Re: [Amps] Clipperton L suggestion, Danny Pease, 2010/10/31

• Re: [Amps] Clipperton L suggestion, Larry, 2010/10/31
  • Re: [Amps] Clipperton L suggestion, Alek Petkovic, 2010/10/31
    • Re: [Amps] Clipperton L suggestion, Larry, 2010/10/31
    • Re: [Amps] Clipperton L suggestion, Mitch Cox, 2010/10/31

[Amps] Suggestions - I broke my amp, Larry, 2010/10/30

• Re: [Amps] Suggestions - I broke my amp, Roger (K8RI), 2010/10/30
• Message not available
  • Re: [Amps] Suggestions - I broke my amp, Larry, 2010/10/31

[Amps] Rectifier Noise, kb5gt@cableone.net, 2010/10/30

• Re: [Amps] Rectifier Noise, Fuqua, Bill L, 2010/10/30

Re: [Amps] Amps Digest, Vol 94, Issue 60, Mike Saculla, 2010/10/30

• Re: [Amps] Amps Digest, Vol 94, Issue 60, Jeff Blaine, 2010/10/30

[Amps] Do you think he'll get it?, Roger (K8RI), 2010/10/30

• Re: [Amps] Do you think he'll get it?, Paul Christensen, 2010/10/30
  • Re: [Amps] Do you think he'll get it?, Jeff Blaine, 2010/10/30
    • Re: [Amps] Do you think he'll get it?, Roger (K8RI), 2010/10/30
    • Re: [Amps] Do you think he'll get it?, Paul Christensen, 2010/10/30
    • Re: [Amps] Do you think he'll get it?, Carl, 2010/10/31
    • Re: [Amps] Do you think he'll get it?, Jeff Blaine, 2010/10/30
    • [Amps] DTR-2000L, Charles Harpole, 2010/10/30
    • Re: [Amps] DTR-2000L, Carl, 2010/10/31
  • Message not available
    • Re: [Amps] Do you think he'll get it?, Paul Christensen, 2010/10/30
    • Re: [Amps] Do you think he'll get it?, Carl, 2010/10/31
• Re: [Amps] Do you think he'll get it?, Roger D Johnson, 2010/10/30
  • Re: [Amps] Do you think he'll get it?, Paul Christensen, 2010/10/30

[Amps] HV rectifier strings - to bypass or not?, Jim Barber, 2010/10/30

• Re: [Amps] HV rectifier strings - to bypass or not?, Ken Brown, 2010/10/30
  • Re: [Amps] HV rectifier strings - to bypass or not?, Jim Barber, 2010/10/30
• Re: [Amps] HV rectifier strings - to bypass or not?, Fuqua, Bill L, 2010/10/30
  • Re: [Amps] HV rectifier strings - to bypass or not?, Jim Barber, 2010/10/30
    • Re: [Amps] HV rectifier strings - to bypass or not?, Gary Schafer, 2010/10/30
    • Re: [Amps] HV rectifier strings - to bypass or not?, Roger (K8RI), 2010/10/30
• Re: [Amps] HV rectifier strings - to bypass or not?, Fuqua, Bill L, 2010/10/30
• Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
• Re: [Amps] HV rectifier strings - to bypass or not?, Bill, W6WRT, 2010/10/31
• [Amps] HV rectifier strings - to bypass or not?, Jim Thomson, 2010/10/30
  • Re: [Amps] HV rectifier strings - to bypass or not?, Gary Schafer, 2010/10/30
    • Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
    • Re: [Amps] HV rectifier strings - to bypass or not?, Gary Schafer, 2010/10/30
    • Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
    • Re: [Amps] HV rectifier strings - to bypass or not?, Gary Schafer, 2010/10/30
    • Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
    • Re: [Amps] HV rectifier strings - to bypass or not?, Jim Thomson, 2010/10/31
  • Re: [Amps] HV rectifier strings - to bypass or not?, Jim Barber, 2010/10/30
• [Amps] HV rectifier strings - to bypass or not?, Jim Thomson, 2010/10/30
• Re: [Amps] HV rectifier strings - to bypass or not?, Steve Thompson, 2010/10/31
  • Re: [Amps] HV rectifier strings - to bypass or not?, David Cutter, 2010/10/31
  • Re: [Amps] HV rectifier strings - to bypass or not?, Bill, W6WRT, 2010/10/31
  • Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
• [Amps] HV rectifier strings - to bypass or not?, Jim Thomson, 2010/10/31
  • Re: [Amps] HV rectifier strings - to bypass or not?, Carl, 2010/10/31
• Re: [Amps] HV rectifier strings - to bypass or not?, K1SG, 2010/10/31
• Re: [Amps] HV rectifier strings - to bypass or not?, Paul Decker, 2010/10/31
• Re: [Amps] HV rectifier strings - to bypass or not?, Mike Saculla, 2010/10/31

