[Amps] Cool Amp Silver Plating, Hardy Landskov, 2014/02/28

• Re: [Amps] Cool Amp Silver Plating, Fuqua, Bill L, 2014/02/28
  • Re: [Amps] Cool Amp Silver Plating, MU 4CX250B, 2014/02/28
  • Re: [Amps] Cool Amp Silver Plating, KA4INM, 2014/02/28
• Re: [Amps] Cool Amp Silver Plating, Dick Hanson, 2014/02/28
  • Re: [Amps] Cool Amp Silver Plating, Fuqua, Bill L, 2014/02/28
• Re: [Amps] Cool Amp Silver Plating, peter chadwick, 2014/02/28
  • Re: [Amps] Cool Amp Silver Plating, Carl, 2014/02/28
    • Re: [Amps] Cool Amp Silver Plating, Paul Christensen, 2014/02/28

[Amps] Eimac 8877, Dennis Homerick, 2014/02/27

• Re: [Amps] Eimac 8877, Gary Smith, 2014/02/27
  • Re: [Amps] Eimac 8877, Carl, 2014/02/27

[Amps] Simpson Panel Mtr Wanted, Jim Garland, 2014/02/25

• Re: [Amps] Simpson Panel Mtr Wanted, Radio WC6W, 2014/02/26

[Amps] Working on my Darwin award, Vic Rosenthal K2VCO, 2014/02/22

• Re: [Amps] Working on my Darwin award, Bill Turner, 2014/02/22
  • Re: [Amps] Working on my Darwin award, Paul Christensen, 2014/02/22
    • Re: [Amps] Working on my Darwin award, Bill Turner, 2014/02/23
    • [Amps] Another Re: Working on my Darwin award, Roger (K8RI), 2014/02/23
    • Re: [Amps] Working on my Darwin award, Paul Christensen, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Fuqua, Bill L, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Carl, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Bill Turner, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Bill Turner, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Tom Osborne, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Vic Rosenthal K2VCO, 2014/02/23
    • Re: [Amps] Working on my Darwin award, n8de, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Tom Osborne, 2014/02/23
    • Re: [Amps] Working on my Darwin award, Gary Smith, 2014/02/23
• Re: [Amps] Working on my Darwin award, Carl, 2014/02/22
  • Re: [Amps] Working on my Darwin award, Vic Rosenthal, 2014/02/22
• Re: [Amps] Working on my Darwin award, Don Jones, 2014/02/23
• Re: [Amps] Working on my Darwin award, Manfred Mornhinweg, 2014/02/24
  • Re: [Amps] Working on my Darwin award, Vic Rosenthal K2VCO, 2014/02/24
    • Re: [Amps] Working on my Darwin award, Roger (K8RI), 2014/02/24
• Re: [Amps] Working on my Darwin award, peter chadwick, 2014/02/25
  • Re: [Amps] Working on my Darwin award, Roger (K8RI), 2014/02/25
  • Re: [Amps] Working on my Darwin award, k7fm, 2014/02/25
    • Re: [Amps] Working on my Darwin award, Roger (K8RI), 2014/02/26
• Re: [Amps] Working on my Darwin award, Manfred Mornhinweg, 2014/02/26
  • Re: [Amps] Working on my Darwin award, Brian Carling, 2014/02/27
• Re: [Amps] Working on my Darwin award, peter chadwick, 2014/02/26

[Amps] HV Fuses, Jim Garland, 2014/02/22

• Re: [Amps] HV Fuses, KA4INM, 2014/02/22

[Amps] Duty cycle for processed SSB in contest conditions?, Conrad Farlow, 2014/02/22

• Re: [Amps] Duty cycle for processed SSB in contest conditions?, Bill Turner, 2014/02/22
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, Carl, 2014/02/22
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, Roger (K8RI), 2014/02/22
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, peter chadwick, 2014/02/23
  • Re: [Amps] Duty cycle for processed SSB in contest conditions?, Roger (K8RI), 2014/02/23
  • Re: [Amps] Duty cycle for processed SSB in contest conditions?, Karl-Arne Markström, 2014/02/23
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, Steve Thompson, 2014/02/23
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, peter chadwick, 2014/02/23
• Re: [Amps] Duty cycle for processed SSB in contest conditions?, peter chadwick, 2014/02/23

[Amps] Shipping SB200 with Tube Installed, Jim W7RY, 2014/02/22

• Re: [Amps] Shipping SB200 with Tube Installed, Eddy Swynar, 2014/02/22
• Re: [Amps] Shipping SB200 with Tube Installed, RAY FRIESS, 2014/02/22
• Re: [Amps] Shipping SB200 with Tube Installed, Carl, 2014/02/22
  • Re: [Amps] Shipping SB200 with Tube Installed, donroden, 2014/02/22

[Amps] More on server supplies, Conrad Farlow, 2014/02/21

• Re: [Amps] More on server supplies, Brian Carling, 2014/02/21

[Amps] QRO operation into a 80 meter vertical, donroden, 2014/02/20

• Re: [Amps] QRO operation into a 80 meter vertical, Carl, 2014/02/20
• Re: [Amps] QRO operation into a 80 meter vertical, Brian Carling, 2014/02/20
  • Re: [Amps] QRO operation into a 80 meter vertical, Carl, 2014/02/20
• Re: [Amps] QRO operation into a 80 meter vertical, peter chadwick, 2014/02/21
  • Re: [Amps] QRO operation into a 80 meter vertical, Mark Beckwith, 2014/02/21
    • Re: [Amps] QRO operation into a 80 meter vertical, donroden, 2014/02/21
    • Re: [Amps] QRO operation into a 80 meter vertical, Vic Rosenthal K2VCO, 2014/02/21
    • Re: [Amps] QRO operation into a 80 meter vertical, Carl, 2014/02/21
    • Re: [Amps] QRO operation into a 80 meter vertical, Jim Brown, 2014/02/27
  • Re: [Amps] QRO operation into a 80 meter vertical, Carl, 2014/02/21
• Re: [Amps] QRO operation into a 80 meter vertical, peter chadwick, 2014/02/22

[Amps] HB amp shakedown cruise, Jim Garland, 2014/02/20

• Re: [Amps] HB amp shakedown cruise, Philip Townsend Lontz, 2014/02/20

[Amps] MLA 2500 WO tubes, Dennis n5dpk, 2014/02/19

• Re: [Amps] MLA 2500 WO tubes, Dennis Kippa, 2014/02/20

[Amps] Drake, thomas haglund, 2014/02/19

• Re: [Amps] Drake, Paul Baldock, 2014/02/20

[Amps] Fan Noise in GS-35b Amplifiers, Jack C. Shutt, 2014/02/19

• Re: [Amps] Fan Noise in GS-35b Amplifiers, Bill Turner, 2014/02/19
• Re: [Amps] Fan Noise in GS-35b Amplifiers, N1BUG, 2014/02/20
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, mikflathead, 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, Jack C. Shutt, 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, Roger, 2014/02/24
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, Jack C. Shutt, 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, Roger (K8RI), 2014/02/20
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, Carl, 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, donroden, 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, Glen Zook, 2014/02/20
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, Roger, 2014/02/24
• Re: [Amps] Fan Noise in GS-35b Amplifiers, John G3UUT, 2014/02/21
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, Carl, 2014/02/21
• Re: [Amps] Fan Noise in GS-35b Amplifiers, TexasRF, 2014/02/20
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, k7fm, 2014/02/20
  • Re: [Amps] Fan Noise in GS-35b Amplifiers, Roger (K8RI), 2014/02/20
    • Re: [Amps] Fan Noise in GS-35b Amplifiers, Carl, 2014/02/21
• Re: [Amps] Fan Noise in GS-35b Amplifiers, peter chadwick, 2014/02/21

[Amps] Alpha 9500 quirks, Charles Harpole, 2014/02/17

• Re: [Amps] Alpha 9500 quirks, Kees - pa7two, 2014/02/18

[Amps] Sources for 3PDT RF Relay - Rated 15KW+, qrv@kd4e.com, 2014/02/16

• Re: [Amps] Sources for 3PDT RF Relay - Rated 15KW+, qrv@kd4e.com, 2014/02/18
• [Amps] Sources for 3PDT RF Relay - Rated 15KW+, Jim Thomson, 2014/02/20
  • Re: [Amps] Sources for 3PDT RF Relay - Rated 15KW+, qrv@kd4e.com, 2014/02/20
    • Re: [Amps] Sources for 3PDT RF Relay - Rated 15KW+, qrv@kd4e.com, 2014/02/20

[Amps] L4B supply, mikflathead, 2014/02/16

• Re: [Amps] L4B supply, Carl, 2014/02/16
  • Re: [Amps] L4B supply, Paul Baldock, 2014/02/16
• Re: [Amps] L4B supply, Carl, 2014/02/16
  • Re: [Amps] L4B supply, Paul Baldock, 2014/02/16

[Amps] Sb200 plate impedance, Ian Swain, 2014/02/16

• Re: [Amps] Sb200 plate impedance, Carl, 2014/02/16
  • Re: [Amps] Sb200 plate impedance, Fuqua, Bill L, 2014/02/16

[Amps] A Professionally Built Amplifier Claim, Jim W7RY, 2014/02/16

• Re: [Amps] A Professionally Built Amplifier Claim, Glen Zook, 2014/02/16
  • Re: [Amps] A Professionally Built Amplifier Claim, Brian Carling, 2014/02/16
  • Re: [Amps] A Professionally Built Amplifier Claim, Roger (K8RI), 2014/02/17
• Re: [Amps] A Professionally Built Amplifier Claim, Carl, 2014/02/16

[Amps] Clipperton L meter, k4pdm, 2014/02/16

• Re: [Amps] Clipperton L meter, Carl, 2014/02/16
• Re: [Amps] Clipperton L meter, k4pdm, 2014/02/16
• Re: [Amps] Clipperton L meter, k4pdm, 2014/02/16

[Amps] CISCO WS-CAC-2500W PSU a few questions, Conrad Farlow, 2014/02/16

• Re: [Amps] CISCO WS-CAC-2500W PSU a few questions, Col. Paul E. Cater, 2014/02/16

[Amps] Plate Voltage Not Stable, Ken Durand, 2014/02/15

• Re: [Amps] Plate Voltage Not Stable, Paul Baldock, 2014/02/15
• Re: [Amps] Plate Voltage Not Stable, Carl, 2014/02/15
  • Re: [Amps] Plate Voltage Not Stable, Carl, 2014/02/15
    • Re: [Amps] Plate Voltage Not Stable, Roger (K8RI), 2014/02/15

[Amps] Breakdown tester, RM 215 L2, Denis Jackson, 2014/02/15

• Re: [Amps] Breakdown tester, RM 215 L2, Vic Rosenthal K2VCO, 2014/02/15
• Re: [Amps] Breakdown tester, RM 215 L2, Chris Wilson, 2014/02/15
• Re: [Amps] Breakdown tester, RM 215 L2, peter chadwick, 2014/02/15
• Re: [Amps] Breakdown tester, RM 215 L2, Steve Thompson, 2014/02/15

[Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, qrv@kd4e.com, 2014/02/14

• Re: [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, Carl, 2014/02/14
• Re: [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, peter chadwick, 2014/02/15
  • Re: [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, Alek Petkovic, 2014/02/15
    • Re: [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, qrv@kd4e.com, 2014/02/15
  • Re: [Amps] 100+100uF 500VDC MLytic Dual High Voltage Capacitor?, Carl, 2014/02/15

[Amps] AL-811H resistors, Tom Osborne, 2014/02/14

• Re: [Amps] AL-811H resistors, Carl, 2014/02/14
• Message not available
  • Re: [Amps] AL-811H resistors, Tom Osborne, 2014/02/14
• Re: [Amps] AL-811H resistors, Robert Groh, 2014/02/15

[Amps] Force cooled heatsink aerodynamics, Alan Ibbetson, 2014/02/14

• Re: [Amps] Force cooled heatsink aerodynamics, Bill Turner, 2014/02/14
• Re: [Amps] Force cooled heatsink aerodynamics, Alan Ibbetson, 2014/02/15
  • Re: [Amps] Force cooled heatsink aerodynamics, Bill Turner, 2014/02/15
• Re: [Amps] Force cooled heatsink aerodynamics, Markku Oksanen, 2014/02/17
  • Re: [Amps] Force cooled heatsink aerodynamics, Roger (K8RI), 2014/02/17
• Re: [Amps] Force cooled heatsink aerodynamics, Markku Oksanen, 2014/02/19
  • Re: [Amps] Force cooled heatsink aerodynamics, Fuqua, Bill L, 2014/02/19
    • Re: [Amps] Force cooled heatsink aerodynamics, Fuqua, Bill L, 2014/02/19

[Amps] Umac 606, Colin Lamb, 2014/02/13

• Re: [Amps] Umac 606, donroden, 2014/02/13
  • Re: [Amps] Umac 606, Alek Petkovic, 2014/02/13
• Re: [Amps] Umac 606, Barrie - Yellowstone Photo, 2014/02/13
• Re: [Amps] Umac 606, Bill Turner, 2014/02/13

