[Amps] IMD vs CW BW., Jim Thomson, 2016/12/30

• Re: [Amps] IMD vs CW BW., Jim Brown, 2016/12/31

[Amps] Alpha 87A Fault 17, Charlie Young, 2016/12/30

• Re: [Amps] Alpha 87A Fault 17, Jim W7RY, 2016/12/31
  • Re: [Amps] Alpha 87A Fault 17, Jerry O. Stern, 2016/12/31
    • Re: [Amps] Alpha 87A Fault 17, Charlie Young, 2016/12/31
    • Message not available
    • Re: [Amps] Alpha 87A Fault 17, Paul Baldock, 2016/12/31
    • Re: [Amps] Alpha 87A Fault 17, Jerry O. Stern, 2016/12/31
    • Re: [Amps] Alpha 87A Fault 17, Dick Green WC1M, 2016/12/31

[Amps] 9500 idle current, Jay Terleski, 2016/12/29

• Re: [Amps] 9500 idle current, BRADLEY FOCKEN, 2016/12/29
  • Re: [Amps] 9500 idle current, Paul Christensen, 2016/12/29
• Re: [Amps] 9500 idle current, Ken Durand, 2016/12/31

[Amps] Alpha 9500 Idling Current, Larry P. Greenberg, 2016/12/29

• Re: [Amps] Alpha 9500 Idling Current, Paul Christensen, 2016/12/29
  • Re: [Amps] Alpha 9500 Idling Current, Vic Rosenthal 4X6GP, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Paul Christensen, 2016/12/29
  • [Amps] Re Alpha 9500 Idling Current, Fern Rivard, 2016/12/29
  • Re: [Amps] Alpha 9500 Idling Current, Jim Garland, 2016/12/29
  • Re: [Amps] Alpha 9500 Idling Current, Bill Turner, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, BRADLEY FOCKEN, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Paul Christensen, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Fern Rivard, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Alek Petkovic, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Richard Solomon, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, BRADLEY FOCKEN, 2016/12/29
    • Re: [Amps] Alpha 9500 Idling Current, Fern Rivard, 2016/12/30

[Amps] FCC Denies Expert Linears' Request for Waiver of, Jim Thomson, 2016/12/28

• Re: [Amps] FCC Denies Expert Linears' Request for Waiver of, Mark Bitterlich, 2016/12/28
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of, qrv@kd4e.com, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of, Ken K6MR, 2016/12/28
• [Amps] FCC Denies Expert Linears' Request for Waiver of, Jim Thomson, 2016/12/28
• [Amps] FCC Denies Expert Linears' Request for Waiver of, Jim Thomson, 2016/12/28

[Amps] re idling current alpha 9500 amp, Jim Thomson, 2016/12/28

• [Amps] re idling current alpha 9500 amp, Paul Christensen, 2016/12/29
  • Re: [Amps] re idling current alpha 9500 amp, K1WPO, Joe via Amps, 2016/12/29

[Amps] amp keying, ka9egw, 2016/12/28

• [Amps] re idling current alpha 9500 amp, Fern Rivard, 2016/12/28

[Amps] More about amplifier keying, KA9EGW, 2016/12/28

• [Amps] More about amplifier keying, Paul Christensen, 2016/12/28
  • Re: [Amps] More about amplifier keying, Jerry O. Stern, 2016/12/28
• Re: [Amps] More about amplifier keying, Paul Christensen, 2016/12/28

Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Manfred Mornhinweg, 2016/12/28

• Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Joe, 2016/12/28
• Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Peter Voelpel, 2016/12/28
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Joe, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Kevin, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, qrv@kd4e.com, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Joe Subich, W4TV, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Jim Brown, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Richard Solomon, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Jim Brown, 2016/12/28
    • Message not available
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Paul Baldock, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Jim Brown, 2016/12/29
  • Re: [Amps] Class E amp (was FCC Denies Expert Linears' Request for Waiver of 15 dBRule), Manfred Mornhinweg, 2016/12/30
• Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Rob Atkinson, 2016/12/30
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, qrv@kd4e.com, 2016/12/30
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Jim Brown, 2016/12/30
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Bill Turner, 2016/12/30
• Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Rob Atkinson, 2016/12/31
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, John Watkins via Amps, 2016/12/31

[Amps] keying issue resolved, ka9egw, 2016/12/28

• Re: [Amps] keying issue resolved, Jim Garland, 2016/12/28
  • Re: [Amps] keying issue resolved, ka9egw, 2016/12/28
    • Re: [Amps] keying issue resolved, Jim Garland, 2016/12/28

[Amps] FCC Denies Expert Linears’ Request for Waiver of 15 dB Rule, Morel Grunberg, 2016/12/28

• Re: [Amps] FCC Denies Expert Linears’ Request for Waiver of 15 dB Rule, Charles H, 2016/12/28
  • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Leigh Turner, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Jim W7RY, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, aborg via Amps, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Paul Christensen, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Kim Elmore, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dBRule, Jim W7RY, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Jim Brown, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, DavidC KD4E, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Leigh Turner, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, qrv@kd4e.com, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Leigh Turner, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Bill Turner, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Mark Bitterlich, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Steve Bookout, 2016/12/28
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, qrv@kd4e.com, 2016/12/29
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Gary Smith, 2016/12/30
    • Re: [Amps] FCC Denies Expert Linears' Request for Waiver of 15 dB Rule, Bill Turner, 2016/12/29
• Re: [Amps] FCC Denies Expert Linears’ Request for Waiver of 15 dB Rule, Roger (K8RI), 2016/12/28
  • Re: [Amps] FCC Denies Expert Linears’ Request for Waiver of 15 dB Rule, Bill Turner, 2016/12/29
    • Re: [Amps] FCC Denies Expert Linears’ Request for Waiver of 15 dB Rule, Roger (K8RI), 2016/12/29

[Amps] 30L1 keying, ka9egw, 2016/12/27

• Re: [Amps] 30L1 keying, Jerry O. Stern, 2016/12/27
  • Re: [Amps] 30L1 keying, Jim Garland, 2016/12/27
    • Re: [Amps] 30L1 keying, Jim Garland, 2016/12/27
• Re: [Amps] 30L1 keying, David Gow, 2016/12/27
  • Re: [Amps] 30L1 keying, David Harmon, 2016/12/27
    • Re: [Amps] 30L1 keying, Fern Rivard, 2016/12/28

Re: [Amps] Amps Digest, Vol 168, Issue 98, Steve Wright, 2016/12/26

• Re: [Amps] GS-35B tube issue, Paul Baldock, 2016/12/26

[Amps] Plate transformer, Jeff Pederson via Amps, 2016/12/26

• Re: [Amps] Plate transformer, Bryan Swadener via Amps, 2016/12/27

[Amps] GS-35B tube issue, Paul Baldock, 2016/12/25

• Re: [Amps] GS-35B tube issue, Ron Youvan, 2016/12/26
• [Amps] GS-35B tube issue, Jim Thomson, 2016/12/29
  • Re: [Amps] GS-35B tube issue, Paul Baldock, 2016/12/29

[Amps] TRANS WORLD TW500A-RM, Emile Venter, 2016/12/21

• Re: [Amps] TRANS WORLD TW500A-RM, David Gow, 2016/12/21
• Re: [Amps] TRANS WORLD TW500A-RM, Steve Thompson, 2016/12/21
  • Re: [Amps] TRANS WORLD TW500A-RM, qrv@kd4e.com, 2016/12/21
    • Re: [Amps] TRANS WORLD TW500A-RM, David Gow, 2016/12/21
• Re: [Amps] TRANS WORLD TW500A-RM, Steve, 2016/12/22
  • Re: [Amps] TRANS WORLD TW500A-RM, Steve, 2016/12/23

[Amps] Modern AM Broadcast Transmiters, Donald Fox via Amps, 2016/12/18

• Re: [Amps] Modern AM Broadcast Transmiters, Joe Subich, W4TV, 2016/12/18
  • Re: [Amps] Modern AM Broadcast Transmiters, donroden, 2016/12/18
    • Re: [Amps] Modern AM Broadcast Transmiters, Jim Brown, 2016/12/19
    • Message not available
    • Re: [Amps] Modern AM Broadcast Transmiters, Bill Steffey NY9H, 2016/12/19
    • Message not available
    • Re: [Amps] Modern AM Broadcast Transmiters, Bill Steffey NY9H, 2016/12/19

[Amps] Harris DX transmitters, John Lyles, 2016/12/18

• Re: [Amps] Harris DX transmitters, donroden, 2016/12/18

[Amps] Modern AM Broadcast Transmitters, Donald Fox via Amps, 2016/12/18

• Re: [Amps] Modern AM Broadcast Transmitters, donroden, 2016/12/18
  • Re: [Amps] Modern AM Broadcast Transmitters, Jim Brown, 2016/12/18
• Re: [Amps] Modern AM Broadcast Transmitters, Bryan Swadener via Amps, 2016/12/18
  • Re: [Amps] Modern AM Broadcast Transmitters, donroden, 2016/12/18

[Amps] Time to back up- SS and autotune, Roger (K8RI), 2016/12/17

• Re: [Amps] Time to back up- SS and autotune, Bill Turner, 2016/12/17
  • Re: [Amps] Time to back up- SS and autotune, qrv@kd4e.com, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Bill Turner, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Paul Christensen, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Bill Turner, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, RCM, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Roger (K8RI), 2016/12/18
    • [Amps] Modern AM Broadcast Transmitters, donroden, 2016/12/18
    • Re: [Amps] Time to back up- SS and autotune, Ron Youvan, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Paul Christensen, 2016/12/18
  • Re: [Amps] Time to back up- SS and autotune, Roger (K8RI), 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, qrv@kd4e.com, 2016/12/17
    • Re: [Amps] Time to back up- SS and autotune, Ron Youvan, 2016/12/17
• Re: [Amps] Time to back up- SS and autotune, Steve Thompson, 2016/12/17
  • Re: [Amps] Time to back up- SS and autotune, donroden, 2016/12/17

[Amps] Idiosyncratic opinion on amp choices, Charles H, 2016/12/15

• Re: [Amps] Idiosyncratic opinion on amp choices, Bill Turner, 2016/12/15
• Re: [Amps] Idiosyncratic opinion on amp choices, Bill Turner, 2016/12/15
• Re: [Amps] Idiosyncratic opinion on amp choices, BJ, 2016/12/15
  • Re: [Amps] Idiosyncratic opinion on amp choices, Jim Brown, 2016/12/16
    • Re: [Amps] Idiosyncratic opinion on amp choices, Joe Giacobello, K2XX via Amps, 2016/12/16
    • Re: [Amps] Idiosyncratic opinion on amp choices, Bill Ashby, 2016/12/19
    • Re: [Amps] Idiosyncratic opinion on amp choices, David Gow, 2016/12/19

[Amps] Cathy's mail, Manfred Mornhinweg, 2016/12/15

• Re: [Amps] Cathy's mail, Ron Youvan, 2016/12/15

[Amps] Cabinets was: Par Metals, Steve Wright, 2016/12/14

• [Amps] Cabinets was: Par Metals, Michael Holderfield, 2016/12/14

[Amps] Par Metals, kf8od--- via Amps, 2016/12/14

• Re: [Amps] Par Metals, Alek Petkovic, 2016/12/14
  • Re: [Amps] Par Metals, Bill Turner, 2016/12/14
  • Re: [Amps] Par Metals, Russ Williams via Amps, 2016/12/14
• Re: [Amps] Par Metals, Paul Christensen, 2016/12/14

[Amps] TL922 efficiency, Vic Rosenthal 4X6GP, 2016/12/12

• [Amps] TL922 efficiency, Jim Thomson, 2016/12/12
• Re: [Amps] TL922 efficiency, Manfred Mornhinweg, 2016/12/12

[Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12

• Re: [Amps] Drake L4B to 6 Meters Help, Ron Youvan, 2016/12/12
  • Re: [Amps] Drake L4B to 6 Meters Help, Alek Petkovic, 2016/12/12
• Re: [Amps] Drake L4B to 6 Meters Help correction, Ron Youvan, 2016/12/12
• Message not available
  • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, Peter Frenning [OZ1PIF], 2016/12/12
• Message not available
  • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Message not available
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, Paul Baldock, 2016/12/12
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, mike via Amps, 2016/12/12
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, gudguyham--- via Amps, 2016/12/13
    • Message not available
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
• [Amps] Drake L4B to 6 Meters Help, Jim Thomson, 2016/12/12
  • Re: [Amps] Drake L4B to 6 Meters Help, Ed Stallman, 2016/12/12
• [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
  • Message not available
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, Paul Baldock, 2016/12/12
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
    • Re: [Amps] Drake L4B to 6 Meters Help, gudguyham--- via Amps, 2016/12/13
    • Re: [Amps] Drake L4B to 6 Meters Help, Joe, 2016/12/13
    • Re: [Amps] Drake L4B to 6 Meters Help, gudguyham--- via Amps, 2016/12/13
    • Re: [Amps] Drake L4B to 6 Meters Help, gudguyham--- via Amps, 2016/12/13
• [Amps] Drake L4B to 6 Meters Help, Jim Thomson, 2016/12/12
  • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
• [Amps] Drake L4B to 6 Meters Help, Jim Thomson, 2016/12/12
• [Amps] Drake L4B to 6 Meters Help, Jim Thomson, 2016/12/12
  • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12
  • Re: [Amps] Drake L4B to 6 Meters Help, Jim Thomson, 2016/12/13
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/13
    • Re: [Amps] Drake L4B to 6 Meters Help, Paul Baldock, 2016/12/15
    • [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/15
• [Amps] Drake L4B to 6 Meters Help, Michelle, 2016/12/12