Re: [Amps] use or not coaxial audio cable to transmitter's, Jim Thomson, 2010/10/29

• Re: [Amps] use or not coaxial audio cable to transmitter's, W5CUL, 2010/10/30
  • Re: [Amps] use or not coaxial audio cable to transmitter's, Jim Thomson, 2010/10/30
    • Re: [Amps] use or not coaxial audio cable to transmitter's, W5CUL, 2010/10/30
    • Re: [Amps] use or not coaxial audio cable to transmitter's, W5CUL, 2010/10/30
    • Re: [Amps] use or not coaxial audio cable to transmitter's, Gary Schafer, 2010/10/30
    • Re: [Amps] use or not coaxial audio cable to transmitter's, tzikas tzik, 2010/10/31
    • Re: [Amps] use or not coaxial audio cable to transmitter's, tzikas tzik, 2010/10/31
    • Message not available
    • Re: [Amps] use or not coaxial audio cable to transmitter's, Alek Petkovic, 2010/10/31
• [Amps] use or not coaxial audio cable to transmitter's, Jim Thomson, 2010/10/30
  • Re: [Amps] use or not coaxial audio cable to transmitter's, Jim W7RY, 2010/10/31

[Amps] use or not coaxial audio cable to transmitter's modulation?, tzikas tzik, 2010/10/29

• Re: [Amps] use or not coaxial audio cable to transmitter's modulation?, Jim Brown, 2010/10/29
  • Message not available
    • Re: [Amps] use or not coaxial audio cable to transmitter's modulation?, Jim Brown, 2010/10/29

[Amps] Transformers, Steve, 2010/10/29

• Re: [Amps] Transformers, DAVE WHITE, 2010/10/29
• [Amps] Transformers, jonathan white, 2010/10/31

Re: [Amps] 8877 Pulls, Hsu, 2010/10/25

• [Amps] 8877 PULLS, kb5gt@cableone.net, 2010/10/26

[Amps] construct ferrite "line isolator", tzikas tzik, 2010/10/25

• Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/25
• Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/25
  • [Amps] 8877 Pulls, Pat Poirier, 2010/10/25
    • Re: [Amps] 8877 Pulls, Doug Renwick, 2010/10/25
    • Re: [Amps] 8877 Pulls, Hsu, 2010/10/25
  • Re: [Amps] construct ferrite "line isolator", DAVE WHITE, 2010/10/25
    • Re: [Amps] construct ferrite "line isolator", Jeff Blaine, 2010/10/25
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/25
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", tzikas tzik, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Jeff Blaine, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Ian White GM3SEK, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Jeff Blaine, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Jeff Blaine, 2010/10/26
    • [Amps] Bird 4381 Power Analyst, donroden, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/26
    • Message not available
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/26
• [Amps] construct ferrite "line isolator", Jim Thomson, 2010/10/26
  • Re: [Amps] construct ferrite "line isolator", Vic K2VCO, 2010/10/26
  • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/26
  • Message not available
    • Message not available
    • Re: [Amps] construct ferrite "line isolator", Carl, 2010/10/26
• [Amps] construct ferrite "line isolator", Jim Thomson, 2010/10/26
• [Amps] construct ferrite "line isolator", Jim Thomson, 2010/10/26
  • Re: [Amps] construct ferrite "line isolator", Ian White GM3SEK, 2010/10/26
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Ian White GM3SEK, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
  • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
• Re: [Amps] construct ferrite "line isolator", Rob Atkinson, 2010/10/27
  • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
• Re: [Amps] construct ferrite "line isolator", Ward Silver, 2010/10/27
  • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/27
    • Re: [Amps] construct ferrite "line isolator", Bill, W6WRT, 2010/10/28
    • Re: [Amps] construct ferrite "line isolator", Jim Brown, 2010/10/28
• [Amps] construct ferrite "line isolator", Jim Thomson, 2010/10/27
• Re: [Amps] construct ferrite "line isolator", Roger Parsons, 2010/10/27
  • Re: [Amps] construct ferrite "line isolator", Sam Carpenter, 2010/10/27
• Re: [Amps] construct ferrite "line isolator", Rob Atkinson, 2010/10/27
  • [Amps] Pin 1, donroden, 2010/10/27
    • Re: [Amps] Pin 1, Jim Brown, 2010/10/27

