Amps Mailing List (date)

January 31, 1999

[AMPS] 3-500Z filament voltage, Mark Brown, 23:49
[AMPS] Need Amplifier Manuals, Jon Ogden, 23:37
[AMPS] Fw: Final morse transmission, tacook, 23:06
[AMPS] 3-500Z filament voltage, km1h@juno.com, 22:12
[AMPS] 3-500Z filament voltage, KA2YKC@aol.com, 21:00
[AMPS] Solid State Amps, Yoshi, 20:52
[AMPS] Fw: Final morse transmission, Graham Jones, 19:25
[AMPS] Re: paralleling power diodes, Roy Koeppe, 18:16
[AMPS] More off subject about CW, Andy Wallace, 18:12
[AMPS] Parallel Diodes for increased current rating, tacook, 18:08
[AMPS] Henry 3K, Rich Measures, 18:02
[AMPS] Operating comments using the Emtron DX-2a, K3BU@aol.com, 17:43
[AMPS] 3-500Z filament voltage, Roy Koeppe, 17:38
[AMPS] HV Switching Supply, km1h@juno.com, 17:19
[AMPS] 3-500Z filament voltage, km1h@juno.com, 16:44
[AMPS] More off subject about CW, km1h@juno.com, 16:10
[AMPS] AM-912/TRC, km1h@juno.com, 15:58
[AMPS] Re: paralleling power diodes, km1h@juno.com, 15:00
[AMPS] 3-500Z filament voltage, Vic Rosenthal, 14:47
[AMPS] HV Switching Supply, Radio WC6W, 13:56
[AMPS] 3-500Z filament voltage, Rich Measures, 13:40
[AMPS] More off subject about CW, Andy Wallace, 13:29
[AMPS] AM-912/TRC, Radio WC6W, 13:07
[AMPS] Operating comments using the Emtron DX-2a, km1h@juno.com, 12:50
[AMPS] Operating comments using the Emtron DX-2a, km1h@juno.com, 12:48
[AMPS] Operating comments using the Emtron DX-2a, Jerry DiPietro, 12:32
[AMPS] More off subject about CW, km1h@juno.com, 12:14
[AMPS] Re: paralleling power diodes, Roy Koeppe, 12:14
[AMPS] grid termination value and triple bypass., km1h@juno.com, 12:05
[AMPS] Operating comments using the Emtron DX-2a, henry gillow-wiles, 11:56
[AMPS] Operating comments using the Emtron DX-2a, John Fielding, 11:48
[AMPS] 3-500Z filament voltage, km1h@juno.com, 11:31
[AMPS] Operating comments using the Emtron DX-2a, Andy Wallace, 11:14
[AMPS] Operating comments using the Emtron DX-2a, K1WPO@aol.com, 10:57
[AMPS] duplicate copies, Andy Wallace, 10:16
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Andy Wallace, 10:10
[AMPS] grid termination value and triple bypass., Andy Wallace, 10:02
[AMPS] 3-500Z filament voltage, <montytaylor@texoma.net (Monty Taylor), 09:13
[AMPS] 3-500Z filament voltage, <montytaylor@texoma.net (Monty Taylor), 08:59
[AMPS] Paralell Diodes for increased current rating, john merryman, 07:53
[AMPS] DC Rating of AC Resistors, john merryman, 07:53
[AMPS] (and CW Relevance), John Fielding, 02:30
[AMPS] 3CX800 in an SB-200, zeitler@ibm.net, 01:23

January 30, 1999

[AMPS] RE: Meter ?????, Arthur Moe, 23:50
[AMPS] duplicate copies, Phil T. (VE3OZZ), 23:23
[AMPS] duplicate copies of messages, Douglas Johnson, 23:02
[AMPS] duplicate copies of messages, Phil T. (VE3OZZ), 22:30
[AMPS] HV Switching Supply, km1h@juno.com, 21:04
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Vic Rosenthal, 21:02
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, km1h@juno.com, 20:57
[AMPS] ARRL and QST (and CW Relevance), km1h@juno.com, 20:36
[AMPS] grid termination value and triple bypass., km1h@juno.com, 20:31
[AMPS] RE: D.C. Rating of A.C. Rated Caps., Phil Clements, 20:19
[AMPS] Yaesu FL-2100 $225.00, zeitler@ibm.net, 20:15
[AMPS] (and CW Relevance), Andy Wallace, 20:01
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Andy Wallace, 19:58
[AMPS] ARRL and QST (and CW Relevance), km1h@juno.com, 19:57
[AMPS] ARRL and QST (and CW Relevance), km1h@juno.com, 19:55
[AMPS] ARRL and QST (and CW Relevance), km1h@juno.com, 19:45
[AMPS] D.C. Voltage Rating of A.C. Rated Capacitors, Phil Clements, 19:24
[AMPS] turns counters, km1h@juno.com, 19:08
[AMPS] B&W 850 in PI-L network, km1h@juno.com, 18:38
[AMPS] B&W 850 in PI-L network, km1h@juno.com, 18:30
[AMPS] 851/861 Triode, km1h@juno.com, 17:13
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, km1h@juno.com, 16:50
[AMPS] Re: Serious commentary from N4XY........................, km1h@juno.com, 16:42
[AMPS] (and CW Relevance), km1h@juno.com, 16:33
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, km1h@juno.com, 16:24
[AMPS] (and CW Relevance), km1h@juno.com, 16:22
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, km1h@juno.com, 16:00
[AMPS] grid termination resistor value?, km1h@juno.com, 15:44
[AMPS] ARRL and QST, km1h@juno.com, 15:37
[AMPS] 1.75" Diameter, 1 Amp meter needed, Jon Ogden, 15:30
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, km1h@juno.com, 15:29
[AMPS] ARRL and QST (and CW Relevance), Jon Ogden, 15:25
[AMPS] ARRL and QST (and CW Relevance), Jon Ogden, 15:20
[AMPS] turns counters, Ron Spencer, 14:35
[AMPS] ARRL and QST (and CW Relevance), frank ayers jr, 14:09
[AMPS] Need Amplifier Manuals, km1h@juno.com, 13:55
[AMPS] Aluminum sheet, km1h@juno.com, 13:37
[AMPS] Jennings variable for sale, <n2nep@cunliffegroup.com (John Cunliffe), 13:30
[AMPS] My ham radio history (the early days), km1h@juno.com, 13:28
[AMPS] grid termination value and triple bypass., Skip S Isaham, 13:28
[AMPS] ARRL and QST (and CW Relevance), Andy Wallace, 13:24
[AMPS] glue, km1h@juno.com, 13:06
[AMPS] ARRL and QST (and CW Relevance), Jon Ogden, 13:02
[AMPS] turns counters, Ron Spencer, 12:47
[AMPS] glue, km1h@juno.com, 11:20
[AMPS] Autek RF1 as Dip Meter, Bill Murphy, 09:56
[AMPS] Millen 45004 coilforms OD, Bill Murphy, 09:54
[AMPS] Solid State Amps, Andy Wallace, 09:36
[AMPS] ARRL and QST (and CW Relevance), Andy Wallace, 09:29
[AMPS] DE: K5PC, Paul Hellenberg K4JA, 08:37
[AMPS] ARRL and QST (and CW Relevance), docdc@ix.netcom.com, 01:10

