Wow, just wow. She may not be a keeper.
Good luck finding the rectifiers.
On Oct 21, 2010, at 1:20 PM, Borislav Trifonov wrote:
> Hello gentlemen,
> I was using four GE KR-9A kenotrons (probably pre-1960s) to rectify 120
> kV at (pulse driven average) 50 mA for my DIY X-ray setup. Didn't
> bother immersing in oil due to running at much lower power than what the
> tubes are obviously designed for.
> Last night had a big argument with the girlfriend and she broke three of
> the tubes... I almost cried.
> I'm wondering if anyone here has leads to other suitable high voltage,
> high power tubes so I can rebuild my bridge. I've only found one other
> KR-9A willing to part with its owner on teh intrawebs this far.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|