Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

October 31, 2010

Re: [TowerTalk] *UPDATE* For Sale: 130' Rohn 45G, Robin Midgett K4IDC, 15:02
Re: [TowerTalk] US Tower MA40 mast oops, Richard M. Gillingham, 14:50
[TowerTalk] US Tower MA40 mast oops, Kurt Cathcart, KR2C, 14:40
Re: [TowerTalk] Digital camera helps with reassembly, Bill Winkis, 05:07

October 30, 2010

Re: [TowerTalk] Digital camera helps with reassembly, Roger (K8RI), 20:16
Re: [TowerTalk] Ham IV rotor reassembly, Barry Gross, 19:21
Re: [TowerTalk] Digital camera helps with reassembly, Al Williams, 18:18
Re: [TowerTalk] Digital camera helps with reassembly, Chuck, 17:19
Re: [TowerTalk] Digital camera helps with reassembly, Mark Robinson, 17:03
[TowerTalk] Digital camera helps with reassembly, Ron W8RJL, 15:13
Re: [TowerTalk] Ham IV rotor reassembly, Barry Gross, 14:16
Re: [TowerTalk] Ham IV rotor reassembly, Roger (K8RI), 13:41
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 61, Eric Dobrowansky K2WD, 12:13
[TowerTalk] Shireen coax (again), Phil Snyder, 09:17
Re: [TowerTalk] Ham IV rotor reassembly, Barry Gross, 08:13
Re: [TowerTalk] Ham IV rotor reassembly, Barry Gross, 06:07
Re: [TowerTalk] Ham IV rotor reassembly, Barry Gross, 03:35

October 29, 2010

[TowerTalk] Ham IV rotor reassembly, Barry Gross, 15:57
[TowerTalk] dummy load for 2el vertical array dump power, Alfred Frugoli, 14:05
[TowerTalk] One Step Closer - Zoning Approved My Permit Application, Mickey Baker, 07:38

October 28, 2010

Re: [TowerTalk] sprinkler system control, Roger D Johnson, 18:58
[TowerTalk] Cushcraft Traps, Phil Snyder, 18:19
Re: [TowerTalk] sprinkler system control cable, Mark K5AM, 17:07
[TowerTalk] sprinkler system control, Tom_N2SR, 16:01
[TowerTalk] TET HB33SB, David Jordan, 11:04
[TowerTalk] [antenneX] 3 days left for 1/2-price book special, K7LXC, 09:00
Re: [TowerTalk] Concrete strength, Alan NV8A, 08:29
Re: [TowerTalk] Concrete strength, kr7x1, 08:04
Re: [TowerTalk] Erico Cadweld Oneshots, George Dubovsky, 06:18
[TowerTalk] Erico Cadweld Oneshots, Jim Hoge, 05:03
[TowerTalk] Concrete strength, Ed K0KL, 05:00

October 27, 2010

Re: [TowerTalk] Concrete Strength, Mike, 18:55
[TowerTalk] Crank up tower grounding, Andy, 16:19
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 56, Roger (K8RI), 16:01
Re: [TowerTalk] 204BA matching question, AA6DX - Mark, 15:33
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 56, Michael W5NIG, 15:22
Re: [TowerTalk] Concrete Strength, David Gilbert, 13:48
Re: [TowerTalk] Concrete Strength, David Gilbert, 13:42
[TowerTalk] At least all this wind was good for something., Roger (K8RI), 12:13
Re: [TowerTalk] Concrete Strength, kr7x1, 11:47
Re: [TowerTalk] Wind damage, Roger (K8RI), 11:23
Re: [TowerTalk] Wind damage, Mark Robinson, 10:59
[TowerTalk] Wind damage, n8de, 10:18
Re: [TowerTalk] Concrete Strength, David Gilbert, 10:07
Re: [TowerTalk] Next Question on the TX-472 - Winches, k2qmf, 09:52
[TowerTalk] Next Question on the TX-472 - Winches, Dan Bookwalter, 09:36
Re: [TowerTalk] Speaking of the Han Series of rotators...Howdoyoutell the difference., Brad Pioveson W9FX, 09:28
[TowerTalk] Old style foam 1-5/8" FHJ7 connectors, Peter Brush, 09:28
Re: [TowerTalk] 204BA matching question, Michael Ryan, 09:01
Re: [TowerTalk] Painting Antennas, Jim Hargrave, 08:29
Re: [TowerTalk] 204BA matching question, k2qmf, 08:01
Re: [TowerTalk] Concrete Strength, K7LXC, 07:16
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 54, Roger (K8RI), 07:08
Re: [TowerTalk] TX-472 Raising Fixture offset from tower, Alan Swinger, 06:42
Re: [TowerTalk] Concrete Strength, Mike, 06:37
Re: [TowerTalk] 204BA matching question, Wayne Kline, 05:32
[TowerTalk] Concrete Strength, Dan Bookwalter, 05:18
[TowerTalk] TX-472 Raising Fixture offset from tower, Dan Bookwalter, 05:15
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 54, Michael W5NIG, 04:44

