TenTec Mailing List (date)

TenTec Mailing List (date)

[Thread Index] [Top] [All Lists]

February 28, 2014

[TenTec] Is Corsair 9Mhz IF filter worth anything?, Jock Irvine, 21:39
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Tony Lelieveld, 21:36
Re: [TenTec] Equipment for DXPedtions-now vintage station for ARRL, Stuart Rohre, 19:41
Re: [TenTec] Equipment for DXPedtions-now vintage station for ARRL, Stuart Rohre, 19:37
Re: [TenTec] Equipment for DXPedtions, Jim Lowman, 19:31
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Jim Lowman, 18:57
Re: [TenTec] OMNI V Frequency Changes, Ed Purvis, 18:55
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Richards, 09:33
Re: [TenTec] In praise of older technology AM transmit with Ten Tecrigs, R. Eric Sluder - W9WLW, 07:59
Re: [TenTec] OMNI V Frequency Changes, Bob McGraw - K4TAX, 07:46
Re: [TenTec] Equipment for DXPedtions, Rick - DJ0IP / NJ0IP, 04:52
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 04:20
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Richards, 03:11
[TenTec] Equipment for DXPedtions, Jim Brown, 02:45
Re: [TenTec] still praising old technology, Rick - DJ0IP / NJ0IP, 02:23
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 02:10
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Richards, 01:40
[TenTec] OMNI V Frequency Changes, David and Dianne on Comcast, 00:07

February 27, 2014

Re: [TenTec] still praising old technology, John Farler, 21:54
Re: [TenTec] OMNI V Frequency Changes, Bob McGraw - K4TAX, 21:03
Re: [TenTec] Recording audio from Orion II, Richards, 20:47
Re: [TenTec] OMNI V Frequency Changes, KEN RINDFLEISCH, 20:27
[TenTec] OMNI V Frequency Changes, Scott Shepard, 20:13
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, John Huffman, 19:19
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 19:00
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 18:37
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 18:32
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 18:29
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Steve Berg, 18:01
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Barry N1EU, 17:44
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Richards, 16:56
Re: [TenTec] In praise of older technology AM transmit with Ten Tecrigs, Richards, 16:37
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Richards, 16:22
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Richards, 16:02
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Barry N1EU, 14:48
[TenTec] In praise of older technology AM transmit with, TenTec rigs (Really?), John Farler, 14:28
[TenTec] In praise of older technology AM transmit with TenTec rigs, John Farler, 14:12
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Ron Notarius W3WN, 14:08
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Jim Vohland, 13:58
Re: [TenTec] OMNI V Frequency Changes, Carl Moreschi, 13:50
[TenTec] OMNI V Frequency Changes, Ed Purvis, 13:29
Re: [TenTec] Recording audio from Orion II, Barry N1EU, 12:39
[TenTec] Recording audio from Orion II, jack, 11:54
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, R. Eric Sluder - W9WLW, 11:39
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Ed Purvis, 11:22
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Rick - DJ0IP / NJ0IP, 11:10
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Rick - DJ0IP / NJ0IP, 10:57
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, R. Eric Sluder-W9WLW, 10:33
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Ron Notarius W3WN, 10:13
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Ron Notarius W3WN, 10:10
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Bill NY9H, 09:30
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Carl Moreschi, 09:29
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 08:52
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Bob McGraw - K4TAX, 07:52
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Barry N1EU, 07:45
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Brian Carling, 07:32
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Brian Carling, 07:23
Re: [TenTec] In praise of older technology AM transmit with Ten Tecrigs, R. Eric Sluder-W9WLW, 06:42
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 06:40
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Richards, 06:31
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Richards, 06:17
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Richards, 06:09
Re: [TenTec] In praise of older technology AM transmit with Ten Tecrigs, Richards, 05:05
Re: [TenTec] In praise of older technology, Richards, 05:05
Re: [TenTec] In praise of older technology, Richards, 04:09
[TenTec] For Sale - Model 715, Richards, 00:39