January 29, 1999

[AMPS] ARRL and QST (and CW Relevance), Steven H. Sawyers n0yvy, 22:01
[AMPS] glue, Skip S Isaham, 21:20
[AMPS] Solid State Amps, Merv Schweigert, 20:58
[AMPS] ARRL and QST (and CW Relevance), Bill Turner, W7TI, 20:47
[AMPS] Thanks - Alpha 89 Parts, Gary G Dein, 20:34
[AMPS] ARRL and QST (and CW Relevance), Jon Ogden, 20:23
[AMPS] ARRL and QST (and CW Relevance), Bill Turner, W7TI, 20:02
[AMPS] B&W 850 in PI-L network, Roy Koeppe, 17:24
[AMPS] ARRL and QST (and CW Relevance), docdc@ix.netcom.com, 17:18
[AMPS] B&W 850 in PI-L network, William L. Fuqua III, 17:10
[AMPS] meter question, Joe Subich, W8IK/4, 14:31
[AMPS] INFO ABOUT PNL METERS, Bob Dodson WB5APD EM84ak, 11:33
[AMPS] Tube, Larry L. Ravlin, 11:01
[AMPS] 851/861 Triode, Phil T. (VE3OZZ), 09:56
[AMPS] Need Modutec Pnl Meters, Phil T. (VE3OZZ), 09:53
[AMPS] yaesu fl2100b mod, Erol, 09:50
[AMPS] meter question, Rich Measures, 08:45
[AMPS] Specs for 6166 tetrode needed, William L. Fuqua III, 07:59
[AMPS] meter question, Arthur Moe, 02:05
[AMPS] Russian tubage, tacook, 01:49

January 28, 1999

[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Jon Ogden, 23:57
[AMPS] Re: SERIOUS commentary from N4XY on "no-code", Paul Hicks, VE3BBH / VE3ZT, 22:54
[AMPS] 851/861 Triode, Arthur Moe, 22:26
[AMPS] 851/861 Triode, frank ayers jr, 21:51
[AMPS] 851/861 Triode, Steve Cook, 21:46
[AMPS] RE: Down Alpha 89, Bob Marston, 21:37
[AMPS] RE: Down Alpha 89, <stayler@powernet.net (Shawn Tayler), 21:08
[AMPS] ARRL and QST (and CW Relevance), Bill Turner, W7TI, 20:24
[AMPS] ARRL and QST (and CW Relevance), Michael Tope, 19:38
[AMPS] ARRL and QST (and CW Relevance), Bill Turner, W7TI, 19:18
[AMPS] ARRL and QST (and CW Relevance), Bill Turner, W7TI, 19:15
[AMPS] Need Modutec Pnl Meters, Steve, 17:38
[AMPS] specs on 6166 tetrode, William L. Fuqua III, 17:00
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Andy Wallace, 16:45
[AMPS] Need Modutec Pnl Meters, Bob Dodson WB5APD EM84ak, 16:43
[AMPS] ARRL and QST (and CW Relevance), William L. Fuqua III, 16:26
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Andy Wallace, 16:12
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Gilmer, Mike, 15:59
[AMPS] Need Amplifier Manuals, Jon Ogden, 15:50
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Jon Ogden, 15:45
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Jon Ogden, 15:43
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, James D. Duffer, 15:12
[AMPS] ARRL and QST (and CW Relevance), Alan Gray, 15:11
[AMPS] ARRL and QST (and CW Relevance), K3BU@aol.com, 15:03
[AMPS] ARRL and QST(and CW Relevance), John Fielding, 14:29
[AMPS] Need Amplifier Manuals, W6NQ, 14:12
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Andy Wallace, 13:44
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Paul Christensen, 13:36
[AMPS] Re: Serious commentary from N4XY........................, Michael Tope, 13:09
[AMPS] ARRL and QST (and CW Relevance), Andy Wallace, 13:08
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and"bounced" submission to [CW] from Bob Marston, K1TA [LONG] but pleaseread all, Andy Wallace, 13:05
[AMPS] ARRL and QST (and CW Relevance), Andy Wallace, 13:02
[AMPS] Re: SERIOUS commentary from N4XY on "no-code", Michael Tope, 13:00
[AMPS] ARRL and QST (and CW Relevance), Andy Wallace, 12:55
[AMPS] RE: Down Alpha 89, John Fielding, 12:04
[AMPS] ARRL and QST, John Fielding, 12:01
[AMPS] Re: SERIOUS commentary from N4XY on "no-code", Peter Chadwick, 11:17
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Rich Measures, 11:15
[AMPS] Re: SERIOUS commentary from N4XY on "no-code", Vic Rosenthal, 11:04
[AMPS] ARRL and QST (and CW Relevance), Peter Chadwick, 10:51
[AMPS] ARRL and QST (and CW Relevance), dan hearn, 10:36
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and"bounced" submission to [CW] from Bob Marston, K1TA [LONG] but pleaseread all, Bob Marston, 10:17
[AMPS] ARRL and QST (and CW Relevance), Tony Martin, 10:15
[AMPS] ARRL and QST (and CW Relevance), T A RUSSELL, 10:07
[AMPS] ARRL and QST (and CW Relevance), <stayler@powernet.net (Shawn Tayler), 09:48
[AMPS] ARRL and QST (and CW Relevance), Gilmer, Mike, 09:31
[AMPS] ARRL and QST(and CW Relevance), LEE ROGER WICAL, 08:57
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Peter Chadwick, 06:15
[AMPS] RE: Down Alpha 89, Peter Chadwick, 06:08
[AMPS] grid termination resistor value?, Peter Chadwick, 06:01
[AMPS] grid termination resistor value?, Rich Measures, 05:07
[AMPS] grid termination resistor value?, Rich Measures, 05:07
[AMPS] ARRL and QST, Peter Chadwick, 04:52
[AMPS] fl2100b mod, Erol, 04:26
[AMPS] grid termination resistor value?, Radio WC6W, 01:30
[AMPS] 851 triode, John Lyles, 01:15
[AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced"submission to [CW] from Bob Marston, K1TA [LONG] but please read all, Bob Marston, 00:39
[AMPS] epoxie, Ron Spencer, 00:09