October 26, 2010

Re: [TowerTalk] Painting Antennas, Robert Harmon, 22:15
[TowerTalk] Painting Antennas, RLVZ, 21:52
Re: [TowerTalk] Painting Antennas, Jim Hargrave, 21:26
Re: [TowerTalk] Speaking of the HAMSeriesofrotators...How doyoutell the difference., Roger (K8RI), 20:51
Re: [TowerTalk] Speaking of the HAMSeriesofrotators...How doyoutell the difference., Roger (K8RI), 20:46
Re: [TowerTalk] Speaking of the HAM Seriesofrotators...How doyoutell the difference., David Thompson, 20:20
Re: [TowerTalk] Speaking of the HAM Seriesofrotators...How doyoutell the difference., Joe Subich, W4TV, 19:49
[TowerTalk] Painting Antennas, Robert Harmon, 19:35
Re: [TowerTalk] Likely repairs for a US Tower HDX589MDPL crank-up tower?, Mat Eshpeter, 19:18
[TowerTalk] 204BA matching question, Mark, K5ER, 19:17
Re: [TowerTalk] Resonant boom, john, 18:44
Re: [TowerTalk] Speaking of the HAM Seriesofrotators...How doyoutell the difference., Don Tucker, 17:44
Re: [TowerTalk] Alpha Delta Transi-Trap ?, Clint Talmadge W5CPT, 17:28
Re: [TowerTalk] Alpha Delta Transi-Trap ?, Jim McDonald, 17:14
Re: [TowerTalk] Alpha Delta Transi-Trap ?, Terry Dunlap, 17:01
[TowerTalk] Alpha Delta Transi-Trap ?, Clint Talmadge W5CPT, 16:51
Re: [TowerTalk] Speaking of the HAM Seriesofrotators...How doyoutell the difference., Roger (K8RI), 16:26
Re: [TowerTalk] Speaking of the Han Series of rotators...Howdoyoutell the difference., Roger (K8RI), 16:20
Re: [TowerTalk] Speaking of the HAM Series ofrotators...How doyoutell the difference., Joe Subich, W4TV, 15:15
[TowerTalk] HAM M Type Rotor Info., N7KA, 14:32
Re: [TowerTalk] Speaking of the Han Series of rotators...Howdoyoutell the difference., Roger (K8RI), 14:29
Re: [TowerTalk] Speaking of the HAM Series ofrotators...How doyoutell the difference., Roger (K8RI), 14:29
Re: [TowerTalk] Speaking of the Han Series of rotators...How doyoutell the difference., Joe Subich, W4TV, 13:56
Re: [TowerTalk] Speaking of the HAM Series of rotators...How doyoutell the difference., n8de, 13:53
[TowerTalk] Utica, NY Commercial Tower Accident, AA6DX - Mark, 13:49
Re: [TowerTalk] Speaking of the Han Series of rotators...How doyoutell the difference., Roger (K8RI), 13:46
Re: [TowerTalk] Speaking of the Han Series of rotators...How doyou tell the difference., Roger (K8RI), 13:19
Re: [TowerTalk] Likely repairs for a US Tower HDX589MDPL crank-up tower?, K7LXC, 07:48
Re: [TowerTalk] Speaking of the Han Series of rotators...How do you tell the difference., Joe Subich, W4TV, 07:24
Re: [TowerTalk] Speaking of the Han Series of rotators...How do you tell the difference., Todd Coulter, 02:34

