fuqua, 12:20
- Re: [Amps] Advanced Power Technologies ARF1505, m.ford, 12:14
- [Amps] Advanced Power Technologies ARF1505, mike kendall, 11:45
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 11:32
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 11:11
- Re: [Amps] *** SPAM *** Re: Safety grounding - was Mains IsolationTransformer, Peter Chadwick, 10:54
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 10:50
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 10:09
- Re: [Amps] GS35 144MHz amp faileur, how should we test, Tony King - W4ZT, 09:55
- Re: [Amps] GS35 144MHz amp faileur, how should we test it.....?, David C. Hallam, 09:34
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, ToddRoberts2001, 09:22
- Re: [Amps] GS35 144MHz amp faileur, how should we test it.....?, Peter Chadwick, 09:22
- [Amps] GS35 144MHz amp faileur, how should we test it.....?, Robert Thain, 08:40
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 07:44
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 07:30
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 07:24
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 07:21
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 01:28
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 01:28
- Re: [Amps] L4-B Power Supply, R L Measures, 01:28
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 01:28
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 01:28
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 01:28
- Re: [Amps] How to tune an FL-2100B, R L Measures, 01:27
- Re: [Amps] How to tune an FL-2100B, R L Measures, 01:27
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Roger Parsons, 00:31
- Re: [Amps] Amps Digest, Vol 43, Issue 25, Edwin Karl, 00:07
July 04, 2006
- [Amps] BLF278 on 50MHz??, Dick, 16:06
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 15:28
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 15:07
- Re: [Amps] L4-B Power Supply, Vic K2VCO, 14:19
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 14:13
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Mike Sawyer, 13:40
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 12:18
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 11:57
- Re: [Amps] L4-B Power Supply, Gudguyham, 11:49
- [Amps] L4-B Power Supply, Tom Sessions, 11:15
- [Amps] L4-B Power Supply, Tom Sessions, 11:15
- Re: [Amps] How to tune an FL-2100B, Tom W8JI, 10:40
- Re: [Amps] Amps Digest, Vol 43, Issue 23, Edwin Karl, 10:35
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Tony King - W4ZT, 10:12
- Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 09:53
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 09:51
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 09:02
- Re: [Amps] How to tune an FL-2100B, Dan Wright, 08:55
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 08:51
- Re: [Amps] Bandwidth tests, R L Measures, 08:51
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 08:50
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 08:50
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 08:50
- Re: [Amps] Safety grounding, Gudguyham, 08:43
- Re: [Amps] Maximum RF output in practical application: 4-250A, Gudguyham, 08:28
- Re: [Amps] How to tune an FL-2100B, Tom W8JI, 08:09
- Re: [Amps] 4CX10 000J / Racal MA1723, Peter Voelpel, 07:26
- [Amps] How to tune an FL-2100B, Dan Wright, 07:02
- Re: [Amps] Bandwidth tests, Peter Chadwick, 06:56
- Re: [Amps] Bandwidth tests, Mark Hill, 06:42
- Re: [Amps] Bandwidth tests, Tom W8JI, 06:10
- Re: [Amps] Bandwidth tests, Jan Erik Holm, 05:04
- Re: [Amps] Bandwidth tests, Peter Chadwick, 03:38
- Re: [Amps] Bandwidth, David Lisney, 01:34
July 03, 2006
- Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 23:56
- Re: [Amps] Bandwidth tests, Tom W8JI, 22:49
- Re: [Amps] Maximum RF output in practical application: 4-250A, W2RU - Bud Hippisley, 22:40
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 22:22
- Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 22:04
- Re: [Amps] Maximum RF output in practical application: 4-250A, Keith Dutson, 20:50
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Paul Christensen, 20:41
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 20:03
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 20:00
- Re: [Amps] Bandwidth tests, Michael Tope, 19:48
- Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 19:34
- Re: [Amps] Bandwidth tests, Tom W8JI, 19:15
- [Amps] SELL:Vintage Amperex 866AX Rectifier tubes, w2cqm@juno.com, 18:55
