Towertalk
[Top] [All Lists]

Re: [TowerTalk] Digging holes for anchor rods

To: Jim Brown <jim@audiosystemsgroup.com>
Subject: Re: [TowerTalk] Digging holes for anchor rods
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 28 Apr 2010 19:38:08 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Jim Brown wrote:
> On Wed, 28 Apr 2010 13:12:37 -0500, chas wrote:
>
>   
>> Jim, don't you reckon that if you had to sacrifice one vs the other that the 
>> support every 120* on the compass is probably more important than the 
>> distance out from the base to the support pipes?  as long as the latter 
>> exceeds the 80%?
>>     
>
> Both are important. Consider the vertical angle between the guy and the point 
> where it meets the tower as a MINIMUM. In other words, it's OK for the guy 
> hit the ground further away, but not closer. 
>   
That's assuming the guys are hooked to a "guy bracket" such as the 
GA25GD for the 25G or the equivalent for the 45G which takes the side 
load off the tower legs and assuming the extra distance is "reasonable", 
particularly when using a heavy guy made of EHS. Also the longer the guy 
the more prone to low frequency oscillation, or galloping.

73

Roger (K8RI)
> 73,
>
> Jim K9YC
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>