October 25, 2010

[TowerTalk] Speaking of the Han Series of rotators...How do you tell the difference., Roger (K8RI), 23:07
Re: [TowerTalk] Likely repairs for a US Tower HDX589MDPL crank-up tower?, Don Tucker, 22:55
Re: [TowerTalk] Fw: Likely repairs for a US Tower HDX589MDPL crank-uptower?, ROBERT HARMON, 21:33
[TowerTalk] 5 x conductor rotor cable ?, Jim Thomson, 21:13
[TowerTalk] Fw: Likely repairs for a US Tower HDX589MDPL crank-uptower?, Perry, 21:08
[TowerTalk] Tower accident Near Utica NY, Rick Ellison, 20:52
Re: [TowerTalk] Likely repairs for a US Tower HDX589MDPL crank-up tower?, ROBERT HARMON, 20:06
Re: [TowerTalk] Rope Snubbers, Grant Saviers, 20:05
[TowerTalk] Likely repairs for a US Tower HDX589MDPL crank-up tower?, Mat Eshpeter, 19:30
Re: [TowerTalk] Rope Snubbers, Adam Shirley WJ4X, 19:09
[TowerTalk] Is there any difference between a Ham4 VS T2X controller?, Brahmangou, 18:46
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 47, Ro Grrr, 18:07
[TowerTalk] Rope Snubbers, Don Tucker, 16:58
Re: [TowerTalk] Now there is a tower and rotator! (Updated), Roger (K8RI), 16:56
Re: [TowerTalk] 5 x conductor rotor cable ?, jimlux, 15:48
Re: [TowerTalk] 5 x conductor rotor cable ?, john, 14:31
[TowerTalk] *Potentially* For Sale: 130' Rohn 45G, Robin Midgett, 13:49
Re: [TowerTalk] TOWER METALS, Mickey Baker, 13:28
Re: [TowerTalk] 5 x conductor rotor cable ?, Rick Karlquist, 12:20
Re: [TowerTalk] Is there any difference between a Ham4 VS T2X controller?, k6ye, 11:27
Re: [TowerTalk] Is there any difference between a Ham4 VS T2X controller?, TexasRF, 10:37
Re: [TowerTalk] Is there any difference between a Ham4 VS T2X controller?, n8de, 10:19
Re: [TowerTalk] 5 x conductor rotor cable ?, Jim Brown, 09:59
[TowerTalk] Is there any difference between a Ham4 VS T2X controller?, Brahmangou, 09:43
Re: [TowerTalk] 5 x conductor rotor cable ?, Jim Hargrave, 09:24
[TowerTalk] TOWER METALS, K0DAN, 09:01
Re: [TowerTalk] 5 x conductor rotor cable ?, TexasRF, 08:30
Re: [TowerTalk] 5 x conductor rotor cable ?, Adam Shirley WJ4X, 07:37
Re: [TowerTalk] 5 x conductor rotor cable ?, Mark Robinson, 07:27
[TowerTalk] 5 x conductor rotor cable ?, Jim Thomson, 07:16

October 24, 2010

Re: [TowerTalk] Resonant boom, john, 20:29
Re: [TowerTalk] Resonant boom, Stan Stockton, 19:59
[TowerTalk] Resonant boom, Jim Thomson, 19:22
[TowerTalk] Now there is a tower and rotator!, Roger (K8RI), 18:48
Re: [TowerTalk] VHF 4 Bay Dipole Pattern, Dan Cisson, 16:20
Re: [TowerTalk] W0ANT question on backyard radials, n8de, 15:15
[TowerTalk] W0ANT question on backyard radials, \(N0AH\) Bryon \"Paul\" Veal, 15:12
Re: [TowerTalk] Resonant boom, john, 14:21
Re: [TowerTalk] Building permit Wichita Kansas, Howard K2HK, 09:24
Re: [TowerTalk] Resonant boom, Stan Stockton, 08:58
Re: [TowerTalk] Building permit Wichita Kansas, Mickey Baker, 08:45
Re: [TowerTalk] VHF 4 Bay Dipole Pattern, Blake Bowers, 08:23
[TowerTalk] VHF 4 Bay Dipole Pattern, Clint Talmadge W5CPT, 08:04
Re: [TowerTalk] Resonant boom, john, 08:03
Re: [TowerTalk] Sealing Coax Connector, Kelly Taylor, 06:02
Re: [TowerTalk] Resonant boom, TexasRF, 05:34
Re: [TowerTalk] Resonant boom, DF3KV, 03:00

October 23, 2010

Re: [TowerTalk] Resonant boom, Stan Stockton, 23:26
Re: [TowerTalk] Building permit Wichita Kansas, Ryan Jairam, 21:58
Re: [TowerTalk] Resonant boom, Ron W8RJL, 21:23
[TowerTalk] Resonant boom, Jim Thomson, 21:10
Re: [TowerTalk] Resonant boom, David Gilbert, 20:37
[TowerTalk] GS-23 180 Degrees Off, Doug Rehman, 20:07
Re: [TowerTalk] Sealing Coax Connector, Roger (K8RI), 19:05
[TowerTalk] Resonant boom, Stan Stockton, 18:04
Re: [TowerTalk] Power Over Coax, K1TTT, 17:11
Re: [TowerTalk] Power Over Coax, David Gilbert, 17:00
[TowerTalk] Power Over Coax, Kipton Moravec, 16:41
Re: [TowerTalk] Building permit Wichita Kansas, Jeff Draughn, 13:40
Re: [TowerTalk] Sealing Coax Connector, Hector Garcia XE2K, 12:51
Re: [TowerTalk] stainless screws online store, Felipe Ceglia, 12:29
Re: [TowerTalk] Sealing Coax Connector, K1TTT, 12:18
Re: [TowerTalk] External Receive Antenna Switch, Todd, 11:48
Re: [TowerTalk] Sealing Coax Connector, K7LXC, 10:23

