A TenTec 705 microphone into the OMNI-VII with the TX ROLL OFF set to 150 Hz
and TX BW set to 3400 and TX EQ 0 dB driving a Titan to 300 W (on peaks) is
said, on the local 160 AM net, to sound just exactly like I do face to face.
The transmitted pattern as seen on a FLEX-1500 in panadapter mode shows
about a 18 dB roll off between 300 Hz and 3300 Hz not at all unlike the
pattern of a commercial AM station.
73 ES DX,
Gary -- AB9M
-----Original Message-----
From: R. Eric Sluder-W9WLW
Sent: Tuesday, February 25, 2014 12:41 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] In praise of older technology AM transmit with TenTec
rigs
I'm told that I sound acceptable for a non-boatachor using the Omni VII. I
believe the audio is adjustable on the O7 using the AM mode, but I haven't
tried real hard to improve my audio any. Since we're on the topic, I'll
give the Eagle credit where credit is due. I'm always complimented on how
well I sound using the Eagle. I use the same mic for both rigs (TT 709).
I check into an AM net on Friday evenings and us an AL-80a for extra kick,
and some of the fellas are hard pressed to believe I'm using a modern rig.
:-) The others usually talk about it later when the frequency switches back
over to SSB. You hear them talking about how well the Eagle sounds and you
can tell they're mulling over looking into getting one.
- R. Eric Sluder
W9WLW
________________________________
From: Mike Bryce <prosolar@sssnet.com>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Tuesday, February 25, 2014 1:04 PM
Subject: Re: [TenTec] In praise of older technology AM transmit with Ten
Tec rigs
I’ve used my Omni VII on AM on 7.290 and they say it sounds great. It does
lack the punch of the heavy iron guys,
I run a Centaur amplifier for some added kick, sometimes 40 meters and AM
don’t play well together.
Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o
A man with one clock knows what time it is. A man with two clocks is never
sure.
On Feb 25, 2014, at 12:50 PM, k6jek <k6jek@comcast.net> wrote:
I haven't really tried the OMNI VII as an AM transmitter since I have
others -- class E, class D, Johnson, etc. I wonder if anyone on this
reflector has.
Jon
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|