February 26, 2014

Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Ron Notarius W3WN, 22:17
[TenTec] Sold: USB-64 Serial Cable Converter, Michael Bill, 20:41
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Bob McGraw - K4TAX, 19:46
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, R. Eric Sluder - W9WLW, 18:13
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 17:05
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Bob McGraw - K4TAX, 16:48
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Bob McGraw - K4TAX, 16:45
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 16:22
[TenTec] 962 PS for sale, d . e . warnick, 14:22
Re: [TenTec] Power Supply temperature, James C. Owen, III, 13:40
[TenTec] For Sale: TT USB - 64 Serial Converter Cable, Michael Bill, 13:22
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Barry N1EU, 12:46
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Rick - DJ0IP / NJ0IP, 12:37
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, GARY HUBER, 12:12
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Ron Notarius W3WN, 12:00
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Brian Carling, 11:51
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Barry N1EU, 11:49
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Brian Carling, 11:44
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Ron Notarius W3WN, 10:44
[TenTec] FOR SALE Orion 565AT, Newell , 10:43
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Carl Moreschi, 10:29
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Brian Carling, 10:22
Re: [TenTec] In praise of older technology AM transmitwithTenTecrigs, Bob McGraw - K4TAX, 10:04
Re: [TenTec] Test, Ralph, 07:28
Re: [TenTec] In praise of older technology AM transmitwith TenTecrigs, Rick - DJ0IP / NJ0IP, 06:17
Re: [TenTec] In praise of older technology AM transmitwith TenTecrigs, Barry N1EU, 05:35
[TenTec] for sale in Israel 544 (Triton IV Digital), geoffrey mendelson, 00:36

February 25, 2014

Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, bob barnes, 23:14
Re: [TenTec] In praise of older technology AM transmitwith TenTecrigs, Bob McGraw - K4TAX, 22:25
[TenTec] Test, Phil Coley, 22:23
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Brian Carling, 22:21
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, R. Eric Sluder-W9WLW, 21:00
Re: [TenTec] Good Mike Technique, Doug Reid, 17:50
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Scott Shepard, 17:34
Re: [TenTec] In praise of older technology AM transmit with Ten Tecrigs, Bob McGraw - K4TAX, 17:27
Re: [TenTec] Good Mike Technique, Jim Brown, 17:23
Re: [TenTec] Good Mike Technique, Jim Brown, 17:10
Re: [TenTec] Good Mike Technique, Bob McGraw - K4TAX, 17:03
Re: [TenTec] In praise of older technology AM transmit with TenTecrigs, Bob McGraw - K4TAX, 16:49
Re: [TenTec] Good Mike Technique, Jim Brown, 16:48
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, Tony, 16:27
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, bob barnes, 15:44
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, Barry N1EU, 15:38
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, k6jek, 15:08
Re: [TenTec] In praise of older technology AM transmit with TenTec rigs, GARY HUBER, 15:03
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, k6jek, 14:44
Re: [TenTec] Good Mike Technique, bob barnes, 14:40
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, R. Eric Sluder-W9WLW, 13:41
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, Mike Bryce, 13:40
[TenTec] Good Mike Technique, Bob McGraw - K4TAX, 13:29
Re: [TenTec] In praise of older technology, Doug Reid, 13:13
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, bob barnes, 13:12
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, bob barnes, 13:11
Re: [TenTec] In praise of older technology, bob barnes, 13:09
Re: [TenTec] In praise of older technology, bob barnes, 13:08
Re: [TenTec] In praise of older technology, bob barnes, 13:07
Re: [TenTec] In praise of older technology, bob barnes, 13:05
Re: [TenTec] In praise of older technology AM transmit with Ten Tec rigs, Mike Bryce, 13:05
Re: [TenTec] In praise of older technology, k6jek, 12:51
Re: [TenTec] In praise of older technology, Pete Ferrand, 11:51
Re: [TenTec] In praise of older technology, Brian Carling, 11:46
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 11:30
Re: [TenTec] In praise of older technology, bob barnes, 11:08
Re: [TenTec] In praise of older technology, bob barnes, 11:04
Re: [TenTec] In praise of older technology, Doug Reid, 09:51
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Bob McGraw - K4TAX, 09:20
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Doug Reid, 08:51
[TenTec] for sale in Israel 544 (Triton IV Digital), geoffrey mendelson, 01:57
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 01:21
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Jim Brown, 01:17
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 01:14