October 22, 2010

Re: [TowerTalk] stainless screws online store, Roger (K8RI), 22:36
Re: [TowerTalk] Bringing feedlines through the floor, Roger (K8RI), 22:31
Re: [TowerTalk] Bringing feedlines through the floor, W2RU - Bud Hippisley, 19:37
Re: [TowerTalk] Building permit Wichita Kansas, K0DAN, 17:00
Re: [TowerTalk] Bringing feedlines through the floor, Dan Evans, 16:50
Re: [TowerTalk] stainless screws online store, Les Kalmus, 12:40
Re: [TowerTalk] stainless screws online store, Ryan Jairam, 12:11
Re: [TowerTalk] stainless screws online store, JWKIMBALL, 11:47
Re: [TowerTalk] stainless screws online store, Mark Robinson, 11:36
[TowerTalk] stainless screws online store, Felipe Ceglia, 11:30
[TowerTalk] Building permit Wichita Kansas, jdraughn1, 09:10
Re: [TowerTalk] Bringing feedlines through the floor, TexasRF, 07:21
Re: [TowerTalk] Bringing feedlines through the floor, Mickey Baker, 06:32
Re: [TowerTalk] Bringing feedlines through the floor, K1TTT, 04:47

October 21, 2010

Re: [TowerTalk] Bringing feedlines through the floor, Mark Robinson, 21:20
Re: [TowerTalk] Bringing feedlines through the floor, n8de, 19:50
Re: [TowerTalk] Bringing feedlines through the floor, Roger (K8RI), 18:17
[TowerTalk] Bringing feedlines through the floor, Dan Evans, 17:48
Re: [TowerTalk] SPG Panels/feedthroughs etc, Roger (K8RI), 14:40
[TowerTalk] External Receive Antenna Switch, Phil & Debbie Salas, 13:31
Re: [TowerTalk] SPG panels/feedthroughs etc, charlie, 13:25
Re: [TowerTalk] SPG panels/feedthroughs etc, Rob Atkinson, 11:57
Re: [TowerTalk] Fulton K-1550 winch, Guy Molinari, 09:15
Re: [TowerTalk] External Receive Antenna Switch, Richard (Rick) Karlquist, 08:33
Re: [TowerTalk] SPG Panels/feedthroughs etc, Pete Smith, 08:26
Re: [TowerTalk] SPG Panels/feedthroughs etc, jimlux, 07:22
[TowerTalk] External Receive Antenna Switch, Jim Thomson, 06:51
Re: [TowerTalk] External Receive Antenna Switch, Kenneth Goodwin, 06:46
Re: [TowerTalk] SPG Panels/feedthroughs etc, n8de, 06:06
Re: [TowerTalk] SPG Panels/feedthroughs etc, Wayne Kline, 05:38
[TowerTalk] SPG Panels/feedthroughs etc, charlie, 05:29

October 20, 2010

Re: [TowerTalk] Fulton K-1550 winch, Ian White GM3SEK, 23:30
Re: [TowerTalk] External Receive Antenna Switch, Roger (K8RI), 22:35
Re: [TowerTalk] TR-44 Rotator Question, Roger (K8RI), 19:34
Re: [TowerTalk] Tower Junction Box, Les Kalmus, 19:20
Re: [TowerTalk] External Receive Antenna Switch, Joe Subich, W4TV, 19:07
Re: [TowerTalk] TR-44 Rotator Question, Iain MacDonnell - N6ML, 18:50
Re: [TowerTalk] Fulton K-1550 winch, Guy Molinari, 18:08
[TowerTalk] TR-44 Rotator Question, Dan Schaaf, 17:58
[TowerTalk] External Receive Antenna Switch, Richard Solomon, 17:55

October 19, 2010

Re: [TowerTalk] Fwd: Bamboo Spreaders, Tom Osborne, 21:09
Re: [TowerTalk] Fulton K-1550 winch, Guy Molinari, 21:02
[TowerTalk] Fwd: Bamboo Spreaders, hanslg, 21:02
Re: [TowerTalk] Fulton K-1550 winch, Al Williams, 21:01
Re: [TowerTalk] Recent model motorized LM470/354, Al Williams, 20:55
Re: [TowerTalk] Fulton K-1550 winch, Dave Hachadorian, 20:55
Re: [TowerTalk] Fulton K-1550 winch, Dino Darling, 20:34
Re: [TowerTalk] Fulton K-1550 winch, Al Williams, 20:15
[TowerTalk] Recent model motorized LM470/354, Timothy Coker, 20:02
[TowerTalk] Fulton K-1550 winch, Guy Molinari, 19:36
Re: [TowerTalk] Tower Junction Box, john, 17:10
Re: [TowerTalk] Hy-Gain rotor controllers cabling, Jim Hargrave, 12:39
Re: [TowerTalk] Hy-Gain rotor controllers cabling, Roger (K8RI), 10:21
Re: [TowerTalk] Tower Junction Box, Adam Shirley WJ4X, 09:57
[TowerTalk] Tower Junction Box, Les Kalmus, 09:21
Re: [TowerTalk] Hy-Gain rotor controllers cabling, Don Tucker, 08:24
Re: [TowerTalk] Hy-Gain rotor controllers cabling, Barry Gross, 07:23
[TowerTalk] Hy-Gain rotor controllers cabling, Barry Gross, 04:30

