Towertalk
[Top] [All Lists]

Re: [TowerTalk] sealing PL259's

To: Mike Reublin NF4L <nf4l@comcast.net>
Subject: Re: [TowerTalk] sealing PL259's
From: mike stokes <mike9v@gmail.com>
Date: Mon, 25 May 2015 09:44:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have been using raincoat tape for over 20 years have never had it fail.
I bought quite a bit of it at Dayton but never could remember what it was
called and where I bought it,  This is good to know as I am almost out.

Mike
KK9V

On Mon, May 25, 2015 at 8:13 AM, Mike Reublin NF4L <nf4l@comcast.net> wrote:
I like the  self-fusing silicon tape. You can wind it so it forms a flange
against a bulk-head connector. I cover mine with a layer of Scotch 88 or 33
for xtra UV protection.

https://www.youtube.com/watch?v=fiI61EYGJyU

73, Mike NF4L
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>