[TenTec] Omni VI S-Meter, Hamdriver66, 2008/06/29

• Re: [TenTec] Omni VI S-Meter, Dell Ray, 2008/06/30

[TenTec] FD & O-II, Kim Elmore, 2008/06/29

• Re: [TenTec] FD & O-II, Charles Harpole, 2008/06/29
• Re: [TenTec] FD & O-II, rfulco, 2008/06/29

[TenTec] Omni VII rig control w/logging software, Joseph Clayton, 2008/06/29

• Re: [TenTec] Omni VII rig control w/logging software, Wayne Whitman, 2008/06/29
• Re: [TenTec] Omni VII rig control w/logging software, Ernie Piche N1SW, 2008/06/29
• Re: [TenTec] Omni VII rig control w/logging software, John Sheeley, 2008/06/29

Re: [TenTec] OT: Toroid ratings / selection (was TenTec 228 ATU), Marinus Loewensteijn, 2008/06/28

• Re: [TenTec] OT: Toroid ratings / selection (was TenTec 228 ATU), Dr. Gerald N. Johnson, 2008/06/28

[TenTec] Orion II, Wayne Whitman, 2008/06/28

• Re: [TenTec] Orion II, Wayne Whitman, 2008/06/29

[TenTec] Omni VII, Joe Schatz, 2008/06/28

• Re: [TenTec] Omni VII, John T. Fleming, 2008/06/28

Re: [TenTec] TenTec 228 ATU - update, Marinus Loewensteijn, 2008/06/28

• Re: [TenTec] TenTec 228 ATU - update, Dr. Gerald N. Johnson, 2008/06/28

[TenTec] [Fwd: 555 help] - forwarded on behalf of KE6GFF/T6EE, Jim Lowman, 2008/06/27

• Re: [TenTec] [Fwd: 555 help] - forwarded on behalf of KE6GFF/T6EE, Stuart Rohre, 2008/06/30
  • Re: [TenTec] [Fwd: 555 help] - forwarded on behalf of KE6GFF/T6EE, Dr. Gerald N. Johnson, 2008/06/30
    • Re: [TenTec] [Fwd: 555 help] - forwarded on behalf of KE6GFF/T6EE, Stuart Rohre, 2008/06/30

[TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, Derwin Goliver, 2008/06/26

• Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, Ernie Piche N1SW, 2008/06/26
• Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, James C. Owen, III, 2008/06/27
  • Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, Geoffrey S. Mendelson, 2008/06/27
• Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, Steve Berg, 2008/06/26
  • Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, DW Holtman, 2008/06/26
    • Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, Dr. Gerald N. Johnson, 2008/06/26
    • Re: [TenTec] Mics for Pegasus NEWBE HERE HELLO ALL, KEN RINDFLEISCH, 2008/06/27

[TenTec] Omnin VII receiver problems - revisited, Bill Mellema, 2008/06/25

• Re: [TenTec] Omnin VII receiver problems - revisited, Denton, 2008/06/25

[TenTec] F.S. Orion 2 Special Sale, info4mjs, 2008/06/25

• Message not available
  • Re: [TenTec] F.S. Orion 2 Special Sale, jbjr, 2008/06/25
• Re: [TenTec] F.S. Orion 2 Special Sale, Barry N1EU, 2008/06/25

