[Amps] Eimac 3-500Z date codes, Vic Rosenthal K2VCO, 2014/04/29

• Re: [Amps] Eimac 3-500Z date codes, Jim W7RY, 2014/04/29
  • Re: [Amps] Eimac 3-500Z date codes, Carl, 2014/04/29
  • Re: [Amps] Eimac 3-500Z date codes, Vic Rosenthal K2VCO, 2014/04/29

Re: [Amps] low pass filter fail, peter chadwick, 2014/04/29

• Re: [Amps] low pass filter fail, peter chadwick, 2014/04/29
• Re: [Amps] low pass filter fail, John Lyles, 2014/04/30
  • Re: [Amps] low pass filter fail, Benedikt Sveinsson, 2014/04/30

[Amps] low pass filter fail, Jim Thomson, 2014/04/29

• Re: [Amps] low pass filter fail, Ian White, 2014/04/29
  • Re: [Amps] low pass filter fail, Jim Thomson, 2014/04/29
    • Re: [Amps] low pass filter fail, Carl, 2014/04/29
    • Re: [Amps] low pass filter fail, Ian White, 2014/04/29

[Amps] Low Pass Filter capacitor failures, peter chadwick, 2014/04/29

• Re: [Amps] Low Pass Filter capacitor failures / Fabricating high-Q VHF caps, Leigh Turner, 2014/04/29

[Amps] low pass filter fail ;), Jim Thomson, 2014/04/28

• Re: [Amps] low pass filter fail ;), Carl, 2014/04/28
  • Re: [Amps] low pass filter fail ;), Tom Thompson, 2014/04/28
    • Re: [Amps] low pass filter fail ;), ZL2AAA, 2014/04/29
• Re: [Amps] low pass filter fail / the perils of high RF circulating currents, Leigh Turner, 2014/04/29

[Amps] Filament Growth Question, John Lyles, 2014/04/27

• [Amps] FW: Filament Growth Question, Matt, 2014/04/27

Re: [Amps] Amps Digest, Vol 136, Issue 42, Ed K0KL, 2014/04/26

• Re: [Amps] Amps Digest, Vol 136, Issue 42, peter chadwick, 2014/04/27

[Amps] low pass filter fail ;), Benedikt Sveinsson, 2014/04/25

• Re: [Amps] low pass filter fail ;), Benedikt Sveinsson, 2014/04/27
  • Re: [Amps] low pass filter fail ;), Bill Turner, 2014/04/28
• Re: [Amps] low pass filter fail ;), peter chadwick, 2014/04/28

[Amps] Auto tune conversion using stepper motors?, Markku Oksanen, 2014/04/25

• Re: [Amps] Auto tune conversion using stepper motors?, MU 4CX250B, 2014/04/25
• Message not available
  • Re: [Amps] Auto tune conversion using stepper motors?, Markku Oksanen, 2014/04/27
    • Re: [Amps] Auto tune conversion using stepper motors?, Jim Garland, 2014/04/27
• Re: [Amps] Auto tune conversion using stepper motors?, peter chadwick, 2014/04/27
  • Re: [Amps] Auto tune conversion using stepper motors?, Jim Garland, 2014/04/27

[Amps] WEIRD ONE SOLVED, Bill & Liz, 2014/04/24

• Re: [Amps] WEIRD ONE SOLVED, Bryan Swadener via Amps, 2014/04/25

[Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., pdussertvidalet, 2014/04/24

• Re: [Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., Zev Darack, 2014/04/24
  • Re: [Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., Alex Malyava, 2014/04/24
• Re: [Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., Michael Clarson, 2014/04/24
  • Re: [Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., Carl, 2014/04/24
    • Re: [Amps] Fwd: Visit to USA , New-York , 6th-14een of may 2014 ., Michael Clarson, 2014/04/24

[Amps] Alpha 78 with 8874 Triodes, Chuck Curran, 2014/04/23

• Re: [Amps] Alpha 78 with 8874 Triodes, Carl, 2014/04/23
• Re: [Amps] Alpha 78 with 8874 Triodes, Glen Zook via Amps, 2014/04/23
  • Re: [Amps] Alpha 78 with 8874 Triodes, Jeff Blaine via Amps, 2014/04/23

