Amps Mailing List (thread)

[Amps] Millen dipper, carl seyersdahl, 2005/09/30
- Re: [Amps] Millen dipper, Floyd Sense, 2005/09/30
  - Re: [Amps] Millen dipper, k7fm, 2005/09/30
- Re: [Amps] Millen dipper, Will Matney, 2005/09/30
[Amps] Emtron DX3 interference with DSL modem, Lon W. Cottingham, 2005/09/30
[Amps] 5CX1500, Ian White G/GM3SEK, 2005/09/30
[Amps] 3CX1500D7 Amp, Bob Maser, 2005/09/30
Re: [Amps] Emtron DX3 problem, HAROLD B MANDEL, 2005/09/30
[Amps] Emtorn DX3 problem, Lon W. Cottingham, 2005/09/30
- Re: [Amps] Emtorn DX3 problem, gdaught6, 2005/09/30
- Re: [Amps] Emtorn DX3 problem, Will Matney, 2005/09/30
  - Re: [Amps] Emtorn DX3 problem, Keith Dutson, 2005/09/30
- [Amps] Ron KA0RYT, Paul Whatton, 2005/09/30
[Amps] fl7000, Tim O'Rourke, 2005/09/30
[Amps] Two Tone Generator, wc6w@juno.com, 2005/09/29
- Re: [Amps] Two Tone Generator, Mark Hill, 2005/09/30
[Amps] 3-400z status, John T. M. Lyles, 2005/09/29
[Amps] TMC PAL-350 or PAL-500 interconnecting cable?, Karl-Arne Markström, 2005/09/29
[Amps] LaPort text, John T. M. Lyles, 2005/09/29
[Amps] why not graphite anodes?, John T. M. Lyles, 2005/09/29
- [Amps] QUADRA Amp Manual, va3pl @ cuic.ca, 2005/09/29
  - Re: [Amps] QUADRA Amp Manual, John- W4DJ, 2005/09/29
- Re: [Amps] why not graphite anodes?, R . Measures, 2005/09/29
- Re: [Amps] why not graphite anodes?, Carcia, Francis A HS, 2005/09/29
  - Re: [Amps] why not graphite anodes?, Peter Chadwick, 2005/09/29
    - Re: [Amps] why not graphite anodes?, R . Measures, 2005/09/30
[Amps] 900 MHZ MOTOROLA AMP., Robert Epling, 2005/09/28
[Amps] Motorola P/N STF2520A 900 MHZ 150 WA AMP., Robert Epling, 2005/09/28
[Amps] commander hf2500hp, n4jbk, 2005/09/28
- Re: [Amps] commander hf2500hp, Mike Schatzberg, 2005/09/28
[TowerTalk] Laport "Radio Antenna Engineering" -- Deal of theMillenium, W0UN -- John Brosnahan, 2005/09/28
[Amps] Ameritron AL-8d11H-- Again, Jim Reid, 2005/09/28
- Re: [Amps] Ameritron AL-8d11H-- Again, R . Measures, 2005/09/28
  - Re: [Amps] Ameritron AL-811H-- Again, Jim Reid, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Bob Maser, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Jim Reid, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Vic K2VCO, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, W5IOK, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Will Matney, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Bob Maser, 2005/09/30
    - Re: [Amps] Ameritron AL-811H-- Again, Will Matney, 2005/09/30
[Amps] FOR SALE 8877 autotune amp, Larry Emery, 2005/09/28
[Amps] manual sought, gdaught6, 2005/09/28
[Amps] 955, robert briggs, 2005/09/28
[Amps] Thanks!, Frank N. Haas, 2005/09/27
- Re: [Amps] Thanks!, Kenneth D. Grimm, K4XL, 2005/09/28
  - Re: [Amps] Thanks!, W0UN -- John Brosnahan, 2005/09/28
[Amps] re 955, robert briggs, 2005/09/27
- Re: [Amps] re 955, k7fm, 2005/09/27
  - Re: [Amps] re 955, Barrie Smith, 2005/09/27
    - Re: [Amps] re 955, Barrie Smith, 2005/09/27
    - Re: [Amps] re 955, k7fm, 2005/09/27
Re: [Amps] 3-500z, Rob Atkinson, K5UJ, 2005/09/27
