[Amps] SB-1000 meter switch, Jim Monahan, 2004/10/31

• Re: [Amps] SB-1000 meter switch, Will Matney, 2004/10/31
  • Message not available
    • Re: [Amps] SB-1000 meter switch, Will Matney, 2004/10/31
    • Message not available
    • Re: [Amps] SB-1000 meter switch, Will Matney, 2004/10/31

[Amps] RE: RangeMaster E-Bay Sale, Rob Atkinson, K5UJ, 2004/10/30

• Re: [Amps] RE: RangeMaster E-Bay Sale, ToddRoberts2001, 2004/10/30

[Amps] pa-pics wanted, ON5KM, 2004/10/30

• Re: [Amps] pa-pics wanted, kenw2dtc, 2004/10/30

[Amps] A thought about regulating fil voltage..., Roy Koeppe, 2004/10/29

• Re: [Amps] A thought about regulating fil voltage..., Will Matney, 2004/10/29

[Amps] Tetrodes working as triodes, GGLL, 2004/10/29

• Re: [Amps] Tetrodes working as triodes, Peter Frenning, OZ1PIF, 2004/10/29

[Amps] Urgent help needed, pse. My 91b is scared of contests., Robert Thain, 2004/10/29

• Re: [Amps] Urgent help needed, pse. My 91b is scared of contests., R . Measures, 2004/10/29
  • Re: [Amps] Urgent help needed, pse. My 91b is scared of contests., Dudley Hurry, 2004/10/29
• [Amps] Urgent help needed, pse. My 91b is scared of contests., Robert Thain, 2004/10/29

[Amps] Ebay, dittybop, 2004/10/28

• Re: [Amps] Ebay, Jan Erik Holm, 2004/10/28
• Re: [Amps] Ebay, Bill Turner, 2004/10/29

[Amps] ebay selling, Rob Atkinson, K5UJ, 2004/10/28

• Re: [Amps] ebay selling, Will Matney, 2004/10/28
• Re: [Amps] ebay selling, Joe Isabella, 2004/10/28
• Re: [Amps] ebay selling, Kim Elmore, 2004/10/28
• Re: [Amps] ebay selling, Harold B. Mandel, 2004/10/30

[Amps] Vacuum or Air?, StephenTetorka, 2004/10/28

• Re: [Amps] Vacuum or Air?, Vic Rosenthal, 2004/10/28
  • Re: [Amps] Vacuum or Air?, Bill Turner, 2004/10/28

[Amps] QB3-300 Amplifier, Alberto, 2004/10/28

• Re: [Amps] QB3-300 Amplifier, Peter Frenning, OZ1PIF, 2004/10/28
  • Re: [Amps] QB3-300 Amplifier, Alek Petkovic, 2004/10/28
• Re: [Amps] QB3-300 Amplifier, R . Measures, 2004/10/28
  • Re: [Amps] QB3-300 Amplifier, Alberto, 2004/10/29
    • Re: [Amps] QB3-300 Amplifier, Peter Frenning, OZ1PIF, 2004/10/29
• Re: [Amps] QB3-300 Amplifier, DEHAYS Dominique, 2004/10/29

[Amps] Amazing ebay auction., Will Matney, 2004/10/28

• Re: [Amps] Amazing ebay auction., Tony King, 2004/10/28
• RE: [Amps] Amazing ebay auction., ad5gb, 2004/10/28
  • Re: [Amps] Amazing ebay auction., Will Matney, 2004/10/28
  • Re: [Amps] Amazing ebay auction., lncarman, 2004/10/28

[Amps] SELL: HV Plate Chokes, w2cqm, 2004/10/27

• Re: [Amps] SELL: HV Plate Chokes, Vic Rosenthal, 2004/10/27

[Amps] QB4/1100 linear amp circuit, Owen Wesstrom, 2004/10/27

• [Amps] 3CX1000A7 amp., Osten B Magnusson, 2004/10/27
• Re: [Amps] QB4/1100 linear amp circuit, Peter Frenning, OZ1PIF, 2004/10/27

[Amps] RE: Amps, Who Did It? English version available???, Dennis12Amplify, 2004/10/27

• RE: [Amps] RE: Amps, Who Did It? English version available???, Adam Farson, 2004/10/27

[Amps] filament voltage question, TexasRF, 2004/10/27

• Re: [Amps] filament voltage question, R . Measures, 2004/10/27
• Re: [Amps] filament voltage question, Jim Smith, 2004/10/29
  • Re: [Amps] filament voltage question, Tony King, 2004/10/29
    • Re: [Amps] filament voltage question, R . Measures, 2004/10/29
    • Re: [Amps] filament voltage question, Tony King, 2004/10/29
• Re: [Amps] filament voltage question, Colin Lamb, 2004/10/29
• Re: [Amps] filament voltage question, Radio WC6W, 2004/10/29