[Amps] MOSFET amp filtering - was: auto-tune, Steve Wright, 2016/12/11

• Re: [Amps] MOSFET amp filtering - was: auto-tune, Bill Turner, 2016/12/11
  • Message not available
    • Message not available
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Ron Youvan, 2016/12/11
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Steve Wright, 2016/12/12
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Bill Turner, 2016/12/12
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Catherine James, 2016/12/12
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/12
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/12
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/12
• [Amps] MOSFET amp filtering - was: auto-tune, Jim Thomson, 2016/12/12
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Catherine James, 2016/12/12
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/12
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Tom Thompson, 2016/12/12
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/12
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Tom Thompson, 2016/12/13
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/13
    • Re: [Amps] MOSFET amp filtering - was: auto-tune / PEC ground, Leigh Turner, 2016/12/14
    • Re: [Amps] Vertical Ant & Ground Loss [WAS: MOSFET amp filtering], qrv@kd4e.com, 2016/12/12
    • Re: [Amps] Vertical Ant & Ground Loss [WAS: MOSFET amp filtering now soil], Ron Youvan, 2016/12/13
    • Re: [Amps] Vertical Ant & Ground Loss [WAS: MOSFET amp filtering now soil], donroden, 2016/12/13
    • Re: [Amps] Vertical Ant & Ground Loss [WAS: MOSFET amp filtering now soil], Jim Brown, 2016/12/13
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/12
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/12
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jeff AC0C, 2016/12/12
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/14
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Gary Schafer, 2016/12/15
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/15
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/15
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Joe Subich, W4TV, 2016/12/15
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Bill Turner, 2016/12/15
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Joe Subich, W4TV, 2016/12/15
• Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg, 2016/12/16
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, sm0aom@telia.com, 2016/12/16
    • Re: [Amps] MOSFET amp filtering - was: auto-tune, Peter Voelpel, 2016/12/16
• [Amps] MOSFET amp filtering - was: auto-tune, Jim Thomson, 2016/12/16
  • Re: [Amps] MOSFET amp filtering - was: auto-tune, Jim Brown, 2016/12/16

Re: [Amps] Amps Digest, Vol 168, Issue 55, Gary Smith via Amps, 2016/12/11

• Re: [Amps] Amps Digest, Vol 168, Issue 55, RCM, 2016/12/11
  • [Amps] AC Line Voltage, Jim W7RY, 2016/12/11
    • Re: [Amps] AC Line Voltage, Glen Zook via Amps, 2016/12/12

[Amps] L7 FIXED (was L7 problems), Paul Kraemer, 2016/12/11

• Re: [Amps] L7 FIXED (was L7 problems), Alek Petkovic, 2016/12/11
• Re: [Amps] L7 FIXED (was L7 problems), Jim W7RY, 2016/12/11
• Re: [Amps] L7 FIXED (was L7 problems), Jim W7RY, 2016/12/11
• [Amps] L7 FIXED (was L7 problems), Jim Thomson, 2016/12/12
  • Re: [Amps] L7 FIXED (was L7 problems), Jim W7RY, 2016/12/18
  • Re: [Amps] L7 FIXED (was L7 problems), Jim Thomson, 2016/12/19

Re: [Amps] HIGH FILAMENT VOLTAGE, kenneth Johnson, 2016/12/10

• Re: [Amps] HIGH FILAMENT VOLTAGE, Mike Waters, 2016/12/10
  • Re: [Amps] HIGH FILAMENT VOLTAGE, w8hw, 2016/12/10
    • Re: [Amps] HIGH FILAMENT VOLTAGE, Jim Hargrave, 2016/12/10
    • Re: [Amps] HIGH FILAMENT VOLTAGE, Bill Turner, 2016/12/11
    • Re: [Amps] HIGH FILAMENT VOLTAGE, w8hw, 2016/12/11
    • Re: [Amps] HIGH FILAMENT VOLTAGE, Jim Hargrave, 2016/12/11
    • Re: [Amps] HIGH FILAMENT VOLTAGE, Richard Solomon, 2016/12/11
• Re: [Amps] HIGH FILAMENT VOLTAGE, Richard Solomon, 2016/12/10
  • Re: [Amps] HIGH FILAMENT VOLTAGE, Vic Rosenthal, 2016/12/11
• Re: [Amps] HIGH FILAMENT VOLTAGE, Bryan Swadener via Amps, 2016/12/11
  • Re: [Amps] HIGH FILAMENT VOLTAGE, RCM, 2016/12/11
    • Re: [Amps] HIGH FILAMENT VOLTAGE, Jim W7RY, 2016/12/11
• Re: [Amps] HIGH FILAMENT VOLTAGE, Bryan Swadener via Amps, 2016/12/11

