In a message dated 7/1/2006 3:10:19 PM Eastern Daylight Time, w8ji@w8ji.com
writes:
There should be no power mains connection to the chassis,
even on the neutral wire. In the USA, if we run a 120V
transformer or blower in an amplifier or anything else,
there should be no path to the chassis or the safety grounds
for that blower or 120 transformer primary.
I have been trying to get this point across now for a long time, but some
people feel that "because it works" its OK to do regardless of what the NEC
says.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|