[TenTec] Helping a blind ham, Kevin Anderson, 2008/06/25

• Re: [TenTec] Helping a blind ham, Stuart Rohre, 2008/06/26

[TenTec] Ten Tec 2510 Manual, w7sk, 2008/06/25

• [TenTec] Ten Tec 2510 Manual, Ralph Covington, 2008/06/25

[TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25

• [TenTec] better parts, Charles Harpole, 2008/06/25
• Re: [TenTec] Orion II A9 Board Failure...Again!, Alan Sewell N5NA, 2008/06/25
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, pfizenmayer, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, pfizenmayer, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/25
• Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/25
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Geoffrey S. Mendelson, 2008/06/25
• Re: [TenTec] Orion II A9 Board Failure...Again!, John K Gotwals, 2008/06/25
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25
• [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/25
    • Re: [TenTec] Orion II A9 Board Failure...Again!, pfizenmayer, 2008/06/26
• Re: [TenTec] Orion II A9 Board Failure...Again!, Speer, Doug, 2008/06/26
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/26
  • Re: [TenTec] Orion II A9 Board Failure...Again!, pfizenmayer, 2008/06/26
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Dick Williams, 2008/06/26
    • Re: [TenTec] Orion II A9 Board Failure...Again!, Ron Castro, 2008/06/26
• Re: [TenTec] Orion II A9 Board Failure...Again!, Jim WA9YSD, 2008/06/26
  • [TenTec] 555 Scout HELP, John Kountz, 2008/06/26
    • Re: [TenTec] 555 Scout HELP, Phil Zminda, 2008/06/26
    • Re: [TenTec] 555 Scout HELP, Dr. Gerald N. Johnson, 2008/06/27
    • Re: [TenTec] 555 Scout HELP, KC1DI, 2008/06/27
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/26
  • Message not available
    • Re: [TenTec] Argonaut II Backlight, Steve Berg, 2008/06/27
    • Re: [TenTec] Argonaut II Backlight, Alan Sewell N5NA, 2008/06/28
• Re: [TenTec] Orion II A9 Board Failure...Again!, Kc9cdt, 2008/06/26
• Re: [TenTec] Orion II A9 Board Failure...Again!, Jim WA9YSD, 2008/06/27
  • Re: [TenTec] Orion II A9 Board Failure...Again!, Dr. Gerald N. Johnson, 2008/06/27

Re: [TenTec] 32 bit N4PY Software coming soon, Paul, 2008/06/24

• Re: [TenTec] 32 bit N4PY Software coming soon, n4py, 2008/06/24

[TenTec] TenTec 228 ATU, Marinus Loewensteijn, 2008/06/24

• Re: [TenTec] TenTec 228 ATU, Dr. Gerald N. Johnson, 2008/06/24
• Re: [TenTec] TenTec 228 ATU, Marinus Loewensteijn, 2008/06/27
  • Re: [TenTec] TenTec 228 ATU, Dr. Gerald N. Johnson, 2008/06/27
• Re: [TenTec] TenTec 228 ATU, Marinus Loewensteijn, 2008/06/28
  • Re: [TenTec] TenTec 228 ATU, Dr. Gerald N. Johnson, 2008/06/28

[TenTec] High Resolution for Orion 2, Grant Bright, 2008/06/23

• Re: [TenTec] High Resolution for Orion 2, Rick Williams, 2008/06/23
  • Re: [TenTec] High Resolution for Orion 2, Grant Bright, 2008/06/24
    • [TenTec] Orion II, John Simon, 2008/06/25
    • Re: [TenTec] Orion II, Don, 2008/06/25
    • Re: [TenTec] Orion II, Kirk.Harding, 2008/06/25
    • Re: [TenTec] Orion II, John Simon, 2008/06/25

[TenTec] SOLD: CMOS4 keyer, Andrew Moore, 2008/06/22

• [TenTec] FS: Mint Ten Tec Titan 425 - vy low use, W4CX, 2008/06/22
  • [TenTec] 32 bit N4PY Software coming soon, n4py, 2008/06/22
    • Re: [TenTec] 32 bit N4PY Software coming soon, Douglas Shock, 2008/06/22
    • Re: [TenTec] 32 bit N4PY Software coming soon, Francisco E. Viegener, 2008/06/23
    • [TenTec] TT 238A tuner efficiency, Denton, 2008/06/25
  • [TenTec] SOLD: Mint Ten Tec Titan 425 - vy low use, W4CX, 2008/06/27

[TenTec] FS: Pair of 263 remote VFOs (Corsair, Corsair II), Andrew Moore, 2008/06/22

• Re: [TenTec] FS: Pair of 263 remote VFOs (Corsair, Corsair II), George, 2008/06/22

[TenTec] FS: Inrad #764 roofing filter, Dan Newby, 2008/06/20

• [TenTec] WTB: Inrad #763 – CW roofing filter, Anthony A. Luscre, 2008/06/20
• [TenTec] FS Ten-Tec Classics (Two Argonaut 515, CW Filter Model 208A & Argosy), Anthony A. Luscre, 2008/06/20