[Amps] where to get TL-922 fil xfrmer rewound?, Steve Bookout, 2014/04/22

• Re: [Amps] where to get TL-922 fil xfrmer rewound?, Hardy Landskov, 2014/04/22
  • Re: [Amps] where to get TL-922 fil xfrmer rewound?, Carl, 2014/04/22

[Amps] Filter capacitors, Robert Logan via Amps, 2014/04/22

• Re: [Amps] Filter capacitors, Carl, 2014/04/22
  • Re: [Amps] Filter capacitors, Robert Logan via Amps, 2014/04/22
• Re: [Amps] Filter capacitors, Bill Turner, 2014/04/22
  • Re: [Amps] Filter capacitors, Robert Logan via Amps, 2014/04/22
• Re: [Amps] Filter capacitors, peter chadwick, 2014/04/23

[Amps] Power rating of Kenwood TL-922A plate transformer, Gustavo LU6AGV, 2014/04/22

• Re: [Amps] Power rating of Kenwood TL-922A plate transformer, Carl, 2014/04/22

[Amps] Filament Voltage Question, Jim Garland, 2014/04/22

• Re: [Amps] Filament Voltage Question, Radio WC6W via Amps, 2014/04/22
  • Re: [Amps] Filament Voltage Question, Fuqua, Bill L, 2014/04/22
    • Re: [Amps] Filament Voltage Question, Jim Garland, 2014/04/22
• Re: [Amps] Filament Voltage Question, Joe Subich, W4TV, 2014/04/22
  • Re: [Amps] Filament Voltage Question, Jim Garland, 2014/04/22
    • Re: [Amps] Filament Voltage Question, KA4INM, 2014/04/22
    • Re: [Amps] Filament Voltage Question, Bill Turner, 2014/04/22
• Re: [Amps] Filament Voltage Question, peter chadwick, 2014/04/22
• [Amps] Filament Voltage Question, John Lyles, 2014/04/26
  • [Amps] FW: Filament Voltage Question, Matt, 2014/04/26

[Amps] WEIRD ONE!, Bill & Liz, 2014/04/20

• Re: [Amps] WEIRD ONE!, Jim Garland, 2014/04/20
• Re: [Amps] WEIRD ONE!, Paul Hewitt, 2014/04/20
• Re: [Amps] WEIRD ONE!, Bryan Swadener via Amps, 2014/04/21

[Amps] SB220 tune cap, Paul Kraemer, 2014/04/18

• Re: [Amps] SB220 tune cap, Jim W7RY, 2014/04/18
  • [Amps] A question about grid bias in G3SEK's control board, Hsu, 2014/04/19
    • Re: [Amps] A question about grid bias in G3SEK's control board, Ian White, 2014/04/19
    • Re: [Amps] A question about grid bias in G3SEK's control board, Hsu via Amps, 2014/04/19
  • Re: [Amps] SB220 tune cap, Pete Smith N4ZR, 2014/04/19
    • Re: [Amps] SB220 tune cap, Carl via Amps, 2014/04/19
    • Re: [Amps] SB220 tune cap, Robert Groh via Amps, 2014/04/19
    • Re: [Amps] SB220 tune cap, Pete Smith N4ZR, 2014/04/22

[Amps] Is this relay suitable for 1kw+ RF?, qrv@kd4e.com, 2014/04/17

• Re: [Amps] Is this relay suitable for 1kw+ RF?, Drax Felton, 2014/04/17
  • Re: [Amps] Is this relay suitable for 1kw+ RF?, Drax Felton, 2014/04/17
    • Re: [Amps] Is this relay suitable for 1kw+ RF?, qrv@kd4e.com, 2014/04/17
  • Re: [Amps] Is this relay suitable for 1kw+ RF?, Peter Voelpel, 2014/04/17
• Re: [Amps] Is this relay suitable for 1kw+ RF?, Carl, 2014/04/17
  • Re: [Amps] Is this relay suitable for 1kw+ RF?, qrv@kd4e.com, 2014/04/17
    • Re: [Amps] Is this relay suitable for 1kw+ RF?, Carl, 2014/04/17
• Re: [Amps] Is this relay suitable for 1kw+ RF?, Alek Petkovic, 2014/04/17
  • Re: [Amps] Is this relay suitable for 1kw+ RF?, qrv@kd4e.com, 2014/04/17
• Re: [Amps] Is this relay suitable for 1kw+ RF?, peter chadwick, 2014/04/18