January 27, 1999

[AMPS] CW, the ARRL and QST, Paul Hicks, VE3BBH / VE3ZT, 23:15
[AMPS] RE: Down Alpha 89, Gary G Dein, 23:07
[AMPS] grid termination resistor value?, zeitler@ibm.net, 22:47
[AMPS] grid termination resistor value?, Skip S Isaham, 22:32
[AMPS] ARRL and QST, Bill Turner, W7TI, 20:57
[AMPS] Aluminum sheet, W7CW Jay E Ostrem, 20:16
[AMPS] Down Alpha 89 - Assistance Sought, Gary G Dein, 20:02
[AMPS] Tks for Sigma amp info, Lynn D. Osterbur, 19:45
[AMPS] RE: [TowerTalk] hdbx or hbx? Or neither? (long, sorry), Joe Subich, W8IK/4, 19:16
[AMPS] Need Amplifier Manuals, NI4L, 18:08
[AMPS] My ham radio history (the early days), Kenneth D. Grimm, K4XL, 18:00
[AMPS] Need Amplifier Manuals, Jon Ogden, 17:52
[AMPS] ARRL and QST, Jon Ogden, 17:34
[AMPS] ARRL and QST, Andy Wallace, 17:33
[AMPS] ARRL and QST, Andy Wallace, 17:17
[AMPS] ARRL and QST, Andy Wallace, 17:05
[AMPS] Aluminum sheet, Strohm, Jim, 17:04
[AMPS] Aluminum sheet, John / NS1Z, 16:24
[AMPS] Russian tubage, George K. Watson, 16:19
[AMPS] Bandwidth, John Fielding, 15:39
[AMPS] My ham radio history (the early days), William L. Fuqua III, 15:33
[AMPS] glue, Bill Henderson, 13:55
[AMPS] Vacuum Cap needed, <stbriosc@tin.it (Stefano Brioschi), 13:32
[AMPS] glue, Gilmer, Mike, 13:30
[AMPS] ARRL and QST, Jim AH6OY, 12:16
[AMPS] ARRL and QST, Jim AH6OY, 12:15
[AMPS] ARRL and QST, William L. Fuqua III, 11:39
[AMPS] ARRL and QST, Larry L. Ravlin, 11:22
[AMPS] ARRL and QST, Arthur Moe, 11:22
[AMPS] ARRL and QST, Gilmer, Mike, 11:01
[AMPS] ARRL and QST, Jon Ogden, 10:57
[AMPS] ARRL and QST, Jon Ogden, 10:52
[AMPS] ARRL and QST, Andy Wallace, 10:44
[AMPS] ARRL and QST, Bob Marston, 10:41
[AMPS] glue, Jon Ogden, 10:39
[AMPS] ARRL and QST, John Brosnahan, 10:25
[AMPS] ARRL and QST, Andy Wallace, 10:12
[AMPS] ARRL and QST, James D. Duffer, 10:07
[AMPS] DC rateing of AC oil capacitors, William L. Fuqua III, 09:59
[AMPS] CW, the ARRL and QST, Andy Wallace, 09:28
[AMPS] ARRL and QST, K3BU@aol.com, 09:26
[AMPS] ARRL and QST, Andy Wallace, 09:17
[AMPS] ARRL & QST &CW, Ted & Joyce Wilhelm, 08:24
[AMPS] Is February QST out ?, yo3ctk@qsl.net, 08:11
[AMPS] ARRL and QST, T A RUSSELL, 07:37
[AMPS] ARRL and QST, Bill Turner, W7TI, 07:01
[AMPS] glue, Peter Chadwick, 06:28
[AMPS] glue, Bill Turner, W7TI, 06:23
[AMPS] glue, Peter Chadwick, 06:14
[AMPS] big or small amps, we're all hams, Rich Measures, 04:36
[AMPS] glue, km1h@juno.com, 03:27
[AMPS] ARRL, km1h@juno.com, 03:12
[AMPS] ARRL and QST, km1h@juno.com, 02:49
[AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!, km1h@juno.com, 02:39
[AMPS] Henry 3K, km1h@juno.com, 02:26
[AMPS] L4B power supply, km1h@juno.com, 02:14
[AMPS] big or small amps, we're all hams, km1h@juno.com, 02:03
[AMPS] big or small amps, we're all hams, km1h@juno.com, 01:52
[AMPS] ARRL and QST, Bob Marston, 01:47
[AMPS] L4B power supply, km1h@juno.com, 01:46
[AMPS] big or small amps, we're all hams, km1h@juno.com, 01:38
[AMPS] ARRL and QST, Jon Ogden, 00:42
[AMPS] ARRL and QST, Jon Ogden, 00:37
[AMPS] ARRL, Jon Ogden, 00:33
[AMPS] CW, the ARRL and QST, Jon Ogden, 00:30
[AMPS] ARRL and QST, Jim Reid, 00:29
[AMPS] CW, the ARRL and QST, Mark Brown, 00:28
[AMPS] ARRL and QST, Bob Marston, 00:18