[Amps] Who did it ?, hermans, 2004/10/27

• Re: [Amps] Who did it ?, Traian, 2004/10/27
• Re: [Amps] Who did it ?, Jan Erik Holm, 2004/10/27
  • Re: [Amps] Who did it ?, Jason Buchanan, 2004/10/28

[Amps] toroid filament choke?, Tony King, 2004/10/26

• Re: [Amps] toroid filament choke?, Tony King, 2004/10/28
• Re: [Amps] toroid filament choke?, Will Matney, 2004/10/27
  • Re: [Amps] toroid filament choke?, R . Measures, 2004/10/27
  • Re: [Amps] toroid filament choke?, k7fm, 2004/10/27
    • Re: [Amps] toroid filament choke?, Tony King, 2004/10/27
    • Re: [Amps] toroid filament choke?, R . Measures, 2004/10/27
    • Re: [Amps] toroid filament choke?, Will Matney, 2004/10/27
    • Re: [Amps] toroid filament choke?, R . Measures, 2004/10/27
    • Re: [Amps] toroid filament choke?, k7fm, 2004/10/27
    • Re: [Amps] toroid filament choke?, Will Matney, 2004/10/27
    • Re: [Amps] toroid filament choke?, k7fm, 2004/10/27
    • Re: [Amps] toroid filament choke?, R . Measures, 2004/10/28
• Re: [Amps] toroid filament choke?, TexasRF, 2004/10/27
  • Re: [Amps] toroid filament choke?, Will Matney, 2004/10/27

[Amps] torroid filament choke?, Tony King, 2004/10/26

• Re: [Amps] torroid filament choke?, RICHARD GEORGE, 2004/10/27

[Amps] GU43B amp for 2m ?, Traian, 2004/10/26

• Re: [Amps] GU43B amp for 2m ?, Will Matney, 2004/10/26
• RE: [Amps] GU43B amp for 2m ?, G0RUZ Conrad, 2004/10/26
  • Re: [Amps] GU43B amp for 2m ?, Steve Thompson, 2004/10/27
  • Re: [Amps] GU43B amp for 2m ?, Traian, 2004/10/27

[Amps] GU84-B ratings, Barry Kirkwood, 2004/10/25

• Re: [Amps] GU84-B ratings, Will Matney, 2004/10/25

[Amps] Tentec TITAN III vs ALPHA99, ea1dgz, 2004/10/25

• Re: [Amps] Tentec TITAN III vs ALPHA99, Will Matney, 2004/10/25
  • Re: [Amps] Tentec TITAN III vs ALPHA99, Jason Buchanan, 2004/10/25
• Re: [Amps] Tentec TITAN III vs ALPHA99, W0UN -- John Brosnahan, 2004/10/25
• Re: [Amps] Tentec TITAN III vs ALPHA99, n4gi, 2004/10/25
  • Re: [Amps] Tentec TITAN III vs ALPHA99, Ed Briggs, 2004/10/25
• Re: [Amps] Tentec TITAN III vs ALPHA99, Colin Lamb, 2004/10/25

RE: [BULK] - [Amps] Semtech?, Steve Katz, 2004/10/25

• RE: [BULK] - [Amps] Semtech?, StephenTetorka, 2004/10/25
• RE: [BULK] - [Amps] Semtech?, Steve Katz, 2004/10/25

[Amps] Semtech?, StephenTetorka, 2004/10/25

• Re: [Amps] Semtech?, Web Williams, 2004/10/25
  • Re: [Amps] Semtech?, R . Measures, 2004/10/25
    • Re: [Amps] Semtech?, Web Williams, 2004/10/25
    • Re: [Amps] Semtech?, R . Measures, 2004/10/25
• Re: [Amps] Semtech?, W0UN -- John Brosnahan, 2004/10/25

[Amps] AIR-DUX coil info wanted, Henry Turner, 2004/10/24

• Re: [Amps] AIR-DUX coil info wanted, Karl-Arne Markström, 2004/10/25
• Fw: [Amps] AIR-DUX coil info wanted, Will Matney, 2004/10/24

[Amps] re: baking out tubes, carl seyersdahl, 2004/10/24

• Re: [Amps] re: baking out tubes, Bill Fuqua, 2004/10/24
  • Re: [Amps] re: baking out tubes, Traian, 2004/10/25
    • Re: [Amps] re: baking out tubes, Steve Thompson, 2004/10/26
    • Re: [Amps] re: baking out tubes, R . Measures, 2004/10/26
    • Re: [Amps] re: baking out tubes, Bill Fuqua, 2004/10/26
    • Re: [Amps] re: baking out tubes, Steven Grant, W4IIV, 2004/10/26
    • Re: [Amps] re: baking out tubes, R . Measures, 2004/10/26
    • Re: [Amps] re: baking out tubes, Steve Thompson, 2004/10/27
    • Re: [Amps] re: baking out tubes, R . Measures, 2004/10/27
    • Re: [Amps] re: baking out tubes, Traian, 2004/10/26

