[Amps] Linear Amplifiers, EP Swynar, 2008/11/30

• Re: [Amps] Linear Amplifiers, Dave, 2008/11/30
  • Re: [Amps] Linear Amplifiers, kq6i, 2008/11/30
• Re: [Amps] Linear Amplifiers, DAVE WHITE, 2008/11/30

[Amps] Nice looking 1.8 MHz amplifier, John Lyles, 2008/11/30

• Re: [Amps] Nice looking 1.8 MHz amplifier, k7rdx, 2008/11/30
  • Re: [Amps] Nice looking 1.8 MHz amplifier, Bob Maser, 2008/11/30

[Amps] how to measure tank, Lynn Osterbur, 2008/11/29

• Re: [Amps] how to measure tank, Rick Stealey, 2008/11/30
• Re: [Amps] how to measure tank, George Badger, 2008/11/29
  • Re: [Amps] how to measure tank, DAVE WHITE, 2008/11/30
  • Re: [Amps] how to measure tank, Jerry K, 2008/11/30
    • Re: [Amps] how to measure tank, Robert Groh, 2008/11/30
    • Re: [Amps] how to measure tank, DAVE WHITE, 2008/11/30
• Re: [Amps] how to measure tank, Gudguyham, 2008/11/30

[Amps] Chinese 3-500 tubes what manufacturer?, Gary Schafer, 2008/11/29

• Re: [Amps] Chinese 3-500 tubes what manufacturer?, Rob Atkinson, 2008/11/29

[Amps] 3-500Z, roller, 2008/11/29

• Re: [Amps] 3-500Z, Chris Pedder, 2008/11/29
  • Re: [Amps] 3-500Z, Jan Erik Holm, 2008/11/30

[Amps] Variac FS, Marv Gonsior, 2008/11/29

• [Amps] Variac FS, Marv Gonsior, 2008/11/29

[Amps] Pi-Net tank bandswitch question, Charlie Ocker, 2008/11/28

• Re: [Amps] Pi-Net tank bandswitch question, Vic K2VCO, 2008/11/28
• Re: [Amps] Pi-Net tank bandswitch question, Radio WC6W, 2008/11/29

[Amps] Ameritron AL-1200 problem on 160 meters, k8dio, 2008/11/26

• Re: [Amps] Ameritron AL-1200 problem on 160 meters, Rick Stealey, 2008/11/26
• Re: [Amps] Ameritron AL-1200 problem on 160 meters, W7RY, 2008/11/26
  • Re: [Amps] Ameritron AL-1200 problem on 160 meters, Rick Stealey, 2008/11/26
  • Re: [Amps] Ameritron AL-1200 problem on 160 meters, Rick Stealey, 2008/11/27

[Amps] Henry Repair, W7RY, 2008/11/22

• Re: [Amps] Henry Repair, W7RY, 2008/11/22

[Amps] QSK connections using FT-1000D driving Alpha 87A, David J Windisch, 2008/11/22

• Re: [Amps] QSK connections using FT-1000D driving Alpha 87A, Dick Green WC1M, 2008/11/23
  • [Amps] Help re problems with AEA QSK-1 high speed switching relay box, Fern Rivard, 2008/11/23
    • Re: [Amps] Help re problems with AEA QSK-1 high speed switching relaybox, David J Windisch, 2008/11/24

[Amps] High SWR, Ken-W9KB, 2008/11/21

• Re: [Amps] High SWR, Vic K2VCO, 2008/11/21
• [Amps] High SWR, Ken-W9KB, 2008/11/21
  • Re: [Amps] High SWR, Robert Morris, 2008/11/21
• Re: [Amps] High SWR, Paul Young, 2008/11/21
• Re: [Amps] High SWR, Ken-W9KB, 2008/11/21

Re: [Amps] Subject: SB-221 parasitic supression upgrade kit, Greg Chartrand, 2008/11/20

• Re: [Amps] Subject: SB-221 parasitic supression upgrade kit, Rick Stealey, 2008/11/21
  • Re: [Amps] Subject: SB-221 parasitic supression upgrade kit, Gary Hinson, 2008/11/21
  • Message not available
    • Message not available
    • Message not available
    • [Amps] Sequencing relays, Rick Stealey, 2008/11/22
    • Re: [Amps] Sequencing relays, W7RY, 2008/11/22
    • Re: [Amps] Sequencing relays, W7RY, 2008/11/22
• Re: [Amps] Subject: SB-221 parasitic supression upgrade kit, Gudguyham, 2008/11/21

[Amps] SB-221 parasitic supression upgrade kit, ka3qlf, 2008/11/20

• Re: [Amps] SB-221 parasitic supression upgrade kit, Rick Stealey, 2008/11/20
  • Re: [Amps] SB-221 parasitic supression upgrade kit, Vic K2VCO, 2008/11/20
    • Re: [Amps] SB-221 parasitic supression upgrade kit, Carl, 2008/11/20