October 18, 2010

[TowerTalk] question, Tower TH472, Joe Cayman, 19:55
[TowerTalk] header intact, Dan Hearn, 18:27
Re: [TowerTalk] Idiom Press is alive and well, Tony Brock-Fisher, 16:58
Re: [TowerTalk] Search of San Antonio TX galvanizer, Jim Hargrave, 12:59
[TowerTalk] Search of San Antonio TX galvanizer, Hector Garcia XE2K, 09:12

October 17, 2010

[TowerTalk] Idiom Press is alive and well, Mike, 16:46
[TowerTalk] Idiom Press is alive and well, k2mme@juno.com, 15:56
Re: [TowerTalk] Bamboo Spreaders, WA3GIN, 15:54
Re: [TowerTalk] Bamboo Spreaders, Rich, 15:02
Re: [TowerTalk] Force 12 EF515, Roger (K8RI), 12:32
[TowerTalk] Bamboo Spreaders, WA3GIN, 11:41
[TowerTalk] Force 12 EF515, Georgens, Tom, 06:09
[TowerTalk] New antenna, Jan Erik Holm, 01:41

October 15, 2010

Re: [TowerTalk] Gin Pole, Michael Ryan, 14:20
[TowerTalk] Gin Pole, Dan Cisson, 14:01
[TowerTalk] FW: FW: [Elecraft] Amplifier Cable:K3 to Alpha 8410, Tommy Alderman, 13:26
[TowerTalk] FW: [Elecraft] Amplifier Cable:K3 to Alpha 8410, Tommy Alderman, 12:49
Re: [TowerTalk] Yaesu g-800s, W5KI, 11:26
Re: [TowerTalk] guy cable use, K7LXC, 10:59
Re: [TowerTalk] guy cable use., Mark Robinson, 08:31
Re: [TowerTalk] guy cable use., Roger (K8RI), 06:34
Re: [TowerTalk] guy cable use., Mark Robinson, 06:32
Re: [TowerTalk] guy cable use., K1TTT, 05:15
Re: [TowerTalk] Sealing Coax Connector, Michael Germino, 05:02
[TowerTalk] guy cable use., Richard Beckett, 05:02
Re: [TowerTalk] Sealing Coax Connector, Orcena Lyle, 05:02
[TowerTalk] Yaesu g-800s, Martin Staffa, 04:43

