Towertalk
[Top] [All Lists]

Re: [TowerTalk] Resonant boom

To: Stan Stockton <k5go@cox.net>
Subject: Re: [TowerTalk] Resonant boom
From: Stan Stockton <k5go@cox.net>
Date: Sun, 24 Oct 2010 01:26:14 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks for all the responses!  Still looking for something I can do,  
even temporarily, without taking it down.

Thanks...Stan, K5GO

Sent from Stan's IPhone



On Oct 23, 2010, at 8:04 PM, Stan Stockton <k5go@cox.net> wrote:

> Anyone by chance have an easier to accomplish idea other than one I
> remember being suggested to someone else with a similar problem -
> fishing a wire through a hole near the center of the boom and letting
> it hang out the end.  I can watch the SWR on my 40 meter antenna go
> from 1.2/1 to 2.0/1 just by turning the rotatable 40m Yagi or the 20m
> Yagi which is about 175 feet away and 65 feet lower.  Boom is 65 feet
> and elements are insulated.
>
> Lesson learned on boom lengths...
>
> I would prefer to fix it with the least amount of work.  I can
> probably do the wire thing on one side but not the other due to an
> weight-balance obstruction.  Hate to have about 15 feet of wire
> hanging out if the back of the boom.
>
> Thanks...Stan, K5GO
>
> Sent from Stan's IPhone
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>