[Amps] Peak power meter, Will Matney, 2004/10/23

• Re: [Amps] Peak power meter, Bob Bruno - K2KI, 2004/10/23
  • Re: [Amps] Peak power meter, RICHARD GEORGE, 2004/10/23
    • Re: [Amps] Peak power meter, Will Matney, 2004/10/23
• Re: [Amps] Peak power meter, Will Matney, 2004/10/23

[Amps] chimney material suggestion GI35b, Manuel R. Alonso / KC4MNE, 2004/10/22

• Re: [Amps] chimney material suggestion GI35b, Will Matney, 2004/10/22
• Re: [Amps] chimney material suggestion GI35b, Tony King, 2004/10/22
• [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, jeff millar, 2004/10/23
  • Re: [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, Tomm Aldridge, 2004/10/23
    • Re: [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, Tomm Aldridge, 2004/10/23
    • Re: [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, R . Measures, 2004/10/23
    • Re: [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, K7RDX, 2004/10/23
    • Re: [Amps] High Temp silcone rubber sheet,was chimney material suggestion GI35b, Will Matney, 2004/10/23

[Amps] a question on non-linearity, CLIVE COLLINS, 2004/10/21

• Re: [Amps] a question on non-linearity, Roger D Johnson, 2004/10/21
• Re: [Amps] a question on non-linearity, R . Measures, 2004/10/21
• Re: [Amps] a question on non-linearity, Bill Fuqua, 2004/10/21
• Re: [Amps] a question on non-linearity, Bill Turner, 2004/10/22

[Amps] (no subject), uvc@acninc, 2004/10/21

• [Amps] (no subject), Ron, 2004/10/28
  • Re: [Amps] (no subject), Ken Beals, 2004/10/28
  • Re: [Amps] (no subject), Ron, 2004/10/28
• RE: [Amps] (no subject), ad5gb, 2004/10/28

[Amps] e-mails, Will Matney, 2004/10/21

• [Amps] E-mails, Will Matney, 2004/10/27

[Amps] Dip Meter wanted, Will Matney, 2004/10/20

• Re: [Amps] Dip Meter wanted, Alek Petkovic, 2004/10/21

[Amps] RE: Snipers are the scourge of Ebay], Arthur Moe, 2004/10/20

• Re: [Amps] RE: Snipers are the scourge of Ebay], Bill Turner, 2004/10/20
  • Re: [Amps] RE: Snipers are the scourge of Ebay], Arthur Moe, 2004/10/20
    • Re: [Amps] RE: Snipers are the scourge of Ebay], Bill Turner, 2004/10/20
    • Re: [Amps] RE: Snipers are the scourge of Ebay], carl seyersdahl, 2004/10/20
    • Re: [Amps] RE: Snipers are the scourge of Ebay], k7fm, 2004/10/20
    • Re: [Amps] RE: Snipers are the scourge of Ebay], Bill Turner, 2004/10/20
• Re: [Amps] RE: Snipers are the scourge of Ebay], Tony King, 2004/10/20
  • Re: [Amps] RE: Snipers are the scourge of Ebay], David Kirkby, 2004/10/20

[Amps] 10 gauge teflon wire?, Bill Turner, 2004/10/20

• RE: [Amps] 10 gauge teflon wire?, Charles Wooten NF4A, 2004/10/20
• Re: [Amps] 10 gauge teflon wire?, Bill Turner, 2004/10/20

[Amps] Why only 5kw?, StephenTetorka, 2004/10/20

• Re: [Amps] Why only 5kw?, Bill Turner, 2004/10/20

[Amps] Blowing off steam, Will Matney, 2004/10/20

• Re: [Amps] Blowing off steam, Steve Thompson, 2004/10/20
  • Re: [Amps] Blowing off steam, Will Matney, 2004/10/20
• Re: [Amps] Blowing off steam, Don Havlicek, 2004/10/20
• Re: [Amps] Blowing off steam, Bill Turner, 2004/10/20
  • Re: [Amps] Blowing off steam, W0UN -- John Brosnahan, 2004/10/20
    • Re: [Amps] Blowing off steam, Don Havlicek, 2004/10/20
    • Re: [Amps] Blowing off steam, w9ge, 2004/10/20
    • Re: [Amps] Blowing off steam, Rob & Terri Sherwood, 2004/10/20
• Re: [Amps] Blowing off steam, n4gi, 2004/10/20
  • Re: [Amps] Blowing off steam, jsb, 2004/10/20
  • Re: [Amps] Blowing off steam, K7RDX, 2004/10/20
    • Re: [Amps] Blowing off steam, Bill Turner, 2004/10/20
    • Re: [Amps] Blowing off steam, Dino Darling, 2004/10/20
• Re: [Amps] Blowing off steam, David C. Hallam, 2004/10/20
  • Re: [Amps] Blowing off steam, Bill Turner, 2004/10/20
• Re: [Amps] Blowing off steam, Harold B. Mandel, 2004/10/23

