Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] Drake L4B to 6 Meters Help

from [Michelle] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] Drake L4B to 6 Meters Help
From: "Michelle" <michelle_melt@windstream.net>
Date: Mon, 12 Dec 2016 11:56:02 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com> 



You are not missing anything.  An L4B converted to 6M will be something
around 50% efficient because the components used have not been optimized for
that band.  If your 750W output is key down you will realize over 1KW PEP
and that is good on 6M.

Bill VE3NH
Bill, What's left to optimize? only stock Drake part is the bifilar choke, everything else is designed for 6 meters. 
The Raytrack Horizon 6L amp (similar to L4B) is rated at 2kw pep.
Michelle 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] MOSFET amp filtering - was: auto-tune, Manfred Mornhinweg
Next by Date:  [Amps] Drake L4B to 6 Meters Help, Jim Thomson
Previous by Thread:  Re: [Amps] Drake L4B to 6 Meters Help, Peter Frenning [OZ1PIF]
Next by Thread:  [Amps] Drake L4B to 6 Meters Help, Michelle
Indexes:  [Date] [Thread] [Top] [All Lists]