January 26, 1999

[AMPS] ARRL and QST, Larry L. Ravlin, 23:54
[AMPS] ARRL, <jdc@ieway.com (Jim), 23:31
[AMPS] CW, the ARRL and QST, Jim Reid, 23:24
[AMPS] ARRL, Jon Ogden, 23:22
[AMPS] big or small amps, we're all hams, Jon Ogden, 23:13
[AMPS] Bandwidth, Jon Ogden, 23:10
[AMPS] ARRL and QST, Bob Marston, 23:09
[AMPS] glue, Jon Ogden, 23:04
[AMPS] How to slow down blower ?, Bob Dodson WB5APD EM84ak, 22:41
[AMPS] How to slow down blower ?, W/C Kornienko, 22:03
[AMPS] ARRL and QST, Larry L. Ravlin, 21:10
[AMPS] ARRL and QST, Larry L. Ravlin, 20:48
[AMPS] ARRL, Rich Measures, 20:43
[AMPS] ARRL, Alan Gray, 20:37
[AMPS] ARRL, <jdc@ieway.com (Jim), 20:29
[AMPS] ARRL, Rich Measures, 20:22
[AMPS] ARRL and QST, Andy Wallace, 19:03
[AMPS] ARRL, K3BU@aol.com, 19:03
[AMPS] ARRL and QST, Jim Reid, 18:21
[AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!, Theo Koning, 18:06
[AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!, Theo Koning, 17:59
[AMPS] Eimac Power Pentode., Radio WC6W, 17:51
[AMPS] Bandwidth, Phil T. (VE3OZZ), 17:23
[AMPS] ARRL, Gilmer, Mike, 15:53
[AMPS] Eimac Power Pentode., Eric, 14:58
[AMPS] big or small amps, we're all hams, Pete Smith, 14:56
[AMPS] Henry 3K, Larry L. Ravlin, 14:32
[AMPS] big or small amps, we're all hams, Rich Measures, 14:14
[AMPS] Triode conected Tetrodes, Rich Measures, 13:45
[AMPS] Bandwidth, Rich Measures, 13:45
[AMPS] L4B power supply, Rich Measures, 13:45
[AMPS] AIL-707 spares wanted, John Fielding, 13:30
[AMPS] AM transmiter, Ron Spencer, 13:17
[AMPS] big or small amps, we're all hams, John Fielding, 12:55
[AMPS] big or small amps, we're all hams, Peter Chadwick, 12:24
[AMPS] L4B power supply, Peter Chadwick, 12:15
[AMPS] big or small amps, we're all hams, Rich Measures, 12:13
[AMPS] L4B power supply, km1h@juno.com, 11:37
[AMPS] L4B power supply, Larry L. Ravlin, 10:49
[AMPS] big or small amps, we're all hams, Strohm, Jim, 09:42
[AMPS] L4B power supply, Will K6NDV, 09:31
[AMPS] Bandwidth, Peter Chadwick, 08:51
[AMPS] Triode conected Tetrodes, Peter Chadwick, 08:45
[AMPS] How to slow down blower ?, Peter Chadwick, 08:33
[AMPS] glue, Peter Chadwick, 08:29
[AMPS] more...Tube identification, Peter Chadwick, 06:11
[AMPS] glue, Rich Measures, 02:37
[AMPS] 8875 Max Voltage Question, km1h@juno.com, 02:22
[AMPS] Sigma amp? Value?, km1h@juno.com, 01:47
[AMPS] 8875 Max Voltage Question, Zdzislaw R Sawicki, 01:38

January 25, 1999

[AMPS] glue, Larry L. Ravlin, 23:13
[AMPS] big or small amps, we're all hams, Rich Measures, 21:47
[AMPS] Sigma amp? Value?, Lynn D. Osterbur, 21:21
[AMPS] How to slow down blower ?, rcook, 21:05
[AMPS] big or small amps, we're all hams, john merryman, 21:03
[AMPS] Triode conected Tetrodes, Rich Measures, 16:58
[AMPS] Triode conected Tetrodes, Rich Measures, 16:18
[AMPS] big or small amps, we're all hams, John Fielding, 15:53
[AMPS] big or small amps, we're all hams, John T. M. Lyles, 15:07
[AMPS] Triode conected Tetrodes, Roy Koeppe, 12:52
[AMPS] Triode conected Tetrodes, Radio WC6W, 12:39
[AMPS] coaxal relays, Ron Spencer, 01:53

January 24, 1999

[AMPS] Triode conected Tetrodes, Rich Measures, 20:19
[AMPS] Triode conected Tetrodes, km1h@juno.com, 18:45
[AMPS] Triode conected Tetrodes, Joe Subich, W8IK, 18:28
[AMPS] How to slow down blower ?, Rich Measures, 18:18
[AMPS] Triode conected Tetrodes, Rich Measures, 17:50
[AMPS] BIAS SUPPLY, Arthur Moe, 16:47
[AMPS] Triode conected Tetrodes, Arthur Moe, 16:46
[AMPS] ??? choke saturation, Arthur Moe, 16:43
[AMPS] Re: Ceramic Caps in PA Tanks, Roy Koeppe, 16:05
[AMPS] How to slow down blower ?, Johan Nordin, 15:47
[AMPS] Kaput 8877 swap for suppressor retrofit-kit, Rich Measures, 12:42
[AMPS] How to slow down blower ?, Rich Measures, 12:42
[AMPS] coaxal relays, km1h@juno.com, 12:36
[AMPS] Re: Ceramic Caps in PA Tanks, km1h@juno.com, 12:31
[AMPS] coaxal relays, Ron Spencer, 12:21
[AMPS] To Ten-Tec Inc, et al, Re: Titan II, Rich Measures, 11:53
[AMPS] coaxal relays, Rich Measures, 11:53
[AMPS] How to slow down blower ?, km1h@juno.com, 11:45
[AMPS] EF JOHNSON CAP VALUE, km1h@juno.com, 11:30
[AMPS] Re: Ceramic Caps in PA Tanks, dan hearn, 10:54
SV: [AMPS] 7/16 din, Harald Garberg Gule, 10:32
[AMPS] How to slow down blower ?, Bob Dodson WB5APD EM84ak, 10:29
[AMPS] Re: Alpha grid current vs power out, Roy Koeppe, 09:44
[AMPS] Re: Ceramic Caps in PA Tanks, Roy Koeppe, 09:34
[AMPS] EF JOHNSON CAP VALUE, Harald Garberg Gule, 07:20
[AMPS] 7/16 din, Ian White, G3SEK, 05:55
[AMPS] 7/16 din, igor rosky, 00:52
[AMPS] 7/16th DIN Connectors, km1h@juno.com, 00:31
[AMPS] 7/16th DIN connectors, Dave, 00:28