[Amps] Drake L4/L4-B tube replacement - 3-400Z or 3-500Z or 3-500ZG, Jason Buchanan, 2004/10/20

• Re: [Amps] Drake L4/L4-B tube replacement - 3-400Z or 3-500Z or3-500ZG, DF3KV, 2004/10/20
  • Re: [Amps] Drake L4/L4-B tube replacement - 3-400Z or 3-500Zor 3-500ZG, Bill Fuqua, 2004/10/20
• Re: [Amps] Drake L4/L4-B tube replacement - 3-400Z or 3-500Z or3-500ZG, R . Measures, 2004/10/20

[Amps] RE: 5 kw amps -- why?, Rob Atkinson, K5UJ, 2004/10/19

• Re: [Amps] RE: 5 kw amps -- why?, Joe Isabella, 2004/10/19
• Re: [Amps] RE: 5 kw amps -- why?, R . Measures, 2004/10/20
• [Amps] Re: 5 kw amps -- why?, Rob Atkinson, K5UJ, 2004/10/20

[Amps] To who ever wanted a GAUSSMETER, Arthur Moe, 2004/10/19

• RE: [Amps] To who ever wanted a GAUSSMETER, Chuck (Jack) Hawley, 2004/10/19

[Amps] 5 kw amps -- why?, Rob Atkinson, K5UJ, 2004/10/19

• Re: [Amps] 5 kw amps -- why?, Don Havlicek, 2004/10/19
  • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Vic Rosenthal, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, lncarman, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
• Re: [Amps] 5 kw amps -- why?, Joe Isabella, 2004/10/19
  • Re: [Amps] 5 kw amps -- why?, Mike Manship, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, Vic Rosenthal, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, Joe Isabella, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
• Re: [Amps] 5 kw amps -- why?, Scott Manthe, 2004/10/19
  • Re: [Amps] 5 kw amps -- why?, w4oae, 2004/10/19
  • Re: [Amps] 5 kw amps -- why?, Bob Bruno - K2KI, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
  • Re: [Amps] 5 kw amps -- why?, Fortra, 2004/10/19
  • Re: [Amps] 5 kw amps -- why?, Barry Kirkwood, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, Joe Isabella, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, Steven Cook, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • RE : [Amps] 5 kw amps -- why?, hermans, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Peter Frenning, OZ1PIF, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Peter Frenning, OZ1PIF, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Joe Isabella, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, DF3KV, 2004/10/20
    • Message not available
    • Re: [Amps] 5 kw amps -- why?, Peter Frenning, OZ1PIF, 2004/10/21
  • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Mike Manship, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, jsb, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Will Matney, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Bill Turner, 2004/10/20
• RE: [Amps] 5 kw amps -- why?, George, 2004/10/19
  • RE: [Amps] 5 kw amps -- why?, jsb, 2004/10/19
• Re: [Amps] 5 kw amps -- why?, jsb, 2004/10/19
  • RE: [Amps] 5 kw amps -- why?, George, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, Michael Tope, 2004/10/19
    • RE: [Amps] 5 kw amps -- why?, George, 2004/10/19
    • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Bill Turner, 2004/10/20
    • Re: [Amps] 5 kw amps -- why?, Bill Turner, 2004/10/20
• Re: [Amps] 5 kw amps -- why?, Arthur Moe, 2004/10/19
• Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
• Re: [Amps] 5 kw amps -- why?, Colin Lamb, 2004/10/19
• Fw: [Amps] 5 kw amps -- why?, Orlando J. Palmer [KP4CY], 2004/10/19
• Re: [Amps] 5 kw amps -- why?, Rob Atkinson, K5UJ, 2004/10/20
  • Re: [Amps] 5 kw amps -- why?, R . Measures, 2004/10/20
• Re: [Amps] 5 kw amps -- why?, Harold B. Mandel, 2004/10/20
  • [Amps] Gettering 4CX800A GU74b, Jason Buchanan, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, R . Measures, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, Will Matney, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, Steve Thompson, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, R . Measures, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, Steve Thompson, 2004/10/21
    • Re: [Amps] Gettering 4CX800A GU74b, R . Measures, 2004/10/21
    • [Amps] SB-201 conversion to GI-7B?, Mike, K8LH, 2004/10/21
    • Re: [Amps] SB-201 conversion to GI-7B?, Manuel R. Alonso, 2004/10/21
    • Message not available
    • [Amps] SB-201 conversion to GI-7B?, Manuel R. Alonso, 2004/10/21

