TenTec Mailing List (thread)

[TenTec] USB to serial adapter cable that works with OMNI, KD2KBZ, 2019/01/30
[TenTec] USB to serial adapter cable that works with OMNI VI??, Peter Bertini, 2019/01/30
- Re: [TenTec] USB to serial adapter cable that works with OMNI VI??, GWP, 2019/01/30
[TenTec] Paragon Finals and other woes, Bwana Bob, 2019/01/28
- Re: [TenTec] Paragon Finals and other woes, Ben Hall, 2019/01/29
  - Re: [TenTec] Paragon Finals and other woes, MadScientist, 2019/01/29
- Re: [TenTec] Paragon Finals and other woes, ROLAND HOWELL via TenTec, 2019/01/29
- Re: [TenTec] Paragon Finals and other woes, Peter Bertini, 2019/01/29
  - Re: [TenTec] Paragon Finals and other woes, Phil Erickson, 2019/01/29
  - Re: [TenTec] Paragon Finals and other woes, Bwana Bob, 2019/01/30
- Re: [TenTec] Paragon Finals and other woes, Greg S via TenTec, 2019/01/29
- Re: [TenTec] Paragon Finals and other woes, Peter Bertini, 2019/01/29
[TenTec] RTTY filter, Steve Bookout, 2019/01/28
- Re: [TenTec] RTTY filter, Mike Cumbo, 2019/01/28
[TenTec] FOR SALE: RARE TEN-TEC TX-100 VACUUM TUBE TRANSMITTER, Jonathan Weiner via TenTec, 2019/01/28
[TenTec] 6.3 MHz SSB filters for sale, MadScientist, 2019/01/28
[TenTec] Omni D - possible VFO rebuild in my future, tfr001, 2019/01/27
- Re: [TenTec] Omni D - possible VFO rebuild in my future, Carlos, 2019/01/27
  - Re: [TenTec] Omni D - possible VFO rebuild in my future, Perry Ballinger, 2019/01/27
    - Re: [TenTec] Omni D - possible VFO rebuild in my future, Barry N1EU, 2019/01/28
- Re: [TenTec] Omni D - possible VFO rebuild in my future, Barry N1EU, 2019/01/27
[TenTec] Titan II Amplifier project, MadScientist, 2019/01/26
[TenTec] Hamfest acquisitions, w0ep, 2019/01/26
- Re: [TenTec] Hamfest acquisitions, Winston, 2019/01/26
  - Re: [TenTec] Hamfest acquisitions, MadScientist, 2019/01/26
- Re: [TenTec] Hamfest acquisitions, Rick, 2019/01/27
[TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/25
- Re: [TenTec] Omni VI+ IF board gain: what is normal?, MadScientist, 2019/01/25
  - Re: [TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/26
    - Re: [TenTec] Omni VI+ IF board gain: what is normal?, MadScientist, 2019/01/26
- Re: [TenTec] Omni VI+ IF board gain: what is normal?, Peter Bertini, 2019/01/26
  - Re: [TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/26
    - Re: [TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/26
- Re: [TenTec] Omni VI+ IF board gain: what is normal?, Peter Bertini, 2019/01/26
- Re: [TenTec] Omni VI+ IF board gain: what is normal?, Peter Bertini, 2019/01/26
  - Re: [TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/28
- Re: [TenTec] Omni VI+ IF board gain: what is normal?, Peter Bertini, 2019/01/29
  - Re: [TenTec] Omni VI+ IF board gain: what is normal?, Phil Erickson, 2019/01/29
[TenTec] Paragon EPROM, Ron Notarius W3WN, 2019/01/25
- Re: [TenTec] Paragon EPROM, Carl Moreschi, 2019/01/25
  - Re: [TenTec] Paragon EPROM, Ron Notarius W3WN, 2019/01/25
    - Re: [TenTec] Paragon EPROM, Ron Notarius W3WN, 2019/01/26
    - Re: [TenTec] Paragon EPROM, gyates, 2019/01/27
    - Re: [TenTec] Paragon EPROM, Carl Moreschi, 2019/01/27
[TenTec] Omni/Orion tuning tires?, Peter Bertini, 2019/01/25
- Re: [TenTec] Omni/Orion tuning tires?, MadScientist, 2019/01/25
- Re: [TenTec] Omni/Orion tuning tires?, Ralph, 2019/01/25