- Re: [Amps] Maximum RF output in practical application: 4-250A, Paul Christensen, 18:52
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 18:48
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 18:31
- Re: [Amps] Broadband noise, zl1aih, 18:30
- Re: [Amps] Maximum RF output in practical application: 4-250A, Chris Howard, 18:26
- Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 18:07
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 18:00
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 17:57
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 17:57
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 17:57
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 17:56
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 17:56
- Re: [Amps] Bandwidth tests, Joe Isabella, 17:45
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 17:43
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 17:32
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 17:27
- [Amps] SELL: Ameritron AL1200 Contestor's Amplifier, w2cqm@juno.com, 17:26
- [Amps] Bandwidth tests, Tom W8JI, 17:24
- Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 17:02
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Gudguyham, 16:12
- Re: [Amps] Maximum RF output in practical application: 4-250A, Mike Sawyer, 15:48
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 15:46
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 15:37
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 15:34
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 15:29
- Re: [Amps] Maximum RF output in practical application: 4-250A, Paul Christensen, 15:20
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 14:51
- [Amps] Efficiency, Tom W8JI, 14:43
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 14:39
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 14:17
- Re: [Amps] Maximum RF output in practical application: 4-250A, David G4FTC, 14:10
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 14:07
- Re: [Amps] WTB: Johnson or Eimac tube socket, m.ford, 13:48
- Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 13:30
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 12:51
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 12:46
- Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 12:42
- [Amps] WTB: Johnson or Eimac tube socket, wc6w@juno.com, 12:40
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, David C. Hallam, 12:38
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 12:29
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 12:23
- Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 12:20
- Re: [Amps] 4CX10 000J, Vic K2VCO, 12:19
- Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 12:10
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 12:07
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 12:01
- Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 11:46
- Re: [Amps] Maximum RF output in practical application: 4-250A, Administrator, 11:43
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Subich, W4TV, 11:02
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 10:54
- Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella, 10:27
- Re: [Amps] again, Joe Subich, W4TV, 10:21
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 10:07
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, R L Measures, 10:07
- Re: [Amps] how to estimate the Q of a tank circuit, R L Measures, 10:07
- Re: [Amps] again, R L Measures, 10:07
- Re: [Amps] 4CX10 000J, R L Measures, 10:07
- Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 09:37
- Re: [Amps] 4CX10,000J / Unwanted emissions, Steve Thompson, 09:21
- Re: [Amps] Maximum RF output in practical application: 4-250A, Tom W8JI, 08:32
- Re: [Amps] 4CX10,000J / Unwanted emissions, Mark Hill, 08:27
- Re: [Amps] again, Tom W8JI, 08:23
- Re: [Amps] GS35B Amp 15 m Situation, Mike, 07:56
- Re: [Amps] GS35B Amp 15 m Situation, Mike, 07:34
- Re: [Amps] GS35B Amp 15 m Situation, Tom W8JI, 07:19
- Re: [Amps] how to estimate the Q of a tank circuit, Tom W8JI, 07:01
- Re: [Amps] 4CX10 000J, Tom W8JI, 06:56
- Re: [Amps] Maximum RF output in practical application: 4-250A, Steve Thompson, 06:41
- Re: [Amps] again, Tom W8JI, 06:31
- Re: [Amps] Maximum RF output in practical application: 4-250A, zdtech, 06:27
- Re: [Amps] 4CX10 000J / Racal MA1723, sm0aom, 05:11
- Re: [Amps] Maximum RF output in practical application: 4-250A, sm0aom, 04:50
- Re: [Amps] Maximum RF output in practical application: 4-250A, sm0aom, 04:50