[Amps] QSK for TL-922, QSKguy, 2004/10/19

• Re: [Amps] QSK for TL-922, R . Measures, 2004/10/19
  • Re: [Amps] QSK for TL-922, bb, 2004/10/28

[Amps] Ameritron AL-80A tuning question, NW7US, Tomas, 2004/10/17

• Message not available
  • Re: [Amps] Ameritron AL-80A tuning question, NW7US, Tomas, 2004/10/17
• Re: [Amps] Ameritron AL-80A tuning question, R . Measures, 2004/10/17
• Re: [Amps] Ameritron AL-80A tuning question, KI4DJN, 2004/10/17

[Amps] why does input SWR change when HV applied?, Neil Carr G0JHC, 2004/10/17

• Re: [Amps] why does input SWR change when HV applied?, Will Matney, 2004/10/17
• Re: [Amps] why does input SWR change when HV applied?, jeff millar, 2004/10/17

[Amps] chimneys, Bruce Lanning, 2004/10/17

• Re: [Amps] chimneys, Mike Manship, 2004/10/17
  • Re: [Amps] chimneys, Jan Erik Holm, 2004/10/17
• Re: [Amps] chimneys, Will Matney, 2004/10/17

[Amps] GRT-22, Werner Hasemann, 2004/10/17

• Re: [Amps] GRT-22, JMLTINC, 2004/10/17
  • Re: [Amps] GRT-22, Web Williams, 2004/10/17

[Amps] Gaussmeter needed, Will Matney, 2004/10/16

• Re: [Amps] Gaussmeter needed, Will Matney, 2004/10/17

[Amps] knob & meter scales, gdaught6, 2004/10/16

• Re: [Amps] knob & meter scales, Bill Coleman N2BC, 2004/10/16
• Re: [Amps] knob & meter scales, W0UN -- John Brosnahan, 2004/10/16

[Amps] Drake L4 tube replacement, Jason Buchanan, 2004/10/15

• Re: [Amps] Drake L4 tube replacement, Jan Erik Holm, 2004/10/16
  • Re: [Amps] Drake L4 tube replacement, Jason Buchanan, 2004/10/16
    • Re: [Amps] Drake L4 tube replacement, Will Matney, 2004/10/16
    • Re: [Amps] Drake L4 tube replacement, Jan Erik Holm, 2004/10/17

[Amps] T-442?, StephenTetorka, 2004/10/15

• Re: [Amps] T-442?, Vic Rosenthal, 2004/10/15

[Amps] GI-46B Question, Bob Bruno - K2KI, 2004/10/14

• Re: [Amps] GI-46B Question, jeff millar, 2004/10/15
  • Re: [Amps] GI-46B Question, Arthur Moe, 2004/10/15
    • Message not available
    • Message not available
    • Re: [Amps] Transfer capacitance, was GI-46B Question, jeff millar, 2004/10/15
    • Re: [Amps] Transfer capacitance, was GI-46B Question, Traian, 2004/10/16
    • Re: [Amps] Transfer capacitance, was GI-46B Question, R . Measures, 2004/10/16
    • Re: [Amps] Transfer capacitance, was GI-46B Question, R . Vaicius, 2004/10/18

[Amps] gu84b tube length and sockets, Thomas Hix, 2004/10/14

• Re: [Amps] gu84b tube length and sockets, john devoldere, 2004/10/15

[Amps] Toms Tubes back up and running, Thomas Hix, 2004/10/14

• Re: [Amps] Toms Tubes back up and running, craxd, 2004/10/14

[Amps] Replies to single 4cx250b tube on 50Mhz-Six Meters (Thankyou), Ken G3WCS, 2004/10/13

• Re: [Amps] Replies to single 4cx250b tube on 50Mhz-Six Meters(Thank you), Dino Darling, 2004/10/21

[Amps] Bandswitch source or roller inductor, Manuel R. Alonso, 2004/10/13

• Re: [Amps] Bandswitch source or roller inductor, craxd, 2004/10/13
  • Re: [Amps] Bandswitch source or roller inductor, R . Measures, 2004/10/13
    • Message not available
    • Message not available
    • Re: [Amps] Bandswitch source or roller inductor, craxd, 2004/10/14
    • Re: [Amps] Bandswitch source or roller inductor, Web Williams, 2004/10/14
• Re: [Amps] Bandswitch source or roller inductor, peter . chadwick, 2004/10/14

RE: [BULK] - RE: [Amps] Looking for a design for a single 4cx250btube on50 Mhz-six meters., Steve Katz, 2004/10/12

• RE: [BULK] - Re: [Amps] Looking for a design for a single 4cx250btube on50 Mhz-six meters., Steve Katz, 2004/10/12

Re: [Amps] Looking for a design for a single 4cx250b tube on 50Mhz-six meters., craxd, 2004/10/12