February 24, 2014

Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Bob McGraw - K4TAX, 21:28
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Bob McGraw - K4TAX, 21:21
Re: [TenTec] In praise of older technology, k6jek, 20:03
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Jim Brown, 20:02
Re: [TenTec] In praise of older technology, John Farler, 19:54
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, bcarling, 19:45
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Scott Shepard, 19:41
Re: [TenTec] In praise of older technology, John, 18:54
Re: [TenTec] In praise of older technology, Richards, 18:40
Re: [TenTec] In praise of older technology, Brian Carling, 18:14
Re: [TenTec] Triton lV, bob barnes, 18:13
Re: [TenTec] In praise of older technology, k6jek, 18:03
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Carter, 17:58
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Bob McGraw - K4TAX, 17:56
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Mike Hyder -N4NT-, 17:50
Re: [TenTec] Does this happen to you on transmit...OMNI V ??, Carl Moreschi, 17:34
[TenTec] Does this happen to you on transmit...OMNI V ??, Scott Shepard, 17:29
Re: [TenTec] In praise of older technology, k6jek, 16:08
Re: [TenTec] Triton lV, Mike Hyder -N4NT-, 15:53
Re: [TenTec] In praise of older technology, Ron Notarius W3WN, 15:42
Re: [TenTec] In praise of older technology, Doug Reid, 15:40
Re: [TenTec] In praise of older technology, Bob McGraw - K4TAX, 15:35
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 15:27
Re: [TenTec] In praise of older technology, k6jek, 15:24
Re: [TenTec] In praise of older technology, Darrell Bellerive, 14:39
Re: [TenTec] In praise of older technology, Doug Reid, 13:30
Re: [TenTec] In praise of older technology, Tony Lelieveld, 13:07
Re: [TenTec] In praise of older technology, Brian Carling, 12:50
Re: [TenTec] In praise of older technology, R. Eric Sluder-W9WLW, 12:13
Re: [TenTec] In praise of older technology, R. Eric Sluder-W9WLW, 12:04
Re: [TenTec] In praise of older technology, R. Eric Sluder-W9WLW, 10:53
Re: [TenTec] In praise of older technology, Phil Sussman, 10:41
Re: [TenTec] In praise of older technology, John, 10:41
Re: [TenTec] In praise of older technology, K3GHH, 10:38
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 10:28
Re: [TenTec] In praise of older technology, Doug Reid, 09:07
Re: [TenTec] In praise of older technology, Richards, 03:31

February 23, 2014

Re: [TenTec] In praise of older technology, k6jek, 22:44
Re: [TenTec] In praise of older technology, Ed Purvis, 19:58
Re: [TenTec] In praise of older technology, Carter, 18:05
Re: [TenTec] In praise of older technology, Winston Jones, 16:03
Re: [TenTec] In praise of older technology, k6jek, 15:44
Re: [TenTec] In praise of older technology, Phil Sussman, 15:43
Re: [TenTec] In praise of older technology, Carter, 15:11
Re: [TenTec] In praise of older technology, k6jek, 14:06
Re: [TenTec] In praise of older technology, Mike Bryce, 12:36
Re: [TenTec] In praise of older technology, John, 10:03
Re: [TenTec] In praise of older technology, Bob McGraw - K4TAX, 08:06
Re: [TenTec] In praise of older technology, Richards, 03:48
Re: [TenTec] In praise of older technology, k6jek, 03:30
Re: [TenTec] In praise of older technology, Rick - DJ0IP / NJ0IP, 02:46
Re: [TenTec] In praise of older technology, Richards, 00:42