Re: [Amps] Line voltage high, Stirling Schmidt, 2016/12/10

• Re: [Amps] Line voltage high, Mike Waters, 2016/12/10

[Amps] FS Bird Model 43 Wattmeter Elements (slugs), John Watkins via Amps, 2016/12/10

• Re: [Amps] FS Bird Model 43 Wattmeter Elements (slugs), John Watkins via Amps, 2016/12/10

[Amps] Line voltage high., Ken Durand, 2016/12/10

• Re: [Amps] Line voltage high., Ken Durand, 2016/12/10
• Re: [Amps] Line voltage high., Steve Wright, 2016/12/10
  • Re: [Amps] Line voltage high., Mike Waters, 2016/12/10
    • Re: [Amps] Line voltage high., Alek Petkovic, 2016/12/10
    • Re: [Amps] Line voltage high., Mike Waters, 2016/12/11
    • Re: [Amps] Line voltage high., Ron Youvan, 2016/12/11
    • Re: [Amps] Line voltage high., RCM, 2016/12/11
    • Re: [Amps] Line voltage high., Mike Waters, 2016/12/11
• Re: [Amps] Line voltage high., Bryan Swadener via Amps, 2016/12/10

Re: [Amps] Amps Digest, Vol 168, Issue 46, Joe, 2016/12/09

• Re: [Amps] Amps Digest, Vol 168, Issue 46, Ron Youvan, 2016/12/09
  • Re: [Amps] Amps Digest, Vol 168, Issue 46, Jim Hargrave, 2016/12/09
• Re: [Amps] Amps Digest, Vol 168, Issue 46, Chris Hays, 2016/12/10

Re: [Amps] Alpha fault 17, K2CB, 2016/12/09

• Re: [Amps] Alpha fault 17, Don Moman VE6JY, 2016/12/09
  • Re: [Amps] Alpha fault 17, Jerry O. Stern, 2016/12/09
    • Re: [Amps] Alpha fault 17, Don Moman VE6JY, 2016/12/09
    • Re: [Amps] Alpha fault 17, Jerry O. Stern, 2016/12/09
    • Re: [Amps] Alpha fault 17, Don Moman VE6JY, 2016/12/09
• Re: [Amps] Alpha fault 17, Dick Green WC1M, 2016/12/09
  • Re: [Amps] Alpha fault 17, k2cb, 2016/12/09
    • Re: [Amps] Alpha fault 17, Dick Green WC1M, 2016/12/09
    • Re: [Amps] Alpha fault 17, k2cb, 2016/12/09
    • Re: [Amps] Alpha fault 17, Dick Green WC1M, 2016/12/09

[Amps] L7 problems, Paul Kraemer, 2016/12/08

• Re: [Amps] L7 problems, joeduerbusch, 2016/12/09
• Re: [Amps] L7 problems, Jim W7RY, 2016/12/09
• [Amps] L7 problems, Jim Thomson, 2016/12/09
  • Re: [Amps] L7 problems, Paul Kraemer, 2016/12/09
    • Re: [Amps] L7 problems, Alek Petkovic, 2016/12/09
    • Message not available
    • Re: [Amps] L7 problems, Alek Petkovic, 2016/12/10

[Amps] Alpha 87a issues - fault 17, Don Moman VE6JY, 2016/12/08

• Re: [Amps] Alpha 87a issues - fault 17, Jerry O. Stern, 2016/12/09

[Amps] Yes SS needs ant tuner., Charles H, 2016/12/08

• [Amps] Yes SS needs ant tuner., Charles H, 2016/12/08
  • Re: [Amps] Yes SS needs ant tuner., Roger (K8RI), 2016/12/14
• [Amps] Yes SS needs ant tuner., Jim Thomson, 2016/12/14
  • Re: [Amps] Yes SS needs ant tuner., Roger (K8RI), 2016/12/15

[Amps] 600W vs 1.5KW amps was: Re: SS amps and, Jim Thomson, 2016/12/08

• Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and, BJ, 2016/12/08

[Amps] S-units, Catherine James, 2016/12/08

• [Amps] S-units, Jim Thomson, 2016/12/08

[Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Steve Wright, 2016/12/07

• Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., qrv@kd4e.com, 2016/12/07
  • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Alek Petkovic, 2016/12/07
    • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Leigh Turner, 2016/12/08
  • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Fern Rivard, 2016/12/07
    • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Bill Turner, 2016/12/08
    • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Jim Brown, 2016/12/08
    • Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Ron Youvan, 2016/12/08
• Re: [Amps] 600W vs 1.5KW amps was: Re: SS amps and autotune..., Ron Youvan, 2016/12/08

