That looks like a nice accessory Vic, easy to build.
I use a small hand held 70's military unit that is bandswitching and tunable
as a sniffer but it is not for current. It has helped me pinpoint RF trouble
spots on feedlines, control cables, AC lines, etc No batteries needed.
Carl
----- Original Message -----
From: "Vic Rosenthal K2VCO" <k2vco.vic@gmail.com>
To: <amps@contesting.com>
Sent: Friday, February 21, 2014 12:02 PM
Subject: Re: [Amps] QRO operation into a 80 meter vertical
See <http://www.qsl.net/k2vco/sniffer/rfsniffer.html>.
This device can be calibrated, but for most purposes a relative indication
is adequate.
On 2/21/2014 6:25 AM, Mark Beckwith wrote:
I don't know how to measure current in radials
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4335 / Virus Database: 3705/7113 - Release Date: 02/21/14
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|