February 22, 2014

Re: [TenTec] In praise of older technology, Steve Berg, 23:37
Re: [TenTec] In praise of older technology, Bob McGraw - K4TAX, 23:26
Re: [TenTec] In praise of older technology, k6jek, 22:12
Re: [TenTec] In praise of older technology, Carl Moreschi, 21:14
Re: [TenTec] In praise of older technology, Brian Carling, 21:07
Re: [TenTec] In praise of older technology, K3GHH, 21:04
Re: [TenTec] In praise of older technology, Brian Carling, 21:03
Re: [TenTec] In praise of older technology, Scott Shepard, 20:47
Re: [TenTec] In praise of older technology, Ed Purvis, 20:29
Re: [TenTec] In praise of older technology, Jim Lowman, 20:26
Re: [TenTec] In praise of older technology, Steve Berg, 20:12
Re: [TenTec] In praise of older technology, k6jek, 20:03
[TenTec] Orion I, Newell , 19:51
Re: [TenTec] In praise of older technology, Jerry Haigwood, 19:29
Re: [TenTec] In praise of older technology, GARY HUBER, 19:16
Re: [TenTec] In praise of older technology, Mike Bryce, 19:14
Re: [TenTec] In praise of older technology, bob barnes, 19:08
Re: [TenTec] In praise of older technology, k6jek, 19:03
Re: [TenTec] In praise of older technology, Ed Purvis, 18:48
Re: [TenTec] In praise of older technology, bob barnes, 18:47
Re: [TenTec] In praise of older technology, Brian Carling, 18:14
Re: [TenTec] In praise of older technology, Brian Carling, 18:03
Re: [TenTec] In praise of older technology, k6jek, 18:01
Re: [TenTec] In praise of older technology, Ken Brown, 17:44
Re: [TenTec] In praise of older technology, Mike Bryce, 16:15
[TenTec] In praise of older technology, Scott Shepard, 14:55
[TenTec] Triton lV, smileywb4, 14:04
Re: [TenTec] Wanted: 961 Power Supply, Non-Working, Steve MIller, 13:03
[TenTec] Wanted: 961 Power Supply, Non-Working, Ed Purvis, 12:58

February 21, 2014

[TenTec] Salutations Tentec, alanzaur, 12:28

February 20, 2014

Re: [TenTec] Power Supply temperature, Brian Carling, 16:47
Re: [TenTec] Power Supply temperature, Clayton Brantley, 16:38

February 19, 2014

Re: [TenTec] Corsair II UV EPROM failure, Mike Bryce, 22:40
Re: [TenTec] Corsair II UV EPROM failure, A R, 21:29
Re: [TenTec] Corsair II UV EPROM failure, Stuart Rohre, 19:39
Re: [TenTec] Corsair II UV EPROM failure, Mike Bryce, 18:03
Re: [TenTec] Corsair II UV EPROM failure, Steve Berg, 17:31
Re: [TenTec] Corsair II UV EPROM failure, A R, 15:50
Re: [TenTec] Looking for an, Omni C, Paragon II or Corsair II, Ralph, 13:00
Re: [TenTec] Ten Tec 1252 Energy Amplifier?, N0CZV, 12:53
[TenTec] Looking for an, Omni C, Paragon II or Corsair II, Stan Kurmas, 12:49
Re: [TenTec] Ten Tec 1252 Energy Amplifier?, N0CZV, 11:37
Re: [TenTec] Ten Tec 1252 Energy Amplifier?, Mike Bryce, 10:28
[TenTec] Ten Tec 1252 Energy Amplifier?, Steve Garwood, 02:56

February 18, 2014

Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Bob McGraw - K4TAX, 23:01
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, GARY HUBER, 22:09
Re: [TenTec] Power Supply temperature, Bob McGraw - K4TAX, 22:00
Re: [TenTec] Power Supply temperature, Dave Edwards, 21:42
Re: [TenTec] Power Supply temperature, Bry Carling, 21:20
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Bry Carling, 21:12
[TenTec] FS Tentec Titan 425, Jerry Mullinix, 20:32
Re: [TenTec] Power Supply temperature, Clayton Brantley, 20:28
Re: [TenTec] Power Supply temperature, Nathan Moreschi, 19:51
Re: [TenTec] Power Supply temperature, Brian Carling, 18:04
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, 73@73.am, 18:04
Re: [TenTec] Power Supply temperature, Dave Edwards, 17:57
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Joe W2KJ, 17:52
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, 73@73.am, 17:46
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Bob McGraw - K4TAX, 17:45
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Joe W2KJ, 17:35
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Rick - DJ0IP / NJ0IP, 16:53
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Steve Berg, 16:48
Re: [TenTec] Power Supply temperature, Brian Carling, 16:21
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, Brian Carling, 16:20
Re: [TenTec] Power Supply temperature, Dave Edwards, 16:16
Re: [TenTec] F.S. New Ten Tec 715 RF Processor, José Félix Ballester, 16:14
Re: [TenTec] Power Supply temperature, Brian Carling, 16:12
[TenTec] F.S. New Ten Tec 715 RF Processor, Joe W2KJ, 16:06
Re: [TenTec] Power Supply temperature, Dave Edwards, 15:34
Re: [TenTec] Power Supply temperature, Rick - DJ0IP / NJ0IP, 15:31
[TenTec] Power Supply temperature, Bry Carling, 13:27