[Amps] Strange Loading Issue, Lee Buller, 2008/11/20

• Re: [Amps] Strange Loading Issue, Carl, 2008/11/20
  • Re: [Amps] Strange Loading Issue, gudguyham, 2008/11/20
    • Re: [Amps] Strange Loading Issue, Carl, 2008/11/20
• Re: [Amps] Strange Loading Issue, Gudguyham, 2008/11/20

[Amps] Wanted Henry 3K Premier Manual or Schematic, W7RY, 2008/11/19

• [Amps] Wanted Henry 3K Premier Manual or Schematic, W7RY, 2008/11/19
  • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, DAVE WHITE, 2008/11/20
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, DAVE WHITE, 2008/11/20
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, W7RY, 2008/11/20
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, DAVE WHITE, 2008/11/20
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, sccook1, 2008/11/20
• Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, W7RY, 2008/11/20
  • Message not available
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, W7RY, 2008/11/20
    • Re: [Amps] Wanted Henry 3K Premier Manual or Schematic, Phil Clements, 2008/11/21

[Amps] 3 phase transformers on single phase - advice pls?, DAVE WHITE, 2008/11/17

• Re: [Amps] 3 phase transformers on single phase - advice pls?, Carl, 2008/11/17
  • Re: [Amps] 3 phase transformers on single phase - advice pls?, Paul Kraemer, 2008/11/17
    • Re: [Amps] 3 phase transformers on single phase - advice pls?, Carl, 2008/11/17
• Re: [Amps] 3 phase transformers on single phase - advice pls?, Keith E. Spainhour, 2008/11/17
  • Re: [Amps] 3 phase transformers on single phase - advice pls?, Carl, 2008/11/17
• Re: [Amps] 3 phase transformers on single phase - advice pls?, Jim Smith, 2008/11/19
  • Re: [Amps] 3 phase transformers on single phase - advice pls?, Jim Smith, 2008/11/19
  • Re: [Amps] 3 phase transformers on single phase - advice pls?, Phil Clements, 2008/11/20

[Amps] Active Antenna Tuners, Pete Smith, 2008/11/17

• Re: [Amps] Active Antenna Tuners, Carl, 2008/11/17

[Amps] Looking for a Amp Supply LK500C schematic?, aparrisjr user, 2008/11/17

• Re: [Amps] Looking for a Amp Supply LK500C schematic?, W7RY, 2008/11/17

[Amps] Strange relay problem Alpha 76, Carl, 2008/11/16

• Re: [Amps] Strange relay problem Alpha 76, Radio WC6W, 2008/11/17

[Amps] Far East 3-500Z sources, John Lyles, 2008/11/15

• Re: [Amps] Far East 3-500Z sources, W4AWM, 2008/11/15

[Amps] The quality of Chinese 811A and 572B, Hsu, 2008/11/13

• Re: [Amps] The quality of Chinese 811A and 572B, DAVE WHITE, 2008/11/14
  • Re: [Amps] The quality of Chinese 811A and 572B, Chuck Lewis, 2008/11/14
    • Re: [Amps] The quality of Chinese 811A and 572B, Kees - pa7two, 2008/11/14
• Re: [Amps] [ham_amplifiers] The quality of Chinese 811A and 572B, Carl, 2008/11/14

[Amps] L4B Keying, N7KA, 2008/11/13

• Re: [Amps] L4B Keying, Joe Subich, W4TV, 2008/11/13
• Re: [Amps] L4B keying, Roy, 2008/11/13

[Amps] Core wrapping, TMorton, 2008/11/13

• Re: [Amps] Core wrapping, Carl, 2008/11/13

[Amps] Core wrapping?, TMorton, 2008/11/12

• Re: [Amps] Core wrapping?, W7RY, 2008/11/12
• Re: [Amps] Core wrapping?, alexeban, 2008/11/16
  • Re: [Amps] Core wrapping?, Bob Maser, 2008/11/16
  • Re: [Amps] Core wrapping?, Carl, 2008/11/16
• Re: [Amps] Core wrapping?, Sugiyama, 2008/11/13
• Re: [Amps] Core wrapping?, Colin Lamb, 2008/11/16