[Amps] Pulls?, Catherine James, 2016/12/06

• Re: [Amps] Pulls?, Catherine James, 2016/12/07
  • Re: [Amps] Pulls?, K6UJ Bob Harmon, 2016/12/07
    • Re: [Amps] Pulls?, MU 4CX250B, 2016/12/07
  • Re: [Amps] Pulls?, Jeff Breitner, 2016/12/07
  • Re: [Amps] Pulls?, donroden, 2016/12/07
  • Re: [Amps] Pulls?, RAY FRIESS, 2016/12/07
    • Re: [Amps] Pulls?, Jeff AC0C, 2016/12/07
    • Re: [Amps] Pulls?, Joe, 2016/12/07
    • Re: [Amps] Pulls?, Doug Ronald, 2016/12/08

[Amps] COST OF AMPS/RIGS, Steve Bookout, 2016/12/06

• Re: [Amps] COST OF AMPS/RIGS, Bill Turner, 2016/12/06
  • Re: [Amps] COST OF AMPS/RIGS, Jim Hargrave, 2016/12/06
    • Re: [Amps] COST OF AMPS/RIGS, Bill Turner, 2016/12/07
    • Re: [Amps] COST OF AMPS/RIGS, Jim Hargrave, 2016/12/07
    • Re: [Amps] COST OF AMPS/RIGS, Glen Zook via Amps, 2016/12/08
    • Re: [Amps] COST OF AMPS/RIGS, Mike Waters, 2016/12/08

[Amps] SS amps and auto-tune. Is it even necessary?, Roger (K8RI), 2016/12/06

• [Amps] SS amps and auto-tune. Is it even necessary?, Jim Thomson, 2016/12/07
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Roger (K8RI), 2016/12/14
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, Catherine James, 2016/12/07
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Leigh Turner, 2016/12/07
    • Re: [Amps] SS amps and auto-tune. Is it even necessary?, qrv@kd4e.com, 2016/12/07
    • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Leigh Turner, 2016/12/07
    • Re: [Amps] the 600 watt amp, Catherine James, 2016/12/08
    • Re: [Amps] the 600 watt amp, Leigh Turner, 2016/12/08
    • Re: [Amps] the 600 watt amp, gudguyham--- via Amps, 2016/12/08
    • Re: [Amps] Experimenting, Catherine James, 2016/12/08
    • Re: [Amps] Experimenting, Jim W7RY, 2016/12/08
    • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Tom Georgens, 2016/12/08
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Roger (K8RI), 2016/12/14
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, Ken K6MR, 2016/12/08
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, Manfred Mornhinweg, 2016/12/09
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Tom Georgens, 2016/12/10
    • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Leigh Turner, 2016/12/10
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, Steve Thompson, 2016/12/11
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, qrv@kd4e.com, 2016/12/11
• [Amps] SS amps and auto-tune. Is it even necessary?, Jim Thomson, 2016/12/12
  • Re: [Amps] SS amps and auto-tune. Is it even necessary?, Tom Georgens, 2016/12/12
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, alexeban, 2016/12/14
• Re: [Amps] SS amps and auto-tune. Is it even necessary?, Manfred Mornhinweg, 2016/12/14

[Amps] triode vs tetrode, Joe, 2016/12/05

• Re: [Amps] triode vs tetrode, mike via Amps, 2016/12/05
• Re: [Amps] triode vs tetrode, Mike Waters, 2016/12/05
• Re: [Amps] triode vs tetrode, Fern Rivard, 2016/12/05
  • Re: [Amps] triode vs tetrode, Mike Waters, 2016/12/05
  • Re: [Amps] triode vs tetrode, Ian White, 2016/12/06
• Re: [Amps] triode vs tetrode, Ken K6MR, 2016/12/05
• [Amps] triode vs tetrode, Jim Thomson, 2016/12/06
• [Amps] triode vs tetrode, Jim Thomson, 2016/12/06
• [Amps] triode vs tetrode, Rex Greenwell, 2016/12/09
  • Re: [Amps] triode vs tetrode, Paul Kraemer, 2016/12/09

Re: [Amps] (no subject), Robert Dorchuck W6VY via Amps, 2016/12/05

• Re: [Amps] (no subject), Gary Smith, 2016/12/27

[Amps] Alpha 9500 serial numbers vs. production dates?, bob, 2016/12/05

• Re: [Amps] Alpha 9500 serial numbers vs. production dates?, Arthur Movius, 2016/12/05

[Amps] Value of a fully upgraded SB220?, Chas Hamilton, 2016/12/05

• Re: [Amps] Value of a fully upgraded SB220?, Catherine James, 2016/12/05
• Re: [Amps] Value of a fully upgraded SB220?, Bryan Swadener via Amps, 2016/12/05
  • Re: [Amps] Value of a fully upgraded SB220?, Catherine James, 2016/12/05
    • Re: [Amps] Value of a fully upgraded SB220?, Bruce Osterberg, 2016/12/05