February 17, 2014

Re: [TenTec] Corsair II Double Side Band Board (BFO) Problem, Scott Shepard, 20:20
Re: [TenTec] Corsair II. DSB generator alignment???manual issues, Scott Shepard, 11:31
Re: [TenTec] Corsair II. DSB generator alignment???manual issues, Barry N1EU, 10:28
[TenTec] Corsair II. DSB generator alignment???manual issues, Scott Shepard, 10:16

February 16, 2014

Re: [TenTec] corsair 2 eprom, A R, 22:35
[TenTec] corsair 2 eprom, k5gak@powerc.net, 21:38
[TenTec] Tentec Argonauts, jliving39, 18:04
[TenTec] Eagle VFO Knob Friction or Dragging, Bob McGraw - K4TAX, 17:50
Re: [TenTec] Argonauts, Richards, 11:36
Re: [TenTec] Argonauts, Karl Schwab, 10:39
Re: [TenTec] Argonauts, Richards, 01:11
[TenTec] FOR SALE: Tentec Model 243 VFO, Neil Martinsen-Burrell, 00:07

February 15, 2014

Re: [TenTec] Corsair II UV EPROM failure, geoffrey mendelson, 23:23
Re: [TenTec] Corsair II UV EPROM failure, A R, 22:33
Re: [TenTec] Argonauts, Paul Gates, 19:44
Re: [TenTec] Corsair II UV EPROM failure, Richards, 18:44
[TenTec] Fw: Corsair II UV EPROM failure, Jerry Haigwood, 17:23
[TenTec] Argonauts, Roger C. Rose, 17:03
Re: [TenTec] Corsair II UV EPROM failure, Jerry Haigwood, 16:57
Re: [TenTec] Corsair II UV EPROM failure, Mike Bryce, 16:53
Re: [TenTec] Corsair II UV EPROM failure, Jerry Haigwood, 16:13
Re: [TenTec] Corsair II UV EPROM failure, Mike Bryce, 12:11
Re: [TenTec] Corsair II UV EPROM failure, Steve Hunt, 11:57
Re: [TenTec] Corsair II UV EPROM failure, Mike Bryce, 11:47
Re: [TenTec] Corsair II UV EPROM failure, Ralph, 11:28
Re: [TenTec] Corsair II UV EPROM failure, A R, 11:24
Re: [TenTec] Corsair II UV EPROM failure, Steve Hunt, 08:26
Re: [TenTec] Corsair II UV EPROM failure, Ralph, 08:04
Re: [TenTec] Corsair II UV EPROM failure, Steve Hunt, 05:36
Re: [TenTec] Corsair II UV EPROM failure, A R, 05:16
Re: [TenTec] Corsair II UV EPROM failure, Steve Hunt, 04:31
Re: [TenTec] Corsair II UV EPROM failure, geoffrey mendelson, 02:03
Re: [TenTec] Corsair II UV EPROM failure, A R, 00:41