October 14, 2010

Re: [TowerTalk] Protecting Fiberglass Antennas Parts, Roger (K8RI), 20:08
[TowerTalk] Crimped PL-259's, Jim Thomson, 20:03
Re: [TowerTalk] Remote control of elevation/lowering, jimlux, 17:34
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 24, Sandy Taylor, 17:20
Re: [TowerTalk] Protecting Buried Guy Anchors and Tower Sections, Mark Robinson, 16:44
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 28, Michael Goins, 16:22
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 28, Ro Grrr, 16:19
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 24, Kurt Cathcart, KR2C, 16:08
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 24, Ro Grrr, 15:53
Re: [TowerTalk] (no subject), Dan Cisson, 15:48
Re: [TowerTalk] OT: Satellite Internet, Marlon K. Schafer, 15:40
[TowerTalk] US Towers concrete bolt specifications, Craig Brammer, 15:25
Re: [TowerTalk] Protecting Buried Guy Anchors and Tower Sections, Ian White GM3SEK, 15:14
Re: [TowerTalk] Crimped PL-259's, Kenneth Goodwin, 15:12
Re: [TowerTalk] : Trade IC-746 for TS-850SAT??? NOPE, Daniel Hileman, 15:09
Re: [TowerTalk] : Trade IC-746 for TS-850SAT??? NOPE, K7LXC, 15:02
[TowerTalk] What a shame!, Warrenwolff, 14:34
Re: [TowerTalk] Crimped PL-259's, Les Kalmus, 14:28
Re: [TowerTalk] Trade IC-746 for TS-850SAT???, Gene Fuller, 14:13
Re: [TowerTalk] Trade IC-746 for TS-850SAT???, Gene Fuller, 14:12
[TowerTalk] Trade IC-746 for TS-850SAT???, Daniel Hileman, 13:45
[TowerTalk] Crimped PL-259's, Jim Thomson, 13:23
Re: [TowerTalk] Remote control of elevation/lowering, Rick Karlquist, 13:20
Re: [TowerTalk] Crimped PL-259's, Blake Bowers, 13:03
Re: [TowerTalk] Remote control of elevation/lowering, Bill NY9H, 12:46
[TowerTalk] Crimped PL-259's, Jim Thomson, 12:32
Re: [TowerTalk] Remote control of elevation/lowering, jimlux, 11:59
Re: [TowerTalk] Crimped PL-259's, jimlux, 11:54
Re: [TowerTalk] Crimped PL-259's, jimlux, 11:51
Re: [TowerTalk] Crimped PL-259's, Mark Robinson, 11:35
Re: [TowerTalk] Crimped PL-259's, Jim Brown, 11:30
Re: [TowerTalk] Remote control of elevation/lowering, Mark Robinson, 11:25
Re: [TowerTalk] Remote control of elevation/lowering, Mickey Baker, 11:20
Re: [TowerTalk] Sealing Coax Connector, Tom Osborne, 11:19
Re: [TowerTalk] Sealing Coax Connector, Roger D Johnson, 11:16
Re: [TowerTalk] Sealing Coax Connector, Todd Coulter, 11:06
[TowerTalk] Remote control of elevation/lowering, Fred Serota, 11:01
Re: [TowerTalk] Sealing Coax Connector, Roger (K8RI), 10:48
Re: [TowerTalk] Sealing Coax Connector, Ryan Jairam, 10:42
Re: [TowerTalk] Crimped PL-259's, Roger (K8RI), 10:42
Re: [TowerTalk] Crimped PL-259's, Perry - K4PWO, 10:35
Re: [TowerTalk] Sealing Coax Connector, Richard Solomon, 10:32
Re: [TowerTalk] Crimped PL-259's, Roger (K8RI), 10:30
Re: [TowerTalk] Sealing Coax Connector, bob finger, 10:26
Re: [TowerTalk] Sealing Coax Connector, Gene Fuller, 10:20
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 20, Roger (K8RI), 09:59
Re: [TowerTalk] Sealing Coax Connector, Greg - AB7R, 09:59
Re: [TowerTalk] Sealing Coax Connector, Mark Robinson, 09:56
Re: [TowerTalk] Sealing Coax Connector, Todd Coulter, 09:48
Re: [TowerTalk] Sealing Coax Connector, Mark Robinson, 09:46
[TowerTalk] Sealing Coax Connector, Richard Solomon, 09:40
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, David Gilbert, 09:33
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, David Gilbert, 09:24
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, Gary Schafer, 09:22
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 20, David Gilbert, 09:18
Re: [TowerTalk] Crimped PL-259's, David Kaplan, 08:55
Re: [TowerTalk] Crimped PL-259's, Ryan Jairam, 08:54
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, Mike & Becca Krzystyniak, 08:46
Re: [TowerTalk] Crimped PL-259's, Tommy Alderman, 08:43
Re: [TowerTalk] Crimped PL-259's, Jim Brown, 08:41
Re: [TowerTalk] Crimped PL-259's, Tommy Alderman, 08:40
Re: [TowerTalk] Crimped PL-259's, Tod - ID, 08:21
Re: [TowerTalk] Protecting Buried Guy Anchors and Tower Sections, Mark Robinson, 07:51
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, Mike, 07:50
Re: [TowerTalk] Crimped PL-259's, Blake Bowers, 07:46
Re: [TowerTalk] Protecting Fiberglass Antennas Parts, Mark Robinson, 07:43
Re: [TowerTalk] Protecting Buried Guy Anchors and Tower Sections, Michael Ryan, 07:42
[TowerTalk] Protecting Fiberglass Antennas Parts, Joseph W. Morgan, 07:39
Re: [TowerTalk] Crimped PL-259's, Ryan Jairam, 07:30
[TowerTalk] Crimped PL-259's, Kenneth Goodwin, 07:20
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 20, Mark Robinson, 07:04
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 20, Mickey Baker, 06:28
[TowerTalk] Protecting Buried Guy Anchors and Tower Sections, Mark Robinson, 06:17
[TowerTalk] Protecting Buried Guy Anchors, Jim Thomson, 03:37
[TowerTalk] Sigma 280-S, Jim Thomson, 02:56

October 13, 2010

[TowerTalk] Parasitic Traps on a TH3, Thomas Johnson, 19:10
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 20, Ro Grrr, 18:33
[TowerTalk] (no subject), cqtestk4xs, 18:12
Re: [TowerTalk] Rotor Shelf Maintenance, Mark Robinson, 18:05
[TowerTalk] Hy-Gain rotator bearing positioning, Roger (K8RI), 17:56
Re: [TowerTalk] Rotor Shelf Maintenance, Roger (K8RI), 17:51
Re: [TowerTalk] Yaesu Repairs, Gary \"Joe\" Mayfield, 16:28
[TowerTalk] Protecting Buried Guy Anchors, Mark Robinson, 15:52
Re: [TowerTalk] Protecting Buried Guy Anchors, Tony Brock-Fisher, 15:14
Re: [TowerTalk] Protecting Buried Guy Anchors, Don Moman VE6JY, 15:08
[TowerTalk] Protecting Buried Guy Anchors, Mark Robinson, 14:35
Re: [TowerTalk] Rotor Shelf Maintenance, Jim Hoge, 14:14
[TowerTalk] Rotor Shelf Maintenance, Charles Mills, 13:34
Re: [TowerTalk] Ran Short of Concrete, Don Moman VE6JY, 10:50
Re: [TowerTalk] Ran Short of Concrete, fred . spinner, 10:28
Re: [TowerTalk] Ran Short of Concrete, fred . spinner, 10:05
Re: [TowerTalk] Yaesu Repairs - NOT, K7LXC, 08:40
Re: [TowerTalk] Yaesu Repairs, David Jordan, 08:01
Re: [TowerTalk] Yaesu Repairs, Roger (K8RI), 07:20
[TowerTalk] Yaesu Repairs, Glen Turner, 07:08
[TowerTalk] Sigma 280-S, Jim Thomson, 05:43

