Re: [TowerTalk] Digging holes for anchor rods

["Jim Brown" <jim@audiosystemsgroup.com>]

On Wed, 28 Apr 2010 09:20:01 -0400, Mark Robinson wrote:

>Is it important that the guy anchors are out at the same distance?. For 
>instance on  a 100 foot tower. 45G Rohn says 80% which is 80 feet. If one 
>guy anchor point is at 108 feet, one is at 97 feet and another is at 95 
>feet, is that OK?

What matters is 1) the ANGLE between the guy wire and the tower which should 
be held at Rohn's recommendations, and the horizontal angle between the guys, 
which should be close to 120 degrees. 

73,

Jim K9YC


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk