OK thanks - interesting. Who knows then. Must be something magic about those
Tentec
microphones and processors.
It could be that the signal level is vastly different from what is expected by
the processor. Or it
could be that the signal level coming out of the processor is suitable for a
Tentec radio but
NOT suitable for the Drake radios etc. It certainly sounds to me like something
was
overdriving somewhere. You may have had some levels set wrong. Generally you
want to run
the mic gain in the radio a little higher, and reduce the drive level going
into it. With the
processor it wil lbe very important to use the correct drive level for your mic
signal going into
it, and have it be at the expected impedance. Any overdriving at any stage will
produce some
rough sounding audio.
73 de AF4K, Bry
On 18 Feb 2014 at 17:35, Joe W2KJ wrote:
> Howdy Bry:
>
> The 444D can be switched between HI and LO impedance...so that's not
> the problem...I also used a 600 ohm headset with similar
> results....it's not a mike impedance problem.
>
> 73, Joe W2KJ
>
> On Feb 18, 2014, at 4:20 PM, Brian Carling wrote:
>
> > It sounds like you might possibly have had an impedance mismatch.
> Most attend tech equipment and other modern equipment uses low
> impedance microphones, around 600 ohms.
> >
> > If you use microphones like the Shure 444 and other high impedance
> microphones, they can be loaded down and sound pretty terrible.
> >
> > Best regards - Bry Carling
> >
> >
> >
> >> On Feb 18, 2014, at 4:06 PM, Joe W2KJ <w2kj@bellsouth.net>
> wrote:
> >>
> >> Howdy Gang:
> >>
> >> Last year I bought a model 715 RF Speech Processor from Ten Tec
> and played with it for several months with my Drake gear but
> couldn't get the audio to sound good.
> >>
> >> A couple of weeks ago I called Ten Tec to let them know that the
> 715 wasn't working well with my Drake gear so they told me to send
> the unit back to them for a look-see.
> >>
> >> I received a brand new unit last week and still had the same
> problem of poor audio with my Drake gear...using a 444D mike
> provided excellent audio with the Drake stuff but not through the
> 715.
> >>
> >> Since the 30 day return policy was no longer in effect I couldn't
> get a refund from Ten Tec.
> >>
> >> I was told by a Ten Tec rep that a similar complaint was received
> from an amateur not getting good audio from his Collins gear with
> the 715.
> >>
> >> I guess the 715 is designed to work with newer gear...I have also
> heard that the 715 was designed to work FB with more "restricted
> audio" microphones...not sure exactly what that means though.
> >>
> >> The 715 gets excellent reviews on eHam Product Reviews..all using
> newer equipment not vintage gear.
> >>
> >> In any event, I appreciate the support I received from Ten Tec
> and have decided to sell the 715 since I can't use it with my Drake
> gear.
> >>
> >> I offer the unit for sale...it is brand new.....will ship for
> $175.00.
> >>
> >> It comes with a cable designed for Ten Tec equipment.
> >>
> >>
> >> Digital picture on request.
> >>
> >> Many thanks.
> >>
> >> 73, Joe W2KJ
> >>
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/tentec
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|