FWIW my Corsair does exactly the same thing on both counts.
On Feb 3, 2014, at 9:12 AM, A R wrote:
> I received my newly acquired Corsair (not II), s/n 718, and have a couple of
> questions:
>
> At cold start-up in the morning, it takes about a minute for the displayed
> frequency to stabilize and display the actual frequency. During that warm-up
> minute, all the display digits are toggling "randomly". Is this a common
> issue with the Corsairs? Is there a remedy?
>
> The noise blanker is ineffective with respect to eliminating or even
> noticeably reducing powerline-generated noise that my TRITON noise blanker
> completely eliminates. Again, is this a common issue with the Corsairs. If
> so, has anyone developed a modification that improves the effectiveness of
> the NB? The TRITON's NB is so effective in eliminating at least the noise
> that plagues me, I'd sure like to get the same NB effectiveness out of the
> Corsair. The NB's of the TRITON and Corsair are architecturally the same
> (signal flow and conditioning), so if the Corsairs have characteristically
> ineffective noise limiters, my powerline-generated noise is enough of an
> operating problem, that I would even entertain adapting the TRITON's NB to
> the Corsair....as a last resort.
>
> Allen------W7GIF
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|