January 23, 1999

[AMPS] coaxal relays, km1h@juno.com, 23:47
[AMPS] 7/16th DIN Connectors, km1h@juno.com, 23:42
[AMPS] 7/16th DIN Connectors, Skip S Isaham, 22:37
[AMPS] My spelling in the last ad, zeitler@ibm.net, 22:00
[AMPS] Henry Roller Coil $15.00, zeitler@ibm.net, 21:42
[AMPS] 7/16th DIN Connectors, Ted & Joyce Wilhelm, 21:18
[AMPS] 7/16th DIN Connectors, igor rosky, 20:35
[AMPS] Homebrew resistors, igor rosky, 20:31
[AMPS] Alpha 77DX grid current, Mark S Graalman, 18:15
[AMPS] slow machine..., Skip S Isaham, 17:48
[AMPS] Re: Alpha grid current vs power out, Roy Koeppe, 17:34
[AMPS] To Ten-Tec Inc, et al, Re: Titan II, Roy Koeppe, 17:28
[AMPS] Alpha 77DX grid current, km1h@juno.com, 17:22
[AMPS] Alpha 77DX grid current, Paul Christensen, 17:03
[AMPS] Alpha 77DX grid current, dan hearn, 16:28
[AMPS] WTD:40-50A Switching Supply, dan hearn, 16:00
[AMPS] WTD:40-50A Switching Supply, RICHARD W SOLOMON, 12:26
[AMPS] am xmtr on 160 meters..., Skip S Isaham, 02:15

January 22, 1999

[AMPS] Circuit boards, David A. Pruett, 23:40
[AMPS] Jones connector needed, Randy Stegemeyer, 20:32
[AMPS] Dead Zone, frank ayers jr, 18:59
[AMPS] 4cx5000, Rich Measures, 18:38
[AMPS] Dead Zone, km1h@juno.com, 17:06
[AMPS] Svetlana Cyber Tour, marv gonsior, 16:05
[AMPS] 4cx5000, <n2nep@cunliffegroup.com (John Cunliffe), 15:36
[AMPS] Fw: Big tubes w/ handles, km1h@juno.com, 14:18
[AMPS] Turns counters, Ron Spencer, 14:01
[AMPS] 8877 idling current, km1h@juno.com, 13:53
[AMPS] 4cx5000, km1h@juno.com, 13:20
[AMPS] 4cx5000, km1h@juno.com, 13:15
[AMPS] Turns counters & am tx., Ron Spencer, 13:11
[AMPS] 4cx5000, km1h@juno.com, 12:51
[AMPS] Fw: Big tubes w/ handles, W6NQ, 12:29
[AMPS] 8877 idling current, john, 11:55
[AMPS] blower motor for 374-a Alpha, APIN0HF@aol.com, 11:39
[AMPS] hp amps, Larry L. Ravlin, 11:25
[AMPS] groth turns counters, Ron Spencer, 10:50
[AMPS] 4cx5000, Steve, 08:54
[AMPS] 4cx5000, John Cunliffe, 08:23
[AMPS] L4B, tacook, 07:50
[AMPS] 4cx5000, Bill Murphy, 07:48
[AMPS] Vac Variable Mounting, George T. Daughters, 04:16
[AMPS] 4cx5000, km1h@juno.com, 03:43
[AMPS] 4cx5000, Jon Ogden, 03:01
[AMPS] Vac Variable Mounting, Jon Ogden, 02:52
[AMPS] Vac Variable Mounting, km1h@juno.com, 02:36
[AMPS] blower motor for 374-a Alpha, tom hix, 01:12
[AMPS] 4cx5000, km1h@juno.com, 00:56
[AMPS] Mo' Big Amps, John Lyles, 00:40
[AMPS] induction furnace, Skip S Isaham, 00:04

January 21, 1999

[AMPS] Vac Variable Mounting, Rich Measures, 22:35
[AMPS] Photos of new RF power amplifier, John T. M. Lyles, 20:02
[AMPS] Vac Variable Mounting, Bill Coleman N2BC, 16:25
[AMPS] 4cx5000, Terry Gaiser, 14:17
[AMPS] 100KW induction furnace, Bill Henderson, 13:36
[AMPS] 4KW Linear Amplifier Power Supply Kit, Bill Cotter, 13:18
[AMPS] 4cx5000, Rich Measures, 11:52
[AMPS] 100KW induction furnace, John Fielding, 11:25
[AMPS] 4cx5000, Rich Measures, 10:31
[AMPS] 4cx5000, km1h@juno.com, 10:29
[AMPS] 4cx5000, Bill Murphy, 09:19

January 20, 1999

[AMPS] RE: UTC CG - 308, Steven M. Cutshall, 19:45
[AMPS] Adjusting fil voltage, Rich Measures, 18:11
[AMPS] 100KW induction furnace, Roy Koeppe, 16:24
[AMPS] Adjusting fil voltage, Roy Koeppe, 16:21
[AMPS] Adjusting fil voltage, Mark S Graalman, 16:12
[AMPS] Adjusting fil voltage, Radiodan W7RF, 16:02
[AMPS] 100KW induction furnace, Rich Measures, 15:57
[AMPS] Adjusting fil voltage, Rich Measures, 15:46
[AMPS] 100KW induction furnace, Kf8od@aol.com, 15:40
[AMPS] In-rush Protection, Roy Koeppe, 14:59
[AMPS] UTC CG-308 Plate Transformer, <jdc@ieway.com (Jim), 13:32
[AMPS] UTC CG-308 Plate Transformer, <jdc@ieway.com (Jim), 13:27
[AMPS] UTC CG-308 Plate Transformer, Steven M. Cutshall, 13:08
[AMPS] Circuit boards, km1h@juno.com, 11:04
[AMPS] Spinner knob., Roy Koeppe, 10:58
[AMPS] Circuit boards, Merv Schweigert, 09:29
[AMPS] Adjusting fil voltage, Ian White, G3SEK, 09:21
[AMPS] Adjusting fil voltage, pmarkham, 08:24
[AMPS] price for 3CX800, John Cunliffe, 06:15
[AMPS] Adjusting fil voltage, Rich Measures, 03:34
[AMPS] Spinner knob., Radiodan W7RF, 01:42
[AMPS] price for 3CX800, zeitler@ibm.net, 01:26

January 19, 1999

[AMPS] Adjusting fil voltage, Radiodan W7RF, 18:56
[AMPS] Adjusting fil voltage, Roy Koeppe, 14:25
[AMPS] groth turn counters, Ron Spencer, 13:33
[AMPS] EF Johnson Rotary Inductor for sale, be, 12:32
[AMPS] Transformer ID and info, Steve, 07:55
[AMPS] HTML on reflectors, Pete Smith, 06:02
[AMPS] "Commercial" HV connectors and cable, Dave, 02:04