[Amps] problem with pll lock with modulation, tzikas tzik, 2010/10/25

• [Amps] problem with pll lock with modulation, tzikas tzik, 2010/10/25

[Amps] AL-811H Question, Charles Mills, 2010/10/22

• Re: [Amps] AL-811H Question, Carl, 2010/10/22
  • Re: [Amps] AL-811H Question, Charles Mills, 2010/10/25
• Re: [Amps] AL-811H Question, Hal W5GHZ, 2010/10/22
• Re: [Amps] AL-811H Question, Glen Zook, 2010/10/22
  • Re: [Amps] AL-811H Question, Charles Mills, 2010/10/23
• Re: [Amps] AL-572 Question, pfizenmayer, 2010/10/23
  • Re: [Amps] AL-572 Question, pfizenmayer, 2010/10/23
• Re: [Amps] AL-811H Question, Gudguyham, 2010/10/22
  • Re: [Amps] AL-811H Question, donroden, 2010/10/22

[Amps] IRF parts, MIKE DURKIN, 2010/10/21

• Message not available
  • Message not available
    • [Amps] FW: IRF parts, MIKE DURKIN, 2010/10/21
    • Re: [Amps] FW: IRF parts, Jim Dawson, 2010/10/21
    • Re: [Amps] FW: IRF parts, Fuqua, Bill L, 2010/10/21
    • Re: [Amps] FW: IRF parts, Ron Youvan, 2010/10/23

[Amps] Need rectifiers for X-ray supply, Borislav Trifonov, 2010/10/21

• Re: [Amps] Need rectifiers for X-ray supply, George Watson, 2010/10/21

[Amps] Tubes , sockets, etc, for sale, Jim Thomson, 2010/10/21

• [Amps] Tubes , sockets, etc, for sale, Jim Thomson, 2010/10/21

[Amps] New Design Question, TexasRF, 2010/10/20

• Re: [Amps] New Design Question, Bill, W6WRT, 2010/10/20
• Re: [Amps] New Design Question, TexasRF, 2010/10/20

[Amps] diode junction temps and thermal resistance, Kevin Normoyle, 2010/10/19

• Re: [Amps] diode junction temps and thermal resistance, Bill, W6WRT, 2010/10/19
  • Re: [Amps] diode junction temps and thermal resistance, Ian White GM3SEK, 2010/10/20
    • Re: [Amps] diode junction temps and thermal resistance, Bill, W6WRT, 2010/10/20
• Re: [Amps] diode junction temps and thermal resistance, Hal W5GHZ, 2010/10/19
• Re: [Amps] diode junction temps and thermal resistance, Carl, 2010/10/20
• Re: [Amps] diode junction temps and thermal resistance, TexasRF, 2010/10/20
• [Amps] diode junction temps and thermal resistance, Jim Thomson, 2010/10/20
  • Re: [Amps] diode junction temps and thermal resistance, Bill, W6WRT, 2010/10/20
• Re: [Amps] diode junction temps and thermal resistance, TexasRF, 2010/10/20

[Amps] GS35b es 4CX1000A INPUT, Allan Greening, 2010/10/19

• Re: [Amps] GS35b es 4CX1000A INPUT, Bill, W6WRT, 2010/10/19
  • Re: [Amps] 4- 572's, pfizenmayer, 2010/10/19
    • Re: [Amps] 4- 572's, Hsu, 2010/10/19
• Re: [Amps] GS35b es 4CX1000A INPUT, TexasRF, 2010/10/20

[Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), knormoyle@surfnetusa.com, 2010/10/19

• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Carl, 2010/10/19
• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Bill, W6WRT, 2010/10/19
  • Re: [Amps] AL-1200 debug at a distance: we might have awinner(W5GHZ), Carl, 2010/10/19
  • Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Hal W5GHZ, 2010/10/19

[Amps] EID, Rob Atkinson, 2010/10/19

• Re: [Amps] EID, Carl, 2010/10/19
• Re: [Amps] EID, TexasRF, 2010/10/19
  • Re: [Amps] EID, Richard Solomon, 2010/10/19
  • Re: [Amps] EID, Joe Dube, 2010/10/19
  • Re: [Amps] EID, Rob Atkinson, 2010/10/19
    • Re: [Amps] EID, Carl, 2010/10/19
    • Re: [Amps] EID, Rob Atkinson, 2010/10/20
    • Re: [Amps] EID/ IED, Bill NY9H, 2010/10/21

Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), TexasRF, 2010/10/19

• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Carl, 2010/10/19
  • Re: [Amps] AL-1200, Boye Christensen, 2010/10/19
• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Hal W5GHZ, 2010/10/19
• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), TexasRF, 2010/10/19
• Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), TexasRF, 2010/10/19

[Amps] AL-1200 debug at a distance: we might have a winner (W5GHZ), Kevin Normoyle, 2010/10/18