[TenTec] "Tires" for Paragon, Omni 5, 6 Orion Main Tuning Knob - New in Baggie, MadScientist, 2019/01/24
[TenTec] need some Omni VI chassis parts..., Peter Bertini, 2019/01/24
- Re: [TenTec] need some Omni VI chassis parts..., MadScientist, 2019/01/24
- Re: [TenTec] need some Omni VI chassis parts..., Peter Bertini, 2019/01/25
[TenTec] Orion parts, MadScientist, 2019/01/23
[TenTec] TEN TEC REPAIR, Michael Goins, 2019/01/23
- Re: [TenTec] TEN TEC REPAIR, cegtv1 via TenTec, 2019/01/23
- Re: [TenTec] TEN TEC REPAIR, K3GHH, 2019/01/23
- Re: [TenTec] TEN TEC REPAIR, Mike Cumbo, 2019/01/23
[TenTec] email, Mike Cumbo, 2019/01/22
[TenTec] Omni 6+ & accessories, Mike Cumbo, 2019/01/22
[TenTec] Orion 2 display, MadScientist, 2019/01/22
- Re: [TenTec] Orion 2 display, wa8wzg, 2019/01/22
  - Re: [TenTec] Orion 2 display, MadScientist, 2019/01/23
    - Re: [TenTec] Orion 2 display, W5SJL Amos Favorite, 2019/01/23
    - Re: [TenTec] Orion 2 display, MadScientist, 2019/01/23
    - Re: [TenTec] Orion 2 display, W5SJL Amos Favorite, 2019/01/24
    - Re: [TenTec] Orion 2 display, MadScientist, 2019/01/24
[TenTec] Ten Tec working telephone number needed, John King via TenTec, 2019/01/22
- Re: [TenTec] Ten Tec working telephone number needed, Wes Attaway (N5WA), 2019/01/22
[TenTec] Jupiter Screen Chip, Rick via TenTec, 2019/01/21
[TenTec] problem with no audio control on OMNI V, Brian, 2019/01/18
- Re: [TenTec] problem with no audio control on OMNI V, Brian, 2019/01/18
  - Re: [TenTec] problem with no audio control on OMNI V, MadScientist, 2019/01/18
- Re: [TenTec] problem with no audio control on OMNI V, Greg S via TenTec, 2019/01/18
[TenTec] Omni VI CPU down - REPAIRED!, MadScientist, 2019/01/15
- Re: [TenTec] Omni VI CPU down - REPAIRED!, Peter Bertini, 2019/01/15
[TenTec] Orion Xcvr, PS, and more FS, Ken, W8EK, 2019/01/15
[TenTec] FW: CII items for sale: PS, DDS VFO, filters, speech processor VFO is SOLD, Michael Tortorella, 2019/01/14
[TenTec] Visited Ten-Tec this week, Jill Dybka, 2019/01/14
- Re: [TenTec] Visited Ten-Tec this week, W5SJL Amos Favorite, 2019/01/14
  - Re: [TenTec] Visited Ten-Tec this week, MadScientist, 2019/01/14
    - Re: [TenTec] Visited Ten-Tec this week, W5SJL Amos Favorite, 2019/01/15
- Re: [TenTec] Visited Ten-Tec this week, K3GHH, 2019/01/15
- Re: [TenTec] Visited Ten-Tec this week, Byron Cordes via TenTec, 2019/01/15
- Re: [TenTec] Visited Ten-Tec this week, robert, 2019/01/15
  - Re: [TenTec] Visited Ten-Tec this week, Byron Cordes via TenTec, 2019/01/15
[TenTec] CII items for sale: PS, DDS VFO, filters, speech processor, Michael Tortorella, 2019/01/13
[TenTec] Looking for Manual: Model 606 Keyer, Rick, 2019/01/12
[TenTec] Omni VI+ ALC proper behavior, Phil Erickson, 2019/01/11
[TenTec] 160 meter TenTec 240 info wanted, Peter Bertini, 2019/01/10
- Re: [TenTec] 160 meter TenTec 240 info wanted, Carl Winkles, 2019/01/12
- Re: [TenTec] 160 meter TenTec 240 info wanted, Peter Bertini, 2019/01/12
[TenTec] Wanted: 2 pin Molex power cord for Argo VI, robert, 2019/01/09
[TenTec] For Sale: Ten-Tec Argonaut II model 535, Jonathan Weiner via TenTec, 2019/01/09
Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist), forum4ll, 2019/01/09
- Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist), Rodney, 2019/01/09
- Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist), Peter Bertini, 2019/01/09
- Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist), forum4ll, 2019/01/11