February 14, 2014

Re: [TenTec] Corsair II UV EPROM failure, A R, 21:35
[TenTec] (no subject), Scott Shepard, 20:44
Re: [TenTec] Corsair II UV EPROM failure, Jerry Haigwood, 20:24
Re: [TenTec] Corsair II UV EPROM failure, A R, 20:13
Re: [TenTec] Corsair II UV EPROM failure, Clayton Brantley, 19:56
[TenTec] Corsair II UV EPROM failure, A R, 19:43
Re: [TenTec] Making the corsair II a little more quiet, Barry N1EU, 18:42
Re: [TenTec] Making the corsair II a little more quiet, Barry N1EU, 18:32
[TenTec] Making the corsair II a little more quiet, Scott Shepard, 18:23
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Bob McGraw - K4TAX, 08:05
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Kris Merschrod, 07:14
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Rick - DJ0IP / NJ0IP, 02:36

February 13, 2014

Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Jim Brown, 23:29
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Brian Carling, 23:13
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Bob McGraw - K4TAX, 21:44
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, w8au, 21:05
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Mike Bryce, 21:02
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, w8au, 20:45
Re: [TenTec] Anyone using LP-PAN with Orion/RX366?, Rick W, 18:02
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Brian Carling, 17:29
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Mike Bryce, 17:17
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Jim Brown, 17:07
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Bob McGraw - K4TAX, 15:13
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Kris Merschrod, 14:49
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, Mike Bryce, 14:20
Re: [TenTec] Ten Tec Centaur 411 10m Mod Needed, w8au, 13:39
Re: [TenTec] Anyone using LP-PAN with Orion/RX366?, John Huffman, 13:06
Re: [TenTec] TenTec Argonaut 509, Doug Reid, 12:59
[TenTec] Ten Tec Centaur 411 10m Mod Needed, Doug Ellmore Sr., 12:44
[TenTec] TenTec Argonaut 509, jliving39, 12:44
Re: [TenTec] Anyone using LP-PAN with Orion/RX366?, Barry N1EU, 12:39
[TenTec] Anyone using LP-PAN with Orion/RX366?, Floyd Sense, 12:34
[TenTec] Omni C parts, Paul DeWitte, 12:30
[TenTec] Anyone using LP-PAN with Orion/RX366?, Barry N1EU, 05:01

February 12, 2014

[TenTec] for sale jupiter, Mike Herman, 17:14
Re: [TenTec] Argonaut 505, Rick - DJ0IP / NJ0IP, 16:30
Re: [TenTec] Argonaut 505, Carl Moreschi, 16:23
Re: [TenTec] Argonaut 505, geoffrey mendelson, 16:15
[TenTec] Argonaut 505, JAMES HANLON, 13:51
Re: [TenTec] NOISE - WAS: Troubleshooting Argonaut 505 with low output, Richards, 00:33

February 11, 2014

Re: [TenTec] JT65 and JT9, Richards, 21:03
[TenTec] NOISE - WAS: Troubleshooting Argonaut 505 with low output, Bry Carling, 16:22
Re: [TenTec] JT65 and JT9, Bill Engel K5DHY, 14:05
[TenTec] JT65 and JT9, John T. Fleming, 10:21

February 09, 2014

Re: [TenTec] Troubleshooting Argonaut 505 with low output, Bry Carling, 22:48
[TenTec] original jupiter, Mike Herman, 13:56
[TenTec] 238 Tuner, sale or trade, Ed Purvis, 12:20

February 08, 2014

[TenTec] Value of a 526/"6N2?", Jim Lowman, 21:46
[TenTec] FS: Omni 6 opt 3, Barry N1EU, 14:40
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Richards, 12:38
Re: [TenTec] Adding Pilot Light to RX-320D, Mike Bryce, 07:32
Re: [TenTec] Adding Pilot Light to RX-320D, Phil Sussman, 06:52
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Rick - DJ0IP / NJ0IP, 02:15

February 07, 2014

Re: [TenTec] Troubleshooting Argonaut 505 with low output, Bob McGraw - K4TAX, 22:50
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Neil Martinsen-Burrell, 18:17
Re: [TenTec] Reasonable Price for Paragon II with PS, Richards, 17:42
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Bry Carling, 17:25
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Richards, 17:13
Re: [TenTec] Reasonable Price for Paragon II with PS, Woody Demitz, 15:27
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Clayton Brantley, 15:17
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Steve Mercure, 12:18
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Bob McGraw - K4TAX, 12:06
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Carter, 09:03