[Amps] AL572 for DXpedition, parts to take along, Jeff Kinzli N6GQ, 2014/04/16

• Re: [Amps] AL572 for DXpedition, parts to take along, Joe Subich, W4TV, 2014/04/16
  • Re: [Amps] AL572 for DXpedition, parts to take along, Jeff Kinzli N6GQ, 2014/04/16
  • Re: [Amps] AL572 for DXpedition, parts to take along, Alek Petkovic, 2014/04/16
    • Re: [Amps] AL572 for DXpedition, parts to take along, Jeff Kinzli N6GQ, 2014/04/16
    • Re: [Amps] AL572 for DXpedition, parts to take along, Carl, 2014/04/16
    • Re: [Amps] AL572 for DXpedition, parts to take along, Jeff Kinzli N6GQ, 2014/04/16
• Re: [Amps] AL572 for DXpedition, parts to take along, TexasRF, 2014/04/16
  • Re: [Amps] AL572 for DXpedition, parts to take along, Jeff Kinzli N6GQ, 2014/04/16
• Re: [Amps] AL572 for DXpedition, parts to take along, peter chadwick, 2014/04/16
• Re: [Amps] AL572 for DXpedition, parts to take along, K1SG, 2014/04/16

[Amps] Help With a Cisco Power Supply, Keith Densmore, 2014/04/14

• Re: [Amps] Help With a Cisco Power Supply, Ian White, 2014/04/14
• Re: [Amps] Help With a Cisco Power Supply, Dave Hartman, 2014/04/14
  • Re: [Amps] Help With a Cisco Power Supply, WD9SEF, 2014/04/14

[Amps] 3-400Z question, jeff wilaby, 2014/04/13

• Re: [Amps] 3-400Z question, rmorris, 2014/04/13
  • Re: [Amps] 3-400Z question, Peter Voelpel, 2014/04/13
• Re: [Amps] 3-400Z question, Carl, 2014/04/13
• Re: [Amps] 3-400Z question, TexasRF, 2014/04/13
• Re: [Amps] 3-400Z question, KA4INM, 2014/04/13

[Amps] FTDX5KMP to ICOM PW-1 Interface, Richard Solomon, 2014/04/10

• Re: [Amps] FTDX5KMP to ICOM PW-1 Interface, Joe Subich, W4TV, 2014/04/10

[Amps] ALS-600 vs ALS-1300, John K0CQW, 2014/04/10

• Re: [Amps] ALS-600 vs ALS-1300, qrv@kd4e.com, 2014/04/10
• Re: [Amps] ALS-600 vs ALS-1300, Bill Turner, 2014/04/10
• Re: [Amps] ALS-600 vs ALS-1300, Vic Rosenthal K2VCO, 2014/04/10
  • Re: [Amps] ALS-600 vs ALS-1300, Roger (K8RI), 2014/04/11
    • Re: [Amps] ALS-600 vs ALS-1300, BILL ENGLISH, 2014/04/11
  • Re: [Amps] ALS-600 vs ALS-1300, Roger, 2014/04/13
• Re: [Amps] ALS-600 vs ALS-1300, peter chadwick, 2014/04/10
  • Re: [Amps] ALS-600 vs ALS-1300, Richard Solomon, 2014/04/10
  • Re: [Amps] ALS-600 vs ALS-1300, Kevin Stover, 2014/04/10
    • Re: [Amps] ALS-600 vs ALS-1300, Bill Turner, 2014/04/10
    • Re: [Amps] ALS-600 vs ALS-1300, donroden, 2014/04/10
    • Re: [Amps] ALS-600 vs ALS-1300, qrv@kd4e.com, 2014/04/11
    • Re: [Amps] ALS-600 vs ALS-1300, Roger, 2014/04/16
    • Re: [Amps] ALS-600 vs ALS-1300, Don Allen, 2014/04/16
    • Re: [Amps] ALS-600 vs ALS-1300, Richard Solomon, 2014/04/16
    • Re: [Amps] ALS-600 vs ALS-1300, Kevin Stover, 2014/04/17