- Re: [Amps] again, Peter Chadwick, 04:31
- Re: [Amps] 4CX10 000J, Mark Hill, 04:26
- Re: [Amps] 4CX10 000J / Racal MA1723, Mark Hill, 04:19
- Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 04:06
- [Amps] how to estimate the Q of a tank circuit, Johan, 03:15
- Re: [Amps] Safety grounding - was Mains Isolation Transformer, Jim Brown, 02:50
- Re: [Amps] 4CX10 000J, Jan Erik Holm, 02:25
- Re: [Amps] 4CX10 000J, R L Measures, 00:41
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 00:41
- Re: [Amps] GS35B Amp 15 m Situation, Phil Clements, 00:32
- Re: [Amps] 4CX10 000J, zdtech, 00:31
July 02, 2006
- Re: [Amps] GS35B Amp 15 m Situation, Tony King - W4ZT, 23:55
- Re: [Amps] GS35B Amp 15 m Situation, Will Matney, 23:53
- [Amps] GS35B Amp 15 m Situation, Mike, 23:45
- Re: [Amps] again, Larry Carman, 14:24
- Re: [Amps] Maximum RF output in practical application: 4-250A, Jim Tonne, 14:13
- [Amps] W1XE, Bob Maser, 13:58
- [Amps] W1XE, Bob Maser, 13:35
- Re: [Amps] 4CX10 000J, Karl-Arne Markström, 13:09
- Re: [Amps] 4CX10 000J, Peter Voelpel, 12:27
- Re: [Amps] Maximum RF output in practical application: 4-250A, Bill L. Fuqua, 12:08
- Re: [Amps] 4CX10 000J, Jan Erik Holm, 11:55
- Re: [Amps] 4CX10 000J, Joe Subich, W4TV, 11:37
- Re: [Amps] again, Mike(W5UC) & Kathy(K5MWH), 11:22
- Re: [Amps] 4CX10 000J, Dr. David Kirkby, 11:04
- Re: [Amps] Maximum RF output in practical application: 4-250A, Vic K2VCO, 11:03
- Re: [Amps] 4CX10 000J, Peter Voelpel, 11:02
- Re: [Amps] 4CX10 000J, Joe Subich, W4TV, 10:44
- Re: [Amps] again, Roy Koeppe, 10:32
- Re: [Amps] Maximum RF output in practical application: 4-250A, Michael Tope, 10:03
- Re: [Amps] Ideal bandswitch brand for 3 kW out Amp?, R L Measures, 09:44
- Re: [Amps] Parasitcs, R L Measures, 09:44
- Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 09:43
- Re: [Amps] Again, Michael Tope, 08:27
- Re: [Amps] 70MHz transistor PA, schematics??, David Lisney, 08:27
- [Amps] Again, Mike(W5UC) & Kathy(K5MWH), 07:31
- Re: [Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk, 06:41
- Re: [Amps] Maximum RF output in practical application: 4-250A, Peter Chadwick, 06:02
- [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick, 05:53
- Re: [Amps] Ideal bandswitch brand for 3 kW out Amp?, Frank Goenninger, 05:24
- Re: [Amps] Parasitcs, Jan Erik Holm, 04:26
- [Amps] 4CX10 000J, pa3duv, 03:26
- Re: [Amps] 4-250A, W.F van Wyk, 02:31
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 00:11
July 01, 2006
- Re: [Amps] 70MHz transistor PA, schematics??, crawfish, 22:03
- [Amps] Collective Thank You for your help...., Ken, 21:15
- Re: [Amps] 70MHz transistor PA, schematics??, wc6w@juno.com, 18:22
- Re: [Amps] Maximum RF output in practical application: 4-250A, wc6w@juno.com, 18:22
- Re: [Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 16:46
- Re: [Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 16:21
- [Amps] Plate Load, Mike(W5UC) & Kathy(K5MWH), 16:07
- Re: [Amps] Serious transformer problem, John E . Cleeve, 16:00
- Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures, 15:25
- Re: [Amps] Serious transformer problem, Will Matney, 15:22
- Re: [Amps] Mains Isolation Transformer, Gudguyham, 15:17
- Re: [Amps] Mains Isolation Transformer, Tom W8JI, 15:10
- [Amps] 70MHz transistor PA, schematics??, Dick, 14:57
- Re: [Amps] Mains Isolation Transformer, Michael Tope, 14:09
- Re: [Amps] Mains Isolation Transformer, Jim Brown, 13:56
- Re: [Amps] Mains Isolation Transformer, David Lisney, 13:34
- Re: [Amps] Deja vu all over again, Gudguyham, 11:28
- Re: [Amps] Serious transformer problem, Gudguyham, 11:26
- Re: [Amps] Serious transformer problem, Administrator, 11:06
- [Amps] Parasitcs, Tom W8JI, 10:07
- Re: [Amps] Serious transformer problem, David C. Hallam, 09:39
- [Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk, 09:23
- Re: [Amps] IM distortion and such, k7fm, 09:16
- Re: [Amps] Deja vu all over again, Tom W8JI, 09:09
- Re: [Amps] Serious transformer problem, Tom W8JI, 09:02
- Re: [Amps] Deja vu all over again, Harold B. Mandel, 08:27
- Re: [Amps] Deja vu all over again, Gudguyham, 08:10
- [Amps] IM distortion and such, pa3duv, 07:31
- Re: [Amps] Serious transformer problem, John E. Cleeve, 07:27
- Re: [Amps] Serious transformer problem, Borislav Trifonov, 07:18
- Re: [Amps] Serious transformer problem, Tom W8JI, 06:45
- Re: [Amps] Serious transformer problem, Borislav Trifonov, 02:11
- Re: [Amps] Serious transformer problem, Will Matney, 01:19
- [Amps] Serious transformer problem, Borislav Trifonov, 00:10