Amps
[Top] [All Lists]

Re: [Amps] [BULK] - Re: SB200 loading problem

To: amps@contesting.com
Subject: Re: [Amps] [BULK] - Re: SB200 loading problem
From: John Parkins <kvp@bigfoot.com>
Reply-to: John Parkins <john@g8kvp.com>
Date: Wed, 21 Sep 2005 09:24:46 +0100
List-post: <mailto:amps@contesting.com>
Hello Phil,

I'll add it to the list of things to do next time the amp is on the
bench, thanks.

Tuesday, September 20, 2005, 10:33:42 PM, you wrote:

PC>  
>> I had the same thought about 80 and the extra 'C' and changed it out
>> for a new one, I also tried increasing it's value and checked the
>> switch out but although everything was fine I still get the problem.
>> 
>> I've also tried switching the valves around, I have a spare set and
>> that did nothing at all either. You can see why I'm confused!
>> 
>> 
>> --
>> Best regards,
>>  John                            mailto:kvp@bigfoot.com

PC> John,
PC> Check out your anode RF Choke. If it has lowered in value (L) this could be
PC> the cause of trouble.

PC> (((73)))
PC> Phil, K5PC





-- 
Best regards,
 John                            mailto:kvp@bigfoot.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>