• Re: [Amps] Looking for a design for a single 4cx250b tube on50 Mhz-six meters., Bill Fuqua, 2004/10/12
  • Re: [Amps] Looking for a design for a single 4cx250b tube on 50Mhz-six meters., craxd, 2004/10/12
    • Re: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-six meters., Arthur Moe, 2004/10/12
    • Re: [Amps] Looking for a design for a single 4cx250b tubeon 50 Mhz-six meters., Bill Fuqua, 2004/10/12
    • Re: [Amps] Looking for a design for a single 4cx250b tube on 50Mhz-six meters., craxd, 2004/10/12
    • Re: [Amps] Looking for a design for a single 4cx250btube on 50 Mhz-six meters., peter . chadwick, 2004/10/13
  • Re: [Amps] Looking for a design for a single 4cx250b tube on50 Mhz-six meters., Chris Pedder, 2004/10/12
    • RE: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-six meters., George, 2004/10/12
    • Re: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-six meters., R . Measures, 2004/10/12

[Amps] Gu-84B socket, Roger D Johnson, 2004/10/12

• [Amps] Gu-84B socket, craxd, 2004/10/12

RE: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-Six Meters, Skram, Helge (GE Healthcare), 2004/10/12

• Re: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-SixMeters, Karl-Arne Markström, 2004/10/12
  • Re: [Amps] Looking for a design for a single 4cx250b tube on50Mhz-SixMeters, Steve Thompson, 2004/10/12

[Amps] Transformers in parallel, kc4mne, 2004/10/11

• Re: [Amps] Transformers in parallel, lncarman, 2004/10/11
• Re: [Amps] Transformers in parallel, Bill Fuqua, 2004/10/11
• [Amps] Transformers in parallel, kd4lyh, 2004/10/11
• [Amps] Transformers in parallel, craxd, 2004/10/11

RE: [BULK] - Re: [Amps] Mod xmfr, Steve Katz, 2004/10/11

• RE: [BULK] - Re: [Amps] Mod xmfr, Joe Isabella, 2004/10/11

[Amps] Looking for a design for a single 4cx250b tube on 50Mhz -Six Meters, Ken G3WCS, 2004/10/11

• Re: [Amps] Looking for a design for a single 4cx250b tube on 50Mhz-Six Meters, Karl-Arne Markström, 2004/10/11

[Amps] linearity detector and the sonic web page, nospam4me@juno.com, 2004/10/11

• [Amps] Chimneys for Russian tubes, Paul Whatton, 2004/10/12
  • Re: [Amps] Chimneys for Russian tubes, craxd, 2004/10/12
    • Message not available
    • Re: [Amps] Chimneys for Russian tubes, craxd, 2004/10/12
  • Re: [Amps] Chimneys for Russian tubes, Ian White, G3SEK, 2004/10/12

[Amps] Mod xmfr, StephenTetorka, 2004/10/11

• Re: [Amps] Mod xmfr, peter . chadwick, 2004/10/11
  • Re: [Amps] Mod xmfr, Joe Isabella, 2004/10/11
    • Re: [Amps] Mod xmfr, peter . chadwick, 2004/10/11
    • Re: [Amps] Mod xmfr, Joe Isabella, 2004/10/11
• Re: [Amps] Mod xmfr, R . Measures, 2004/10/11
• [Amps] Mod xmfr, craxd, 2004/10/11
• Re: [Amps] Mod xmfr, Joe Isabella, 2004/10/11

[Amps] Ebay sales, craxd, 2004/10/11

• RE: [Amps] Ebay sales, Joe Subich, K4IK, 2004/10/11
• Re: [Amps] Ebay sales, Radio WC6W, 2004/10/11
  • Re: [Amps] Ebay sales, Michael Tope, 2004/10/13
• Re: [Amps] Ebay sales, craxd, 2004/10/11
• Re: [Amps] Ebay sales, Dennis12Amplify, 2004/10/11

[Amps] Plate choke for HF pi-networks, Bill Turner, 2004/10/10

• Re: [Amps] Plate choke for HF pi-networks, Harold B. Mandel, 2004/10/10
  • Re: [Amps] Plate choke for HF pi-networks, R . Measures, 2004/10/10

[Amps] Plate modulator xmfr ?, StephenTetorka, 2004/10/10

• Re: [Amps] Plate modulator xmfr ?, Karl-Arne Markström, 2004/10/10
  • Re: [Amps] Plate modulator xmfr ?, peter . chadwick, 2004/10/11
    • Re: [Amps] Plate modulator xmfr ?, R . Measures, 2004/10/11
    • Re: [Amps] Plate modulator xmfr ?, peter . chadwick, 2004/10/11
• Re: [Amps] Plate modulator xmfr ?, Vic Rosenthal, 2004/10/10
  • Re: [Amps] Plate modulator xmfr ?, R . Measures, 2004/10/10
    • Re: [Amps] Plate modulator xmfr ?, Bill Fuqua, 2004/10/11
• Re: [Amps] Plate modulator xmfr ?, R . Measures, 2004/10/10