• Re: [Amps] AL-1200 debug at a distance: we might have a winner (W5GHZ), Hal W5GHZ, 2010/10/19
  • Re: [Amps] AL-1200 debug at a distance: we might have a winner(W5GHZ), Carl, 2010/10/19
• Re: [Amps] AL-1200 debug at a distance: we might have a winner (W5GHZ), Carl, 2010/10/19
  • Re: [Amps] AL-1200 debug at a distance: we might have a winner (W5GHZ), donroden, 2010/10/19

[Amps] SB220 tune capacitor, Martin Sole, 2010/10/18

• Re: [Amps] SB220 tune capacitor, Joe Subich, W4TV, 2010/10/18
  • Re: [Amps] SB220 tune capacitor, Martin Sole, 2010/10/18
    • Re: [Amps] SB220 tune capacitor, Joe Subich, W4TV, 2010/10/18
    • Re: [Amps] SB220 tune capacitor, Martin Sole, 2010/10/18
• Re: [Amps] SB220 tune capacitor, Carl, 2010/10/19
• [Amps] SB220 tune capacitor, Martin Sole, 2010/10/20

[Amps] OT clean the shack I, Hsu, 2010/10/18

• Re: [Amps] OT clean the shack I, Hsu, 2010/10/18

[Amps] AL1200, high input swr, all bands, Kevin Normoyle, 2010/10/18

• Re: [Amps] AL1200, high input swr, all bands, Alek Petkovic, 2010/10/18
  • Re: [Amps] AL1200, high input swr, all bands, Hsu, 2010/10/18
• Re: [Amps] AL1200, high input swr, all bands, Hal W5GHZ, 2010/10/18
• Re: [Amps] AL1200, high input swr, all bands, knormoyle@surfnetusa.com, 2010/10/18
• Re: [Amps] AL1200, high input swr, all bands, TexasRF, 2010/10/18
• Re: [Amps] AL1200, high input swr, all bands, knormoyle@surfnetusa.com, 2010/10/18
  • Re: [Amps] AL1200, high input swr, all bands, Roger (K8RI), 2010/10/18

[Amps] Cleaned-up and expanded YC156 constant current curves, Jim Barber, 2010/10/15

• Re: [Amps] Cleaned-up and expanded YC156 constant current curves, mikea, 2010/10/16
  • Re: [Amps] Cleaned-up and expanded YC156 constant current curves, Bill, W6WRT, 2010/10/16
  • Re: [Amps] Cleaned-up and expanded YC156 constant current curves, Jim Barber, 2010/10/16

[Amps] info on henry 2000d, K8LEEWMM, 2010/10/15

• Re: [Amps] info on henry 2000d, david sutton, 2010/10/15

[Amps] Henry 2k Classic X 1214A?, Sam Carpenter, 2010/10/15

• Re: [Amps] Henry 2k Classic X 1214A?, Martin Sole, 2010/10/15

[Amps] Pi Net Switch, Lee Buller, 2010/10/15

• Re: [Amps] Pi Net Switch, Bill, W6WRT, 2010/10/15
• Re: [Amps] Pi Net Switch, Phil Clements, 2010/10/15

[Amps] New 2 PA design, Michael Bales, 2010/10/15

• Re: [Amps] New 2 PA design, Ron Youvan, 2010/10/15
• [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/15
• [Amps] New 2 PA design, Paul Decker, 2010/10/15
  • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/15
    • Re: [Amps] New 2 PA design, Hsu, 2010/10/15
    • Re: [Amps] New 2 PA design, W2XJ, 2010/10/18
• Re: [Amps] New 2 PA design, Hsu, 2010/10/15
• Re: [Amps] New 2 PA design, Hsu, 2010/10/15
  • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/15
    • Re: [Amps] New 2 PA design, Hsu, 2010/10/15
    • Re: [Amps] New 2 PA design, Peter, 2010/10/16
    • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/16
• Re: [Amps] New 2 PA design, Dan Levin, 2010/10/15
  • Re: [Amps] New 2 PA design, Roger (K8RI), 2010/10/15
• Re: [Amps] New 2 PA design, Paul Decker, 2010/10/15
• Re: [Amps] New 2 PA design, Paul Decker, 2010/10/16
  • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/16
    • Re: [Amps] New 2 PA design, Roger (K8RI), 2010/10/16
    • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/16
    • Re: [Amps] New 2 PA design, Roger (K8RI), 2010/10/17
    • Re: [Amps] New 2 PA design, David Cutter, 2010/10/16
• [Amps] New 2 PA design, Jim Thomson, 2010/10/17
  • Re: [Amps] New 2 PA design, David Cutter, 2010/10/17
• Re: [Amps] New 2 PA design, Paul Decker, 2010/10/17
  • Re: [Amps] New 2 PA design, Baruch Zilbershatz, 2010/10/17