[Amps] MLA-2500 Transformer, Tom Martin, 2005/09/27
[Amps] Suggestions for new Alpha Owner?, Frank N. Haas, 2005/09/27
- Re: [Amps] Suggestions for new Alpha Owner?, Michael Tope, 2005/09/27
  - Re: [Amps] Suggestions for new Alpha Owner?, R . Measures, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, Kenneth D. Grimm, K4XL, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, John- W4DJ, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, Michael Tope, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, W0UN -- John Brosnahan, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, Will Matney, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, R . Measures, 2005/09/28
    - Re: [Amps] Suggestions for new Alpha Owner?, Joe Subich, W4TV, 2005/09/27
    - Re: [Amps] Suggestions for new Alpha Owner?, R . Measures, 2005/09/28
    - Re: [Amps] Suggestions for new Alpha Owner?, Bob Nielsen, 2005/09/28
- Re: [Amps] Suggestions for new Alpha Owner?, Bob Maser, 2005/09/27
  - [Amps] Alpha 89, Stan Stockton, 2005/09/28
[Amps] WTB: AL-1500 or AL-1200, Scott Manthe, 2005/09/26
[Amps] 050sc component in schematic, Partain, Chuck, 2005/09/26
[Amps] 3-500Z and ZG triodes, John T. M. Lyles, 2005/09/26
- Re: [Amps] 3-500Z and ZG triodes, Joe Isabella, 2005/09/28
- Re: [Amps] 3-500Z and ZG triodes, HAROLD B MANDEL, 2005/09/28
  - Re: [Amps] 3-500Z and ZG triodes, Joe Isabella, 2005/09/28
  - Re: [Amps] 3-500Z and ZG triodes, Joe Isabella, 2005/09/28
  - Re: [Amps] 3-500Z and ZG triodes, R . Measures, 2005/09/28
[Amps] SELL: Complete 10-160m Alpha 76A Tank Circuit Component Package, w2cqm, 2005/09/25
[Amps] Ribbon conductor in inductors, Barrie Smith, 2005/09/25
- Re: [Amps] Ribbon conductor in inductors, wc6w@juno.com, 2005/09/26
Re: [Amps] Blower ratings, zl1aih, 2005/09/24
[Amps] grid dipper, carl seyersdahl, 2005/09/24
- Re: [Amps] grid dipper, Karl-Arne Markström, 2005/09/24
- Re: [Amps] grid dipper, Colin Lamb, 2005/09/25
[Amps] Transformer Efficiency Question?, Colin Lamb, 2005/09/23
- Re: [Amps] Transformer Efficiency Question?, TexasRF, 2005/09/23
[Amps] [Fwd: Re: [TenMeters] OT - Changing a Light-Bulb], Gary Smith, 2005/09/23
[Amps] In need of a Delay Tube, Dave Vondrasek, 2005/09/23
- Re: [Amps] In need of a Delay Tube, jeryb77, 2005/09/23
- Re: [Amps] In need of a Delay Tube, Larry Carman, 2005/09/23
  - Re: [Amps] In need of a Delay Tube, Gary Smith, 2005/09/23
    - Re: [Amps] In need of a Delay Tube, m.ford, 2005/09/23
  - Re: [Amps] In need of a Delay Tube, crawfish, 2005/09/23
- Re: [Amps] In need of a Delay Tube, Larry Carman, 2005/09/23
[Amps] Emtron DX-4 twin GU84B amp pictures, PA3DUV, 2005/09/22
[Amps] Eimac data codes, Floyd Sense, 2005/09/21
[Amps] Alpha 86 receive fuse, Floyd Sense, 2005/09/21
[Amps] Fingerstock, Alek Petkovic, 2005/09/21
[Amps] Ameritron 811H, Punderson, IV, James, 2005/09/21
- Re: [Amps] Ameritron 811H, R . Measures, 2005/09/22
[Amps] needed: wire, John T. M. Lyles, 2005/09/21
[Amps] 3rd Order IMD, David C. Hallam, 2005/09/21