January 18, 1999

[AMPS] groth turn counters, Rich Measures, 23:06
[AMPS] Re: Amps Digest V2 #11, John Lyles, 22:46
[AMPS] Need 4cx1600U info, Bob Dodson WB5APD EM84ak, 21:23
[AMPS] 4-1000 anode flange, <n2bc@ibm.net (Bill Coleman), 20:46
[AMPS] Tube info RS 1012L, Brian Kline, 20:09
[AMPS] High Voltage xfmrs, <jdc@ieway.com (Jim), 20:08
[AMPS] 1/4 wave stubs, zeitler@ibm.net, 16:16
[AMPS] amp manuals, NI4L, 16:11
[AMPS] RG-58: living dangerously?, Steve Thompson, 13:48
[AMPS] Re: RG-58: living dangerously?, Rich Measures, 12:28
[AMPS] RG-58: living dangerously?, Gilmer, Mike, 12:12
[AMPS] RG-58: living dangerously?, Gilmer, Mike, 11:57
[AMPS] RG-58: living dangerously?, zeitler@ibm.net, 11:39
[AMPS] HV Connectors, Steve, 11:34
[AMPS] HV Connectors, Rich Measures, 11:29
[AMPS] HV Connectors, km1h@juno.com, 10:37
[AMPS] FL2100B No Output, km1h@juno.com, 08:52
[AMPS] amp manuals, Smirk5766@aol.com, 08:22
[AMPS] HV Connectors, Ian White, G3SEK, 03:13

January 17, 1999

[AMPS] Tube info, Arne Gjerning, 22:01
[AMPS] documentation, Smirk5766@aol.com, 20:48
[AMPS] FL2100B No Output, DanAF9R@aol.com, 20:32
[AMPS] HV Connectors, Kenneth D. Grimm, K4XL, 20:13
[AMPS] Rohn Tower discounter in NE, km1h@juno.com, 18:35
[AMPS] HV Connectors, km1h@juno.com, 18:21
[AMPS] MHV & SHV Connector supplies., km1h@juno.com, 17:55
[AMPS] more...Tube identification, Skip S Isaham, 17:13
[AMPS] AL-82, Rich Measures, 16:32
[AMPS] HV Connectors, Ian White, G3SEK, 15:35
[AMPS] Motorhead... Tube identification, Skip S Isaham, 14:49
[AMPS] MHV & SHV Connector supplies., Skip S Isaham, 14:49
[AMPS] AL-82, Mike Michon, 13:35
[AMPS] AL-82, <stayler@powernet.net (Shawn Tayler), 13:20
[AMPS] AL-82, km1h@juno.com, 13:13
[AMPS] AL-82, Rich Measures, 12:44
[AMPS] AL-82, km1h@juno.com, 11:51
[AMPS] AL-82, Roy Koeppe, 09:40
[AMPS] AL-82, Roy Koeppe, 09:37
[AMPS] Guesstimating RF Component Specs, Rich Measures, 08:16
[AMPS] AL-82, Rich Measures, 08:16
[AMPS] AL-82, Mark S Graalman, 06:45
[AMPS] HV Connectors, Alek Petkovic, 06:06
[AMPS] SB-220 cover&case, DocMD, 03:05
[AMPS] need dead or dying SB-200, zeitler@ibm.net, 02:16
[AMPS] AL-82, Mike Michon, 01:44
[AMPS] HV Connectors, tacook, 01:11

January 16, 1999

[AMPS] AL-82, Mike Michon, 21:26
[AMPS] AL-82, km1h@juno.com, 20:05
[AMPS] Tube identification, km1h@juno.com, 17:25
[AMPS] Guesstimating RF Component Specs, Jon Ogden, 13:49
[AMPS] Tube identification, Jon Ogden, 13:43
[AMPS] Johnson Viking Invader PS for sale, Jon Ogden, 13:33
[AMPS] Guesstimating RF Component Specs, km1h@juno.com, 13:11
[AMPS] 8122 tubes for sale, km1h@juno.com, 12:31
[AMPS] HV Connectors, km1h@juno.com, 12:26
[AMPS] Guesstimating RF Component Specs, Carl Clawson, 11:47
[AMPS] Re: Alpha 76CA tube swap, km1h@juno.com, 10:44
[AMPS] HV Connectors, Mark Hall, 09:01
[AMPS] HV Connectors, Bill Turner, W7TI, 08:40
[AMPS] Want Dow Key or Transco Y relays, f117ab@ameritech.net, 07:25
[AMPS] HV Connectors, Ian White, G3SEK, 06:11
[AMPS] HV Connectors, Rich Measures, 03:17
[AMPS] 8122 tubes for sale, Arne Gjerning, 03:05
[AMPS] RF Switch Wanted, Arne Gjerning, 02:56
[AMPS] HV Connectors, Carl Clawson, 01:25
[AMPS] WTB: MLA2500 Amp, Zdzislaw R Sawicki, 00:27

January 15, 1999

[AMPS] Re: Alpha 76CA tube swap, pmarkham, 22:00
[AMPS] 8uF 4kvdc oil filled FS $25.00, zeitler@ibm.net, 21:58
[AMPS] Tube identification, K4SO@aol.com, 21:29
[AMPS] Need To Contact Tom Bruckner, Phil Clements, 19:14
[AMPS] FS: Tune and Load Variable Caps, km1h@juno.com, 18:31
[AMPS] FS: DTR-2000L Tank Circuit, km1h@juno.com, 17:38
[AMPS] Dentron 2000l, NI4L, 17:07
[AMPS] Re: Alpha 76CA tube swap, km1h@juno.com, 16:13
[AMPS] New Alpha amps, km1h@juno.com, 16:11
[AMPS] air varible cap, Ron Spencer, 13:54
[AMPS] value of plate tune cap in LK-500ZA, km1h@juno.com, 11:10
[AMPS] Are 8950's Good on 6m?, Skip S Isaham, 02:42
[AMPS] amplifier picture web site., Skip S Isaham, 02:42
[AMPS] value of plate tune cap in LK-500ZA, Rich Measures, 02:30
[AMPS] value of plate tune cap in LK-500ZA, zeitler@ibm.net, 02:04
[AMPS] air varible cap, km1h@juno.com, 00:31

January 14, 1999

[AMPS] tube anode cap, etc., Jon Ogden, 13:09
[AMPS] tube anode cap, etc., w3am@juno.com, 13:00
[AMPS] tube anode cap, etc., John Lyles, 12:13
[AMPS] HV Bypass Question, Jon Ogden, 10:58
[AMPS] HV Bypass Question, Rich Measures, 10:29
[AMPS] Re: Alpha 76CA tube swap, Rich Measures, 10:18
[AMPS] Re: Alpha 76CA tube swap, Terry Gaiser, 00:43
[AMPS] Re: Alpha 76CA tube swap, Kenneth D. Grimm, K4XL, 00:12
[AMPS] Looking for an SB-220 minus tubes, zeitler@ibm.net, 00:03

January 13, 1999

[AMPS] Re: Alpha 76CA tube swap, KA2YKC@aol.com, 23:36
[AMPS] 4-1000A plate caps, Dick McDuffie, 23:26
[AMPS] HV Bypass Question, Jon Ogden, 22:41
[AMPS] 8877 3 min Wait, Rich Measures, 21:51
[AMPS] Dentron Clipperton-V, f117ab@ameritech.net, 18:55
[AMPS] 8877 3 min Wait, K4ab@aol.com, 16:08
[AMPS] Are 8950's Good on 6m?, DavidC, 12:09
[AMPS] Switch for LK-500ZA, Greg Gobleman, 10:27
[AMPS] Test - IGNORE!, Jon Ogden, 09:55

January 12, 1999

[AMPS] PIN diodes, km1h@juno.com, 15:11
[AMPS] Radio Switch, W/C Kornienko, 12:39
[AMPS] 4CX1500B, John Fielding, 12:01
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, John Fielding, 11:53
[AMPS] 4CX1500B, Rich Measures, 10:05
[AMPS] HV CAPACITORS, <mike@g0mjw.freeserve.co.uk (M.J.Willis), 03:20
[AMPS] Radio Switch, Arne Gjerning, 01:41
[AMPS] SB-220 Meter Replacement, km1h@juno.com, 01:13
[AMPS] Info tubes CW-715B ??, km1h@juno.com, 01:02

January 11, 1999

[AMPS] SB-220 Meter Replacement, NI4L, 20:43
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, frank ayers jr, 20:39
[AMPS] Burle 8890 on 1296, Kf8od@aol.com, 20:24
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, Bill Turner, W7TI, 19:30
[AMPS] SB-220 Meter Replacement, Walter Fairclough, 18:55
[AMPS] 4CX1500B, Tarrant David, 18:25
[AMPS] RE: Wanted 3-1000Z, GÖTE NORDQVIST, 16:00
[AMPS] Info tubes CW-715B ??, lu7dw@abaconet.com.ar, 14:03
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, Paul Christensen, 12:36
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, km1h@juno.com, 12:09
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, Rich Measures, 11:03
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, dan hearn, 10:40
[AMPS] Tesla coil effects in open turns of coils, km1h@juno.com, 10:14
[AMPS] Wanted: 3-1000Z New or Used, Tom Quay - KT3TT, 07:49
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, Mark S Graalman, 05:32
[AMPS] TL-922 fuses, Rich Measures, 01:36
[AMPS] Tesla coil effects in open turns of coils, Rich Measures, 01:36

January 10, 1999

[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, Jon Ogden, 22:33
[AMPS] Viewstar PT-2500 for sale, <jdc@ieway.com (Jim), 22:26
[AMPS] Rapid Warmup Indirectly Heated Cathode Tubes, dan hearn, 21:58
[AMPS] TL-922 fuses, DavidC, 19:32
[AMPS] Wanted: 3-1000Z New or Used, Frank Donovan W3LPL, 19:15
[AMPS] Tesla coil effects in open turns of coils, John Lyles, 17:37
[AMPS] TL-922 fuses, Roger D. Johnson, 15:23
[AMPS] Henry 2KD-5 Plate Xmfr FS $75.00, zeitler@ibm.net, 10:36

January 09, 1999

[AMPS] Conversion of L-4B Amp to 3CX1200, Jeff Weinberg W8CQ, 20:43
[AMPS] Eimac FGQB3020, NI4L, 18:22
[AMPS] Eimac FGQB3020, K4SO@aol.com, 18:17
[AMPS] Jennings vacuum relays. . ., f117ab@ameritech.net, 16:58
[AMPS] Plate load charts, Rich Measures, 11:35
[AMPS] Plate load charts, km1h@juno.com, 10:44

January 08, 1999

[AMPS] Plate load charts, Rich Measures, 16:53
[AMPS] Plate load charts, km1h@juno.com, 11:05
[AMPS] Components, marv gonsior, 11:03
[AMPS] 28 amp 220 variac, <jdc@ieway.com (Jim), 09:50
[AMPS] E F Johnson Roller, Rich Measures, 05:54
[AMPS] E F Johnson Roller, Peter Chadwick, 04:53
[AMPS] Re: Henry Roller Coil, Rich Measures, 04:44
[AMPS] E F Johnson Roller, Rich Measures, 04:43
[AMPS] Plate load charts, Rich Measures, 04:43
[AMPS] Re: Henry Roller Coil, Rich Measures, 04:43
[AMPS] Henry Roller Coil, km1h@juno.com, 03:36
[AMPS] Henry Roller Coil, km1h@juno.com, 03:33
[AMPS] E F Johnson Roller, km1h@juno.com, 03:27
[AMPS] Plate load charts, km1h@juno.com, 02:35
[AMPS] E F Johnson Roller, Arne Gjerning, 00:41

January 07, 1999

[AMPS] Henry Roller Coil, Radio WC6W, 23:57
[AMPS] Henry Roller Coil, zeitler@ibm.net, 22:44
[AMPS] 28 amp 220 variac, <jdc@ieway.com (Jim), 21:08
[AMPS] Components, marv gonsior, 17:47
[AMPS] WTB: Alpha 91B, Hisa Iwasaki, 17:13
[AMPS] Plate load charts, Roger D. Johnson, 16:56
[AMPS] Re: Henry Roller Coil, Rich Measures, 15:16
[AMPS] Henry Roller Coil, zeitler@ibm.net, 14:12
Fw: [AMPS] Plate load charts, Rich Measures, 13:42
[AMPS] Plate load charts, Rich Measures, 13:18
[AMPS] arcing in tube?, km1h@juno.com, 12:07
Fw: [AMPS] Plate load charts, <jdc@ieway.com (Jim), 11:54
[AMPS] arcing in tube?, Peter Chadwick, 11:23
[AMPS] Plate load charts, Peter Chadwick, 11:19
[AMPS] arcing in tube?, km1h@juno.com, 11:15
[AMPS] Plate load charts, km1h@juno.com, 11:09
[AMPS] arcing in tube?, Rich Measures, 11:06
[AMPS] RJ1A coil, Merv Schweigert, 09:45
[AMPS] arcing in tube?, Dick McDuffie, 09:30
[AMPS] Plate load charts, T A RUSSELL, 07:38
[AMPS] Plate load charts, Rich Measures, 06:56
[AMPS] Need SB220 bandswitch, km1h@juno.com, 00:59
[AMPS] Fw: Fw: 3.2KV Plate Transformers, Two IDENTICAL Units Available, km1h@juno.com, 00:49