[Amps] Is it legal?, Bill Turner, 2016/12/04

• Re: [Amps] Is it legal?, Paul Christensen, 2016/12/05
• Re: [Amps] Is it legal?, Bill Coleman, 2016/12/05
• Re: [Amps] Is it legal?, Roger (K8RI), 2016/12/05

[Amps] Collins 30S1 costs, mike via Amps, 2016/12/03

• Re: [Amps] Collins 30S1 costs, Paul Baldock, 2016/12/03
  • Re: [Amps] Collins 30S1 costs, Charles H, 2016/12/04

[Amps] Stock up on tubes?, Catherine James, 2016/12/03

• Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/04
  • Re: [Amps] Stock up on tubes?, Rob Atkinson, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Rob Atkinson, 2016/12/04
  • Message not available
    • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Chas Hamilton, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Roger D Johnson, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Mike Waters, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/05
    • Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/05
  • Message not available
    • Message not available
    • Re: [Amps] Stock up on tubes?, Hardy Landskov, 2016/12/04
• Re: [Amps] Stock up on tubes?, Kim Elmore, 2016/12/04
  • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/04
    • Re: [Amps] Stock up on tubes?, qrv@kd4e.com, 2016/12/04
    • Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/05
• Re: [Amps] Stock up on tubes?, Rob Atkinson, 2016/12/04
  • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/04
• Re: [Amps] Stock up on tubes?, Rob Atkinson, 2016/12/04
• [Amps] Stock up on tubes?, Jim Thomson, 2016/12/05
  • Re: [Amps] Stock up on tubes?, Ken Durand, 2016/12/06
    • Re: [Amps] Stock up on tubes?, Paul Christensen, 2016/12/06
    • Re: [Amps] Stock up on tubes?, Larry Dighera, 2016/12/07
• [Amps] Stock up on tubes?, Jim Thomson, 2016/12/06
  • Re: [Amps] Stock up on tubes?, Bill Turner, 2016/12/06
• [Amps] Stock up on tubes?, Jim Thomson, 2016/12/06
• Re: [Amps] Stock up on tubes?, Catherine James, 2016/12/06
  • Re: [Amps] Stock up on tubes?, Richard Solomon, 2016/12/06
    • Re: [Amps] Stock up on tubes?, w8hw, 2016/12/06
    • Re: [Amps] Stock up on tubes?, Al Kozakiewicz, 2016/12/06
  • Message not available
    • Re: [Amps] Stock up on tubes?, Peter Frenning [OZ1PIF], 2016/12/06
• [Amps] Stock up on tubes?, Jim Thomson, 2016/12/07

Re: [Amps] The cost of amplifiers, radios, Catherine James, 2016/12/03

• Re: [Amps] The cost of amplifiers, radios, Bill Turner, 2016/12/03
  • Re: [Amps] The cost of amplifiers, radios, Ken K6MR, 2016/12/03
    • Re: [Amps] The cost of amplifiers, radios, Jeff AC0C, 2016/12/03
    • Re: [Amps] The cost of amplifiers, radios and Ph.D.s, Charles H, 2016/12/04
    • Re: [Amps] The cost of amplifiers, radios, Rob Atkinson, 2016/12/04
  • Re: [Amps] The cost of amplifiers, radios, Catherine James, 2016/12/03
    • Re: [Amps] The cost of amplifiers, radios, David Gow, 2016/12/04
    • Re: [Amps] The cost of amplifiers, radios, Bill Turner, 2016/12/04
    • Re: [Amps] The cost of amplifiers, radios, Catherine James, 2016/12/04
    • Re: [Amps] The cost of amplifiers, radios, Mark Bitterlich, 2016/12/04
• [Amps] The cost of amplifiers, radios, Jim Thomson, 2016/12/06
  • Re: [Amps] The cost of amplifiers, radios, Paul Baldock, 2016/12/06
• [Amps] The cost of amplifiers, radios, Jim Thomson, 2016/12/06
  • Re: [Amps] The cost of amplifiers, radios, Paul Baldock, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Richard Solomon, 2016/12/06
    • Message not available
    • Re: [Amps] The cost of amplifiers, radios, Paul Baldock, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Richard Solomon, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Charlie Young, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Alek Petkovic, 2016/12/06
    • Message not available
    • Re: [Amps] The cost of amplifiers, radios, Paul Baldock, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Jeff AC0C, 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Roger (K8RI), 2016/12/06
    • Re: [Amps] The cost of amplifiers, radios, Roger (K8RI), 2016/12/06
• Re: [Amps] The cost of amplifiers, radios, Catherine James, 2016/12/06
• [Amps] The cost of amplifiers, radios, Steve Bookout, 2016/12/09