Re: [Amps] cathode driven 4CX250B and super cathode driven, Hsu, 2010/10/13

• Re: [Amps] cathode driven 4CX250B and super cathode driven, Bill Fuqua, 2010/10/13

[Amps] cathode driven 4CX tubes., Fuqua, Bill L, 2010/10/12

• [Amps] cathode driven 4CX250B and super cathode driven, Hsu, 2010/10/13
• Re: [Amps] cathode driven 4CX tubes., donroden, 2010/10/13
• [Amps] cathode driven 4CX tubes., Jim Thomson, 2010/10/13

[Amps] QRP amp, new, Craig Brammer, 2010/10/12

• Re: [Amps] QRP amp, new, Hsu, 2010/10/12

[Amps] 6146 via 572b's, johne tds.net, 2010/10/12

• Re: [Amps] 6146 via 572b's, Mike McCarthy, W1NR, 2010/10/12
  • [Amps] 4cx1500 0r 4cx1000 is in the Bill Or book 6146 via 572b's, Kevin Adam, 2010/10/12
• Re: [Amps] 6146 via 572b's, Robert Morris, 2010/10/12
  • Re: [Amps] 6146 via 572b's, Alex Malyava, 2010/10/12
  • Re: [Amps] 6146 via 572b's, Bill, W6WRT, 2010/10/12
    • Re: [Amps] 6146 via 572b's, Carl, 2010/10/12
• Message not available
  • Re: [Amps] 6146 via 572b's, Alek Petkovic, 2010/10/12
    • Re: [Amps] 6146 via 572b's, Bill, W6WRT, 2010/10/12
• Re: [Amps] 6146 via 572b's, Lee Buller, 2010/10/12
• Re: [Amps] 6146 via 572b's, Carl, 2010/10/12
• Re: [Amps] 6146 via 572b's, Bill Fuqua, 2010/10/12
  • Re: [Amps] 6146 via 572b's, Gary Schafer, 2010/10/12
    • Re: [Amps] 6146 via 572b's, DF3KV, 2010/10/12
    • Re: [Amps] 6146 via 572b's, Fuqua, Bill L, 2010/10/12
  • Re: [Amps] 6146 via 572b's, Carl, 2010/10/12
• Re: [Amps] 6146 via 572b's, john . brewer, 2010/10/12
• [Amps] 6146 via 572b's, Jim Thomson, 2010/10/13
  • Re: [Amps] 6146 via 572b's, Rick Stealey, 2010/10/13
    • Re: [Amps] 6146 via 572b's, Gary Patterson, 2010/10/13
    • Re: [Amps] 6146 via 572b's, k7fm, 2010/10/13
    • Re: [Amps] 6146 via 572b's, Bill Fuqua, 2010/10/13
    • Re: [Amps] 6146 via 572b's, Gary Patterson, 2010/10/13

[Amps] Electrical Specs for RB1H-26N352, JTB ô¿ô, 2010/10/12

• Re: [Amps] Electrical Specs for RB1H-26N352, Dan, 2010/10/12

[Amps] AL-1200 Problem Solved, Richard Solomon, 2010/10/11

• Re: [Amps] AL-1200 Problem Solved, mikea, 2010/10/11

[Amps] (no subject), Dan Hall, 2010/10/11

• [Amps] (no subject), idaho gn, 2010/10/27

[Amps] PS ideas for solid state amps, Tom & Martha, 2010/10/11

• Re: [Amps] PS ideas for solid state amps, Bill, W6WRT, 2010/10/11
  • Re: [Amps] PS ideas for solid state amps, Carl, 2010/10/11
• Re: [Amps] PS ideas for solid state amps, TexasRF, 2010/10/11

[Amps] AL-1200 Problem, Richard Solomon, 2010/10/10

• [Amps] Yaesu's VL2000, Mike & Becca Krzystyniak, 2010/10/10
• Re: [Amps] AL-1200 Problem, Jim W7RY, 2010/10/11

[Amps] Circuit for GS35B, Andre Goldschagg, 2010/10/10

• Message not available
  • Re: [Amps] Circuit for GS35B, Alek Petkovic, 2010/10/11