October 12, 2010

Re: [TowerTalk] Sigma 180-S / 280-S, Grant Saviers, 23:25
Re: [TowerTalk] Ran Short of Concrete, Roger (K8RI), 19:28
Re: [TowerTalk] Ran Short of Concrete, john, 18:15
Re: [TowerTalk] Ran Short of Concrete, Mickey Baker, 16:57
[TowerTalk] Ran Short of Concrete, Steve Bagley, 16:31

October 11, 2010

Re: [TowerTalk] Sigma 180-S / 280-S, john, 19:19
Re: [TowerTalk] Sigma 180-S / 280-S, TexasRF, 08:27
[TowerTalk] Tennadyne T6, Frosty, 07:40
[TowerTalk] Sigma 180-S / 280-S, Jim Thomson, 07:11

October 10, 2010

Re: [TowerTalk] Cushcraft AP8 Vertical, Ron W8RJL, 18:58
[TowerTalk] Cushcraft AP8 Vertical, Ron W8RJL, 18:16
[TowerTalk] early 70's tower, Benson, 13:21
Re: [TowerTalk] balun beads for 9913, Jim Brown, 13:03
Re: [TowerTalk] balun beads for 9913, Jim Brown, 11:20
Re: [TowerTalk] balun beads for 9913, Jim Brown, 11:06
Re: [TowerTalk] balun beads for 9913, Grant Saviers, 09:29
[TowerTalk] HDX-555, Phil Snyder, 08:33
[TowerTalk] balun beads for 9913, Jim Thomson, 05:26
Re: [TowerTalk] [Tower Talk] balun beads for 9913, Jim Brown, 00:33

October 09, 2010

[TowerTalk] Min spacing to 80m yagi ?, Jim Thomson, 20:01
[TowerTalk] Bolts, cqtestk4xs, 16:03
Re: [TowerTalk] [Tower Talk] balun beads for 9913, jimlux, 13:09
[TowerTalk] [Tower Talk] balun beads for 9913, Dan, 12:51
[TowerTalk] early 70's tower, Benson, 11:21

October 08, 2010

[TowerTalk] Question on US Towers TRX-80 Raising Fixture, Larry WA9VRH, 14:37
[TowerTalk] Retracting crankup tower in horizontal position, AA6DX - Mark, 12:33
Re: [TowerTalk] Retracting crankup tower in horizontal position, Ed Magnuson, 10:45
Re: [TowerTalk] Retracting crankup tower in horizontal position, Don Tucker, 10:25
Re: [TowerTalk] Retracting crankup tower in horizontal position, KJ6Y, 09:37
Re: [TowerTalk] Retracting crankup tower in horizontal position, Richard Karlquist, 09:29
[TowerTalk] Sommer Beam, Wilson Lamb, 09:09
Re: [TowerTalk] Protecting Control Lines, Steve, W3AHL, 08:33
Re: [TowerTalk] Protecting Control Lines, Perry - K4PWO, 08:27
Re: [TowerTalk] shunt fed tower and dipole interaction, Drax Felton, 08:11
Re: [TowerTalk] Retracting crankup tower in horizontal position, Mike, 07:15
[TowerTalk] Retracting crankup tower in horizontal position, Dan Bookwalter, 06:48
[TowerTalk] shunt fed tower and dipole interaction, Gary Slagel, 06:44
Re: [TowerTalk] Protecting Control Lines, Mark Robinson, 05:53
Re: [TowerTalk] Protecting Control Lines, Pete Smith, 03:46

October 07, 2010

[TowerTalk] Protecting Control Lines, Mickey Baker, 21:14
Re: [TowerTalk] Sommer, Hans Oortman, 14:33
[TowerTalk] Sommer, Tom Mandera, 13:59
Re: [TowerTalk] Summer Log Perodic, EZ Rhino, 12:35
Re: [TowerTalk] Summer Log Perodic, n8de, 12:22
Re: [TowerTalk] Summer Log Perodic, Steve Katz, 11:48
[TowerTalk] Summer Log Perodic, Joseph Contogenis, 11:41

