Galco is months-out before they have stock.
Array System wants nearly $50. shippped.
I'm thinking of looking for a reasonably priced set of
one SPST & one DPDT - sorting out acceptable specs online
is a challenge as most 12v 30A relays are not rated for HF.
David KD4E
This is to switch-in and out additional inductance at the
base of a 43' vertical for 160 & 80m.
It will occasionally be challenged with a 1KW+ (PEP) amp.
I was directed here:
http://www.galco.com/buy/Deltrol-Controls/21014-81
### Does it have to be a 3PDT ? Is this for a TR relay in an
amp..non qsk of course ? What bands does it have to operate on. Huge
difference between 80m....and 10m.
## You need a relay that will handle 20A of RF..at the highest freq
you operate on.
## If this is for the output of a linear..a better solution is to
use paralleled Gigavac G2 relays. That combo will handle 20 A CCS
on 10M band. Sped up they will operate and RLS in 2.5 msecs...so
they can be used qsk.
Jim VE7RF
I need a 3PDT RF relay rated for 15KW or better.
Is the $38.95 Array Solutions relay the best, perhaps only, option?
--
David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA
Safe & Secure Search Engine: duckduckgo.com
Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|