[Amps] 4CX350 in Dentron Clipperton V ?????, JimMoci, 2004/10/09

• Re: [Amps] 4CX350 in Dentron Clipperton V ?????, Jan Erik Holm, 2004/10/09
  • Re: [Amps] 4CX350 in Dentron Clipperton V ?????, Steve Thompson, 2004/10/10
• Re: [Amps] 4CX350 in Dentron Clipperton V ?????, K8MLM, 2004/10/10
  • Re: [Amps] 4CX350 in Dentron Clipperton V ?????, Steve Thompson, 2004/10/10
    • Re: [Amps] 4CX350 in Dentron Clipperton V ?????, Karl-Arne Markström, 2004/10/10

[Amps] Need for input tuning circuit, Bill Turner, 2004/10/08

• Re: [Amps] Need for input tuning circuit, Phil Clements, 2004/10/08
• Re: Re: [Amps] Need for input tuning circuit, Bill L. Fuqua, 2004/10/08
  • Re: [Amps] Need for input tuning circuit, Vic Rosenthal, 2004/10/09
    • Re: [Amps] Need for input tuning circuit, DF3KV, 2004/10/09
    • Re: [Amps] Need for input tuning circuit, Vic Rosenthal, 2004/10/09
• Re: Re: [Amps] Need for input tuning circuit, Bill L. Fuqua, 2004/10/09
• Re: Re: [Amps] Need for input tuning circuit, Bill L. Fuqua, 2004/10/09
• Re: [Amps] Need for input tuning circuit, craxd, 2004/10/10

[Amps] Plate tank for 144 MHz using 8877, Bill Turner, 2004/10/08

• Re: [Amps] Plate tank for 144 MHz using 8877, jeff millar, 2004/10/09
• [Amps] Plate tank for 144 MHz using 8877, craxd, 2004/10/08
• [Amps] Plate tank for 144 MHz using 8877, Chris, 2004/10/08
• Re: [Amps] Plate tank for 144 MHz using 8877, David Smith, 2004/10/09

[Amps] PT2500A, carl seyersdahl, 2004/10/08

• RE: [Amps] PT2500A, George, 2004/10/08
• [Amps] PT2500A, craxd, 2004/10/08

[Amps] Linearity metering, Jason Buchanan, 2004/10/07

• Re: [Amps] Linearity metering, R . Measures, 2004/10/08
• Re: [Amps] Linearity metering, Ian White, G3SEK, 2004/10/08
• Re: [Amps] Linearity metering, Steve Thompson, 2004/10/08
  • Re: [Amps] Linearity metering, peter . chadwick, 2004/10/08
  • Re: [Amps] Linearity metering, Barry Kirkwood, 2004/10/08
• Re: [Amps] Linearity metering, wb8jkr, 2004/10/07

[Amps] orphan amp?, carl seyersdahl, 2004/10/07

• Re: [Amps] orphan amp?, R . Measures, 2004/10/07
• RE: [Amps] orphan amp?, Saad Mahaini, 2004/10/07
• RE: [Amps] orphan amp?, George, 2004/10/07
  • Re: [Amps] orphan amp?, Barry Kirkwood, 2004/10/08
• Re: [Amps] orphan amp?, Barry Kirkwood, 2004/10/08
• Re: [Amps] orphan amp?, David A. Pruett, 2004/10/09
  • Re: [Amps] orphan amp?, Barry Kirkwood, 2004/10/09

[Amps] Power metering in linears, Thomas Hoeppe, 2004/10/06

• RE: [Amps] Power metering in linears, craxd, 2004/10/07
  • Message not available
    • Re: [Amps] Power metering in linears, craxd, 2004/10/07
• Re: [Amps] Power metering in linears, Colin Lamb, 2004/10/07
• Re: [Amps] Power metering in linears, craxd, 2004/10/07
• Re: [Amps] Power metering in linears, Radio WC6W, 2004/10/07
  • Re: [Amps] Power metering in linears, Michael Tope, 2004/10/07
• Re: [Amps] Power metering in linears, Radio WC6W, 2004/10/08
  • Re: [Amps] Power metering in linears, Michael Tope, 2004/10/11
• Re: [Amps] Power metering in linears, Radio WC6W, 2004/10/11