[TenTec] Tuner 238B, TMorton, 2008/06/17

• Re: [TenTec] Tuner 238B, Ron Castro, 2008/06/17
  • [TenTec] knobs, Charles Harpole, 2008/06/17
• Re: [TenTec] Tuner 238B, Denton, 2008/06/17
• Re: [TenTec] Tuner 238B, Duane Calvin, 2008/06/17

[TenTec] Limited Edition 40th anniversary CW paddle coming from Ten-Tec, Ten-Tec Amateur Radio Sales, 2008/06/17

• Re: [TenTec] Limited Edition 40th anniversary CW paddle coming from Ten-Tec, Wayne Whitman, 2008/06/17

[TenTec] Omni VI problems, continued, Ken Brown, 2008/06/16

• Re: [TenTec] Omni VI problems, continued, Steve Hunt, 2008/06/16

[TenTec] Solder and my Omni, Dell Ray, 2008/06/15

• Re: [TenTec] Solder and my Omni, Stuart Rohre, 2008/06/16
  • Re: [TenTec] Solder and my Omni, Dell Ray, 2008/06/17
    • Re: [TenTec] Solder and my Omni, Dr. Gerald N. Johnson, 2008/06/17
    • Re: [TenTec] Solder and my Omni, Stuart Rohre, 2008/06/17
    • Re: [TenTec] Solder and my Omni, Dell Ray, 2008/06/18
  • Re: [TenTec] Solder and my Omni, DW Holtman, 2008/06/17
    • Re: [TenTec] Solder and my Omni, Dell Ray, 2008/06/17
    • Re: [TenTec] Solder and my Omni, Bruce McLaughlin, 2008/06/17

[TenTec] Encoder noise on tuning on Omni7, Dave, 2008/06/15

• Re: [TenTec] Encoder noise on tuning on Omni7, B. Lee Cornwell, 2008/06/15

[TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/14

• Re: [TenTec] OmniVI Plus Over Drive Amp, wa3fiy, 2008/06/14
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Steve Hunt, 2008/06/14
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/14
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Steve Hunt, 2008/06/14
    • Re: [TenTec] OmniVI Plus Over Drive Amp, wa3fiy, 2008/06/14
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Steve Hunt, 2008/06/14
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Duane Calvin, 2008/06/14
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/14
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/14
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/15
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Duane Calvin, 2008/06/15
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/15
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/16
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/17
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Duane Calvin, 2008/06/17
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/22
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Dr. Gerald N. Johnson, 2008/06/22
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/22
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Dr. Gerald N. Johnson, 2008/06/22
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/22
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/24
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Dr. Gerald N. Johnson, 2008/06/24
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/25
    • Re: [TenTec] OmniVI Plus Over Drive Amp, Dr. Gerald N. Johnson, 2008/06/25
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/25
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Dr. Gerald N. Johnson, 2008/06/26
  • Re: [TenTec] OmniVI Plus Over Drive Amp, Ken Brown, 2008/06/26
• Re: [TenTec] OmniVI Plus Over Drive Amp, Jim WA9YSD, 2008/06/26

[TenTec] "Z" match question, Marty Hartwell, 2008/06/13

• Re: [TenTec] "Z" match question, John Huffman, 2008/06/13
• Re: [TenTec] "Z" match question, Dr. Gerald N. Johnson, 2008/06/14

[TenTec] Fw: The Left-handed K3, Ed Malmgren, 2008/06/13

• Re: [TenTec] Fw: The Left-handed K3, Ron Notarius W3WN, 2008/06/13

Re: [TenTec] The Left-handed K3, d . e . warnick, 2008/06/13

• Re: [TenTec] The Left-handed K3, Bill Tippett, 2008/06/13
  • Re: [TenTec] The Left-handed K3, John Graves, 2008/06/13
  • Re: [TenTec] The Left-handed K3, Ron Zond, 2008/06/13
    • Re: [TenTec] The Left-handed VI+, Bob Close, 2008/06/13
    • Re: [TenTec] The Left-handed VI+, DAVID HELLER, 2008/06/13
    • Re: [TenTec] The Left-handed VI+, Wayne Whitman, 2008/06/13
    • [TenTec] One more for CW..., jerome schatten, 2008/06/14