February 06, 2014

[TenTec] OT: Looking for a P3 Panadapter, Gary Smith, 16:55
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Barry N1EU, 14:02
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Bob McGraw - K4TAX, 13:53
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Mike Bryce, 13:41
Re: [TenTec] Centurion Amp QSK Board, Donald, K6RV, 13:09
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Barry N1EU, 12:41
Re: [TenTec] "Reasonable Price for Paragon II with PS?, Mike Bryce, 12:16
[TenTec] "Reasonable Price for Paragon II with PS?, Woody Demitz, 10:22
Re: [TenTec] Eagle AM filter requirement, Bob McGraw - K4TAX, 08:48
Re: [TenTec] Eagle AM filter requirement, Barry N1EU, 05:35

February 05, 2014

Re: [TenTec] Eagle AM filter requirement, Bob McGraw - K4TAX, 19:49
[TenTec] Eagle AM filter requirement, Mike Manship, 19:41
Re: [TenTec] Corsair noise blanker and frequency display, Gary Smith, 17:37
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Rick - DJ0IP / NJ0IP, 11:49
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Neil Martinsen-Burrell, 09:56
Re: [TenTec] Troubleshooting Argonaut 505 with low output, Steve Mercure, 09:48
[TenTec] Troubleshooting Argonaut 505 with low output, Neil Martinsen-Burrell, 09:25

February 04, 2014

Re: [TenTec] About possible TenTec Newsletter, JOHN, 18:39
Re: [TenTec] MMRTTY+ Omni 6 question, Jim Brown, 18:38
Re: [TenTec] Corsair noise blanker and frequency display, A R, 15:48
Re: [TenTec] MMRTTY+ Omni 6 question, Carter, 15:28
Re: [TenTec] MMRTTY+ Omni 6 question, Jim Brown, 14:35
Re: [TenTec] Omni VII firmware, Bob McGraw - K4TAX, 14:03
[TenTec] MMRTTY+ Omni 6 question, Carter, 13:04
[TenTec] Omni VII firmware, Paul DeWitte, 12:36
Re: [TenTec] Centurion Amp. Problem, Bry Carling, 09:20
Re: [TenTec] Centurion Amp. Problem, Bry Carling, 09:18
[TenTec] About possible TenTec Newsletter, John Henry, 09:12
Re: [TenTec] About possible TenTec Newsletter, Rick - DJ0IP / NJ0IP, 03:04
[TenTec] Fw: TEN-TEC Newsletter, Bob McGraw - K4TAX, 00:35
Re: [TenTec] Centurion Amp. Problem, Donald, K6RV, 00:18
[TenTec] About possible TenTec Newsletter, Richards, 00:09

February 03, 2014

Re: [TenTec] corsair display, A R, 23:16
Re: [TenTec] Corsair noise blanker and frequency display, A R, 23:06
Re: [TenTec] Corsair noise blanker and frequency display, A R, 22:55
Re: [TenTec] TT 422 Blowing Fuses, Jim Brown, 22:25
Re: [TenTec] Apology to Bry concerning the Centurion Blowing Fuses., Bry Carling, 22:12
[TenTec] Apology to Bry concerning the Centurion Blowing Fuses., Robb Urie, 21:41
[TenTec] corsair display, k5gak@powerc.net, 20:52
Re: [TenTec] Corsair noise blanker and frequency display, Gary Smith, 20:42
Re: [TenTec] Corsair noise blanker and frequency display, A R, 19:48
Re: [TenTec] Corsair noise blanker and frequency display, Wade Staggs, 19:29
Re: [TenTec] Corsair noise blanker and frequency display, Rick - DJ0IP / NJ0IP, 17:15
Re: [TenTec] Corsair noise blanker and frequency display, Rick - DJ0IP / NJ0IP, 17:11
Re: [TenTec] Corsair noise blanker and frequency display, Barry N1EU, 17:00
Re: [TenTec] Corsair noise blanker and frequency display, Barry N1EU, 16:51
Re: [TenTec] Corsair noise blanker and frequency display, Rick - DJ0IP / NJ0IP, 16:29
Re: [TenTec] Corsair noise blanker and frequency display, A R, 14:00
Re: [TenTec] Corsair noise blanker and frequency display, A R, 13:42
Re: [TenTec] Corsair noise blanker and frequency display, Bob McGraw - K4TAX, 13:24
Re: [TenTec] Corsair noise blanker and frequency display, k6jek, 13:14
Re: [TenTec] Corsair noise blanker and frequency display, Barry N1EU, 12:29
[TenTec] Corsair noise blanker and frequency display, A R, 12:13
Re: [TenTec] TenTec Corsair II, Jim Hicks, 02:36