[Amps] Re: Transformer in GLA 1000 B : OK for 2xGI 7 ?, craxd, 2004/10/06

• Re: [Amps] Re: Transformer in GLA 1000 B : OK for 2xGI 7 ?, craxd, 2004/10/06

[Amps] Transformer shop update, craxd, 2004/10/05

• Re: [Amps] Transformer shop update, craxd, 2004/10/05
  • Message not available
    • Re: [Amps] Transformer shop update, craxd, 2004/10/06
    • Re: [Amps] Transformer shop update, Ian White, G3SEK, 2004/10/08
• Re: [Amps] Transformer shop update, craxd, 2004/10/06
• Re: [Amps] Transformer shop update, craxd, 2004/10/06
  • Re: [Amps] Transformer shop update, Joe Isabella, 2004/10/06
• Re: [Amps] Transformer shop update, craxd, 2004/10/07
• Re: [Amps] Transformer shop update, craxd, 2004/10/08

[Amps] EDAL rectifiers TSPA, John T. M. Lyles, 2004/10/05

• Re: [Amps] EDAL rectifiers TSPA, Yuri Onipko, 2004/10/05

[Amps] Kenwood TL-922A on 6 meters?, Clay W7CE, 2004/10/04

• Re: [Amps] Kenwood TL-922A on 6 meters?, R . Measures, 2004/10/05
  • Re: [Amps] Kenwood TL-922A on 6 meters?, Bill Turner, 2004/10/06
    • Re: [Amps] Kenwood TL-922A on 6 meters?, Clay W7CE, 2004/10/06
    • Re: [Amps] Kenwood TL-922A on 6 meters?, Bill Turner, 2004/10/06
    • Re: [Amps] Kenwood TL-922A on 6 meters?, Clay W7CE, 2004/10/06

[Amps] 4-1000A Date Codes, AB5MM, 2004/10/04

• Re: [Amps] 4-1000A Date Codes, Radio WC6W, 2004/10/04

[Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, Geert Hofman, 2004/10/04

• [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, craxd, 2004/10/04
  • Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, Peter Frenning, OZ1PIF, 2004/10/05
  • Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, Steve Thompson, 2004/10/05
• Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, craxd, 2004/10/05
  • Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, Steve Thompson, 2004/10/05
  • Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, kenw2dtc, 2004/10/05
    • Message not available
    • Message not available
    • Re: [Amps] Transformer in GLA 1000 B : OK for 2xGI 7 ?, craxd, 2004/10/05

[Amps] bias for 3cx3000, Stan C., 2004/10/03

• Re: [Amps] bias for 3cx3000, Barry Kirkwood, 2004/10/03
  • Re: [Amps] bias for 3cx3000, Bill Turner, 2004/10/04
    • Re: [Amps] bias for 3cx3000, R . Measures, 2004/10/04
    • Re: [Amps] bias for 3cx3000, Barry Kirkwood, 2004/10/05
• Re: [Amps] bias for 3cx3000, R . Measures, 2004/10/04
• Re: [Amps] bias for 3cx3000, craxd, 2004/10/04

[Amps] L4B HV diodes, Yuri Onipko, 2004/10/03

• [Amps] L4B HV diodes, craxd, 2004/10/04
  • Message not available
    • Re: [Amps] L4B HV diodes, craxd, 2004/10/04
    • Re: [Amps] L4B HV diodes, Ian White, G3SEK, 2004/10/05
• Re: [Amps] L4B HV diodes, craxd, 2004/10/05

Re: [Amps] 3-500Z Recomendations, craxd, 2004/10/02

• Re: [Amps] 3-500Z Recomendations, R . Measures, 2004/10/02
• Re: [Amps] 3-500Z Recomendations, craxd, 2004/10/02

[Amps] Antique 304TL Amp, Bill Tippett, 2004/10/02

• [Amps] Stark 9-66, Carlos Avellanet [KF4RRN], 2004/10/02

[Amps] Power Supply loaded DC output, Manuel R. Alonso / KC4MNE, 2004/10/02

• Re: [Amps] Power Supply loaded DC output, jeff millar, 2004/10/02
• [Amps] Power Supply loaded DC output, craxd, 2004/10/02
  • [Amps] WTB: Plate RFC FL-2100B, Carlos Avellanet [KF4RRN], 2004/10/02
    • Re: [Amps] WTB: Plate RFC FL-2100B, R . Measures, 2004/10/02
    • Re: [Amps] WTB: Plate RFC FL-2100B, Carlos Avellanet [KF4RRN], 2004/10/02

[Amps] Question about Marconi amp filter board, Web Williams, 2004/10/02

• Re: [Amps] Question about Marconi amp filter board, Steve Thompson, 2004/10/02
• Re: [Amps] Question about Marconi amp filter board, Michael Tope, 2004/10/02

[Amps] 4-400's Differences?, GGLL, 2004/10/01

• Re: [Amps] 4-400's Differences?, R . Measures, 2004/10/01
  • [Amps] 3-500Z Recomendations, Steven Cook, 2004/10/01
    • Re: [Amps] 3-500Z Recomendations, R . Measures, 2004/10/02
    • Re: [Amps] 3-500Z Recomendations, Joe Isabella, 2004/10/02