[TenTec] Omni-D Frequency Displays First Two Digits are Off, forum4ll, 2019/01/07
- Re: [TenTec] Omni-D Frequency Displays First Two Digits are Off, forum4ll, 2019/01/09
  - Re: [TenTec] Omni-D Frequency Displays First Two Digits are Off, Carlos, 2019/01/09
  - Re: [TenTec] Omni-D Frequency Displays First Two Digits are Off, MadScientist, 2019/01/09
- Re: [TenTec] Omni-D Frequency Displays First Two Digits are Off, forum4ll, 2019/01/11
[TenTec] TT vs Inrad filters, Paul DeWitte, 2019/01/06
- Re: [TenTec] TT vs Inrad filters, Barry N1EU, 2019/01/06
[TenTec] Repair of Ten-Tec Scout (?), Rick, 2019/01/06
- Re: [TenTec] Repair of Ten-Tec Scout (?), MadScientist, 2019/01/06
- [TenTec] Repair of Ten-Tec Scout (?), Mike Fishman NK8S, 2019/01/06
  - Re: [TenTec] Repair of Ten-Tec Scout (?), MadScientist, 2019/01/06
Re: [TenTec] Ten-Tec Filter Data, Ken Brown, 2019/01/05
[TenTec] Omni V PLL Board, Dry Martini Holding Company😎, 2019/01/04
[TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Phil Erickson, 2019/01/04
- Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Barry N1EU, 2019/01/05
  - Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), MadScientist, 2019/01/05
- Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Ken Brown, 2019/01/05
  - Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Barry N1EU, 2019/01/05
    - Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Phil Erickson, 2019/01/05
- Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Peter Bertini, 2019/01/05
  - Re: [TenTec] Omni Vi+ 1.8 kHz filter response (2nd IF @ 6.3 MHz), Phil Erickson, 2019/01/11
[TenTec] WTB: Omni VI opt 3 or Plus PARTS rig, junker, Peter Bertini, 2019/01/04
- Re: [TenTec] WTB: Omni VI opt 3 or Plus PARTS rig, junker, Byron Cordes via TenTec, 2019/01/04
- Re: [TenTec] WTB: Omni VI opt 3 or Plus PARTS rig, junker, Peter Bertini, 2019/01/05
[TenTec] Scout 555 no output repair?, Mike Fishman NK8S, 2019/01/04
[TenTec] Steve Hunt G3TXQ, Steve Hunt, 2019/01/03
- Re: [TenTec] Steve Hunt G3TXQ, P.C. Anderson, 2019/01/03
- Re: [TenTec] Steve Hunt G3TXQ, Jeff Sumner, 2019/01/03
[TenTec] Orion 565 Screen musings, Martin Sole, 2019/01/02
- Re: [TenTec] Orion 565 Screen musings, MadScientist, 2019/01/03
  - Re: [TenTec] Orion 565 Screen musings, Martin Sole, 2019/01/03
Re: [TenTec] Omni V repair, Stan, 2019/01/02
[TenTec] G3TXQ SK, Rick, 2019/01/02
- [TenTec] G3TXQ SK, dhhdeh, 2019/01/02
[TenTec] Fwd: Re: TenTec] Omni VI+: low TX and RX on 12 meters, Malcolm McLeman, 2019/01/02
- Re: [TenTec] Fwd: Re: TenTec] Omni VI+: low TX and RX on 12 meters, Phil Erickson, 2019/01/02
  - Re: [TenTec] Fwd: Re: TenTec] Omni VI+: low TX and RX on 12 meters, Phil Erickson, 2019/01/03
    - Re: [TenTec] Fwd: Re: TenTec] Omni VI+: low TX and RX on 12 meters, Malcolm McLeman, 2019/01/04
Re: [TenTec] Omni-D with an Annoying 1khz Tone, forum4ll, 2019/01/01
- Re: [TenTec] Omni-D with an Annoying 1khz Tone, forum4ll, 2019/01/02
  - Re: [TenTec] Omni-D with an Annoying 1khz Tone, Carlos, 2019/01/02
- Re: [TenTec] Omni-D with an Annoying 1khz Tone, forum4ll, 2019/01/07
  - Re: [TenTec] Omni-D with an Annoying 1khz Tone, MadScientist, 2019/01/07
- Re: [TenTec] Omni-D with an Annoying 1khz Tone, forum4ll, 2019/01/08
  - Re: [TenTec] Omni-D with an Annoying 1khz Tone, MadScientist, 2019/01/08
- Re: [TenTec] Omni-D with an Annoying 1khz Tone, forum4ll, 2019/01/17