[TenTec] Any ETA on the new Jupiter firmware?, ab9go, 2008/06/13

• Re: [TenTec] Any ETA on the new Jupiter firmware?, Henry Mackey, 2008/06/13
• Re: [TenTec] Any ETA on the new Jupiter firmware?, W4ABW, 2008/06/13

[TenTec] TT Centurion, Doyle, 2008/06/12

• Re: [TenTec] TT Centurion, Richard Detweiler, 2008/06/12
• Re: [TenTec] TT Centurion, Gary Hoffman, 2008/06/12
  • Re: [TenTec] TT Centurion, Dr. Gerald N. Johnson, 2008/06/12
    • Re: [TenTec] TT Centurion, Kim Elmore, 2008/06/12
• Re: [TenTec] TT Centurion, Duane Calvin, 2008/06/12
  • Re: [TenTec] TT Centurion, Gary Hoffman, 2008/06/12
    • Re: [TenTec] TT Centurion, Duane Calvin, 2008/06/12
    • Re: [TenTec] TT Centurion, Ken Brown, 2008/06/13
• Re: [TenTec] TT Centurion, Kimberly Elmore, 2008/06/12
• [TenTec] TT Centurion, Doyle, 2008/06/13
  • Re: [TenTec] TT Centurion, Carter, 2008/06/13

[TenTec] ORION II v. K3 flexibility (not that kind), Dave, 2008/06/12

• [TenTec] The Left-handed K3, Charles Harpole, 2008/06/12
  • Re: [TenTec] The Left-handed K3, Wayne Whitman, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Patrick Signs, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Dick Williams, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Wayne Whitman, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Mike Hyder -N4NT-, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Dudley Hurry, 2008/06/13
    • Re: [TenTec] The Left-handed K3, Stan Barr, 2008/06/13
• [TenTec] front panel sockets, Charles Harpole, 2008/06/12
  • Re: [TenTec] front panel sockets, Rick Denney, 2008/06/13
• Re: [TenTec] ORION II v. K3 flexibility (not that kind), Jim Brown K9YC, 2008/06/14

[TenTec] OT: coax versus parallel wire, Jim WA9YSD, 2008/06/11

• Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/12
• Re: [TenTec] OT: coax versus parallel wire, Stuart Rohre, 2008/06/12

[TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/11

• Re: [TenTec] OT 75 Ohm twin feeder, CSM\(r\) Gary Huber, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/11
    • Re: [TenTec] OT 75 Ohm twin feeder, CSM\(r\) Gary Huber, 2008/06/12
• Re: [TenTec] OT 75 Ohm twin feeder, Jim Brown K9YC, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/11
    • Re: [TenTec] OT 75 Ohm twin feeder, Jim Brown K9YC, 2008/06/14
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/14
    • Re: [TenTec] OT 75 Ohm twin feeder, Jim Brown K9YC, 2008/06/15
• Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Stuart Rohre, 2008/06/12
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/12
  • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/12
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/12
• Re: [TenTec] OT 75 Ohm twin feeder, Marinus Loewensteijn, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Tim Heasman, 2008/06/11
  • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/11
• Re: [TenTec] OT 75 Ohm twin feeder, Jim WA9YSD, 2008/06/12
  • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/12
  • Re: [TenTec] OT 75 Ohm twin feeder, Bob Good, 2008/06/12
  • Re: [TenTec] OT 75 Ohm twin feeder, Bwana Bob, 2008/06/14
    • Re: [TenTec] OT zip cord, Charles Harpole, 2008/06/14
    • Re: [TenTec] OT 75 Ohm twin feeder, Stuart Rohre, 2008/06/17
    • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/17
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/17
    • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/17
    • Re: [TenTec] OT 75 Ohm twin feeder, Fraser Robertson, 2008/06/17
    • Re: [TenTec] OT 75 Ohm twin feeder, Jim Brown K9YC, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Stuart Rohre, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Ronald C. McConnell, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Fraser Robertson, 2008/06/18
    • Re: [TenTec] OT 75 Ohm twin feeder, Dr. Gerald N. Johnson, 2008/06/17
    • Re: [TenTec] OT testing insulation dielectric properties, Stuart Rohre, 2008/06/17
• Re: [TenTec] OT 75 Ohm twin feeder, Jim WA9YSD, 2008/06/15
• Re: [TenTec] OT 75 Ohm twin feeder, Dave Kelley, 2008/06/18
• Re: [TenTec] OT 75 Ohm twin feeder, Jim WA9YSD, 2008/06/18
• Re: [TenTec] OT 75 Ohm twin feeder, Jim WA9YSD, 2008/06/18
  • Re: [TenTec] OT 75 Ohm twin feeder, Steve Hunt, 2008/06/18