- Re: [Amps] 3rd Order IMD, k7fm, 2005/09/21
- Re: [Amps] 3rd Order IMD, R . Measures, 2005/09/22
- Re: [Amps] 3rd Order IMD, Peter Chadwick, 2005/09/22
  - Re: [Amps] 3rd Order IMD, David C. Hallam, 2005/09/22
    - Re: [Amps] 3rd Order IMD, R . Measures, 2005/09/23
  - Re: [Amps] 3rd Order IMD, R . Measures, 2005/09/23
[Amps] User manual Emtron DX4, PA3DUV, 2005/09/21
Re: [Amps] [BULK] - Looking for a tube, Steve Katz, 2005/09/21
- Re: [Amps] [BULK] - Looking for a tube Ihave one 4cx1500B, n9iww, 2005/09/21
[Amps] Looking for a tube, ec1cwg, 2005/09/21
[Amps] 4CX1500A or 5CX1500A, David C. Hallam, 2005/09/21
[Amps] Eimac date codes, Floyd Sense, 2005/09/21
[Amps] FS 3cx1500, Base, chimeny and fil xfrmr, Sean Williams, 2005/09/21
- Re: [Amps] FS 3cx1500, Base, chimeny and fil xfrmr, Sean Williams, 2005/09/21
[Amps] 4CX1500B, robert briggs, 2005/09/21
- Re: [Amps] 4CX1500B, R . Measures, 2005/09/21
- Re: [Amps] 4CX1500B, Patrick Egloff, 2005/09/21
  - Re: [Amps] 4CX1500B, R . Measures, 2005/09/21
- Re: [Amps] 4CX1500B, Carcia, Francis A HS, 2005/09/21
  - Re: [Amps] 4CX1500B, k7fm, 2005/09/21
- Re: [Amps] 4CX1500B, Carcia, Francis A HS, 2005/09/21
- [Amps] 4CX1500B, robert briggs, 2005/09/21
  - Re: [Amps] 4CX1500B, R . Measures, 2005/09/22
    - Message not available
    - Re: [Amps] 4CX1500B, R . Measures, 2005/09/22
    - Re: [Amps] 4CX1500B, m.ford, 2005/09/22
    - Re: [Amps] 4CX1500B, R . Measures, 2005/09/23
- Re: [Amps] 4CX1500B, Carcia, Francis A HS, 2005/09/22
- Re: [Amps] 4CX1500B, Carcia, Francis A HS, 2005/09/22
  - Re: [Amps] 4CX1500B, R . Measures, 2005/09/23
- Re: [Amps] 4CX1500B, Carcia, Francis A HS, 2005/09/22
  - Re: [Amps] 4CX1500B, Steve Thompson, 2005/09/22
- Re: [Amps] 4CX1500B, Peter Chadwick, 2005/09/22
  - Re: [Amps] 4CX1500B, R . Measures, 2005/09/23
- Re: [Amps] 4CX1500B, Peter Chadwick, 2005/09/23
  - Re: [Amps] 4CX1500B, R . Measures, 2005/09/23
    - Re: [Amps] 4CX1500B, Peter Chadwick, 2005/09/26
    - Re: [Amps] 4CX1500B, R . Measures, 2005/09/26
Re: [Amps] Finger stock supplier, ad5gb, 2005/09/21
[Amps] 100 microhenry inductor, Barrie Smith, 2005/09/20
- Re: [Amps] 100 microhenry inductor, wc6w@juno.com, 2005/09/21
  - Re: [Amps] 100 microhenry inductor, Larry Keith, 2005/09/21
[Amps] Air Gap, Dennis Berry, 2005/09/20
[Amps] Fw: Expected output from Drake L7, ec1cwg, 2005/09/20
[Amps] Expected output from Drake L7, john, 2005/09/19
Re: [Amps] [BULK] - Re: SB200 loading problem, Steve Katz, 2005/09/19
- Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/20
  - Message not available
    - Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/21
- Re: [Amps] [BULK] - Re: SB200 loading problem, Steve Thompson, 2005/09/20
  - Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/20
    - Re: [Amps] [BULK] - Re: SB200 loading problem, Steve Thompson, 2005/09/20
    - Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/20
    - Re: [Amps] [BULK] - Re: SB200 loading problem, Steve Thompson, 2005/09/20
    - Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/20