[Amps] Solid state relays..again, Jim Thomson, 2014/02/11

• Re: [Amps] Solid state relays..again, Roger (K8RI), 2014/02/11
• Re: [Amps] Solid state relays..again, John K Gotwals, 2014/02/11
  • Re: [Amps] Solid state relays..again, Roger (K8RI), 2014/02/11
• Re: [Amps] Solid state relays..again, Manfred Mornhinweg, 2014/02/12
  • Re: [Amps] Solid state relays..again, Ken Durand, 2014/02/13
    • Re: [Amps] Solid state relays..again, Jim W7RY, 2014/02/13
    • Re: [Amps] Solid state relays..again, Brian Carling, 2014/02/13
• Re: [Amps] Solid state relays..again, TexasRF, 2014/02/13
  • Re: [Amps] Solid state relays..again, Jeff Blaine, 2014/02/13
• Re: [Amps] Solid state relays..again, Manfred Mornhinweg, 2014/02/13
  • Re: [Amps] Solid state relays..again, MU 4CX250B, 2014/02/13

[Amps] Crouzet SSR - FAQs, Paul Kraemer, 2014/02/10

• [Amps] Crouzet SSR - FAQs, Jim Thomson, 2014/02/11
  • Re: [Amps] Crouzet SSR - FAQs, Roger (K8RI), 2014/02/11
• Re: [Amps] Crouzet SSR - FAQs, TexasRF, 2014/02/11

[Amps] Solid State Relays Again, Jim W7RY, 2014/02/09

• Re: [Amps] Solid State Relays Again, Jim Garland, 2014/02/09
  • Re: [Amps] Solid State Relays Again, Roger (K8RI), 2014/02/10
• Re: [Amps] Solid State Relays Again, Paul Christensen, 2014/02/10
• Re: [Amps] Solid State Relays Again, KA4INM, 2014/02/10
  • Re: [Amps] Solid State Relays Again, donroden, 2014/02/10
    • Re: [Amps] Solid State Relays Again, Jeff Blaine, 2014/02/10
• Re: [Amps] Solid State Relays Again, Paul Kraemer, 2014/02/10
• Re: [Amps] Solid State Relays Again, Paul Hewitt, 2014/02/11
• Re: [Amps] Solid State Relays Again, TexasRF, 2014/02/10
  • Re: [Amps] Solid State Relays Again, Robert Groh, 2014/02/10
  • Re: [Amps] Solid State Relays Again, Peter Voelpel, 2014/02/10
    • Re: [Amps] Solid State Relays Again, donroden, 2014/02/10
  • Re: [Amps] Solid State Relays Again, Paul Christensen, 2014/02/10
• Re: [Amps] Solid State Relays Again, peter chadwick, 2014/02/10
  • Re: [Amps] Solid State Relays Again, donroden, 2014/02/10
    • [Amps] Harris RF 102A, Jack Taylor, 2014/02/10
    • Re: [Amps] Solid State Relays Again, Mike Lucas, 2014/02/10
    • Re: [Amps] Solid State Relays Again, Jeff Blaine, 2014/02/10
    • Re: [Amps] Solid State Relays Again, Mike, 2014/02/10
    • Re: [Amps] Solid State Relays Again, Roger (K8RI), 2014/02/10
• Re: [Amps] Solid State Relays Again, TexasRF, 2014/02/10
  • Re: [Amps] Solid State Relays Again, Roger (K8RI), 2014/02/10
    • Re: [Amps] Solid State Relays Again, Larry Benko, 2014/02/11
    • Re: [Amps] Solid State Relays Again, Paul Christensen, 2014/02/11
• Re: [Amps] Solid State Relays Again, peter chadwick, 2014/02/10
• [Amps] Solid State Relays Again, Beefus, 2014/02/19

[Amps] AL-811H plate voltage, Tom Osborne, 2014/02/09

• Re: [Amps] AL-811H plate voltage, Carl, 2014/02/09
• Re: [Amps] AL-811H plate voltage, Robert Groh, 2014/02/09

[Amps] 3CX1500A7 versus 3CPX1500A7, Larry Critchfield, 2014/02/09

• Re: [Amps] 3CX1500A7 versus 3CPX1500A7, Carl, 2014/02/09
• Re: [Amps] 3CX1500A7 versus 3CPX1500A7, Robert Morris, 2014/02/09
  • Re: [Amps] 3CX1500A7 versus 3CPX1500A7, Glen Zook, 2014/02/09
  • Re: [Amps] 3CX1500A7 versus 3CPX1500A7, Alek Petkovic, 2014/02/09
  • Message not available
    • Re: [Amps] 3CX1500A7 versus 3CPX1500A7, Robert Morris, 2014/02/09