[TenTec] Looking for Model 3402 or 3403 Broadband Vee antennas (sold in the past by Ten-Tec), Jerry Volpe, 2008/06/10

• Re: [TenTec] Looking for Model 3402 or 3403 Broadband Vee antennas (sold in the past by Ten-Tec), Stuart Rohre, 2008/06/12

[TenTec] tentec, c.s., 2008/06/10

• Re: [TenTec] tentec, Alan Sewell N5NA, 2008/06/10
  • Re: [TenTec] tentec, W8BVH, 2008/06/10
• Re: [TenTec] tentec, Ariel M. Elam, 2008/06/10

Re: [TenTec] OT: Power Pole noises, Jim WA9YSD, 2008/06/10

• Re: [TenTec] OT: Power Pole noises, Dr. Gerald N. Johnson, 2008/06/10

[TenTec] TT Colour schemes, Steve Hunt, 2008/06/10

• Re: [TenTec] TT Colour schemes, Dr. Gerald N. Johnson, 2008/06/10
  • Re: [TenTec] TT Colour schemes, Steve Hunt, 2008/06/10
• [TenTec] TT colour schemes, Sferic, 2008/06/10
  • Re: [TenTec] TT colour schemes, Steve Hunt, 2008/06/10
    • Re: [TenTec] TT colour schemes, Rick Denney, 2008/06/10

[TenTec] TenTec 228 - TenTec 229 ATU, Marinus Loewensteijn, 2008/06/10

• Re: [TenTec] TenTec 228 - TenTec 229 ATU, Dr. Gerald N. Johnson, 2008/06/10

Re: [TenTec] OT: coax versus parallel wire, Jim WA9YSD, 2008/06/09

• Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/09
• Re: [TenTec] OT: coax versus parallel wire, Jim WA9YSD, 2008/06/10
  • Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/10
    • Re: [TenTec] OT: coax versus parallel wire, Denton, 2008/06/10
    • Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/10
• Re: [TenTec] OT: coax versus parallel wire, Marinus Loewensteijn, 2008/06/10
  • Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/10
• Re: [TenTec] OT: coax versus parallel wire, Jim WA9YSD, 2008/06/11
  • Re: [TenTec] OT: coax versus parallel wire, Dr. Gerald N. Johnson, 2008/06/12

[TenTec] Power Pole noises, Randy Hargenrader, 2008/06/09

• Re: [TenTec] Power Pole noises, WA3FIY, 2008/06/09
• Re: [TenTec] Power Pole noises, Mike Bryce, 2008/06/15
  • Re: [TenTec] Power Pole noises, k7wpz, 2008/06/15
  • Re: [TenTec] Power Pole noises, Joel R. Hallas, 2008/06/15
    • Re: [TenTec] Power Pole noises, Jim Brown K9YC, 2008/06/15
  • Re: [TenTec] Power Pole noises, Dr. Gerald N. Johnson, 2008/06/15
  • Re: [TenTec] Power Pole noises, Ron Notarius W3WN, 2008/06/15
    • Re: [TenTec] Power Pole noises, Ron Zond, 2008/06/15
    • Re: [TenTec] Power Pole noises, Ronald C. McConnell, 2008/06/16
  • Re: [TenTec] Power Pole noises, n4py, 2008/06/15
• Re: [TenTec] Power Pole noises, Jim WA9YSD, 2008/06/15

Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, brent.zook, 2008/06/09

• Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Dr. Gerald N. Johnson, 2008/06/09
  • Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Jim Brown K9YC, 2008/06/09
    • Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Dr. Gerald N. Johnson, 2008/06/09
    • [TenTec] Ferrite Data, Jim Brown K9YC, 2008/06/10
    • Re: [TenTec] Ferrite Data, Dr. Gerald N. Johnson, 2008/06/10
    • Re: [TenTec] Ferrite Data, Jim Brown K9YC, 2008/06/10

[TenTec] ho hummm...yet another month of nothing, Doug, 2008/06/08

• Re: [TenTec] ho hummm...yet another month of nothing, Andrew B. Steen, 2008/06/08
  • Re: [TenTec] ho hummm...yet another month of nothing, Doug, 2008/06/08
    • Message not available
    • Re: [TenTec] ho hummm...yet another month of nothing, Douglas Shock, 2008/06/08

Re: [TenTec] Bizuka antenna, Marinus Loewensteijn, 2008/06/07

• [TenTec] OT Re: OT OT Bizuka antenna, Ken Brown, 2008/06/08

Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to, Jim WA9YSD, 2008/06/07

• Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to, Andrew B. Steen, 2008/06/08
  • Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to, Bill Rowlett, 2008/06/08

Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Rob Atkinson, 2008/06/07

• Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Dr. Gerald N. Johnson, 2008/06/07
• Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Jim Brown K9YC, 2008/06/07

[TenTec] OT: coax versus parallel wire, insulated wire for aerial, Marinus Loewensteijn, 2008/06/06

• Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Dr. Gerald N. Johnson, 2008/06/07
  • Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Jim Brown K9YC, 2008/06/07
    • Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Darrell Bellerive, 2008/06/11
• Re: [TenTec] OT: coax versus parallel wire, insulated wire for aerial, Marinus Loewensteijn, 2008/06/07

[TenTec] Wish to switch to digest only, wa1eso@juno.com, 2008/06/06

• Re: [TenTec] Wish to switch to digest only, ron, 2008/06/06

[TenTec] band conditions??, Mike Bryce, 2008/06/06

• Re: [TenTec] band conditions??, Rick Denney, 2008/06/06
• Re: [TenTec] band conditions??, Mike Hyder -N4NT-, 2008/06/06
  • Re: [TenTec] Band conditions/BPL, ron, 2008/06/06
  • Re: [TenTec] band conditions??, Mike Bryce, 2008/06/06
    • Re: [TenTec] band conditions??, Denton, 2008/06/06
    • Re: [TenTec] band conditions??, Stan Dicks, 2008/06/06
    • Re: [TenTec] band conditions??, Mike Hyder -N4NT-, 2008/06/06
    • Re: [TenTec] band conditions??, Mike Bryce, 2008/06/06
    • Re: [TenTec] band conditions??, Dr. Gerald N. Johnson, 2008/06/07
    • Re: [TenTec] band conditions??, Stuart Rohre, 2008/06/09
• Re: [TenTec] band conditions??, John Cox, 2008/06/06
• Re: [TenTec] band conditions??, Jim WA9YSD, 2008/06/08
• Re: [TenTec] band conditions??, Jim WA9YSD, 2008/06/08
  • Re: [TenTec] band conditions??, Ralph Matheny, 2008/06/08
  • Re: [TenTec] band conditions??, Rick Denney, 2008/06/09
    • Re: [TenTec] band conditions??, Thomas Jednacz, 2008/06/09
• Re: [TenTec] band conditions??, Jim WA9YSD, 2008/06/08
  • [TenTec] OT elect grounds, Charles Harpole, 2008/06/08
    • Re: [TenTec] OT elect grounds, Dr. Gerald N. Johnson, 2008/06/09

[TenTec] How do I get removed me from the List, k5mbx, 2008/06/06

• Re: [TenTec] How do I get removed me from the List, ron, 2008/06/06

[TenTec] Italian Bazooka, Jliving39, 2008/06/06

• Re: [TenTec] Italian Bazooka, Verne Smith, 2008/06/08
  • Re: [TenTec] Italian Bazooka, W1GOR, 2008/06/08
  • Re: [TenTec] re-unsubscribe messages, ron, 2008/06/08