[Amps] Alpha 9500 vs. Acom 2000A questions, Dick via Amps, 2016/12/03

• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Gary K9GS, 2016/12/03
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Baldock, 2016/12/03
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Bill Turner, 2016/12/04
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Val, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Christensen, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Christensen, 2016/12/04
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Dick Green, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, MU 4CX250B, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Bill Turner, 2016/12/04
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Dick Green, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Bill Turner, 2016/12/04
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Dick Green, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, MU 4CX250B, 2016/12/04
    • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Dick Green, 2016/12/04
• Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Baldock, 2016/12/04
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Charles H, 2016/12/04
    • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Bill Turner, 2016/12/04
• [Amps] Alpha 9500 vs. Acom 2000A questions, Jim Thomson, 2016/12/06
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Christensen, 2016/12/06
    • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, MU 4CX250B, 2016/12/06
• [Amps] Alpha 9500 vs. Acom 2000A questions, Jim Thomson, 2016/12/06
  • Re: [Amps] Alpha 9500 vs. Acom 2000A questions, Paul Christensen, 2016/12/06

[Amps] Not just you... The cost of amplifiers, Catherine James, 2016/12/03

• Re: [Amps] Not just you... The cost of amplifiers, w8hw, 2016/12/03
• Re: [Amps] Not just you... The cost of amplifiers, Jim Brown, 2016/12/04
  • Re: [Amps] Not just you... The cost of amplifiers, Bill Turner, 2016/12/04
    • Re: [Amps] Not just you... The cost of amplifiers, MU 4CX250B, 2016/12/04
• Re: [Amps] Not just you... The cost of amplifiers, Bryan Swadener via Amps, 2016/12/03
  • [Amps] The cost of amplifiers, radios, Charles H, 2016/12/03

[Amps] Conventional" current flow, Jim Thomson, 2016/12/02

• Re: [Amps] Conventional" current flow, Richard Solomon, 2016/12/02
  • Re: [Amps] Conventional" current flow, Jim Garland, 2016/12/02
  • Re: [Amps] Conventional" current flow, Rob Atkinson, 2016/12/03
    • Re: [Amps] Conventional" current flow, Jerry O. Stern, 2016/12/03

Re: [Amps] "Conventional" current flow, Bill Ashby, 2016/12/01

• Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/01
• Message not available
  • Message not available
    • [Amps] FW: "Conventional" current flow, Fuqua, Bill L, 2016/12/02
• Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/02
  • Re: [Amps] "Conventional" current flow, Al Kozakiewicz, 2016/12/02
    • Re: [Amps] "Conventional" current flow, Mike Waters, 2016/12/02
    • Re: [Amps] "Conventional" current flow, w8hw, 2016/12/02
    • Re: [Amps] "Conventional" current flow, Rob Atkinson, 2016/12/02
    • Re: [Amps] "Conventional" current flow, K9FFK, 2016/12/02
    • Re: [Amps] "Conventional" current flow, Jim Garland, 2016/12/02
    • Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/02
    • Re: [Amps] "Conventional" current flow, K9FFK, 2016/12/02
    • Message not available
    • Re: [Amps] "Conventional" current flow, Mike Waters, 2016/12/03
    • Re: [Amps] "Conventional" current flow, Robert Carroll, 2016/12/03
    • Re: [Amps] "Conventional" current flow, Al Kozakiewicz, 2016/12/02
    • Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/02
• Re: [Amps] "Conventional" current flow, Manfred Mornhinweg, 2016/12/03
• Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/08
  • Re: [Amps] "Conventional" current flow, donroden, 2016/12/08
  • Re: [Amps] "Conventional" current flow, Jim Garland, 2016/12/08
    • Re: [Amps] "Conventional" current flow, Michael Clarson, 2016/12/09
    • Re: [Amps] "Conventional" current flow, Ron Youvan, 2016/12/09
    • Re: [Amps] "Conventional" current flow, Catherine James, 2016/12/09
    • Re: [Amps] "Conventional" current flow, donroden, 2016/12/09
    • Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/09
    • Re: [Amps] "Conventional" current flow, Michael Clarson, 2016/12/09
    • Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/09
  • Re: [Amps] "Conventional" current flow, Vic Rosenthal, 2016/12/09
• Re: [Amps] "Conventional" current flow, Rob Atkinson, 2016/12/09
  • Re: [Amps] "Conventional" current flow, Bill Turner, 2016/12/09
• Re: [Amps] "Conventional" current flow, Catherine James, 2016/12/09

[Amps] More thots on ham amps, Jim Thomson, 2016/12/01

• Re: [Amps] More thots on ham amps, Bill Turner, 2016/12/01
• [Amps] More thots on ham amps, Jim Thomson, 2016/12/02