[Amps] TUNER, Bob Gibson, 2010/10/10

• Re: [Amps] TUNER, MIKE DURKIN, 2010/10/10
  • Re: [Amps] TUNER, Carl, 2010/10/10
• Re: [Amps] TUNER, Roger (K8RI), 2010/10/10
• Re: [Amps] TUNER, N1BUG, 2010/10/10
• [Amps] TUNER, Jim Thomson, 2010/10/11
  • Re: [Amps] TUNER, Jason Hissong, 2010/10/11
• [Amps] TUNER, Bob Gibson, 2010/10/11
  • Re: [Amps] TUNER, Gary Schafer, 2010/10/11
  • Re: [Amps] TUNER, N1BUG, 2010/10/12
    • Re: [Amps] TUNER, Roger (K8RI), 2010/10/12
• [Amps] TUNER, Jim Thomson, 2010/10/12
  • Re: [Amps] TUNER, Roger (K8RI), 2010/10/13
  • Re: [Amps] TUNER, Jim W7RY, 2010/10/13
• [Amps] TUNER, Jim Thomson, 2010/10/14
  • Re: [Amps] TUNER, Ian White GM3SEK, 2010/10/14

Re: [Amps] Which LDG Autotuner for Amp Input?, TexasRF, 2010/10/09

• Re: [Amps] Which LDG Autotuner for Amp Input?, Gudguyham, 2010/10/09
  • Re: [Amps] Which LDG Autotuner for Amp Input?, Mike, 2010/10/09
• [Amps] Which LDG Autotuner for Amp Input?, Jim Thomson, 2010/10/09
  • Re: [Amps] Which LDG Autotuner for Amp Input?, Jim Tonne, 2010/10/09
• Re: [Amps] Which LDG Autotuner for Amp Input?, Randy S., 2010/10/10
  • Re: [Amps] Which LDG Autotuner for Amp Input?, Carl, 2010/10/10
  • Re: [Amps] Which LDG Autotuner for Amp Input?, Jim W7RY, 2010/10/11

[Amps] GRIPE!, jonathan white, 2010/10/08

• Re: [Amps] GRIPE!, Jim W7RY, 2010/10/08
• [Amps] GRIPE!, Jim Thomson, 2010/10/08

[Amps] O.T. Emails Gone., Alek Petkovic, 2010/10/07

• Re: [Amps] O.T. Emails Gone., Roger (K8RI), 2010/10/07
  • Re: [Amps] O.T. Emails Gone., Alek Petkovic, 2010/10/07
  • Re: [Amps] O.T. Emails Gone., David Cutter, 2010/10/07
    • Re: [Amps] O.T. Emails Gone., Dave M, 2010/10/08
• Re: [Amps] O.T. Emails Gone., mikea, 2010/10/08
• Re: [Amps] O.T. Emails Gone., Carl, 2010/10/08

[Amps] The old PEP question., Charles Hedrick, 2010/10/07

• Message not available
  • Re: [Amps] The old PEP question., Alek Petkovic, 2010/10/07
    • Re: [Amps] The old PEP question., Radio WC6W, 2010/10/08
    • Re: [Amps] The old PEP question., Carl, 2010/10/08
• Re: [Amps] The old PEP question., Carl, 2010/10/07
  • Re: [Amps] The old PEP question., Alek Petkovic, 2010/10/07
  • Re: [Amps] The old PEP question., Alek Petkovic, 2010/10/07
  • Re: [Amps] The old PEP question., Bill, W6WRT, 2010/10/08
    • Re: [Amps] The old PEP question., Mike, 2010/10/08
    • Re: [Amps] The old PEP question., Carl, 2010/10/09
    • Re: [Amps] The old PEP question., Bill, W6WRT, 2010/10/09

[Amps] OT Ebay Bidding - Auto Bid, Lee Buller, 2010/10/07

• Re: [Amps] OT Ebay Bidding - Auto Bid, Patrick, 2010/10/08
• Re: [Amps] OT Ebay Bidding - Auto Bid, Gudguyham, 2010/10/08
• Re: [Amps] OT Ebay Bidding - Auto Bid, TexasRF, 2010/10/08
  • Re: [Amps] OT Ebay Bidding - Auto Bid, Roger (K8RI), 2010/10/08
  • Re: [Amps] OT Ebay Bidding - Auto Bid, Pete Lancashire, 2010/10/08