[TenTec] Fw: Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/05

• Re: [TenTec] Fw: Bazooka antenna.. More than you wanted to know!, Stuart Rohre, 2008/06/05
  • Re: [TenTec] Fw: Bazooka antenna.. More than you wanted to know!, Rick Prather, 2008/06/06
• Re: [TenTec] Fw: Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/06

[TenTec] Sil pads versus mica washers (mounting transistors to heatsinks), Marinus Loewensteijn, 2008/06/05

• Re: [TenTec] Sil pads versus mica washers (mounting transistors to heatsinks), Dr. Gerald N. Johnson, 2008/06/06
  • Re: [TenTec] Sil pads versus mica washers (mounting transistors to heatsinks), Stuart Rohre, 2008/06/06
• [TenTec] Sil pads versus mica washers (mounting transistors to heatsinks), Marinus Loewensteijn, 2008/06/06

[TenTec] OMNI VI+ Remote Operation, N4YG, 2008/06/05

• Re: [TenTec] OMNI VI+ Remote Operation, Ed, 2008/06/05
  • Re: [TenTec] OMNI VI+ Remote Operation, Arthur Trampler, 2008/06/05

[TenTec] Missing "B" on the Omni VII, Mike Bryce, 2008/06/04

• Re: [TenTec] Missing "B" on the Omni VII, Dudley Hurry, 2008/06/04
• Re: [TenTec] Missing "B" on the Omni VII, Alan Sewell N5NA, 2008/06/04
• [TenTec] test, please ignore, Fraser Robertson, 2008/06/05

[TenTec] Headphones, bill ogden, 2008/06/04

• Re: [TenTec] Headphones, EI6DL, 2008/06/05
• Re: [TenTec] Headphones, BOB@W2PNJ, 2008/06/07
  • Re: [TenTec] Headphones, Wayne Whitman, 2008/06/07

[TenTec] Jupiter Firmware., John Graves, 2008/06/04

• Re: [TenTec] Jupiter Firmware., Henry Mackey, 2008/06/04

Re: [TenTec] [Ten Tec] Bazooka antenna.. More than you wanted to know!, GARY HUBER, 2008/06/04

• Re: [TenTec] [Ten Tec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/05
  • Re: [TenTec] [Ten Tec] Bazooka antenna.. More than you wanted to know!, Stuart Rohre, 2008/06/05

Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/03

• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Ken Brown, 2008/06/04
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/04
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, GARY HUBER, 2008/06/04
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/04
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/04
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/04
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/04
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Marinus Loewensteijn, 2008/06/04
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/05
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, d . e . warnick, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Billy Cox, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, d . e . warnick, 2008/06/05
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Steve Hunt, 2008/06/05
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim Brown K9YC, 2008/06/05
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Stuart Rohre, 2008/06/05
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/05
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/06
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Steve Hunt, 2008/06/06
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Tim Randa, 2008/06/06
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim Brown K9YC, 2008/06/06
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/07
    • [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to know!, Darrell Gordon W4CX, 2008/06/07
    • Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to know!, Ralph Matheny, 2008/06/07
    • Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted toknow!, Tony Martin W4FOA, 2008/06/07
    • Re: [TenTec] PLEASE QSY! RE: Bazooka antenna.. More than you wanted to know!, James Duffer, 2008/06/07
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/06
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/06
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Stuart Rohre, 2008/06/06
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Stuart Rohre, 2008/06/06
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/07
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/07
    • Re: [TenTec] OT: Bazooka antenna.. More than you wanted to know!, Steve Hunt, 2008/06/08
    • Re: [TenTec] OT: Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/08
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/08
• Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim WA9YSD, 2008/06/08

[TenTec] feeding audio to rear acc on Orion II, markinkpt, 2008/06/03

• Re: [TenTec] feeding audio to rear acc on Orion II, Ron Castro, 2008/06/03

[TenTec] OT: TS-480SAT, Ron Notarius W3WN, 2008/06/02

• Re: [TenTec] OT: TS-480SAT, Chuck & Vicki Tifft, 2008/06/02

[TenTec] FOR SALE: OMNI VII WITH ANTENNA TUNER, fraz1, 2008/06/02

• Re: [TenTec] FOR SALE: OMNI VII WITH ANTENNA TUNER, Darrell Gordon W4CX, 2008/06/02