February 02, 2014

Re: [TenTec] TT 422 Blowing Fuses, Bob McGraw - K4TAX, 23:05
Re: [TenTec] TT 422 Blowing Fuses, Bry Carling, 22:32
Re: [TenTec] centurion, Rodney, 22:04
Re: [TenTec] centurion, Bry Carling, 22:00
Re: [TenTec] Care and Feeding of Centurions, Bry Carling, 21:55
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 21:48
[TenTec] centurion, Rodney, 21:43
Re: [TenTec] Care and Feeding of Centurions, Bry Carling, 21:37
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 21:34
Re: [TenTec] TT 422 Blowing Fuses, Bob McGraw - K4TAX, 21:17
Re: [TenTec] TT 422 Blowing Fuses, Bry Carling, 21:15
Re: [TenTec] 422 Centurion blowing fuses..., Bob McGraw - K4TAX, 21:14
Re: [TenTec] TT 422 Blowing Fuses, Bry Carling, 21:03
[TenTec] TT 422 Blowing Fuses, Robb Urie, 20:28
Re: [TenTec] Care and Feeding of Centurions, Richards, 18:53
Re: [TenTec] 422 Centurion blowing fuses..., bcarling, 18:30
Re: [TenTec] 422 Centurion blowing fuses..., Jim Brown, 17:37
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 17:35
Re: [TenTec] Care and Feeding of Centurions, Bry Carling, 17:15
Re: [TenTec] Care and Feeding of Centurions, Bry Carling, 17:10
Re: [TenTec] 422 Centurion blowing fuses..., Bry Carling, 17:06
Re: [TenTec] 422 Centurion blowing fuses..., Bry Carling, 17:03
Re: [TenTec] 422 Centurion blowing fuses..., Bry Carling, 17:01
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 16:55
[TenTec] Looking for Inrad 2.8KHz filter for 6.3MHz i.f., Barry N1EU, 16:14
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 16:05
Re: [TenTec] Care and Feeding of Centurions, Mike Pagel, K9UW, 15:50
Re: [TenTec] Care and Feeding of Centurions, Jim Brown, 15:31
Re: [TenTec] Care and Feeding of Centurions, Bob McGraw - K4TAX, 14:58
[TenTec] Care and Feeding of Centurions, Richards, 14:26
Re: [TenTec] 422 Centurion blowing fuses..., Jim Brown, 14:02
Re: [TenTec] 422 Centurion blowing fuses..., Bob McGraw - K4TAX, 13:48
Re: [TenTec] 422 Centurion blowing fuses..., Jim Brown, 13:44
Re: [TenTec] 422 Centurion blowing fuses..., Bry Carling, 13:33
Re: [TenTec] 422 Centurion blowing fuses..., Bob McGraw - K4TAX, 13:07
[TenTec] 422 Centurion blowing fuses..., Spencer, 13:03

February 01, 2014

Re: [TenTec] TenTec Corsair II, Richards, 14:49
[TenTec] FS TT 238A ant tuner and pair of 35M astron power supplies want Astron VS-50M manual, denton sprague, 12:33
Re: [TenTec] 422 Centurion blowing fuses..., Bob McGraw - K4TAX, 12:09
Re: [TenTec] Omni D a gc popping, Barry N1EU, 06:39
[TenTec] TenTec Corsair II, Adrian Rees (MW1LCR), 05:43
Re: [TenTec] 422 Centurion blowing fuses..., Ken Brown, 00:32
Re: [TenTec] Omni D a gc popping, Rick - DJ0IP / NJ0IP, 00:05