[Amps] Front Panel Express Help, Jim W7RY, 2014/04/09

• Re: [Amps] Front Panel Express Help, Paul Christensen, 2014/04/09
  • Re: [Amps] Front Panel Express Help, MU 4CX250B, 2014/04/09
    • Re: [Amps] Front Panel Express Help, Paul Christensen, 2014/04/09
    • Re: [Amps] Front Panel Express Help, Jim W7RY, 2014/04/10
    • Re: [Amps] Front Panel Express Help, Jim W7RY, 2014/04/10
    • Re: [Amps] Front Panel Express Help, Jim W7RY, 2014/04/10
    • Re: [Amps] Front Panel Express Help, Jim W7RY, 2014/04/10

[Amps] just bragging I guess, Charles Harpole, 2014/04/09

• Re: [Amps] just bragging I guess, Martin Sole (HS0ZED), 2014/04/09
  • Re: [Amps] just bragging I guess, Ron Settle, 2014/04/09
    • Re: [Amps] just bragging I guess, Charles Harpole, 2014/04/09

[Amps] dual cavity, Paul Decker, 2014/04/08

• Re: [Amps] dual cavity, mikflathead, 2014/04/08
• Re: [Amps] dual cavity, kg7hf, 2014/04/08
  • Re: [Amps] dual cavity, Carl, 2014/04/09
    • [Amps] Alpha 76PA, DGB, 2014/04/09
• [Amps] dual cavity, John Lyles, 2014/04/09

[Amps] Replacing light bulbs in a Command HF2500E, Joe Barnes, 2014/04/07

• [Amps] Question: Where to buy?, w4foa, 2014/04/08
  • Re: [Amps] Question: Where to buy?, Zev Darack, 2014/04/08
  • Re: [Amps] Question: Where to buy?, Carl, 2014/04/08
  • Re: [Amps] Question: Where to buy?, w4foa, 2014/04/08
    • Re: [Amps] Question: Where to buy?, Carl, 2014/04/08
    • Re: [Amps] Question: Where to buy?, Glen Zook, 2014/04/08

[Amps] Clipperton L, Maynard Anderson, 2014/04/07

• Re: [Amps] Clipperton L, n8de, 2014/04/07
  • Re: [Amps] Clipperton L, Tom Osborne, 2014/04/08
• Re: [Amps] LED Display, k7fm, 2014/04/07
  • Re: [Amps] LED Display, Bill Turner, 2014/04/08

[Amps] 4CX1600B options, John Lyles, 2014/04/05

• Re: [Amps] 4CX1600B options, Leigh Turner, 2014/04/05
• Re: [Amps] 4CX1600B options, Alek Petkovic, 2014/04/05
  • Re: [Amps] 4CX1600B options, Carl, 2014/04/06

[Amps] antenna analyzer., Paul Decker, 2014/04/05

• Re: [Amps] antenna analyzer., Vic Rosenthal K2VCO, 2014/04/05

[Amps] HF2500 Power Supply Caps, Jim W7RY, 2014/04/05

• Re: [Amps] HF2500 Power Supply Caps, Carl, 2014/04/05
  • Re: [Amps] HF2500 Power Supply Caps, Bill Turner, 2014/04/05
• [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/05
  • Re: [Amps] HF2500 Power Supply Caps, Bill Turner, 2014/04/06
    • Re: [Amps] HF2500 Power Supply Caps, Ian White, 2014/04/06
    • Re: [Amps] HF2500 Power Supply Caps, George, 2014/04/06
    • Re: [Amps] HF2500 Power Supply Caps, Bill Turner, 2014/04/06
  • Re: [Amps] HF2500 Power Supply Caps, Paul Hewitt, 2014/04/06
    • Re: [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/07
    • Re: [Amps] HF2500 Power Supply Caps, Jim Garland, 2014/04/07
    • Re: [Amps] HF2500 Power Supply Caps, Paul Hewitt, 2014/04/08
    • Re: [Amps] HF2500 Power Supply Caps, Carl, 2014/04/08
    • Re: [Amps] HF2500 Power Supply Caps, Paul Hewitt, 2014/04/08
    • Re: [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/08
• Re: [Amps] HF2500 Power Supply Caps, peter chadwick, 2014/04/07
• [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/07
• [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/07
• Re: [Amps] HF2500 Power Supply Caps, TexasRF, 2014/04/07
• Re: [Amps] HF2500 Power Supply Caps, Steve, 2014/04/07
  • Re: [Amps] HF2500 Power Supply Caps, Carl, 2014/04/07
• [Amps] HF2500 Power Supply Caps, Jim Thomson, 2014/04/07
• Re: [Amps] HF2500 Power Supply Caps, Steve, 2014/04/08
  • Re: [Amps] HF2500 Power Supply Caps, Carl, 2014/04/08

[Amps] 2xGS35b on HF, Benedikt Sveinsson, 2014/04/04

• Re: [Amps] 2xGS35b on HF, Bill Turner, 2014/04/04
• Re: [Amps] 2xGS35b on HF, Geert PA3CSG, 2014/04/04
  • Re: [Amps] 2xGS35b on HF, Benedikt Sveinsson, 2014/04/04

[Amps] 3-500Zs inverted, Pete Smith N4ZR, 2014/04/03

• Re: [Amps] 3-500Zs inverted, Joe Subich, W4TV, 2014/04/03
• Re: [Amps] 3-500Zs inverted, gdaught6, 2014/04/03
• Re: [Amps] 3-500Zs inverted, RMorris, 2014/04/03
  • Re: [Amps] 3-500Zs inverted, Carl, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, RMorris, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, Carl, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, Vic Rosenthal K2VCO, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, Alek Petkovic, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, Saandy, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, Alek Petkovic, 2014/04/03
    • Re: [Amps] 3-500Zs inverted, donroden, 2014/04/04
• Re: [Amps] 3-500Zs inverted, Jim Hargrave, 2014/04/03
• Re: [Amps] 3-500Zs inverted, Pete Smith N4ZR, 2014/04/04
• Re: [Amps] 3-500Zs inverted, peter chadwick, 2014/04/04

[Amps] Where post useful info?, Charles Harpole, 2014/04/02

• Re: [Amps] Where post useful info?, Roger (K8RI), 2014/04/02
  • Re: [Amps] Where post useful info?, Benedikt Sveinsson, 2014/04/02
    • Re: [Amps] Where post useful info?, Carl, 2014/04/02
    • Re: [Amps] Where post useful info?, Roger (K8RI), 2014/04/02
• Re: [Amps] Where post useful info?, Morel Grunberg, 2014/04/02
• Re: [Amps] Where post useful info?, Bill Turner, 2014/04/02

Re: [Amps] B&W PT-2500A on 10m?, bob, 2014/04/02

• Re: [Amps] B&W PT-2500A on 10m?, Tom Osborne, 2014/04/02
• Re: [Amps] B&W PT-2500A on 10m?, RMorris, 2014/04/02
  • Message not available
    • Re: [Amps] B&W PT-2500A on 10m?, RMorris, 2014/04/02
  • Re: [Amps] B&W PT-2500A on 10m?, Carl, 2014/04/02
    • Re: [Amps] B&W PT-2500A on 10m?, Fern, 2014/04/02
    • Re: [Amps] B&W PT-2500A on 10m?, Carl, 2014/04/03
    • Re: [Amps] B&W PT-2500A on 10m?, Fern, 2014/04/03
    • Re: [Amps] B&W PT-2500A on 10m?, Carl, 2014/04/03
    • Re: [Amps] B&W PT-2500A on 10m?, Gary Smith, 2014/04/02
• Re: [Amps] B&W PT-2500A on 10m?, bob, 2014/04/03
  • Re: [Amps] B&W PT-2500A on 10m?, Joe Subich, W4TV, 2014/04/03
  • Re: [Amps] B&W PT-2500A on 10m?, Alek Petkovic, 2014/04/03
  • Re: [Amps] B&W PT-2500A on 10m?, Jim W7RY, 2014/04/04

Re: [Amps] L4-B, mgb , 2014/04/01

• Re: [Amps] L4-B, Al Kozakiewicz, 2014/04/01
• Re: [Amps] L4-B, donroden, 2014/04/01
• Re: [Amps] L4-B, mgb , 2014/04/03
• Re: [Amps] L4-B, Bryan Swadener, 2014/04/03

Re: [Amps] Alpha 76PA, Carl, 2014/04/01

• Re: [Amps] Alpha 76PA, DGB, 2014/04/01

[Amps] How, and at what stage in production, are vac variable, Jim Thomson, 2014/04/01

• Re: [Amps] How, and at what stage in production, are vac variable, Ian White, 2014/04/01
  • Re: [Amps] How, and at what stage in production, are vac variable, Roger (K8RI), 2014/04/01