[TenTec] Logic Board, inquiring minds want to know, RLBrannigan, 2008/06/02

• Re: [TenTec] Logic Board, inquiring minds want to know, Dr. Gerald N. Johnson, 2008/06/02

[TenTec] Bazooka antenna, Michael Zeglen, 2008/06/02

• [TenTec] SINGLE Bazooka antenna, Charles Harpole, 2008/06/02
• Re: [TenTec] Bazooka antenna, Steve Hunt, 2008/06/02
  • Re: [TenTec] Bazooka antenna, Gary Hoffman, 2008/06/02
  • Re: [TenTec] Bazooka antenna, Jim Brown K9YC, 2008/06/02
  • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/02
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Steve Hunt, 2008/06/02
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Jim Brown K9YC, 2008/06/02
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Steve Hunt, 2008/06/03
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Ken Brown, 2008/06/03
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/03
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/03
    • Re: [TenTec] Bazooka antenna.. More than you wanted to know!, Dr. Gerald N. Johnson, 2008/06/03
    • [TenTec] TT sale: Omni vi, 238A tuner, 961 pwr supply, 417 banana mike, Denton, 2008/06/04
• Re: [TenTec] Bazooka antenna, Jim WA9YSD, 2008/06/02
• Re: [TenTec] Bazooka antenna, Mike Gorniak, 2008/06/07
  • Re: [TenTec] Bizuka antenna, Ken Brown, 2008/06/07
  • Re: [TenTec] Pse QSY, Darrell Gordon W4CX, 2008/06/08
    • Re: [TenTec] Pse QSY, fraz1, 2008/06/08

[TenTec] Corsair, KEN RINDFLEISCH, 2008/06/01

• Re: [TenTec] Corsair, Dr. Gerald N. Johnson, 2008/06/01
• Re: [TenTec] Corsair, Stuart Rohre, 2008/06/02
  • Re: [TenTec] Corsair, KEN RINDFLEISCH, 2008/06/03

[TenTec] 4CX-1600B conversion, Jim Miller, 2008/06/01

• Re: [TenTec] 4CX-1600B conversion, Dave Heil, 2008/06/01
  • Re: [TenTec] 4CX-1600B conversion, Ron Castro, 2008/06/01
• Re: [TenTec] 4CX-1600B conversion, alan geller, 2008/06/01

[TenTec] Omni VI Logic Board, RLBrannigan, 2008/06/01

• Re: [TenTec] Omni VI Logic Board, ron, 2008/06/01
  • Re: [TenTec] Omni VI Logic Board, Dr. Gerald N. Johnson, 2008/06/01
• Re: [TenTec] Omni VI Logic Board, dock0evz, 2008/06/04

[TenTec] Double bazooka antenna==a follow up, Mike Bryce, 2008/06/01

• Re: [TenTec] Double bazooka antenna==a follow up, GARY HUBER, 2008/06/01
  • Re: [TenTec] Double bazooka antenna==a follow up, philip c anderson, 2008/06/01
  • Re: [TenTec] Double bazooka antenna==a follow up, Mike Bryce, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, Dr. Gerald N. Johnson, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, Mike Bryce, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, w8au, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, Mike Bryce, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, John Graves, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, Mike Bryce, 2008/06/01
    • Re: [TenTec] Double bazooka antenna==a follow up, John Graves, 2008/06/01
• Re: [TenTec] Double bazooka antenna==a follow up, Mike Christiansen, 2008/06/01
• Re: [TenTec] Double bazooka antenna==a follow up, Jim WA9YSD, 2008/06/01

Re: [TenTec] OI Audio 'Pop', Bill Miner, 2008/06/01

• Re: [TenTec] OI Audio 'Pop', Bruce McLaughlin, 2008/06/01
• Re: [TenTec] OI Audio 'Pop', Fotis SV8ING, 2008/06/01
• Re: [TenTec] OI Audio 'Pop', Mark DeBord, 2008/06/01
  • Re: [TenTec] OI Audio 'Pop', starmike, 2008/06/02

[TenTec] Coax question, Lyle Dunlap, 2008/06/01

• Re: [TenTec] Coax question, Dr. Gerald N. Johnson, 2008/06/01