[Amps] transistor mounting question, dan, 2014/02/07

• Re: [Amps] transistor mounting question, Saandy, 2014/02/08

[Amps] SB-200 Plate Choke for 6 meters, Dennis W0JX, 2014/02/06

• Re: [Amps] SB-200 Plate Choke for 6 meters, Bill Turner, 2014/02/06

[Amps] Update on AL-1200 T/R Problem, Ken Asmus, 2014/02/06

• Re: [Amps] Update on AL-1200 T/R Problem, Carl, 2014/02/06
• Re: [Amps] Update on AL-1200 T/R Problem, Jim W7RY, 2014/02/07

[Amps] FW: FW: Air temps leaving the amp, Steve, 2014/02/06

• [Amps] FW: FW: FW: Air temps leaving the amp, Matt, 2014/02/07
  • Re: [Amps] FW: FW: FW: Air temps leaving the amp, Carl, 2014/02/07

[Amps] Turns counters, radio, 2014/02/03

• Re: [Amps] Turns counters, Robert Mccormack, 2014/02/03

[Amps] Air temps leaving the amp., Gary Smith, 2014/02/03

• Re: [Amps] Air temps leaving the amp., Roger (K8RI), 2014/02/03
  • Re: [Amps] Air temps leaving the amp., Jim Garland, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., Al Kozakiewicz, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., Roger (K8RI), 2014/02/03
    • Re: [Amps] Air temps leaving the amp., Carl, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., Al Kozakiewicz, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., KA4INM, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., MU 4CX250B, 2014/02/03
    • Re: [Amps] Air temps leaving the amp., qrv@kd4e.com, 2014/02/03
    • [Amps] FW: Air temps leaving the amp., Matt, 2014/02/03
• Re: [Amps] Air temps leaving the amp., Bill Turner, 2014/02/03
• [Amps] FW: Air temps leaving the amp., Matt, 2014/02/03
  • Re: [Amps] FW: Air temps leaving the amp., Carl, 2014/02/04
    • [Amps] FW: FW: Air temps leaving the amp., Matt, 2014/02/04
• [Amps] Air temps leaving the amp., Jim Thomson, 2014/02/03
• Re: [Amps] Air temps leaving the amp., peter chadwick, 2014/02/04

[Amps] Vacuum relay needed, Jim Garland, 2014/02/02

• Re: [Amps] Vacuum relay needed, donroden, 2014/02/02
  • Re: [Amps] Vacuum relay needed, qrv@kd4e.com, 2014/02/02
• Re: [Amps] Vacuum relay needed, Mike McCarthy, W1NR, 2014/02/03
  • Re: [Amps] Vacuum relay needed, Jim Garland, 2014/02/03
• Re: [Amps] Vacuum relay needed, peter chadwick, 2014/02/03

[Amps] Recommended Tuner for Clipperton L, qrv@kd4e.com, 2014/02/01

• Re: [Amps] Recommended Tuner for Clipperton L, Roger (K8RI), 2014/02/02
  • Re: [Amps] Recommended Tuner for Clipperton L, Carl, 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Roger (K8RI), 2014/02/02
    • Message not available
    • Re: [Amps] Recommended Tuner for Clipperton L, qrv@kd4e.com, 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Roger (K8RI), 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, qrv@kd4e.com, 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Roger (K8RI), 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Richard Solomon, 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, qrv@kd4e.com, 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Roger (K8RI), 2014/02/02
    • Re: [Amps] Recommended Tuner for Clipperton L, Carl, 2014/02/03
• Re: [Amps] Recommended Tuner for Clipperton L, peter chadwick, 2014/02/02

[Amps] Non-linear linear, Jim Thomson, 2014/02/01

• Re: [Amps] Non-linear linear, Joe Subich, W4TV, 2014/02/01

Re: [Amps] AL-1200 T/R problem, Roger (K8RI), 2014/02/01

• Re: [Amps] AL-1200 T/R problem, Fern, 2014/02/01
  • Re: [Amps] AL-1200 T/R problem, Joe Subich, W4TV, 2014/02/01
• [Amps] AL-1200 T/R problem, Jim Thomson, 2014/02/01