    - [Amps] Finger stock supplier, Paul Whatton, 2005/09/20
    - Re: [Amps] Finger stock supplier, RICHARD GEORGE, 2005/09/20
    - Re: [Amps] Finger stock supplier, R . Measures, 2005/09/21
    - Re: [Amps] Finger stock supplier, David Kirkby, 2005/09/21
    - Re: [Amps] Finger stock supplier, Steve Thompson, 2005/09/21
    - Re: [Amps] Finger stock supplier, Paul Whatton, 2005/09/22
    - Re: [Amps] Finger stock supplier, Michael Jensen, 2005/09/21
    - Re: [Amps] [BULK] - Re: SB200 loading problem, carl seyersdahl, 2005/09/20
    - Re: [Amps] [BULK] - Re: SB200 loading problem, John Parkins, 2005/09/21
[Amps] SB200 loading problem, John Parkins, 2005/09/19
- Message not available
  - Re: [Amps] SB200 loading problem, John Parkins, 2005/09/19
[Amps] Yikes! Formatting problem - Drying Transformers Responses, Don Lemley, 2005/09/18
[Amps] Responses to: Drying out HV transformers / Chokes, Don Lemley, 2005/09/18
- Re: [Amps] Responses to: Drying out HV transformers / Chokes, Will Matney, 2005/09/18
[Amps] Tank Coil Cooling, m.ford, 2005/09/18
- Re: [Amps] Tank Coil Cooling, Steve Thompson, 2005/09/19
- Re: [Amps] Tank Coil Cooling, R . Measures, 2005/09/19
[Amps] Mirage B3016 mods, Augusto Yipmantin, 2005/09/18
[Amps] SWR Foldback driving a TL922, Robert Katz, 2005/09/18
- Re: [Amps] SWR Foldback driving a TL922, Mike Schatzberg, 2005/09/18
- Re: [Amps] SWR Foldback driving a TL922, Iezzi Family, 2005/09/18
[Amps] BendWorks, Will Matney, 2005/09/18
[Amps] e-mail, Will Matney, 2005/09/18
- Re: [Amps] e-mail, Keith Dutson, 2005/09/18
[Amps] SELL: Drake L4B Front Panel Verniers, w2cqm, 2005/09/18
[Amps] RS-converters, Svante Nordenstrom, 2005/09/18
[Amps] Drying out HV transformers / Chokes, Don Lemley, 2005/09/18
- Re: [Amps] Drying out HV transformers / Chokes, Steve Thompson, 2005/09/18
- Re: [Amps] Drying out HV transformers / Chokes, R . Measures, 2005/09/18
  - Re: [Amps] Drying out HV transformers / Chokes, k7rdx, 2005/09/18
    - Re: [Amps] Drying out HV transformers / Chokes, R . Measures, 2005/09/18
- Re: [Amps] Drying out HV transformers / Chokes, Will Matney, 2005/09/18
- Re: [Amps] Drying out HV transformers / Chokes, HAROLD B MANDEL, 2005/09/18
[Amps] RS-232 and stuff...., thaxton, 2005/09/17
- Re: [Amps] RS-232 and stuff...., David Kirkby, 2005/09/17
- Re: [Amps] RS-232 and stuff...., Gary Smith, 2005/09/18
[Amps] RS-232, HAROLD B MANDEL, 2005/09/17
- Re: [Amps] RS-232, PA3DUV, 2005/09/18
  - Re: [Amps] RS-232, Vic K2VCO, 2005/09/18
[Amps] Alpha 87A Question, jon s, 2005/09/17
- Re: [Amps] Alpha 87A Question, David Kirkby, 2005/09/17
- Re: [Amps] Alpha 87A Question, R . Measures, 2005/09/17
  - Re: [Amps] Alpha 87A Question, David Kirkby, 2005/09/17
    - Re: [Amps] Alpha 87A Question, m.ford, 2005/09/17
    - Re: [Amps] Alpha 87A Question, R . Measures, 2005/09/18
- Re: [Amps] Alpha 87A Question, jon s, 2005/09/18
  - Re: [Amps] Alpha 87A Question, David Kirkby, 2005/09/18
    - Re: [Amps] Alpha 87A Question, Keith Dutson, 2005/09/18
    - Re: [Amps] Alpha 87A Question, R . Measures, 2005/09/19
[Amps] AL-811H Grid Current Issue, Daniel Hileman, 2005/09/17
[Amps] YL1750, Robert Offer, 2005/09/17
Re: [Amps] Amps USB, AA6DX - Mark, 2005/09/16
[Amps] Need Henry 2K Classic Manual?, Rich Hallman - N7TR, 2005/09/16
Re: [Amps] Alpha releases New Amp 9500, TexasRF, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Keith Dutson, 2005/09/16
  - Re: [Amps] Alpha releases New Amp 9500, Bill Fuqua, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Steven Grant, W4IIV, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Harley5477, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, TexasRF, 2005/09/16
  - Re: [Amps] Alpha releases New Amp 9500, Keith Dutson, 2005/09/16
  - Re: [Amps] Alpha releases New Amp 9500, Patrick, 2005/09/16
  - Re: [Amps] Alpha releases New Amp 9500, Bob Maser, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, TexasRF, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Bill L. Fuqua, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Alek Petkovic, 2005/09/17
  - Re: [Amps] Alpha releases New Amp 9500, R . Measures, 2005/09/17
  - Re: [Amps] Alpha releases New Amp 9500, Jim Forsyth, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, R . Measures, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Jim Forsyth, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, R . Measures, 2005/09/17
  - Re: [Amps] Alpha releases New Amp 9500, Mike Sawyer, 2005/09/18
- Re: [Amps] Alpha releases New Amp 9500, John Adkins, 2005/09/17
  - Re: [Amps] Alpha releases New Amp 9500, Steven Grant, W4IIV, 2005/09/18
[Amps] Alpha releases New Amp 9500, John, 2005/09/16
- Re: [Amps] Alpha releases New Amp 9500, Paul Christensen, 2005/09/16
- [Amps] Alpha releases New Amp 9500, John Adkins, 2005/09/16
  - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Karl-Arne Markström, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Keith Dutson, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Keith Dutson, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Bill Coleman N2BC, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Keith Dutson, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Paul Christensen, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, Jan Erik Holm, 2005/09/18
    - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/18
    - Re: [Amps] Alpha releases New Amp 9500, Will Matney, 2005/09/17
    - Re: [Amps] Alpha releases New Amp 9500, George Clute, 2005/09/18
Re: [Amps] RE : Alpha releases New Amp 9500, Colin Lamb, 2005/09/16
- Re: [Amps] RE : Alpha releases New Amp 9500, Steve Thompson, 2005/09/16
[Amps] Emtron DX15, pa3duv, 2005/09/16
- Re: [Amps] Emtron DX15, Marc Wullaert, 2005/09/16
  - Re: [Amps] Emtron DX14 or DX15, PA3DUV, 2005/09/17
    - Re: [Amps] Emtron DX14 or DX15, Marc Wullaert, 2005/09/18
[Amps] Teflon isolation ?, Patrick Egloff, 2005/09/16
- Re: [Amps] Teflon isolation ?, Steve Thompson, 2005/09/16
- Re: [Amps] Teflon isolation ?, Patrick Egloff, 2005/09/16
[Amps] SELL: Alpha 76A 10-160m Complete Tank Circuit, w2cqm, 2005/09/15
[Amps] Yaesu FL-7000 on 10/12 meters, Edward Gable, 2005/09/15
[Amps] stepper motors, KD7QAE, 2005/09/14
- Re: [Amps] stepper motors, Paul Hewitt, 2005/09/15
- Re: [Amps] stepper motors, wc6w@juno.com, 2005/09/15
  - Re: [Amps] stepper motors, k7rdx, 2005/09/15
[Amps] tubes needed, va3pl @ cuic.ca, 2005/09/14
[Amps] Is there any VISIBLE difference of 4CX1000A and 4CX1500B ??, Ulli Grunow, 2005/09/13
- Re: [Amps] Is there any VISIBLE difference of 4CX1000A and 4CX1500B ??, Steve Thompson, 2005/09/13
- Re: [Amps] Is there any VISIBLE difference of 4CX1000A and 4CX1500B ??, wc6w@juno.com, 2005/09/13
  - [Amps] For Sale AL 1200 Amp Ameritron, n9iww, 2005/09/13
    - Re: [Amps] For Sale AL 1200 Amp Ameritron, Dino Darling, 2005/09/13
Re: [Amps] Project Boxes, James Nowotarski, 2005/09/12
[Amps] MTBF Thread..., sccook1, 2005/09/12
- Re: [Amps] MTBF Thread..., David Kirkby, 2005/09/14
  - Re: [Amps] MTBF Thread..., Ian White G/GM3SEK, 2005/09/14
  - Re: [Amps] MTBF Thread..., Keith Dutson, 2005/09/14
- Re: [Amps] MTBF Thread..., Steve Katz, 2005/09/14
  - [Amps] Alpha releases New Amp 9500, John- W4DJ, 2005/09/14
    - Re: [Amps] Alpha releases New Amp 9500, jeff millar, 2005/09/16
    - Re: [Amps] Alpha releases New Amp 9500, bob finger, 2005/09/16
    - [Amps] RE : Alpha releases New Amp 9500, hermans, 2005/09/16
    - [Amps] just break down and buy the cavle @ Alpha releases New Amp 9500, n9iww, 2005/09/16
    - Re: [Amps] Alpha releases New Amp 9500, David Kirkby, 2005/09/16
    - Re: [Amps] Alpha releases New Amp 9500, Bill Coleman, 2005/09/20
    - Re: [Amps] Alpha releases New Amp 9500, W2RU - Bud Hippisley, 2005/09/21
    - Re: [Amps] Alpha releases New Amp 9500, Bill Coleman, 2005/09/21
    - Re: [Amps] Alpha releases New Amp 9500, Jim Brown, 2005/09/22
    - Re: [Amps] Alpha releases New Amp 9500, W2RU - Bud Hippisley, 2005/09/22
    - [Amps] RE : Alpha releases New Amp 9500, hermans, 2005/09/22
    - Re: [Amps] Alpha releases New Amp 9500, Jim Brown, 2005/09/16
- Re: [Amps] MTBF Thread..., sccook1, 2005/09/14
- Re: [Amps] MTBF Thread..., Steve Katz, 2005/09/14
  - Re: [Amps] MTBF Thread..., k7fm, 2005/09/14
Re: [Amps] [BULK] - Re: Screen Supply for 4CX250 series, Steve Katz, 2005/09/12
Re: [Amps] 4-1000 Amp, Rich, 2005/09/12
[Amps] Project Boxes..., Dino Darling, 2005/09/12
- Re: [Amps] Project Boxes..., Ron Spencer, 2005/09/12
- Re: [Amps] Project Boxes..., HAROLD B MANDEL, 2005/09/12
  - Re: [Amps] Project Boxes..., Chris Howard, 2005/09/12
[Amps] looking for choke specs, Don Lemley, 2005/09/12
[Amps] AL-80A "spitting" on 80m, Relay problems., Bill Coleman, 2005/09/11
- Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Tom Rauch, 2005/09/13
  - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Bill Coleman, 2005/09/12
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., R . Measures, 2005/09/13
  - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Bill Coleman, 2005/09/14
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Steve Thompson, 2005/09/15
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., R . Measures, 2005/09/15
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Bill Coleman, 2005/09/19
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., R . Measures, 2005/09/20
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., Tom Rauch, 2005/09/16
    - Re: [Amps] AL-80A "spitting" on 80m, Relay problems., R . Measures, 2005/09/17
Re: [Amps] Screen Supply for 4CX250 series, David Lisney, 2005/09/11
- Re: [Amps] Screen Supply for 4CX250 series, David Kirkby, 2005/09/11
  - Re: [Amps] Screen Supply for 4CX250 series, Keith Dutson, 2005/09/11
    - Re: [Amps] Screen Supply for 4CX250 series, David Kirkby, 2005/09/12
Re: [Amps] 4-1000, Rich, 2005/09/11
- Re: [Amps] 4-1000, HAROLD B MANDEL, 2005/09/11
[Amps] Looking for someone in Fla that knows alot about 4-1000 amps?, Jack, 2005/09/10
[Amps] QSK for Ameritron AL 1200, Andrew Catanzaro, 2005/09/10
[Amps] Cathode impedance, GGLL, 2005/09/09
- Re: [Amps] Cathode impedance, TexasRF, 2005/09/10
[Amps] 4CX15,000A screen PS, John T. M. Lyles, 2005/09/09
- Re: [Amps] 4CX15,000A screen PS, R . Measures, 2005/09/09
[Amps] Looking for AMP, DH5HV, 2005/09/09
[Amps] 5cx1500 sockets and chimneys for sale, Larry Carman, 2005/09/08
[Amps] Screen Supply, Chris, 2005/09/08
- Re: [Amps] Screen Supply, Richard Frizell, 2005/09/08
  - Re: [Amps] Screen Supply, Ian White G/GM3SEK, 2005/09/09
[Amps] W6PO 2m amp, Patrick Egloff, 2005/09/08
[Amps] YC-156 Triode, k7rdx, 2005/09/08
- Re: [Amps] YC-156 Triode, Larry Carman, 2005/09/08
- Re: [Amps] YC-156 Triode, W6RU, 2005/09/08
  - Re: [Amps] YC-156 Triode, k7rdx, 2005/09/08
  - Re: [Amps] YC-156 Triode, Larry Carman, 2005/09/09
[Amps] Ameritron AL 1200, dan r goddard, 2005/09/07
- Re: [Amps] Ameritron AL 1200, N7HIY, 2005/09/08
  - Re: [Amps] Ameritron AL 1200, Gary Smith, 2005/09/08
[Amps] Query: AC Switching of High voltage, w2cqm, 2005/09/07
- Re: [Amps] Query: AC Switching of High voltage, k7fm, 2005/09/07
  - Re: [Amps] Query: AC Switching of High voltage, Steve Thompson, 2005/09/07
- Re: [Amps] Query: AC Switching of High voltage, TexasRF, 2005/09/07
[Amps] Ameritron al 800H, dan r goddard, 2005/09/05
[Amps] L-4B Switch, Marv Gonsior, 2005/09/05
- Re: [Amps] L-4B Switch, Fortra, 2005/09/05
- Re: [Amps] L-4B Switch, Jim Brown, 2005/09/05
[Amps] Transformer identification?, ad5gb, 2005/09/05
[Amps] 813 info., Steve Thompson, 2005/09/05
- Re: [Amps] 813 info., ad5gb, 2005/09/05
[Amps] Xmtr output impedance?, StephenTetorka, 2005/09/05
- Re: [Amps] Xmtr output impedance?, Karl-Arne Markström, 2005/09/05
- Re: [Amps] Xmtr output impedance?, Peter Chadwick, 2005/09/05
- Re: [Amps] Xmtr output impedance?, StephenTetorka, 2005/09/06
Re: [Amps] CW and High Voltage, R . Measures, 2005/09/04
[Amps] SELL: Eimac 3-500/4-400 Aluminum Socket, w2cqm, 2005/09/04
[Amps] Wanted: Antenna Rotator, w2cqm, 2005/09/04
[Amps] Appraising Old Tubes, Michael Tope, 2005/09/03
- Re: [Amps] Appraising Old Tubes, Mike Sawyer, 2005/09/03
[Amps] Spike Caps, Rich, 2005/09/03
- Re: [Amps] Spike Caps, Will Matney, 2005/09/03
- Re: [Amps] Spike Caps, Will Matney, 2005/09/03
[Amps] 3CX800A7, Jim Brown, 2005/09/03
[Amps] RF Concepts 440 Alignment, Jim Brown, 2005/09/03
[Amps] Kon-Tiki, StephenTetorka, 2005/09/02
- Re: [Amps] Kon-Tiki, kenw2dtc, 2005/09/02
- Re: [Amps] Kon-Tiki, W2RU - Bud Hippisley, 2005/09/02
  - [Amps] CW and High Voltage, Steven Cook, 2005/09/03
    - Re: [Amps] CW and High Voltage, Bob Maser, 2005/09/03
    - Re: [Amps] CW and High Voltage, Steven Grant, W4IIV, 2005/09/03
    - Re: [Amps] CW and High Voltage, Steve Thompson, 2005/09/03
    - Re: [Amps] CW and High Voltage, Phil Clements, 2005/09/03
    - Re: [Amps] CW and High Voltage, Steven Cook, 2005/09/03
    - Re: [Amps] CW and High Voltage, Will Matney, 2005/09/03
    - Re: [Amps] CW and High Voltage, GGLL, 2005/09/03
    - Re: [Amps] CW and High Voltage, Will Matney, 2005/09/03
    - Re: [Amps] CW and High Voltage, Phil Clements, 2005/09/04
    - Re: [Amps] CW and High Voltage, Bob Maser, 2005/09/04
    - Re: [Amps] CW and High Voltage, R . Measures, 2005/09/04
    - Re: [Amps] CW and High Voltage, gdaught6, 2005/09/04
    - Re: [Amps] CW and High Voltage, R . Measures, 2005/09/04
    - Re: [Amps] CW and High Voltage, Phil Clements, 2005/09/04
    - Re: [Amps] CW and High Voltage, Phil Clements, 2005/09/04
    - Re: [Amps] CW and High Voltage, R . Measures, 2005/09/04
    - Re: [Amps] CW and High Voltage, Will Matney, 2005/09/04
    - Re: [Amps] CW and High Voltage, Jim Brown, 2005/09/04
    - Re: [Amps] CW and High Voltage, Steve Thompson, 2005/09/04
    - Re: [Amps] CW and High Voltage, Phil Clements, 2005/09/04
    - [Amps] Another Vintage Henry Question, Steven Cook, 2005/09/04
    - Re: [Amps] Another Vintage Henry Question, carl seyersdahl, 2005/09/04
    - Re: [Amps] CW and High Voltage, Iezzi Family, 2005/09/04
    - Re: [Amps] CW and High Voltage, Gary Schafer, 2005/09/05
    - Re: [Amps] CW and High Voltage, m.ford, 2005/09/05
    - Re: [Amps] CW and High Voltage, R . Measures, 2005/09/05
    - Re: [Amps] CW and High Voltage, Gary Schafer, 2005/09/05
    - Re: [Amps] CW and High Voltage, David Kirkby, 2005/09/06
  - Re: [Amps] Kon-Tiki, Karl-Arne Markström, 2005/09/03
    - Re: [Amps] Kon-Tiki, W2RU - Bud Hippisley, 2005/09/03
[Amps] more sb220 questions, John Adkins, 2005/09/02
Re: [Amps] Amps Digest, Vol 33, Issue 2, John Adkins, 2005/09/02
[Amps] Bird 43 PEP adapter, wc6w@juno.com, 2005/09/02
Re: [Amps] more sb220 questions, Will Matney, 2005/09/02
[Amps] N1BUG 2m amp, Steve Thompson, 2005/09/02
[Amps] Bias or Plate voltage change, GGLL, 2005/09/01
- Re: [Amps] Bias or Plate voltage change, Vic K2VCO, 2005/09/01
Re: [Amps] B and W FC15 filament choke, Alek Petkovic, 2005/09/01
- [Amps] power supply capacitors, mike kendall, 2005/09/03
  - Re: [Amps] power supply capacitors, Will Matney, 2005/09/03
  - Re: [Amps] power supply capacitors, Steve Thompson, 2005/09/04
[Amps] cleaning 8874 tubes, hcawthra, 2005/09/01