[Amps] Autotuner for Amp Input, Lee Buller, 2010/10/07

• Re: [Amps] Autotuner for Amp Input, Bill, W6WRT, 2010/10/07
  • Re: [Amps] Autotuner for Amp Input, Jim Barber, 2010/10/07
    • Re: [Amps] Autotuner for Amp Input, Gary Schafer, 2010/10/07
    • Re: [Amps] Autotuner for Amp Input, Jim Barber, 2010/10/07
    • Re: [Amps] Autotuner for Amp Input, Jim W7RY, 2010/10/07
    • Re: [Amps] Autotuner for Amp Input, Roger D Johnson, 2010/10/08
• [Amps] Which LDG Autotuner for Amp Input?, N1BUG, 2010/10/09
  • Re: [Amps] Which LDG Autotuner for Amp Input?, Carl, 2010/10/09
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Alek Petkovic, 2010/10/09
    • Re: [Amps] Which LDG Autotuner for Amp Input?, N1BUG, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Bill, W6WRT, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Gary Schafer, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Bill, W6WRT, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, donroden, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, jeff millar, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Carl, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Gary Schafer, 2010/10/10
    • Re: [Amps] Which LDG Autotuner for Amp Input?, Jim W7RY, 2010/10/11
• [Amps] Autotuner for Amp Input, Jim Thomson, 2010/10/08
  • Re: [Amps] Autotuner for Amp Input, Jim Barber, 2010/10/08
• Re: [Amps] Autotuner for Amp Input, TexasRF, 2010/10/09

[Amps] Switching Supplies for High Current Filaments, Jim Thomson, 2010/10/07

• [Amps] Heath SB1000 blowing fuses, fault finding suggestions., Mike & Becca Krzystyniak, 2010/10/07
  • Re: [Amps] Heath SB1000 blowing fuses, fault finding suggestions., Carl, 2010/10/07
  • Re: [Amps] Heath SB1000 blowing fuses, fault finding suggestions., Dave M, 2010/10/07
  • Re: [Amps] Heath SB1000 blowing fuses, fault finding suggestions., Jim W7RY, 2010/10/07

[Amps] GRIPE: Why must stuff like this come up on e-bay?, Patrick, 2010/10/07

• Message not available
  • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Alek Petkovic, 2010/10/07
    • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Fern, 2010/10/07
    • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Jim W7RY, 2010/10/07
• Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Carl, 2010/10/07
  • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Jack/W6NF, 2010/10/07
• Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Gary Smith, 2010/10/07
  • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Roger (K8RI), 2010/10/07
    • Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Carl, 2010/10/07
• Re: [Amps] GRIPE: Why must stuff like this come up on e-bay?, Roger (K8RI), 2010/10/09

[Amps] Regarding skin depth and silver plaing of tank coils, LB3HC, 2010/10/06

• Re: [Amps] Regarding skin depth and silver plaing of tank coils, Dr. David Kirkby, 2010/10/07

[Amps] Shielding Effectiveness, Ward Silver, 2010/10/06

• Re: [Amps] Shielding Effectiveness, Roger (K8RI), 2010/10/06
  • Re: [Amps] Shielding Effectiveness, Sam Carpenter, 2010/10/06
    • Re: [Amps] Shielding Effectiveness, Ron Youvan, 2010/10/06
    • Re: [Amps] Shielding Effectiveness, Roger (K8RI), 2010/10/06
    • Re: [Amps] Shielding Effectiveness, Dave M, 2010/10/06
    • Re: [Amps] Shielding Effectiveness, Radio WC6W, 2010/10/07

[Amps] Holes vs. screen for chassis ventilation?, Dan Levin, 2010/10/05

• Re: [Amps] Holes vs. screen for chassis ventilation?, Jim W7RY, 2010/10/05
• Re: [Amps] Holes vs. screen for chassis ventilation?, Ron Youvan, 2010/10/06
• Re: [Amps] Holes vs. screen for chassis ventilation?, Carl, 2010/10/06
• Re: [Amps] Holes vs. screen for chassis ventilation?, TexasRF, 2010/10/06
  • Re: [Amps] Holes vs. screen for chassis ventilation?, Sam Carpenter, 2010/10/06
  • Re: [Amps] Holes vs. screen for chassis ventilation?, Jim Brown, 2010/10/06
    • Re: [Amps] Holes vs. screen for chassis ventilation?, Jim Barber, 2010/10/06
• [Amps] Holes vs. screen for chassis ventilation?, John Lyles, 2010/10/06
  • Re: [Amps] Holes vs. screen for chassis ventilation?, mikea, 2010/10/06
• Re: [Amps] Holes vs. screen for chassis ventilation?, Rob Atkinson, 2010/10/06

[Amps] Switching Supplies for High Current Filaments, Patrick Barthelow, 2010/10/05