[Amps] SB-200/572B issues, me, 2008/11/11

• Re: [Amps] SB-200/572B issues, ANTHONY JAPHA, 2008/11/12
  • Re: [Amps] SB-200/572B issues, cemilton, 2008/11/12
    • Re: [Amps] SB-200/572B issues, Carl, 2008/11/12
    • Re: [Amps] SB-200/572B issues, cemilton, 2008/11/12
  • Re: [Amps] SB-200/572B issues, Glen Zook, 2008/11/12
• Re: [Amps] SB-200/572B issues, ANTHONY JAPHA, 2008/11/12
• [Amps] SB-200/572B issues, Zielinski, Laurence, 2008/11/12
  • Re: [Amps] SB-200/572B issues, Carl, 2008/11/12
  • Re: [Amps] SB-200/572B issues, W7RY, 2008/11/12
• Re: [Amps] SB-200/572B issues, ANTHONY JAPHA, 2008/11/12

[Amps] help with corona discharge, Steve Hanlon, 2008/11/11

• Re: [Amps] help with corona discharge, Carl, 2008/11/11
• Re: [Amps] help with corona discharge, k7fm, 2008/11/12
• Re: [Amps] help with corona discharge, Steven Hanlon, 2008/11/12
  • Re: [Amps] help with corona discharge, Mike Schatzberg, 2008/11/12
    • Re: [Amps] help with corona discharge, k8mlm, 2008/11/12
    • Re: [Amps] help with corona discharge, Pat Barthelow, 2008/11/12
    • Re: [Amps] help with corona discharge, David H Craig, 2008/11/12
    • Re: [Amps] help with corona discharge, Gary Smith, 2008/11/12
    • Re: [Amps] help with corona discharge, Carl, 2008/11/12
    • Re: [Amps] help with corona discharge, Gary Smith, 2008/11/12
    • Re: [Amps] help with corona discharge, Carl, 2008/11/12
    • Re: [Amps] help with corona discharge, Paul Kraemer, 2008/11/12
    • Re: [Amps] help with corona discharge, Roger (K8RI), 2008/11/12

Re: [Amps] SB-220 saga continues - ARB-704 experts?, Alfred Frugoli, 2008/11/10

• [Amps] Fwd: SB-220 saga continues - ARB-704 experts?, Alfred Frugoli, 2008/11/09

[Amps] What is wrong with my Alpha?, Bill and Cindy, 2008/11/10

• Re: [Amps] What is wrong with my Alpha?, Vic K2VCO, 2008/11/10
• Re: [Amps] What is wrong with my Alpha?, Chris Codella, W2PA, 2008/11/10
• Re: [Amps] What is wrong with my Alpha?, Gudguyham, 2008/11/10

[Amps] PROBLEM WITH HUM, Bob Gibson, 2008/11/10

• Re: [Amps] PROBLEM WITH HUM, Jim Brown, 2008/11/10
• Re: [Amps] PROBLEM WITH HUM, k7rdx, 2008/11/10
  • Re: [Amps] PROBLEM WITH HUM, Jim Brown, 2008/11/10
    • Re: [Amps] PROBLEM WITH HUM, k7rdx, 2008/11/10
• Re: [Amps] PROBLEM WITH HUM, Norman Hockler, 2008/11/10
• [Amps] problem with hum, Bob Gibson, 2008/11/10
• Re: [Amps] problem with hum, Gudguyham, 2008/11/10
• Re: [Amps] PROBLEM WITH HUM, Gudguyham, 2008/11/10

[Amps] QRO Heat management, Rob Atkinson, 2008/11/10

• Re: [Amps] QRO Heat management, David Cutter, 2008/11/10
• Re: [Amps] QRO Heat management, Carl, 2008/11/10
  • Re: [Amps] QRO Heat management, Roger (K8RI), 2008/11/10
    • Re: [Amps] QRO Heat management, Carl, 2008/11/10
    • Re: [Amps] QRO Heat management, Roger (K8RI), 2008/11/10
    • Re: [Amps] QRO Heat management, Carl, 2008/11/10

[Amps] QRO Heat management, Pat Barthelow, 2008/11/09

• Re: [Amps] QRO Heat management, Carl, 2008/11/09

[Amps] SB-220 saga continues, Alfred Frugoli, 2008/11/08

• Re: [Amps] SB-220 saga continues, Carl, 2008/11/08
• Re: [Amps] SB-220 saga continues, W7RY, 2008/11/08
  • Re: [Amps] SB-220 saga continues, Mike, 2008/11/08
  • Re: [Amps] SB-220 saga continues, Gary Smith, 2008/11/09
• Re: [Amps] SB-220 saga continues, Roger (K8RI), 2008/11/08
• Re: [Amps] SB-220 saga continues, Roger (K8RI), 2008/11/08
  • Re: [Amps] SB-220 saga continues, Joe Subich, W4TV, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Carl, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Joe Subich, W4TV, 2008/11/09
    • Message not available
    • [Amps] SB-220 saga continues, Don Moman VE6JY, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Rex Lint, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Carl, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Pete Smith, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Rex Lint, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Gary Smith, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Larry K4AB, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Bob Maser, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Pete Smith, 2008/11/09
    • Re: [Amps] SB-220 saga continues (correction), Pete Smith, 2008/11/09
    • Re: [Amps] SB-220 saga continues, Pete Smith, 2008/11/10
    • Re: [Amps] SB-220 saga continues, Carl, 2008/11/10
• Re: [Amps] SB-220 saga continues, Alfred Frugoli, 2008/11/10