October 06, 2010

[TowerTalk] Gary AB0TW's tower ID, David Thompson, 22:58
[TowerTalk] I need charts for old Tristao Guyed crank ups, David Thompson, 22:51
Re: [TowerTalk] Min spacing to 80m yagi ?, TexasRF, 19:43
Re: [TowerTalk] Min spacing to 80m yagi ?, DF3KV, 19:33
Re: [TowerTalk] Min spacing to 80m yagi ?, john, 14:58
Re: [TowerTalk] Min spacing to 80m yagi ?, GALE STEWARD, 13:20
Re: [TowerTalk] Min spacing to 80m yagi ?, Roger (K8RI), 12:26
Re: [TowerTalk] Min spacing to 80m yagi ?, GALE STEWARD, 08:55
Re: [TowerTalk] Tower Detuning, Mark Robinson, 08:48
[TowerTalk] Need small prop pitch motor, Larry Pignolet, 06:24
Re: [TowerTalk] Min spacing to 80m yagi ?, Jim Thomson, 06:18
Re: [TowerTalk] Min spacing to 80m yagi ?, TexasRF, 05:49
[TowerTalk] Min spacing to 80m yagi ?, Jim Thomson, 05:34

October 05, 2010

Re: [TowerTalk] Tower Detuning, Roger (K8RI), 20:29
Re: [TowerTalk] Tower Detuning, Mark Robinson, 17:10
[TowerTalk] OLD Tower -- TriEx THD-471, n7ert.jody, 14:44
Re: [TowerTalk] Tower Detuning, David Gilbert, 12:59
Re: [TowerTalk] Tower Detuning, Jim Brown, 12:16
Re: [TowerTalk] Tower Detuning, Michael Baker, 11:33
Re: [TowerTalk] Tower Detuning, Jim Brown, 11:02
Re: [TowerTalk] Tower Detuning, David Gilbert, 10:10
Re: [TowerTalk] Tower Detuning, Jim Brown, 09:29

October 04, 2010

Re: [TowerTalk] Bolts for Rohn 55 and 65, Mark Robinson, 19:14
Re: [TowerTalk] Bolts for Rohn 55 and 65, Stan Stockton, 18:34
Re: [TowerTalk] Bolts for Rohn 55 and 65, Mark Robinson, 17:38
Re: [TowerTalk] Tower Detuning, Jeffrey Okamitsu, 17:22
[TowerTalk] Bolts for Rohn 55 and 65, cqtestk4xs, 17:20
Re: [TowerTalk] Tower Detuning, Michael Baker, 15:00
[TowerTalk] Tower Detuning, Mike Wetzel, 14:54
Re: [TowerTalk] Yaesu G-800DXA Rotor, Pete Smith, 03:19

October 03, 2010

[TowerTalk] TowerTalk Digest, Vol 94, Issue 4, Tom Ed Moore-k5bm, 15:53
[TowerTalk] Yaesu G-800DXA Rotor, Kelley Shaddrick, 14:43
[TowerTalk] Rohn 45, Mike Fatchett W0MU, 11:30

October 02, 2010

Re: [TowerTalk] Clamp Bolts for M2 OR2800?, Les Kalmus, 19:14
[TowerTalk] Clamp Bolts for M2 OR2800?, Rich Hallman - N7TR, 18:42
Re: [TowerTalk] TowerTalk Digest, Vol 94, Issue 1 help identifying my old tower., gallen35, 14:30
Re: [TowerTalk] Impedance matching dilemma - 80M Inverted L, Al Williams, 13:05
Re: [TowerTalk] Impedance matching dilemma - 80M Inverted L, Drax Felton, 12:45
Re: [TowerTalk] Impedance matching dilemma - 80M Inverted L, David Gilbert, 08:50
[TowerTalk] Impedance matching dilemma - 80M Inverted L, w3sb, 08:02

October 01, 2010

Re: [TowerTalk] has anybody had a live contact with IdiomPress lately?, pfizenmayer, 18:35
Re: [TowerTalk] has anybody had a live contact with Idiom Press lately?, Jim McDonald, 17:12
Re: [TowerTalk] has anybody had a live contact with Idiom Press lately?, EZ Rhino, 17:02
Re: [TowerTalk] Help identify old tower, David Thompson, 13:45
Re: [TowerTalk] Which rotator CDE HAM-III or Yaesu G-1000DXA?, Roger (K8RI), 10:25
Re: [TowerTalk] Which rotator CDE HAM-III or Yaesu G-1000DXA?, Martin Sole, 08:15
[TowerTalk] Which rotator CDE HAM-III or Yaesu G-1000DXA?, Mickey Baker, 07:56
Re: [TowerTalk] Yaesu GS-23, K1TTT, 07:30
[TowerTalk] Yaesu GS-23, Doug Rehman, 07:22
[TowerTalk] F-12 Drop in cradle mount, Jim Thomson, 02:56