ORIGINAL MESSAGE: (may be snipped)
On 4/5/2014 1:29 PM, Jim Thomson wrote:
## use whatever size cap you want.
REPLY:
I disagree. Use the smallest cap that will give you the performance you
need in terms of ripple and dynamic regulation. Anything beyond that is
a waste and potentially damaging. Not all arcs happen ahead of the
glitch resistor or the HV fuse.
Good designers are paid big bucks to accomplish the job without overkill
on parts specs. Learn to be one.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|