Ken,
If six meters is all your wanting, no higher, I'd take a look at the way
the old Pride amplifier was made. The schematic for it is all over the
net. The input and output tank will need to be changed for six meters
but the circuit is almost the same. Pride made two models of this (both
the same), I think one was called KW-One and the other a 300 if I
recall. It dont have the best regulation for the screen and G1 bias, but
it did work up to 10 meters using one 4CX250B.
http://cbtricks.com/Amp/pride/index.htm
Will Matney
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|