Not sure what you mean by “eBay prices”, since many items I sell on eBay sell
for less than they sell for on QTH and similar sites…
In any case, I have the speaker bracket and the rear panel connector, with
correct length wires. I also have as many of the self-tapping hex head screws
as you could ever use.
Make me then a fair offer for the lot.
73
Gary
> On Jan 24, 2019, at 11:41 AM, Peter Bertini <radioconnection@gmail.com> wrote:
>
> Hello to the group... I picked up a "parts" Omni VI recently to keep as a
> spare and as test bed to repair boards.
>
> Unfortunately, it is missing the metal bracket that holds the internal
> speaker, and the Molex power connector on the rear panel was removed. I'd
> like to replace both missing parts. Could also use some of the hex head
> sheet metal screws they used for the bottom shield and chassis construction.
>
> Or, if someone has the Mouser part numbers for the chassis mount power
> connector and contacts, that would be great!
>
> Trying to do this for reasonable cost, not eBay prices. I ended up needing
> to recap and repair a hacked CPU board, and needed to replace an expensive
> DAC chip.
>
> Pete k1zjh
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|