[Amps] SELL: OEM Drake L4B Axial Power Supply Filter Capacitors, w2cqm@juno.com, 2008/11/08

• Re: [Amps] SELL: OEM Drake L4B Axial Power Supply Filter Capacitors, Carl, 2008/11/08
  • Re: [Amps] SELL: OEM Drake L4B Axial Power Supply Filter Capacitors, Moe Fretz, 2008/11/09
    • Re: [Amps] SELL: OEM Drake L4B Axial Power Supply Filter Capacitors, Carl, 2008/11/09

[Amps] Eimac Industrial Tube Question 3cx400a7, Karl Brandt, 2008/11/07

• Re: [Amps] Eimac Industrial Tube Question 3cx400a7, George Badger, 2008/11/07

[Amps] Intro and a query - which amp?, Steve Hanlon, 2008/11/07

• Re: [Amps] Intro and a query - which amp?, Tim Duffy K3LR, 2008/11/07
  • Re: [Amps] Intro and a query - which amp?, George Fremin III, 2008/11/07
    • Re: [Amps] Intro and a query - which amp?, Carl, 2008/11/07
• Re: [Amps] Intro and a query - which amp?, Dave Weiss, 2008/11/07
  • Re: [Amps] Intro and a query - which amp?, Dave Weiss, 2008/11/07
• Re: [Amps] Intro and a query - which amp?, Carl, 2008/11/07
• Re: [Amps] Intro and a query - which amp?, Gary McAdams, 2008/11/07
• [Amps] HA-10 Warrior question, vhfplus, 2008/11/07
• [Amps] Intro and a query - which amp?, kg7hf, 2008/11/07

[Amps] Henry 2KD-5, Robert Perdue, 2008/11/06

• Re: [Amps] Henry 2KD-5, David J Windisch, 2008/11/07

[Amps] OT: 4 square query, Carl, 2008/11/05

• Re: [Amps] OT: 4 square query, David Cutter, 2008/11/05
  • Re: [Amps] OT: 4 square query, Carl, 2008/11/06
    • Re: [Amps] OT: 4 square query, Rex Lint, 2008/11/06
    • Re: [Amps] OT: 4 square query, Carl, 2008/11/06

[Amps] SB-200 on Six Meters, Craig Anderson Ext 1365, 2008/11/05

• Re: [Amps] SB-200 on Six Meters, Carl, 2008/11/05
  • Re: [Amps] SB-200 on Six Meters, k7rdx, 2008/11/05
• Re: [Amps] SB-200 on Six Meters, Gudguyham, 2008/11/05
  • Re: [Amps] SB-200 on Six Meters, Carl, 2008/11/05
  • Re: [Amps] SB-200 on Six Meters, Doug Renwick, 2008/11/05

Re: [Amps] HT41, n1wr, 2008/11/04

• Re: [Amps] HT41, Peter Voelpel, 2008/11/04

[Amps] New here, Laurens Sierdsma, 2008/11/03

• Re: [Amps] New here, Rex Lint, 2008/11/04

[Amps] Al 1200 Ameritron, Pat Lees, 2008/11/02

• Re: [Amps] Al 1200 Ameritron, Carl, 2008/11/02

[Amps] coax length between transceiver and amplifier, STEPHEN L SALA, 2008/11/02

• Re: [Amps] coax length between transceiver and amplifier, kenw2dtc, 2008/11/02
  • Re: [Amps] coax length between transceiver and amplifier, Carl, 2008/11/02
    • Re: [Amps] coax length between transceiver and amplifier, Jim Brown, 2008/11/03
    • Re: [Amps] coax length between transceiver and amplifier, Carl, 2008/11/03
    • Re: [Amps] coax length between transceiver and amplifier, Roger (K8RI), 2008/11/03

Re: [Amps] Heathkit Warrior High Plate Curent, Eddie Bradshaw KJ4R, 2008/11/02

• Re: [Amps] Heathkit Warrior High Plate Curent, Glen Zook, 2008/11/02

[Amps] SB-1000 band swtich replace needed...., Fernando González, 2008/11/01

• Re: [Amps] SB-1000 band swtich replace needed...., W7RY, 2008/11/01

[Amps] SB-220 Exciter Foldback, pmihnovets, 2008/11/01

• Re: [Amps] SB-220 Exciter Foldback, Carl, 2008/11/01