Towertalk
[Top] [All Lists]

Re: [TowerTalk] Digging holes for anchor rods

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Digging holes for anchor rods
From: chas <chasm@texas.net>
Date: Wed, 28 Apr 2010 13:12:37 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Jim Brown wrote:
> On Wed, 28 Apr 2010 09:20:01 -0400, Mark Robinson wrote:
>  What matters is 1) the ANGLE between the guy wire and the tower which should 
> be held at Rohn's recommendations, and the horizontal angle between the guys, 
> which should be close to 120 degrees. 
> 
> 73,
> 
> Jim K9YC


Jim, don't you reckon that if you had to sacrifice one vs the other that the 
support every 120* on the compass is probably more important than the 
distance out from the base to the support pipes?  as long as the latter 
exceeds the 80%?

In fact, here on the coast, I really think that the compass spread is a lot 
more important considering that with a hurricane, flat winds, downbursts and 
all that sort of thing that we have down here...  can come from every 
direction... iow, forget trying to guy against assaults from prevailing 
directions.   sure as shooting, you will get something from your weak side!!

thanks
chas
-- 
chasm@texas.net   k5dam  Houston, TX

http://militarysignatures.com/signatures/member14013.png
--
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>