• Re: [Amps] Switching Supplies for High Current Filaments, Bill, W6WRT, 2010/10/05
• Re: [Amps] Switching Supplies for High Current Filaments, Paul Decker, 2010/10/05
  • Re: [Amps] Switching Supplies for High Current Filaments, Jim Barber, 2010/10/05
  • Re: [Amps] Switching Supplies for High Current Filaments, Radio WC6W, 2010/10/07
    • Re: [Amps] Switching Supplies for High Current Filaments, David Cutter, 2010/10/07
• [Amps] Switching Supplies for High Current Filaments, Jim Thomson, 2010/10/05
  • Re: [Amps] Switching Supplies for High Current Filaments, Fuqua, Bill L, 2010/10/05
• Re: [Amps] Switching Supplies for High Current Filaments, Baruch Zilbershatz, 2010/10/05
  • Re: [Amps] Switching Supplies for High Current Filaments, Randall, Randy, 2010/10/06
    • Re: [Amps] Switching Supplies for High Current Filaments, Ron Youvan, 2010/10/06
• Re: [Amps] Switching Supplies for High Current Filaments, TexasRF, 2010/10/06
  • Re: [Amps] Switching Supplies for High Current Filaments, Jim W7RY, 2010/10/06
    • Re: [Amps] Switching Supplies for High Current Filaments, Hsu, 2010/10/06
    • Re: [Amps] Switching Supplies for High Current Filaments, Jim Thomson, 2010/10/06
    • Re: [Amps] Switching Supplies for High Current Filaments, Jim W7RY, 2010/10/06
    • Re: [Amps] Switching Supplies for High Current Filaments, alexeban, 2010/10/07
    • Re: [Amps] Switching Supplies for High Current Filaments, Roger (K8RI), 2010/10/07
  • Re: [Amps] Switching Supplies for High Current Filaments, Roger (K8RI), 2010/10/06
  • Re: [Amps] Switching Supplies for High Current Filaments, W2XJ, 2010/10/09
    • Re: [Amps] Switching Supplies for High Current Filaments, Jim Thomson, 2010/10/07
    • Re: [Amps] Switching Supplies for High Current Filaments, W2XJ, 2010/10/09
• Re: [Amps] Switching Supplies for High Current Filaments, TexasRF, 2010/10/07
• [Amps] Switching Supplies for High Current Filaments, Paul Decker, 2010/10/07
  • Re: [Amps] Switching Supplies for High Current Filaments, Radio WC6W, 2010/10/07
• [Amps] Switching Supplies for High Current Filaments, John Lyles, 2010/10/07

[Amps] 833 plate cathode capacitance, Fuqua, Bill L, 2010/10/04

• [Amps] 833 plate cathode capacitance, Jim Thomson, 2010/10/06
  • Re: [Amps] 833 plate cathode capacitance, Bill Fuqua, 2010/10/06

[Amps] Questions from a beginner, Eric Mynes, 2010/10/04

• Re: [Amps] Questions from a beginner, Jeff Carter, 2010/10/04
• Re: [Amps] Questions from a beginner, k7fm, 2010/10/04
  • Re: [Amps] Questions from a beginner, Robert Morris, 2010/10/04
  • Re: [Amps] Questions from a beginner, Bill, W6WRT, 2010/10/04
  • Re: [Amps] Questions from a beginner, Roger (K8RI), 2010/10/04
  • Re: [Amps] Questions from a beginner, Carl, 2010/10/05
    • [Amps] Schematic sought for Apollo 300X, Randall, Randy, 2010/10/05
    • Re: [Amps] Questions from a beginner, Paul Kraemer, 2010/10/05
  • Re: [Amps] Questions from a beginner, Dave M, 2010/10/05

[Amps] Henry 2000D (3CX3000A7) on E-Bay, WB6WCW, 2010/10/04

• Re: [Amps] Henry 2000D (3CX3000A7) on E-Bay, Carl, 2010/10/04

Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, TexasRF, 2010/10/04

• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Steve Thompson, 2010/10/05
• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Bill, W6WRT, 2010/10/05

Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Steve Thompson, 2010/10/04

• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Jeff Blaine, 2010/10/05
• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Dr. David Kirkby, 2010/10/05
• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with, Bill Fuqua, 2010/10/06

[Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, LB3HC, 2010/10/04

• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, Mike McCarthy, W1NR, 2010/10/04
• Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, Dr. David Kirkby, 2010/10/04
  • Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, Carl, 2010/10/04
    • Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, Larry Benko, 2010/10/04
    • Re: [Amps] Skin depth: silver plating of tank circuit coil feasible with chemical plating kits?, David Cutter, 2010/10/04
    • Re: [Amps] Skin depth: silver plating of tank circuit coil feasiblewith chemical plating kits?, Carl, 2010/10/04

[Amps] April 1982 QST Hints and Kinks SB-200, Jim W7RY, 2010/10/02

• Re: [Amps] April 1982 QST Hints and Kinks SB-200, Jim W7RY, 2010/10/02

Re: [Amps] Any experiences with "powergridtube"? (YC156 hunt), Roger, 2010/10/01

• Re: [Amps] Any experiences with "powergridtube"? (YC156 hunt), Ian White GM3SEK, 2010/10/01