[Amps] Bird 43 slugs, Paul Decker, 2012/05/30

• Re: [Amps] Bird 43 slugs, Robert Groh, 2012/05/30
  • Re: [Amps] Bird 43 slugs, k7fm, 2012/05/30
  • Re: [Amps] Bird 43 slugs, Richard Solomon, 2012/05/30
• Re: [Amps] Bird 43 slugs, Gary Schafer, 2012/05/30
• Re: [Amps] Bird 43 slugs, Paul Decker, 2012/05/30
• Re: [Amps] Bird 43 slugs, Carl, 2012/05/30
• Re: [Amps] Bird 43 slugs, R. Morris, 2012/05/30
• Re: [Amps] Bird 43 slugs, kf4uth@juno.com, 2012/05/30
  • Re: [Amps] Bird 43 slugs, Tim Duffy K3LR, 2012/05/30

[Amps] Need Cushcraft 40M yagi modeling files, Carl, 2012/05/29

• Re: [Amps] Need Cushcraft 40M yagi modeling files, Sam Carpenter, 2012/05/30

[Amps] Loudenboomer, Bill Fuqua, 2012/05/26

• Re: [Amps] Loudenboomer, Jim W7RY, 2012/05/26
  • Re: [Amps] Loudenboomer, Bill Fuqua, 2012/05/26

[Amps] Fw: Question for new amateur radio operators, Ed, 2012/05/25

• Re: [Amps] Fw: Question for new amateur radio operators, donroden, 2012/05/25
  • Re: [Amps] Fw: Question for new amateur radio operators, Carl, 2012/05/25
    • Re: [Amps] Fw: Question for new amateur radio operators, Roger (K8RI), 2012/05/25
    • Re: [Amps] Fw: Question for new amateur radio operators, donroden, 2012/05/25
    • Re: [Amps] Fw: Question for new amateur radio operators, Carl Clawson, 2012/05/25
• Re: [Amps] Fw: Question for new amateur radio operators, DAVE WHITE, 2012/05/26

[Amps] Question for new amateur radio operators, Ed, 2012/05/25

• Re: [Amps] Question for new amateur radio operators, Doug Renwick, 2012/05/25
  • Re: [Amps] Question for new amateur radio operators, Roger (K8RI), 2012/05/25

Re: [Amps] Sensible filter Cap sizing (Leigh Turner), Paul Decker, 2012/05/23

• Re: [Amps] Sensible filter Cap sizing, Paul Decker, 2012/05/24

Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Leigh Turner, 2012/05/23

• Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Rob Atkinson, 2012/05/29
• Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Jim Thomson, 2012/05/23

[Amps] vl2000, Baruch Zilbershatz, 2012/05/22

• Re: [Amps] vl2000, Joe Subich, W4TV, 2012/05/22
  • Re: [Amps] vl2000, Jeff Blaine, 2012/05/22
  • Re: [Amps] vl2000, Carl, 2012/05/23
    • Re: [Amps] vl2000, Mike & Becca Krzystyniak, 2012/05/23
    • Re: [Amps] vl2000, Jack/W6NF, 2012/05/23

[Amps] RF tube performance simulator, Carel, pc5m, 2012/05/22

• [Amps] RF tube performance simulator, John Lyles, 2012/05/22

[Amps] 4-400A, Bob Sullivan, 2012/05/21

• Re: [Amps] 4-400A, Alek Petkovic, 2012/05/21

[Amps] 1 Kw PS, Doug Ronald, 2012/05/16

• [Amps] Output choke - Calculation, Máximo EA1DDO_HK1H, 2012/05/17
  • Re: [Amps] Output choke - Calculation, Roger (K8RI), 2012/05/17
    • Re: [Amps] Output choke - Calculation, Carl, 2012/05/17
    • Re: [Amps] Output choke - Calculation, Máximo EA1DDO_HK1H, 2012/05/17
  • Re: [Amps] Output choke - Calculation, Roger, 2012/05/17
  • Re: [Amps] Output choke - Calculation, Roger, 2012/05/17

[Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 2012/05/16

• [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 2012/05/16
• Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 2012/05/16
  • Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Rob Atkinson, 2012/05/16
    • Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Carl, 2012/05/16
    • Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Rob Atkinson, 2012/05/17

[Amps] preparing unsed gi7b:s?, Ulf (SM0NOR), 2012/05/15

• Re: [Amps] preparing unsed gi7b:s?, Glen Zook, 2012/05/15
  • Re: [Amps] preparing unsed gi7b:s?, Ulf (SM0NOR), 2012/05/16

[Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 2012/05/13

• Re: [Amps] Alpha 8100/GU74B Tetrode question, Leigh Turner, 2012/05/13
• Re: [Amps] Alpha 8100/GU74B Tetrode question, Carl, 2012/05/14
  • Re: [Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 2012/05/26
• Re: [Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 2012/05/13

[Amps] Transformer question, Charles Bibb, 2012/05/12

• Re: [Amps] Transformer question, Carl, 2012/05/12

[Amps] Bird 1000C Slug Needed, Richard Solomon, 2012/05/11

• [Amps] Couple Dentron DTR-2000L Questions, Mike & Becca Krzystyniak, 2012/05/12

Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 2012/05/10

• Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 2012/05/10

[Amps] ferroresonant power supplies, Danny Pease, 2012/05/10

• Re: [Amps] ferroresonant power supplies, Ron Youvan, 2012/05/10
• Re: [Amps] ferroresonant power supplies, Gary Schafer, 2012/05/10

[Amps] Solid state amplifiers - big ones, Robert Chudek - K0RC, 2012/05/08

• Re: [Amps] Solid state amplifiers - big ones, n8de, 2012/05/08
  • Re: [Amps] Solid state amplifiers - big ones, Robert Chudek - K0RC, 2012/05/08
    • Re: [Amps] Solid state amplifiers - big ones, Pete Smith N4ZR, 2012/05/08
    • Re: [Amps] Solid state amplifiers - big ones, bob finger, 2012/05/08
• Re: [Amps] Solid state amplifiers - big ones, Joe Subich, W4TV, 2012/05/08
  • Re: [Amps] Solid state amplifiers - big ones, Jeff Blaine, 2012/05/08
• [Amps] Solid state amplifiers - big ones, David Shapiro, 2012/05/10

[Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 2012/05/08

• Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 2012/05/10
  • Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Al Kozakiewicz, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Gary Schafer, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Al Kozakiewicz, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Gary Schafer, 2012/05/10
    • Message not available
    • Re: [Amps] [ham_amplifiers] RE: The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Roger (K8RI), 2012/05/11
    • Re: [Amps] [ham_amplifiers] RE: The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Bill Fuqua, 2012/05/11
    • Message not available
    • Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Bill Fuqua, 2012/05/10
  • Re: [Amps] The power of an oversized electrolytic capacitor / howmuch PS filter C is enough?, Gary Schafer, 2012/05/10
  • Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Dr. David Kirkby, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Peter Voelpel, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor / howmuch PS filter C is enough?, Leigh Turner, 2012/05/10
    • Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Roger, 2012/05/11
  • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 2012/05/11
    • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, KA4INM, 2012/05/10
    • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 2012/05/10
    • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 2012/05/10
    • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Jim Barber, 2012/05/10
    • Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 2012/05/11
• [Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 2012/05/19
  • Re: [Amps] The power of an oversized electrolytic capacitor /, Peter Voelpel, 2012/05/19
    • Re: [Amps] The power of an oversized electrolytic capacitor / pragmatism rules, Leigh Turner, 2012/05/19
  • Re: [Amps] The power of an oversized electrolytic capacitor /, Carl, 2012/05/19
    • Re: [Amps] The power of an oversized electrolytic capacitor /, Leigh Turner, 2012/05/19
    • Re: [Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 2012/05/26
    • Re: [Amps] The power of an oversized electrolytic capacitor /, Carl, 2012/05/27
• [Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 2012/05/21
  • Re: [Amps] The power of an oversized electrolytic capacitor /, Peter Voelpel, 2012/05/21

Re: [Amps] LDMOS Solid State Amplifiers, Steve Thompson, 2012/05/07

• Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 2012/05/07

[Amps] Failure Notice, chas, 2012/05/04

• [Amps] 8874's, Bob Arenella, 2012/05/06

Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/04

• Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Roger, 2012/05/07
• Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/04
  • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/04
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/04
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/04
  • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Rob Atkinson, 2012/05/04
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/04

Re: [Amps] soldering vs crimping, Roy, 2012/05/04

• Re: [Amps] soldering vs crimping, Carl, 2012/05/04

[Amps] SB 200 problem, RAY FRIESS, 2012/05/04

• Re: [Amps] SB 200 problem, Glen Zook, 2012/05/04
  • Re: [Amps] SB 200 problem, RAY FRIESS, 2012/05/04
    • Re: [Amps] SB 200 problem, Al Kozakiewicz, 2012/05/04
    • Re: [Amps] SB 200 problem, Carl, 2012/05/04
    • Re: [Amps] SB 200 problem, Joe Subich, W4TV, 2012/05/04
    • Re: [Amps] [Boatanchors] SB 200 problem, Gary Schafer, 2012/05/04
    • Re: [Amps] [Boatanchors] SB 200 problem, Alex Eban, 2012/05/06
    • Re: [Amps] SB 200 problem, Glen Zook, 2012/05/04
    • Re: [Amps] SB 200 problem, RAY FRIESS, 2012/05/04
    • Re: [Amps] SB 200 problem, Alex Eban, 2012/05/06
    • Re: [Amps] SB 200 problem, Tom Osborne, 2012/05/06
• Re: [Amps] SB 200 problem, n8de, 2012/05/04

[Amps] The power of an oversized electrolytic capacitor, Jim Thomson, 2012/05/04

• Re: [Amps] The power of an oversized electrolytic capacitor, Carl, 2012/05/04
• Re: [Amps] The power of an oversized electrolytic capacitor, Rob Atkinson, 2012/05/05
  • Re: [Amps] The power of an oversized electrolytic capacitor, Jim Thomson, 2012/05/05
  • Re: [Amps] The power of an oversized electrolytic capacitor / overkill, Leigh Turner, 2012/05/07

Re: [Amps] Fwd: Re: soldering vs crimping, Ward Silver, 2012/05/03

• Re: [Amps] Fwd: Re: soldering vs crimping, k7fm, 2012/05/03
  • Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Robert Logan, 2012/05/04
• Re: [Amps] Fwd: Re: soldering vs crimping, donroden, 2012/05/04
• Re: [Amps] Fwd: Re: soldering vs crimping, TexasRF, 2012/05/03
  • Re: [Amps] The power of an oversized electrolytic capacitor, k7fm, 2012/05/03

[Amps] Antenna tuner loss, Dan Hearn, 2012/05/03

• Re: [Amps] Antenna tuner loss, Shon Edwards, 2012/05/03
• Re: [Amps] Antenna tuner loss, Roger (K8RI), 2012/05/04
  • Re: [Amps] Antenna tuner loss, Carl, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Tom Thompson, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Rob Atkinson, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Jim Barber, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Rob Atkinson, 2012/05/04
    • Re: [Amps] Antenna tuner loss, W2XJ, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Carl, 2012/05/04
    • Re: [Amps] Antenna tuner loss, W2XJ, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Bill Fuqua, 2012/05/04
    • Re: [Amps] Antenna tuner loss, Rob Atkinson, 2012/05/05
    • Message not available
    • Re: [Amps] Antenna tuner loss, Bill Fuqua, 2012/05/05
    • Re: [Amps] Antenna tuner loss, Carl, 2012/05/06
• [Amps] Antenna tuner loss, Jim Thomson, 2012/05/05
  • Re: [Amps] Antenna tuner loss, Carl, 2012/05/05

Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?, Roger, 2012/05/03

• Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?, Roger, 2012/05/03

[Amps] water or vapour phased cooling for SS, Jim Thomson, 2012/05/03

• Re: [Amps] water or vapour phased cooling for SS, Rob Atkinson, 2012/05/03
• Re: [Amps] water or vapour phased cooling for SS, gdaught6, 2012/05/03

[Amps] PL-259 and SO-239 cable attachments, Gene May, 2012/05/02

• Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 2012/05/02
• Re: [Amps] PL-259 and SO-239 cable attachments, Alex Eban, 2012/05/02
• Re: [Amps] PL-259 and SO-239 cable attachments, W4ABW, 2012/05/02
  • Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 2012/05/02
  • Re: [Amps] PL-259 and SO-239 cable attachments, Glen Zook, 2012/05/02
    • Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 2012/05/02

[Amps] amps with vacuum pumps, Pete Smith N4ZR, 2012/05/02

• Re: [Amps] amps with vacuum pumps, Joe Subich, W4TV, 2012/05/02
  • Re: [Amps] amps with vacuum pumps, Gary Schafer, 2012/05/02
    • Re: [Amps] amps with vacuum pumps, Pete Lancashire, 2012/05/02
• Re: [Amps] amps with vacuum pumps, Roger (K8RI), 2012/05/02
• Re: [Amps] amps with vacuum pumps, Roger, 2012/05/03

Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 2012/05/01

• Re: [Amps] A76pa glitch on warm up, Charlie Young, 2012/05/02
  • Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 2012/05/02
    • Re: [Amps] A76pa glitch on warm up, Carl, 2012/05/02
    • Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 2012/05/02

[Amps] MW-1A, donroden, 2012/05/01

• Re: [Amps] MW-1A, Paul Manuel, 2012/05/01
• Re: [Amps] MW-1A, Jeff DePolo, 2012/05/01

[Amps] SWR increase on SB-220 input, Pete Smith N4ZR, 2012/05/01

• Message not available
  • Re: [Amps] SWR increase on SB-220 input - my face is red, Pete Smith N4ZR, 2012/05/01
    • Re: [Amps] SWR increase on SB-220 input - my face is red, Carl, 2012/05/01
    • Re: [Amps] SWR increase on SB-220 input - my face is red, Vic K2VCO, 2012/05/01
    • Re: [Amps] SWR increase on SB-220 input - my face is red, Carl, 2012/05/01
    • Re: [Amps] SWR increase on SB-220 input - my face is red, Jim W7RY, 2012/05/01
    • [Amps] SB-220 in storage, how to maintain it ???, chas, 2012/05/04
    • Re: [Amps] SB-220 in storage, how to maintain it ???, Carl, 2012/05/04
    • Re: [Amps] SB-220 in storage, how to maintain it ???, Charles Harpole, 2012/05/05
    • Message not available
    • [Amps] storing radios???, Charles Harpole, 2012/05/05
    • Re: [Amps] storing radios???, donroden, 2012/05/05

Re: [Amps] Tubes vs. Solid State, Jim Garland, 2012/05/01

• [Amps] Tubes vs. Solid State, Adrian, 2012/05/01
• Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/01
  • Re: [Amps] Tubes vs. Solid State, Al Kozakiewicz, 2012/05/01
  • Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 2012/05/01
    • Re: [Amps] Tubes vs. Solid State, donroden, 2012/05/01
    • Re: [Amps] Tubes vs. Solid State, Roger, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Larry Benko, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/07
    • Re: [Amps] Tubes vs. Solid State, Larry Benko, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/07
    • Re: [Amps] Tubes vs. Solid State, Alex Eban, 2012/05/03
    • Re: [Amps] Tubes vs. Solid State, Pete Smith N4ZR, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Paul Christensen, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Pete Smith N4ZR, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Carl, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Dave Hachadorian, 2012/05/02
    • Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 2012/05/02
    • [Amps] Tubes vs. Solid State, Doug Ronald, 2012/05/02
• Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/01
  • Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 2012/05/01
    • Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 2012/05/01
• Re: [Amps] Tubes vs. Solid State, John Lyles, 2012/05/01
• Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/02
  • Re: [Amps] Tubes vs. Solid State, Tom Thompson, 2012/05/02
  • [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Roger (K8RI), 2012/05/03
    • Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 2012/05/04
• [Amps] Tubes vs. Solid State, Jim Thomson, 2012/05/03
  • Re: [Amps] Tubes vs. Solid State, Carl, 2012/05/03
  • Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 2012/05/03
  • Re: [Amps] Tubes vs. Solid State, Roger, 2012/05/07
• Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/03
  • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/03
  • Re: [Amps] Tubes vs. Solid State, Alex Eban, 2012/05/04
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/04
  • Re: [Amps] Tubes vs. Solid State, Tom Thompson, 2012/05/04
    • Re: [Amps] Tubes vs. Solid State, Bob Henderson, 2012/05/04
    • Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Roger (K8RI), 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 2012/05/06
    • Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 2012/05/06
    • Re: [Amps] LDMOS Solid State Amplifiers, Bob Henderson, 2012/05/05
    • Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 2012/05/06
    • Re: [Amps] LDMOS Solid State Amplifiers, Joe Subich, W4TV, 2012/05/06
    • Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 2012/05/06
• Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/03
• [Amps] Tubes vs. Solid State, Jim Thomson, 2012/05/04

Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 2012/05/01

• Re: [Amps] every db lost re Tubes vs. Solid State, gdaught6, 2012/05/01
  • Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Rob Atkinson, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Carl, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 2012/05/01
• Message not available
  • Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 2012/05/02
    • Re: [Amps] every db lost re Tubes vs. Solid State, Gary Schafer, 2012/05/02
    • [Amps] Mismatch loss, Larry Benko, 2012/05/02
    • Re: [Amps] Mismatch loss, n8de, 2012/05/02
    • Re: [Amps] Mismatch loss, Tom Thompson, 2012/05/02
    • Re: [Amps] Mismatch loss, Larry Benko, 2012/05/02
    • Re: [Amps] Mismatch loss, Jim Brown, 2012/05/02
    • Re: [Amps] Mismatch loss, Paul Christensen, 2012/05/02
    • Re: [Amps] Mismatch loss, Larry Benko, 2012/05/02
    • Re: [Amps] Mismatch loss, Jim Brown, 2012/05/03
    • Re: [Amps] Mismatch loss, Gary Schafer, 2012/05/03
    • Re: [Amps] Mismatch loss, Carl, 2012/05/03
    • Re: [Amps] Mismatch loss, Jeff DePolo, 2012/05/03
    • Re: [Amps] every db lost re Tubes vs. Solid State, Tom Thompson, 2012/05/02
• Re: [Amps] every db lost re Tubes vs. Solid State, Manfred Mornhinweg, 2012/05/01
  • Re: [Amps] every db lost re Tubes vs. Solid State, David C. Hallam, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Sam Carpenter, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Martin A Flynn, 2012/05/01
    • Re: [Amps] every db lost re Tubes vs. Solid State, Carl, 2012/05/01
    • [Amps] soldering vs crimping, Charles Harpole, 2012/05/01
    • Re: [Amps] soldering vs crimping, Carl, 2012/05/02
    • Re: [Amps] soldering vs crimping, Dick Green WC1M, 2012/05/02
    • [Amps] Fwd: Re: soldering vs crimping, Ron Youvan, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Vic K2VCO, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Dick Green WC1M, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, k7fm, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Gary Smith, 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Alek Petkovic, 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, donroden, 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Ron Youvan, 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 2012/05/03
    • Re: [Amps] Fwd: Re: soldering vs crimping, Paul Christensen, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Dick Green WC1M, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Alex Eban, 2012/05/02
    • Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 2012/05/02
    • Re: [Amps] soldering vs crimping, Vic K2VCO, 2012/05/02
    • [Amps] brittle shields? and soldering vs crimping, Charles Harpole, 2012/05/02
    • Re: [Amps] brittle shields? and soldering vs crimping, Carl, 2012/05/02
    • Re: [Amps] brittle shields? and soldering vs crimping, Dick Green WC1M, 2012/05/02
    • Re: [Amps] brittle shields? and soldering vs crimping, Roger, 2012/05/03
    • Re: [Amps] brittle shields? and soldering vs crimping, Roger (K8RI), 2012/05/02
    • Re: [Amps] brittle shields? and soldering vs crimping, Alex Eban, 2012/05/02
    • Re: [Amps] soldering vs crimping, Alex Eban, 2012/05/02
    • Re: [Amps] soldering vs crimping, donroden, 2012/05/03
    • Re: [Amps] soldering vs crimping, Dick Green WC1M, 2012/05/03
    • Re: [Amps] soldering vs crimping, Glen Zook, 2012/05/03
    • Re: [Amps] soldering vs crimping, Alex Eban, 2012/05/04
    • Re: [Amps] soldering vs crimping, Roger (K8RI), 2012/05/04
• [Amps] every db lost re Tubes vs. Solid State, Jim Thomson, 2012/05/03
• Re: [Amps] every db lost re Tubes vs. Solid State, Roger, 2012/05/03

[Amps] New Heat Transport Links, Interesting, Sam Carpenter, 2012/05/01

• Re: [Amps] New Heat Transport Links, Interesting, Roger (K8RI), 2012/05/01

Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Paul Christensen, 2012/05/01

• Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Sam Carpenter, 2012/05/01
  • Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, W2XJ, 2012/05/01
  • Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Roger (K8RI), 2012/05/01
    • Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Paul Christensen, 2012/05/01
• Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Joe Subich, W4TV, 2012/05/01
• Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Alex Eban, 2012/05/01
• Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Roger (K8RI), 2012/05/01

[Amps] SWR increase on SB-220 input, Pete Smith N4ZR, 2012/05/01

• Re: [Amps] SWR increase on SB-220 input, Joe Subich, W4TV, 2012/05/01

[Amps] AL811H metering, Bob Henderson, 2012/05/01

• Re: [Amps] AL811H metering, Tom Horton, 2012/05/01
  • Re: [Amps] AL811H metering, Fortra, 2012/05/01