Amps
[Top] [All Lists]

Re: [Amps] 3CX1500A7 versus 3CPX1500A7

To: Larry Critchfield <ws3z@lhtot.com>
Subject: Re: [Amps] 3CX1500A7 versus 3CPX1500A7
From: Robert Morris <robrk@nidhog.net>
Date: Sun, 9 Feb 2014 11:36:27 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Do you know what the voltage at the pins measure now? 

Unless you have a variac in line, I bet it's not 5.000.

Most of the old transformers in my junk box are 115v.

My line voltage, as we speak is 121 and has been know to go to 124.

Calls to the power company, in summer, when they are fighting all the air 
conditioning and it goes to 127 and all my UPS's start yelling.

A 100 watt Variac or Powerstat and a meter calibrated at the pins, fixes both 
issues.

.


On Feb 7, 2014, at 12:13 PM, Larry Critchfield wrote:

Hi John,
Do I have to worry about the .5 volt filament voltage for the 3CPX ??
I do not want to modify my amp for 5.5 and then have to switch back
to use my 8877's plus the cost of new parts.
Thanks
Larry
WS3Z
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>