Re: [Amps] 6146 via 572b's

[Lee Buller <k0wa@swbell.net>]

This has been done with an old HW100 or HW101.  The guy fed the output of the 
K2 
(or QRP rig) into the HW100 just before the amp (2 x 6146) just after the 
driver.  He used the tuned output/input between the driver and the 6146s.

See:  http://frrl.files.wordpress.com/2008/09/hotwaterforthek2.pdf

Lee K0WA


 In our day and age it seems that Common Sense is in short supply.  If you 
don't 
have any Common Sense - get some Common Sense and use it.  If you can't find 
any 
Common Sense, ask for help from somebody who has some Common Sense.  Is Common 
Sense divine?

Common Sense is the image of the Creator expressing revealed truth in my mind. 
-  J. Wolf






________________________________
From: johne tds.net <johne@tds.net>
To: amps <amps@contesting.com>
Sent: Tue, October 12, 2010 1:15:22 PM
Subject: [Amps] 6146 via 572b's

I was in qso with a another ham about a tube type amp that could be
used with our  Yaesu FT-817 's. The FT-817 will do about 5 watt's on a
good day.  He recalled that he did know of a amp like this.  So
looking for a name or a schematic ?

Thanks de John K0CQW
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps