Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

May 30, 2012

Re: [Amps] Bird 43 slugs, Tim Duffy K3LR, 20:27
Re: [Amps] Bird 43 slugs, kf4uth@juno.com, 20:07
[Amps] High Voltage FWB Rectifiers, Charles Bibb, 19:31
Re: [Amps] Bird 43 slugs, Richard Solomon, 19:03
Re: [Amps] Bird 43 slugs, R. Morris, 18:58
Re: [Amps] Bird 43 slugs, Carl, 18:57
Re: [Amps] Bird 43 slugs, Paul Decker, 18:50
Re: [Amps] Bird 43 slugs, k7fm, 18:46
Re: [Amps] Bird 43 slugs, Gary Schafer, 18:36
Re: [Amps] Bird 43 slugs, Robert Groh, 18:35
[Amps] Bird 43 slugs, Paul Decker, 18:06
[Amps] HT-41 plate transformer FS?, Jack/W6NF, 13:30
Re: [Amps] Need Cushcraft 40M yagi modeling files, Sam Carpenter, 05:21

May 29, 2012

[Amps] SB-200FS, Paul Kraemer, 19:44
[Amps] Need Cushcraft 40M yagi modeling files, Carl, 15:09
Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Rob Atkinson, 07:57
[Amps] Available parts for PA, ux3lv, 06:02

May 27, 2012

Re: [Amps] The power of an oversized electrolytic capacitor /, Carl, 06:52

May 26, 2012

Re: [Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 15:06
Re: [Amps] Loudenboomer, Bill Fuqua, 14:27
Re: [Amps] Loudenboomer, Jim W7RY, 07:52
[Amps] Loudenboomer, Bill Fuqua, 07:37
Re: [Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 02:27
[Amps] Sensible filter Cap sizing, Jim Thomson, 01:55
Re: [Amps] Fw: Question for new amateur radio operators, DAVE WHITE, 00:17

May 25, 2012

Re: [Amps] Fw: Question for new amateur radio operators, Carl Clawson, 20:08
Re: [Amps] Fw: Question for new amateur radio operators, donroden, 18:23
Re: [Amps] Question for new amateur radio operators, Roger (K8RI), 17:25
Re: [Amps] Fw: Question for new amateur radio operators, Roger (K8RI), 17:11
Re: [Amps] Question for new amateur radio operators, Doug Renwick, 17:05
Re: [Amps] Fw: Question for new amateur radio operators, Carl, 16:57
Re: [Amps] Fw: Question for new amateur radio operators, donroden, 16:38
[Amps] Fw: Question for new amateur radio operators, Ed, 14:34
[Amps] Question for new amateur radio operators, Ed, 13:34
[Amps] New Kid on the Block, Richard Solomon, 10:20

May 24, 2012

Re: [Amps] Sensible filter Cap sizing, Paul Decker, 04:33

May 23, 2012

Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Jim Thomson, 20:14
Re: [Amps] Sensible filter Cap sizing (Leigh Turner), Paul Decker, 16:46
[Amps] gs-35b, Carey Lockhart, KC5GTT, 15:31
Re: [Amps] vl2000, Jack/W6NF, 11:49
Re: [Amps] vl2000, Mike & Becca Krzystyniak, 07:24
Re: [Amps] vl2000, Carl, 06:51
Re: [Amps] [ham_amplifiers] Re: Sensible filter Cap sizing, Leigh Turner, 03:35

May 22, 2012

Re: [Amps] vl2000, Jeff Blaine, 21:02
Re: [Amps] vl2000, Joe Subich, W4TV, 20:22
[Amps] Transistors THP 80V., Óscar Luis Fernández Lanza, 13:15
[Amps] RF tube performance simulator, John Lyles, 12:31
[Amps] vl2000, Baruch Zilbershatz, 09:23
[Amps] RF tube performance simulator, Carel, pc5m, 05:34
Re: [Amps] [ham_amplifiers] The power of an oversized electrolytic capacitor / pragmatism rules, Leigh Turner, 04:08

May 21, 2012

Re: [Amps] 4-400A, Alek Petkovic, 16:07
[Amps] WTB Vacuum vairable, RICHARD GEORGE, 15:33
[Amps] 4-400A, Bob Sullivan, 14:34
[Amps] Lost Buyer, Bill Fuqua, 10:06
Re: [Amps] The power of an oversized electrolytic capacitor /, Peter Voelpel, 07:30
[Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 06:51

May 20, 2012

[Amps] YAESU VL-2000, Richard Solomon, 08:58

May 19, 2012

Re: [Amps] The power of an oversized electrolytic capacitor /, Leigh Turner, 19:14
Re: [Amps] The power of an oversized electrolytic capacitor / pragmatism rules, Leigh Turner, 19:01
Re: [Amps] The power of an oversized electrolytic capacitor /, Carl, 09:25
Re: [Amps] The power of an oversized electrolytic capacitor /, Peter Voelpel, 08:29
[Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 07:33
[Amps] Output choke - Calculation, Jim Thomson, 04:35

May 17, 2012

Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Rob Atkinson, 08:55
Re: [Amps] Output choke - Calculation, Roger, 08:12
Re: [Amps] Output choke - Calculation, Roger, 08:12
Re: [Amps] Output choke - Calculation, Máximo EA1DDO_HK1H, 08:09
Re: [Amps] Output choke - Calculation, Carl, 05:18
Re: [Amps] Output choke - Calculation, Roger (K8RI), 01:26
[Amps] Output choke - Calculation, Máximo EA1DDO_HK1H, 00:52

May 16, 2012

Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Carl, 16:24
[Amps] 1 Kw PS, Doug Ronald, 15:24
Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Rob Atkinson, 13:33
Re: [Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 13:21
[Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 07:24
[Amps] Fw: Eddie Hatcher: How are you coming on my 32v2? 4 1/2 years now, Ed, 07:21
Re: [Amps] [ham_amplifiers] Re: Power factor!, Leigh Turner, 03:49
Re: [Amps] preparing unsed gi7b:s?, Ulf (SM0NOR), 00:35

May 15, 2012

Re: [Amps] preparing unsed gi7b:s?, Glen Zook, 15:04
[Amps] preparing unsed gi7b:s?, Ulf (SM0NOR), 12:31

May 14, 2012

Re: [Amps] Alpha 8100/GU74B Tetrode question, Carl, 07:43

May 13, 2012

Re: [Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 20:38
Re: [Amps] Alpha 8100/GU74B Tetrode question, Leigh Turner, 18:53
[Amps] Alpha 8100/GU74B Tetrode question, Gary K9GS, 12:10
[Amps] Smith Chart Software (Free), Jim Brown, 08:27

May 12, 2012

[Amps] Off Topic - Dayton DX Dinner tickets available, Gary E. Jones, 19:52
[Amps] gla 1000b on 6, W5JMW, 18:52
Re: [Amps] Transformer question, Carl, 18:31
[Amps] Transformer question, Charles Bibb, 14:58
[Amps] Couple Dentron DTR-2000L Questions, Mike & Becca Krzystyniak, 08:21

May 11, 2012

[Amps] Bird 1000C Slug Needed, Richard Solomon, 09:51
Re: [Amps] [ham_amplifiers] RE: The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Bill Fuqua, 08:31
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Roger, 08:23
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 08:23
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 08:23
Re: [Amps] [ham_amplifiers] RE: The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Roger (K8RI), 08:22

May 10, 2012

[Amps] FW: [ham_amplifiers] RE: Typo correction, Leigh Turner, 19:27
Re: [Amps] ferroresonant power supplies, Gary Schafer, 19:23
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 19:22
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 18:47
Re: [Amps] The power of an oversized electrolytic capacitor / howmuch PS filter C is enough?, Leigh Turner, 18:35
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 18:21
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Jim Barber, 18:08
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, Ron Youvan, 17:43
Re: [Amps] ferroresonant power supplies, Ron Youvan, 17:25
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Peter Voelpel, 15:16
[Amps] ferroresonant power supplies, Danny Pease, 14:57
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Dr. David Kirkby, 14:20
Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Bill Fuqua, 09:47
Re: [Amps] The power of an oversized electrolytic capacitor /howmuch PS filter C is enough?, Gary Schafer, 09:35
Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Al Kozakiewicz, 08:46
Re: [Amps] The power of an oversized electrolytic capacitor / howmuch PS filter C is enough?, Gary Schafer, 08:39
Re: [Amps] The power of an oversized electrolytic capacitor /how much PS filter C is enough?, Gary Schafer, 08:21
Re: [Amps] The power of an over sized electrolytic capacitor / how much PS filter C is enough?, KA4INM, 08:00
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Al Kozakiewicz, 06:34
Re: [Amps] The power of an oversized electrolytic capacitor / how much PS filter C is enough?, Leigh Turner, 04:20
[Amps] Solid state amplifiers - big ones, David Shapiro, 01:26

May 08, 2012

[Amps] LDMOS Solid State Amplifiers For Sale (Price Reduced), Richard Solomon, 22:15
Re: [Amps] Solid state amplifiers - big ones, bob finger, 12:17
Re: [Amps] Solid state amplifiers - big ones, Pete Smith N4ZR, 12:05
Re: [Amps] Solid state amplifiers - big ones, Jeff Blaine, 10:02
Re: [Amps] Solid state amplifiers - big ones, Joe Subich, W4TV, 09:52
Re: [Amps] Solid state amplifiers - big ones, Robert Chudek - K0RC, 09:37
Re: [Amps] Solid state amplifiers - big ones, n8de, 09:24
[Amps] Solid state amplifiers - big ones, Robert Chudek - K0RC, 09:21
[Amps] The power of an oversized electrolytic capacitor /, Jim Thomson, 00:50

May 07, 2012

Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Roger, 20:10
Re: [Amps] Tubes vs. Solid State, Roger, 20:10
Re: [Amps] The power of an oversized electrolytic capacitor / overkill, Leigh Turner, 20:09
Re: [Amps] Tubes vs. Solid State, Bob Henderson, 20:09
Re: [Amps] Tubes vs. Solid State, Bob Henderson, 20:09
Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 13:31
[Amps] Relay for LA-1000A, Robert Logan, 07:52
Re: [Amps] LDMOS Solid State Amplifiers, Steve Thompson, 00:29

May 06, 2012

[Amps] 1296 amplifier, Carey Lockhart, 20:09
[Amps] 8874's, Bob Arenella, 18:53
Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 18:00
Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 12:49
Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 12:04
[Amps] LDMOS Solid State Amplifiers For Sale, Richard Solomon, 11:21
Re: [Amps] LDMOS Solid State Amplifiers, Joe Subich, W4TV, 10:44
Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 09:42
Re: [Amps] Antenna tuner loss, Carl, 09:31
Re: [Amps] SB 200 problem, Tom Osborne, 08:04
Re: [Amps] SB 200 problem, Alex Eban, 04:11
Re: [Amps] [Boatanchors] SB 200 problem, Alex Eban, 04:07

May 05, 2012

Re: [Amps] LDMOS Solid State Amplifiers, Bob Henderson, 22:33
Re: [Amps] Antenna tuner loss, Bill Fuqua, 21:42
[Amps] Test message, Leigh Turner, 18:55
Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 17:53
[Amps] hv transformer, BRUNO FIGUEIRA, 13:30
Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 12:15
Re: [Amps] LDMOS Solid State Amplifiers, Roger (K8RI), 11:35
Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer, 11:01
Re: [Amps] storing radios???, donroden, 09:19
[Amps] storing radios???, Charles Harpole, 09:14
Re: [Amps] SB-220 in storage, how to maintain it ???, Charles Harpole, 08:32
Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson, 08:30
Re: [Amps] Antenna tuner loss, Carl, 07:57
[Amps] Antenna tuner loss, Jim Thomson, 06:12
Re: [Amps] The power of an oversized electrolytic capacitor, Jim Thomson, 05:38
Re: [Amps] The power of an oversized electrolytic capacitor, Rob Atkinson, 04:22
Re: [Amps] Antenna tuner loss, Rob Atkinson, 03:59

May 04, 2012

Re: [Amps] Tubes vs. Solid State, Bob Henderson, 23:00
Re: [Amps] Fwd: Re: soldering vs crimping, Robert Logan, 22:08
Re: [Amps] Antenna tuner loss, Bill Fuqua, 21:54
Re: [Amps] Antenna tuner loss, W2XJ, 19:43
Re: [Amps] Antenna tuner loss, Carl, 18:52
Re: [Amps] Antenna tuner loss, Rob Atkinson, 18:49
Re: [Amps] SB-220 in storage, how to maintain it ???, Carl, 18:49
[Amps] Failure Notice, chas, 17:23
Re: [Amps] Tubes vs. Solid State, Tom Thompson, 16:43
[Amps] SB-220 in storage, how to maintain it ???, chas, 16:40
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 14:35
Re: [Amps] Antenna tuner loss, W2XJ, 14:22
Re: [Amps] Antenna tuner loss, Jim Barber, 14:13
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Rob Atkinson, 14:06
Re: [Amps] Antenna tuner loss, Rob Atkinson, 14:00
Re: [Amps] soldering vs crimping, Carl, 12:00
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 11:59
Re: [Amps] SB 200 problem, Carl, 11:56
Re: [Amps] The power of an oversized electrolytic capacitor, Carl, 11:46
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 11:35
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 11:19
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 10:53
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 10:51
Re: [Amps] SB 200 problem, RAY FRIESS, 09:49
Re: [Amps] SB 200 problem, Glen Zook, 09:14
Re: [Amps] [Boatanchors] SB 200 problem, Gary Schafer, 08:21
Re: [Amps] SB 200 problem, Joe Subich, W4TV, 08:16
Re: [Amps] soldering vs crimping, Roy, 08:04
Re: [Amps] SB 200 problem, Al Kozakiewicz, 08:00
Re: [Amps] SB 200 problem, n8de, 07:58
Re: [Amps] SB 200 problem, RAY FRIESS, 07:57
Re: [Amps] SB 200 problem, Glen Zook, 07:55
[Amps] SB 200 problem, RAY FRIESS, 07:30
[Amps] The power of an oversized electrolytic capacitor, Jim Thomson, 07:28
Re: [Amps] Antenna tuner loss, Tom Thompson, 06:37
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 06:34
Re: [Amps] Antenna tuner loss, Carl, 06:23
Re: [Amps] Fwd: Re: soldering vs crimping, donroden, 04:29
[Amps] Tubes vs. Solid State, Jim Thomson, 04:05
Re: [Amps] Tubes vs. Solid State, Bob Henderson, 03:41
Re: [Amps] Tubes vs. Solid State, Alex Eban, 03:33
Re: [Amps] soldering vs crimping, Alex Eban, 03:16
Re: [Amps] Antenna tuner loss, Roger (K8RI), 00:32
Re: [Amps] soldering vs crimping, Roger (K8RI), 00:01

May 03, 2012

Re: [Amps] Tubes vs. Solid State, Bob Henderson, 21:18
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Roger (K8RI), 20:52
Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 20:33
Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 19:21
Re: [Amps] The power of an oversized electrolytic capacitor, k7fm, 19:20
Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 19:12
Re: [Amps] Fwd: Re: soldering vs crimping, TexasRF, 19:09
Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 19:09
Re: [Amps] Fwd: Re: soldering vs crimping, k7fm, 18:50
Re: [Amps] Fwd: Re: soldering vs crimping, Ward Silver, 18:36
Re: [Amps] Fwd: Re: soldering vs crimping, Roger (K8RI), 18:28
Re: [Amps] Mismatch loss, Jeff DePolo, 18:21
Re: [Amps] Mismatch loss, Carl, 17:45
Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 17:41
Re: [Amps] Mismatch loss, Gary Schafer, 16:47
Re: [Amps] Fwd: Re: soldering vs crimping, Ron Youvan, 16:45
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 16:19
Re: [Amps] Fwd: Re: soldering vs crimping, donroden, 15:40
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 15:36
Re: [Amps] Fwd: Re: soldering vs crimping, Alek Petkovic, 15:32
Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 15:20
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 15:20
Re: [Amps] Fwd: Re: soldering vs crimping, Gary Smith, 15:14
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 15:04
Re: [Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), W2XJ, 14:29
[Amps] Why are we building amps rather then transmitters? (Tubes vs. Solid State), Dan Mills, 13:37
Re: [Amps] soldering vs crimping, Glen Zook, 12:43
Re: [Amps] Tubes vs. Solid State, Bob Henderson, 11:37
Re: [Amps] Tubes vs. Solid State, Larry Benko, 11:16
Re: [Amps] Tubes vs. Solid State, Alex Eban, 11:09
Re: [Amps] Tubes vs. Solid State, Larry Benko, 10:41
Re: [Amps] Tubes vs. Solid State, Carl, 10:30
Re: [Amps] Antenna tuner loss, Shon Edwards, 10:26
Re: [Amps] Tubes vs. Solid State, Bob Henderson, 10:23
Re: [Amps] Mismatch loss, Jim Brown, 10:18
Re: [Amps] soldering vs crimping, Dick Green WC1M, 10:06
[Amps] Antenna tuner loss, Dan Hearn, 09:32
Re: [Amps] water or vapour phased cooling for SS, gdaught6, 09:17
Re: [Amps] brittle shields? and soldering vs crimping, Roger, 08:49
Re: [Amps] amps with vacuum pumps, Roger, 08:49
Re: [Amps] Tubes vs. Solid State, Roger, 08:49
Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA:AnyOpinions ?, Roger, 08:49
Re: [Amps] every db lost re Tubes vs. Solid State, Roger, 08:49
Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?, Roger, 08:49
Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any Opinions ?, Roger, 08:49
[Amps] Tubes vs. Solid State, Jim Thomson, 08:46
[Amps] Life of 3CX800 tubes, ENRIQUE RABCZUK SARAVIA, 08:46
Re: [Amps] water or vapour phased cooling for SS, Rob Atkinson, 07:33
[Amps] water or vapour phased cooling for SS, Jim Thomson, 05:57
Re: [Amps] soldering vs crimping, donroden, 04:35
[Amps] every db lost re Tubes vs. Solid State, Jim Thomson, 03:31

May 02, 2012

Re: [Amps] PL-259 and SO-239 cable attachments, Alex Eban, 23:27
Re: [Amps] brittle shields? and soldering vs crimping, Alex Eban, 23:19
Re: [Amps] Fwd: Re: soldering vs crimping, Alex Eban, 22:52
Re: [Amps] soldering vs crimping, Alex Eban, 22:51
Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 21:34
Re: [Amps] Tubes vs. Solid State, Tom Thompson, 20:18
Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 19:34
Re: [Amps] Mismatch loss, Larry Benko, 18:21
Re: [Amps] Mismatch loss, Paul Christensen, 17:46
Re: [Amps] Fwd: Re: soldering vs crimping, k7fm, 17:31
Re: [Amps] Mismatch loss, Jim Brown, 17:14
Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 14:16
Re: [Amps] PL-259 and SO-239 cable attachments, Glen Zook, 14:14
Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 14:10
Re: [Amps] PL-259 and SO-239 cable attachments, W4ABW, 14:05
Re: [Amps] brittle shields? and soldering vs crimping, Roger (K8RI), 14:01
Re: [Amps] PL-259 and SO-239 cable attachments, Steve Katz, 14:00
[Amps] PL-259 and SO-239 cable attachments, Gene May, 13:55
Re: [Amps] every db lost re Tubes vs. Solid State, Tom Thompson, 12:57
Re: [Amps] brittle shields? and soldering vs crimping, Dick Green WC1M, 12:56
Re: [Amps] Fwd: Re: soldering vs crimping, Dick Green WC1M, 12:51
Re: [Amps] Fwd: Re: soldering vs crimping, Dick Green WC1M, 12:51
Re: [Amps] Mismatch loss, Larry Benko, 12:50
[Amps] Tubes vs. Solid State, Doug Ronald, 12:48
Re: [Amps] Mismatch loss, Tom Thompson, 12:41
[Amps] ALS-600 QSK, kingwood, 12:33
Re: [Amps] Mismatch loss, n8de, 12:23
Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 12:01
Re: [Amps] Fwd: Re: soldering vs crimping, Carl, 11:56
Re: [Amps] A76pa glitch on warm up, Carl, 11:56
Re: [Amps] brittle shields? and soldering vs crimping, Carl, 11:56
Re: [Amps] Tubes vs. Solid State, Carl, 11:44
[Amps] Mismatch loss, Larry Benko, 11:42
Re: [Amps] every db lost re Tubes vs. Solid State, Gary Schafer, 10:41
[Amps] brittle shields? and soldering vs crimping, Charles Harpole, 10:40
Re: [Amps] Fwd: Re: soldering vs crimping, Paul Christensen, 10:35
Re: [Amps] amps with vacuum pumps, Roger (K8RI), 10:32
Re: [Amps] Fwd: Re: soldering vs crimping, Vic K2VCO, 10:14
Re: [Amps] soldering vs crimping, Vic K2VCO, 10:12
[Amps] Fwd: Re: soldering vs crimping, Ron Youvan, 10:00
Re: [Amps] soldering vs crimping, Dick Green WC1M, 09:51
Re: [Amps] amps with vacuum pumps, Pete Lancashire, 09:48
Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 09:45
Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 08:42
Re: [Amps] amps with vacuum pumps, Gary Schafer, 08:30
Re: [Amps] amps with vacuum pumps, Joe Subich, W4TV, 08:25
[Amps] amps with vacuum pumps, Pete Smith N4ZR, 08:12
Re: [Amps] Tubes vs. Solid State, Pete Smith N4ZR, 08:09
Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 07:29
Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 07:26
Re: [Amps] Tubes vs. Solid State, Dave Hachadorian, 07:10
Re: [Amps] Tubes vs. Solid State, Paul Christensen, 07:06
Re: [Amps] soldering vs crimping, Carl, 06:36
Re: [Amps] A76pa glitch on warm up, Charlie Young, 05:14
Re: [Amps] Tubes vs. Solid State, Pete Smith N4ZR, 03:44

May 01, 2012

Re: [Amps] A76pa glitch on warm up, Jeff Blaine, 21:32
[Amps] soldering vs crimping, Charles Harpole, 21:26
Re: [Amps] Tubes vs. Solid State, donroden, 20:01
Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 19:39
Re: [Amps] Tubes vs. Solid State, Roger (K8RI), 19:07
Re: [Amps] SWR increase on SB-220 input - my face is red, Carl, 18:19
Re: [Amps] MW-1A, Jeff DePolo, 17:42
Re: [Amps] SWR increase on SB-220 input - my face is red, Vic K2VCO, 16:53
Re: [Amps] MW-1A, Paul Manuel, 16:47
Re: [Amps] SWR increase on SB-220 input - my face is red, Jim W7RY, 16:47
[Amps] MW-1A, donroden, 15:27
Re: [Amps] Tubes vs. Solid State, Joe Subich, W4TV, 15:16
Re: [Amps] SWR increase on SB-220 input - my face is red, Carl, 15:04
Re: [Amps] Tubes vs. Solid State, John Lyles, 15:01
Re: [Amps] every db lost re Tubes vs. Solid State, Carl, 14:55
Re: [Amps] SWR increase on SB-220 input - my face is red, Pete Smith N4ZR, 14:37
Re: [Amps] every db lost re Tubes vs. Solid State, Martin A Flynn, 14:19
Re: [Amps] New Heat Transport Links, Interesting, Roger (K8RI), 14:15
Re: [Amps] every db lost re Tubes vs. Solid State, Sam Carpenter, 13:50
Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 13:37
Re: [Amps] every db lost re Tubes vs. Solid State, David C. Hallam, 13:33
[Amps] Fw: Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Paul Christensen, 13:26
Re: [Amps] every db lost re Tubes vs. Solid State, Manfred Mornhinweg, 13:13
Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 13:06
Re: [Amps] every db lost re Tubes vs. Solid State, Carl, 12:59
[Amps] Tubes vs. Solid State, Adrian, 12:58
Re: [Amps] Tubes vs. Solid State, Al Kozakiewicz, 12:49
Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg, 12:35
Re: [Amps] every db lost re Tubes vs. Solid State, Rob Atkinson, 11:53
Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 11:22
Re: [Amps] every db lost re Tubes vs. Solid State, gdaught6, 11:16
Re: [Amps] AL811H metering, Fortra, 11:16
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Paul Christensen, 10:38
[Amps] SWR increase on SB-220 input, Pete Smith N4ZR, 10:38
Re: [Amps] Tubes vs. Solid State, Jim Garland, 10:27
Re: [Amps] every db lost re Tubes vs. Solid State, Jim Brown, 10:17
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Roger (K8RI), 10:13
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Roger (K8RI), 09:58
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Alex Eban, 09:48
[Amps] Corrected Second Linck, Sam Carpenter, 08:35
[Amps] New Heat Transport Links, Interesting, Sam Carpenter, 08:33
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Joe Subich, W4TV, 08:31
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, W2XJ, 08:23
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Sam Carpenter, 08:17
Re: [Amps] AL811H metering, Tom Horton, 08:07
Re: [Amps] Tubes vs. Solid State (was) Expert Amps2K-FA:AnyOpinions?, Paul Christensen, 07:59
Re: [Amps] SWR increase on SB-220 input, Joe Subich, W4TV, 06:58
[Amps] SWR increase on SB-220 input, Pete Smith N4ZR, 06:38
[Amps] AL811H metering, Bob Henderson, 01:18