January 06, 1999

[AMPS] Need SB220 bandswitch, Lynn D. Osterbur, 22:56
[AMPS] Plate load charts, K3BU@aol.com, 12:50
[AMPS] Plate voltage, Rich Measures, 10:00
[AMPS] Plate voltage, Douglas Johnson, 06:31
[AMPS] ACOM 2000?, Andrew Chesnokov, 02:02
[AMPS] Plate load charts, John Fielding, 00:16

January 05, 1999

[AMPS] ACOM 2000?, <jdc@ieway.com (Jim), 23:36
[AMPS] Dollars per dB, zeitler@ibm.net, 14:11
[AMPS] Plate load charts, Ian White, G3SEK, 13:54
[AMPS] Plate load charts, km1h@juno.com, 12:04
[AMPS] Plate load charts, km1h@juno.com, 11:50
[AMPS] Plate load charts, Ian White, G3SEK, 10:25
[AMPS] Plate load charts, Rich Measures, 10:13
[AMPS] Plate load charts, Peter Chadwick, 08:41
[AMPS] Plate load charts, yo3ctk@qsl.net, 08:23
[AMPS] Plate load charts, Peter Chadwick, 08:06
[AMPS] Plate load charts, Rich Measures, 06:10
[AMPS] Plate load charts, Peter Chadwick, 05:53
[AMPS] Plate load charts, Rich Measures, 04:40
[AMPS] Plate load charts, <jdc@ieway.com (Jim), 02:08

January 04, 1999

[AMPS] Fw: Heath Cantenna oil - PCB's?, <jdc@ieway.com (Jim), 21:20
[AMPS] Fw: Heath Cantenna oil - PCB's?, Jim AH6OY, 20:36
[AMPS] Dollars per dB, frank ayers jr, 17:35
[AMPS] Point well taken, Kf8od@aol.com, 15:38
[AMPS] Dollars per dB, Rich Measures, 11:21
[AMPS] Mcmartin BA-10K transmitter, Rich Measures, 10:45
[AMPS] Dollars per dB, km1h@juno.com, 09:09
[AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB), km1h@juno.com, 08:53
[AMPS] Re: FS : 24-28VDC Supplies, km1h@juno.com, 08:10
[AMPS] Re: 75 ohm cable, Fraser Robertson, 06:15
[AMPS] Line input wiring, Peter Chadwick, 05:53
[AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB), Peter Chadwick, 05:52
[AMPS] Line input wiring, Peter Chadwick, 05:44
[AMPS] Mcmartin BA-10K transmitter, Jim AH6OY, 05:07
[AMPS] Dollars per dB, T A RUSSELL, 02:52

January 03, 1999

[AMPS] Dollars per dB, Jon Ogden, 20:45
[AMPS] Mcmartin BA-10K transmitter, Bill Coleman N2BC, 19:57
[AMPS] pa tubes, Larry L. Ravlin, 19:42
[AMPS] Tube dimension question, <jdc@ieway.com (Jim), 19:32
[AMPS] Mcmartin BA-10K transmitter, <jdc@ieway.com (Jim), 19:26
[AMPS] Mcmartin BA-10K transmitter, Kf8od@aol.com, 14:42
[AMPS] Dollars per dB, Radio WC6W, 13:31
[AMPS] Class E, Radio WC6W, 13:31
[AMPS] Capacitors 220 @ 450wv, robert witt, 13:23
[AMPS] FS : 24-28VDC Supplies, km1h@juno.com, 12:33
[AMPS] Tube dimension question, dan hearn, 10:54
[AMPS] Tube dimension question, frank ayers jr, 09:59
[AMPS] 208u10 for sale clean 10kw, john merryman, 00:26

January 02, 1999

[AMPS] FS; Lysco GDO, Phil T. (VE3OZZ), 22:48
[AMPS] Dollars per dB, Vic Rosenthal, 22:23
[AMPS] Dollars per dB, Doug Hall, 22:00
[AMPS] Dollars per dB, Rich Measures, 19:25
[AMPS] Dollars per dB, km1h@juno.com, 16:48
[AMPS] Half-wave Vertical Dipoles at WWVH, Jim Reid, 16:23
[AMPS] Henry in Italy, Radiodan W7RF, 16:16
[AMPS] FS; Lysco GDO, km1h@juno.com, 15:55
[AMPS] Dollars per dB, Jon Ogden, 15:22
[AMPS] FS: 6 Band amp input PC Boards., km1h@juno.com, 14:24
[AMPS] Henry in Italy, IK4ZIF, 12:58
[AMPS] TX Ant gain, etc., km1h@juno.com, 12:22
[AMPS] Icom 4KL, Andy Wallace, 11:26
[AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB), Michael Tope, 00:52
[AMPS] TX Ant/RX Ant Gain and Noise...again, Phil T. (VE3OZZ), 00:02

January 01, 1999

[AMPS] TX Ant/RX Ant Gain and Noise...again, Scott Townley, 21:04
[AMPS] palomar 90-a, NI4L, 20:41
[AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB), km1h@juno.com, 19:49
[AMPS] QRO vs Beams, cd, 18:29
[AMPS] Dollars per dB, km1h@juno.com, 17:24
[AMPS] Re: Dollars per dB, km1h@juno.com, 15:54
[AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB), Scott Townley, 15:52
[AMPS] Dollars per dB, Zdzislaw R Sawicki, 15:06
[AMPS] Dollars per dB, Rich Measures, 12:10
[AMPS] Dollars per dB, Pete Smith, 12:08
[AMPS] Re: Dollars per dB, DavidC, 11:28
[AMPS] Dollars per dB, T A RUSSELL, 11:19
[AMPS] Dollars per dB, km1h@juno.com, 09:07
[AMPS] Dollars per dB, John Fielding, 06:41
[AMPS] Smoking/Eating in the Multi Op Room!?, Ian White, G3SEK, 02:40