Amps
[Top] [All Lists]

Re: [Amps] SB-200 on Six Meters

To: "Craig Anderson Ext 1365" <Craig.Anderson@saintpaul.edu>, <amps@contesting.com>
Subject: Re: [Amps] SB-200 on Six Meters
From: "Carl" <km1h@jeremy.mv.com>
Date: Wed, 5 Nov 2008 14:04:27 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Ive yet to see any magazine conversion worth a damn. Unstable, poor 
efficiency, no clue how to design at VHF, etc.

That is why I developed my own procedure and have been converting them 
for customers for decades.

Carl
KM1H
----- Original Message ----- 
From: "Craig Anderson Ext 1365" <Craig.Anderson@saintpaul.edu>
To: <amps@contesting.com>
Sent: Wednesday, November 05, 2008 12:16 PM
Subject: [Amps] SB-200 on Six Meters


>I have an SB-200 that I would like to convert to 6M using a dedicated
> tank circuit not one of those conversions that simply change a few
> values on 10M meter position.  I have the article from the Nov 1971
> issue of Ham Radio magazine describing a dedicated conversion for the
> SB-200 using an all new 6M tank circuit.  Has anyone done this
> conversion?
>
> Craig W9CLA
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>